AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8I-0338 CONTROL GP-THICKNESS -COUNTERCLOCKWISE S/N 9AL1-UP PART OF 243-1837 SCREED AR AN ATTACHMENT BG-225B


CONTROLS
CONTROL GP-THICKNESS
CROWN GP
ADJUSTER GP

ASPHALT PAVER BG-225B ASPHALT PAVER 6YK
 3054 Engine 6YK00001-UP (MACHINE) KEBP0111 BG-225B 6YK   (1993)

CONTROLS

CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7160 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0337 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0338 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0339 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0340 CONTROL GP-THICKNESS
 

#KEBP01110190
 

8I-0338: CONTROL GP-THICKNESS

8I-0338 CONTROL GP-THICKNESS -COUNTERCLOCKWISE
S/N 9AL1-UP
PART OF 243-1837 SCREED AR
AN ATTACHMENT
i00423741 KEBP0111
8I0338 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0898 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0906 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0910 [2] FILM-INSTRUCTION (MAT THICKNESS, CCW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01110191
 

8I-0339: CONTROL GP-THICKNESS

8I-0339 CONTROL GP-THICKNESS -CLOCKWISE ACME
S/N 9AL1-2026
AN ATTACHMENT
i00423745 KEBP0111
8I0339 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0900 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0907 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01110192
 

8I-0340: CONTROL GP-THICKNESS

8I-0340 CONTROL GP-THICKNESS -COUNTERCLOCKWISE ACME
S/N 9AL1-2026
AN ATTACHMENT
i00423749 KEBP0111
8I0340 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0901 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0908 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 2H-4337 [2] SCREW-DRIVE (NO 10X0.5-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01110193
 

197-5288: CROWN GP

197-5288 CROWN GP
S/N 9AL1-UP
PART OF 241-6806 SCREED AR
AN ATTACHMENT
i01447076 KEBP0111
1975288 CROWN GP Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
3. 3P-8680 [4] CUP-BEARING  
4. 3P-8681 [4] CONE-BEARING  
5. 5D-8412 [2] SCREW-ROUND HEAD (8-32X0.5-IN)  
6. 8I-0358 [1] POINTER  
7. 8I-0586 [1] BLOCK-TAKEUP  
8. 8I-0592 [1] SCALE-CROWN CONTROL  
9. 119-0750 [1] SPROCKET (12-TEETH)  
10. 190-5083 [1] BOLT-SPECIAL  
11. 193-1310 [2] BEARING GP-SCREED  
12. 197-9840 [1] COVER AS  
13. 197-9842 [1] PLATE  
14. 197-9844 Y [1] CHAIN GP-SCREED  
15. 197-9849 Y [1] SHAFT GP-DRIVE (REAR)  
16. 197-9850 Y [1] SHAFT GP-DRIVE (FRONT)  
17. 5J-3941 [2] PIN-SPRING  
18. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
21. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
22. 6K-3632 [2] LOCKNUT (1-8-THD)  
23. 8T-9384 [4] BOLT (1/2-13X0.875-IN)  
24. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
25. 8I-0740 [1] COUPLING GP  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
26. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
27. 102-2739 [1] KEY-SQUARE  
28. 197-5276 [1] BRACKET AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01110194
 

8I-0734: CROWN GP-MANUAL

8I-0734 CROWN GP-MANUAL
S/N 9AL1-2026
AN ATTACHMENT
i00424264 KEBP0111
8I0734 CROWN GP-MANUAL Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2728 [1] SHAFT AS-ADJUSTMENT  
2. 102-2714 [1] HANDLE  
3. 8T-7566 [2] PIN-SPRING  
4. 8I-0260 [1] WHEEL AS  
5. 135-8177 [1] LOCKOUT  
6. 8T-8908 [1] BOLT (1/4-20X1-IN)  
7. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
8. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#KEBP01110195
 

197-5278: CROWN GP-POWER

197-5278 CROWN GP-POWER
S/N 9AL1-UP
PART OF 244-3155, 244-3156 SCREED AR
Type 1
AN ATTACHMENT
i01478928 KEBP0111
1975278 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3729 Y [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01110196
 

197-5278: CROWN GP-POWER

197-5278 CROWN GP-POWER
S/N 9AL1-UP
PART OF 244-3155, 244-3156 SCREED AR
Type 2
AN ATTACHMENT
i02092600 KEBP0111
1975278 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-0474 CY [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01110197
 

197-5278: CROWN GP-POWER

197-5278 CROWN GP-POWER
S/N 9AL1-UP
PART OF 244-3155, 244-3156 SCREED AR
Type 3
AN ATTACHMENT
i04055370 KEBP0111
1975278 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-2004 CY [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01110198
 

245-2926: CROWN GP-POWER

245-2926 CROWN GP-POWER
S/N 9AL1-UP
24-VOLT
PART OF 243-1836, 243-1837 SCREED AR
AN ATTACHMENT
i02060953 KEBP0111
2452926 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3729 Y [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0746 [1] SUPPORT AS-MOTOR  
5. 8T-8920 [4] BOLT (1/2-13X3.25-IN)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6V-8188 [4] NUT (1/2-13-THD)  
8. 8I-0747 [1] SHAFT AS-ADJUSTMENT  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
9. 8I-0280 [1] KEEPER  
10. 8T-7566 [1] PIN-SPRING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01110199
 

185-4044: JACK GP-HEIGHT ADJUSTER

185-4044 JACK GP-HEIGHT ADJUSTER
S/N 9AL1-UP
PART OF 185-4061 SENSOR AR-GRADE
AN ATTACHMENT
i01281346 KEBP0111
1854044 JACK GP-HEIGHT ADJUSTER Parts scheme
  For full view, you need register

Parts for your BG-225B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-5440 [1] LOCKNUT (1/4-20-THD)  
2. 7X-5904 B [4] SHIM (0.035-IN THK)  
3. 7X-8846 [1] WASHER (13.5X34.9X1.52-MM THK)  
4. 8T-4994 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
5. 185-3965 [1] JACK GP-HEIGHT ADJUSTER  
6. 1F-0750 [1] NUT-WELD (3/8-16-THD)  
7. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
  B   USE AS REQUIRED
 

Information:

Caterpillar Parts SIS Catalog BG-225B :

CONTROL GP-THICKNESS
8I-0337 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7160 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7158 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7157 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4719 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4718 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
119-1408 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
115-5741 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0339 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0340 CONTROL GP-THICKNESS
CROWN GP
197-5288 CROWN GP
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP-POWER
197-5278 CROWN GP-POWER
CROWN GP-POWER
197-5278 CROWN GP-POWER
CROWN GP-POWER
197-5278 CROWN GP-POWER
CROWN GP-POWER
245-2926 CROWN GP-POWER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.