100-2879 HOUSING GP-FLYWHEEL S/N 11N7919-99999 PROVIDES HOLE FOR MAGNETIC PICKUP SENSOR PART OF 137-6567, 4P-9250 ENGINE AR SM-350

Pos.	Part No	Qty	Parts name
1.	371-0611	[1]	HOUSING AS-FLYWHEEL
2.	8M-9315	[2]	BUSHING
3.	9S-8005	[2]	PLUG (3/4-16-THD)
4.	3K-0360	[4]	SEAL-O-RING
5.	8T-6765	[2]	PLUG-PIPE (1/4-18-THD)
6.	9S-4182	[4]	PLUG (7/16-20-THD)
7.	3J-7354	[4]	SEAL-O-RING
8.	9S-4185	[2]	PLUG (3/4-16-THD)
9.	1W-3136	[1]	BAFFLE
10.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	0S-1594	[1]	BOLT (3/8-16X1-IN)
12.	9K-7290	[8]	BOLT-12 POINT HEAD (1/2-13X3.25-IN)
13.	155-5619	[1]	GASKET
14.	165-3930	[6]	BOLT (3/8-16X1.625-IN)
15.	165-3932	[5]	BOLT (3/8-16X2-IN)(3/8-16X2IN)
16.	5J-5793	[1]	BOLT-12 POINT HEAD (1/2-13X2-IN)
17.	165-3936	[2]	BOLT (3/8-16X4.5-IN)(3/8-16X4.5IN)
18.	4M-0189	[1]	SEAL-O-RING
19.	175-3721	[1]	COVER
20.	6H-1717	[2]	BOLT (1/2-13X1.125-IN)
21.	5P-8245	[11]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	6V-8260	[1]	SEAL-O-RING
23.	7N-8374	[1]	COVER-PUMP
24.	4B-4043	[2]	BOLT (5/8-11X1.375-IN)
25.	5P-8247	[2]	WASHER-HARD (17X32X3.5-MM THK)
26.	2P-2772	[1]	COVER
27.	234-8937	[1]	SEAL-INTEGRAL
28.	0S-1619	[1]	BOLT (3/8-16X3-IN)
29.	2A-1162	[1]	GASKET
30.	5F-0304	[1]	PLUG (FLYWHEEL HOUSING)

#KEBP01130031

1W-1468: HOUSING GP-FRONT

HOUSING GP-FRONT

1W-1468 HOUSING GP-FRONT
S/N 11N7919-16214
PART OF 137-6567, 4P-9250 ENGINE AR

i00147046 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-1469	[1]	HOUSING AS-GEAR
1A.	3K-3256 C	[4]	STUD-TAPERLOCK (3/8-16X1.7-IN)
1B.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
1C.	4M-2743 BC	[3]	STUD-TAPERLOCK (3/8-16-THD)
1D.	4M-2743 B	[2]	STUD-TAPERLOCK (3/8-16-THD)
1E.	3K-3256 B	[1]	STUD-TAPERLOCK (3/8-16X1.7-IN)
			-OR-
	6H-0406 B	[1]	STUD-TAPERLOCK (3/8-16X1.968-IN)
2.	1A-2029	[4]	BOLT (3/8-16X1.125-IN)
3.	1W-1471	[1]	PLATE
4.	166-9142	[1]	GASKET
5.	166-9146	[1]	GASKET
6.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
7.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
8.	0L-1352	[2]	BOLT (3/8-16X3.25-IN)
9.	0T-0055	[3]	BOLT (3/8-16X4.25-IN)
10.	5M-2894	[18]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	1N-3181	[2]	STUD-HOLLOW (3/8-16X1.476-IN)
	6B-2250	[2]	GASKET
12.	6N-0389	[1]	STUD (1/2-13X2.63-IN)
	4H-6145	[1]	GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#KEBP01130032

420-4422: KIT-ENGINE GASKET

KIT-ENGINE GASKET

420-4422 KIT-ENGINE GASKET
S/N 5FK1-103
CONTAINS GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@ 4P-9250@@@@@
FIELD INSTALLATION

i05215187 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-1162	[4]	GASKET (DRAIN PLUG)
2.	4H-6145	[1]	GASKET
3.	9Y-6089	[1]	GASKET
4.	161-7294	[1]	GASKET
5.	142-5868	[1]	SEAL-CRANKSHAFT (REAR)
6.	126-2702	[2]	SEAL-INTEGRAL
7.	198-6068	[2]	SEAL-INTEGRAL
8.	234-8937	[1]	SEAL-INTEGRAL
9.	9M-7539	[1]	SEAL-O-RING
10.	125-9794	[1]	SEAL-O-RING
11.	061-9456	[1]	SEAL-O-RING
12.	112-3540	[2]	SEAL-O-RING
13.	114-4427	[2]	SEAL-O-RING
14.	214-7568	[4]	SEAL-O-RING
15.	270-1820	[1]	SEAL-O-RING

			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

			HTTPS://DEALER.CAT.COM/RELATED

#KEBP01130033

473-2334: KIT-ENGINE GASKET

KIT-ENGINE GASKET

473-2334 KIT-ENGINE GASKET -WATER PUMP
S/N 11N7919-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION

i06113269 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Part No	Qty	Parts name
125-0434	[1]	SEAL-INTEGRAL
6V-8398	[1]	SEAL-O-RING
109-0093	[1]	SEAL-O-RING
6V-3250	[1]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING
109-0077	[1]	SEAL-O-RING
122-3772	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#KEBP01130034

553-2598: KIT-ENGINE GASKET

KIT-ENGINE GASKET

553-2598 KIT-ENGINE GASKET
S/N 11N7919-UP
CENTRAL AND LOWER STRUCTURE
FIELD INSTALLATION

i07349342 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Part No	Qty	Parts name
4N-0641	[1]	GASKET
4N-0699	[2]	GASKET
7C-0307	[1]	GASKET
7W-6081	[1]	GASKET
345-0412	[1]	GASKET
165-6170	[3]	PLUG
1V-6341	[1]	SEAL
114-2687	[1]	SEAL-O-RING
2N-3350	[1]	SEAL-O-RING
5P-5846	[2]	SEAL-O-RING
5P-8068	[1]	SEAL-O-RING
6V-3251	[2]	SEAL-O-RING
6V-3319	[1]	SEAL-O-RING
6V-5266	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
118-5068	[1]	SEAL-O-RING
291-8145	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#KEBP01130035

558-5443: KIT-ENGINE GASKET

KIT-ENGINE GASKET

558-5443 KIT-ENGINE GASKET
S/N 11N7919-UP
SINGLE CYLINDER HEAD
FIELD INSTALLATION

i07308087 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Part No	Qty	Parts name
2N-2765	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
1S-4295	[1]	GASKET (TURBOCHARGER)
2N-8204	[6]	GASKET
4N-0699	[1]	GASKET
6L-9589	[4]	GASKET
7C-0307	[1]	GASKET
4N-7253	[6]	GASKET-CHAMBER
6I-3066	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
6I-4024	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
391-2167	[4]	LOCKNUT-FLANGE (3/8X16-THD)
1V-6341	[1]	SEAL
3E-6772	[24]	SEAL (WATER)
5P-5678	[6]	SEAL
3S-5496	[4]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5P-7204	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
6V-9769	[4]	SEAL-O-RING
7L-4774	[6]	SEAL-O-RING
8C-5196	[2]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
109-0078	[2]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
203-3940	[6]	SEAL-O-RING
464-0509	[6]	SEAL-O-RING
313-9550	[4]	STUD-TAPERLOCK (3/8-16X2.165-IN)
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#KEBP01130036

4N-1331: LIFTING GP-ENGINE

LIFTING GP-ENGINE

4N-1331 LIFTING GP-ENGINE
S/N 11N7919-99999
PART OF 137-6567, 4P-9250 ENGINE AR

i00369910 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-4308	[1]	EYE-LIFTING (FRONT)
2.	0S-1595	[4]	BOLT (1/2-13X1.25-IN)
3.	4N-5186	[1]	EYE-LIFTING (REAR)
4.	0S-1594	[8]	BOLT (3/8-16X1-IN)
5.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)

#KEBP01130037

5N-5257: MOUNTING GP-ALTERNATOR

MOUNTING GP-ALTERNATOR

5N-5257 MOUNTING GP-ALTERNATOR
S/N 11N7919-99999
PART OF 137-6567, 4P-9250 ENGINE AR

i00385428 KEBP0113

5N5257 MOUNTING GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9N-0071	[1]	BRACKET
2.	5B-0213	[4]	BOLT (3/8-16X2.375-IN)
3.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	9L-6371	[1]	ROD
5.	9L-6329	[1]	BLOCK
6.	6B-6684	[2]	NUT-FULL (1/2-20-THD)
7.	0L-1329	[1]	BOLT (1/2-13X3-IN)
8.	2M-0849	[5]	WASHER-HARD (13.5X25.5X5-MM THK)
9.	9F-8759	[2]	SPACER (0.531X1.125X0.5-IN THK)
10.	1A-1460	[1]	BOLT (1/2-13X2-IN)
11.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
12.	9H-8260	[1]	BOLT (1/2-13X6.25-IN)
13.	7W-3580	[1]	BRACKET-MOUNTING
14.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
15.	9B-7237	[2]	BOLT (3/8-16X1.25-IN)
16.	7X-0294	[1]	BOLT (3/8-16X5-IN)
17.	9N-2554	[1]	SUPPORT-ALTERNATOR
18.	5S-7383	[1]	BOLT (3/8-16X1.75-IN)
19.	4B-4278 B	[3]	WASHER (10.2X20.5X1.6-MM THK)
20.	4N-8225	[1]	PULLEY-ALTERNATOR (1-GROOVE)
21.	6N-5338	[1]	V-BELT GP (ALTERNATOR)
22.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
23.	1F-7958 B	[1]	NUT-FULL (1/2-13-THD)
24.	2M-0849 B	[1]	WASHER-HARD (13.5X25.5X5-MM THK)
	B		USE AS REQUIRED

#KEBP01130038

6R-2452: MOUNTING GP-ENGINE

MOUNTING GP-ENGINE

6R-2452 MOUNTING GP-ENGINE
S/N 5FK1-103; 1RM1-59
PART OF 107-1128 INSTALLATION AR-ENGINE

i00781405 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-0418	[2]	BRACKET
2.	1K-6870	[2]	LOCKNUT (3/4-10-THD)
3.	6K-3632	[2]	LOCKNUT (1-8-THD)
4.	6Y-9960	[2]	MOUNT AS
5.	7X-0366	[8]	BOLT (3/4-10X2-IN)
6.	7X-0373	[2]	BOLT (3/4-10X5.5-IN)
7.	7X-0413	[2]	BOLT (1-8X7-IN)
8.	7X-0521	[12]	WASHER-HARD (20X36.5X5-MM THK)
9.	8T-5361	[4]	WASHER-HARD (28X49X5-MM THK)
10.	9W-6582	[2]	SLEEVE
11.	9W-6584	[4]	WASHER (20.5X114X10-MM THK)
12.	9W-7385	[2]	SLEEVE
13.	9W-7388	[4]	WASHER (26X144X12-MM THK)
14.	9W-9930	[2]	MOUNT AS
15.	1C-4750	[1]	FITTING
16.	9M-7958	[1]	CLAMP-HOSE
17.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
18.	8E-7089	[1]	COUPLING AS
19.	030-8535	[20]	BOLT-LOCKING (3/8-16X0.875-IN)
20.	5P-8244	[12]	WASHER-HARD (12X22.5X2.5-MM THK)
21.	1D-4703	[12]	BOLT (7/16-14X2.5-IN)
22.	0S-1594	[2]	BOLT (3/8-16X1-IN)
23.	8S-9008	[1]	SLEEVE
24.	8M-4432	[2]	SEAL-O-RING
25.	7G-5320	[1]	ELBOW
26.	1S-9799	[1]	SEAL-O-RING
27.	5P-1251 E		HOSE (13CM)
	E		ORDER BY THE CENTIMETER

#KEBP01130039

4N-0771: PAN GP-OIL

PAN GP-OIL

4N-0771 PAN GP-OIL
S/N 11N7919-16214
PART OF 137-6567, 4P-9250 ENGINE AR

i00122073 KEBP0113

For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-3661	[1]	GASKET-OIL PAN
2.	2P-3203 BC	[40]	BOLT-WASHER HEAD (3/8-16X1.25-IN)
3.	4P-0519	[1]	ADAPTER AS-DRAIN
	109-5840	[1]	ADAPTER-PLUG
3A.	109-5839	[1]	PLUG-DRAIN
4.	8T-6761 B	[1]	PLUG-PIPE (1-11-1/2 NPT THD)
5.	6V-3830	[1]	SEAL-O-RING
6.	0S-1587	[2]	BOLT (1/2-13X1.75-IN)
7.	8T-6761	[2]	PLUG-PIPE (1-11-1/2 NPT THD)
8.	150-4637	[1]	PAN-OIL
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE