AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-0491 PISTON & ROD GP S/N 11N7919-99999 14.5:1 RATIO PART OF 137-6567, 4P-9250 ENGINE AR SM-350 STABILIZER MIXER


BASIC ENGINE
PISTON & ROD GP
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
SUPPRESSION GP-SOUND
VALVE MECHANISM GP
LUBRICATION SYSTEM
BREATHER GP

STABILIZER MIXER SM-350 STABILIZER MIXER 1RM
 RM-350, SM-350 Reclaimer, Stabilizer Mixer 1RM00001-00059 (MACHINE) POWERED BY 3406C Engine KEBP0113 SM-350 1RM   (1993)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
7E-0491 PISTON & ROD GP
 

#KEBP01130040
 

7E-0491: PISTON & ROD GP

7E-0491 PISTON & ROD GP
S/N 11N7919-99999
14.5:1 RATIO
PART OF 137-6567, 4P-9250 ENGINE AR
i00396847 KEBP0113
7E0491 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 524-5564 [1] PIN-PISTON  
2. 7E-5665 J [2] RETAINER-PIN  
3. 7E-5996 [1] ROD AS-CONNECTING  
3A. 4P-8495 J [1] BUSHING  
3B. 219-4458 [2] PIN-DOWEL  
3C. 7E-4195 M [2] BOLT-CONNECTING ROD (M16X1.5X97-MM)  
4. 328-5573 [1] BEARING-CONNECTING ROD (STANDARD)  
  7E-0558 AB BEARING-CONNECTING ROD (0.635-MM US)  
  7E-0559 AB BEARING-CONNECTING ROD (1.27-MM US)  
5. 160-1131 J [1] BODY AS-PISTON  
6. 7N-7078 J [1] RING-PISTON (OIL CONTROL)  
7. 2P-2817 J [1] RING-PISTON (INTERMEDIATE)  
8. 346-3340 J [1] RING-PISTON (TOP)  
   
    AVAILABLE REPAIR KIT(S):
  442-5349 ABJ [1] KIT-ENGINE CYLINDER REPAIR  
    (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP01130041
 

4N-1045: ROCKER ARM GP

4N-1045 ROCKER ARM GP
S/N 11N7919-16214
PART OF 4W-2461 VALVE MECHANISM GP
i00122074 KEBP0113
4N1045 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 006-7403 [2] RING-RETAINING  
2. 2N-7228 [2] WASHER (1X1.5X0.03-IN THK)  
3. 4N-0955 [2] DOWEL  
4. 2N-7229 [2] SPRING  
5. 4N-0839 [1] SHAFT AS-ROCKER ARM  
5A. 0L-1022 [2] PLUG-CUP  
6. 2N-7228 B [2] WASHER (1X1.5X0.03-IN THK)  
7. 9Y-4384 [2] BRACKET-SHAFT  
8. 4N-5614 [6] ROCKER ARM AS  
9. 9Y-4383 [1] BRACKET-SHAFT  
10. 336-6781 [6] SCREW (3/8-24X4.78-IN)  
11. 9L-7712 [6] NUT (3/8-24-THD)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP01130042
 

319-0785: SEAL GP-CRANKSHAFT

319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 11N7919-99999
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
i02958100 KEBP0113
3190785 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-5868 J [1] SEAL-CRANKSHAFT (REAR)  
   
    CRANKSHAFT SEAL 366-6004 IS AVAILABLE FOR FLOODED CONDITIONS
  J   FOR USE WITH DRY CLUTCH APPLICATIONS
 

#KEBP01130043
 

319-7401: SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 11N7919-99999
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
i02957871 KEBP0113
3197401 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
 

#KEBP01130044
 

115-4785: SUPPORT GP-ENGINE

115-4785 SUPPORT GP-ENGINE
S/N 11N9638-UP
FRONT
PART OF 137-6567, 4P-9250 ENGINE AR
i00493071 KEBP0113
1154785 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-4779 [1] SUPPORT-ENGINE  
2. 2H-6488 [8] BOLT (1/2-13X5-IN)  
 

#KEBP01130045
 

6I-1712: SUPPORT GP-ENGINE

6I-1712 SUPPORT GP-ENGINE
S/N 11N7919-UP
PART OF 4P-9250 ENGINE AR
i00392590 KEBP0113
6I1712 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1711 [1] SUPPORT-ENGINE  
2. 2H-6488 [8] BOLT (1/2-13X5-IN)  
 

#KEBP01130046
 

115-2486: SUPPRESSION GP-SOUND

115-2486 SUPPRESSION GP-SOUND
S/N 5FK1-103; 1RM1-59
Type 1
AN ATTACHMENT
i00490791 KEBP0113
1152486 SUPPRESSION GP-SOUND Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-2796 [1] GRILL AS-SOUND SUPPRESSION  
2. 117-3496 [1] FOAM  
3. 118-0417 [7] FOAM  
4. 9X-2446 [1] FILM-IDENTIFICATION (CATERPILLAR)  
5. 9X-2453 E FILM (STRIPE)(45 CM)  
6. 118-1322 [2] FOAM  
7. 7T-0969 [1] HORN AS (24-VOLT, LOW TONE)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
8. 123-6545 [1] HARNESS AS  
9. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
11. 3S-2093 [3] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01130047
 

115-2486: SUPPRESSION GP-SOUND

115-2486 SUPPRESSION GP-SOUND
S/N 5FK1-103; 1RM1-59
Type 2
AN ATTACHMENT
i00490793 KEBP0113
1152486 SUPPRESSION GP-SOUND Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-2796 [1] GRILL AS-SOUND SUPPRESSION  
2. 117-3496 [1] FOAM  
3. 118-0417 [7] FOAM  
4. 9X-2448 [1] FILM-IDENTIFICATION (CATERPILLAR)  
5. 134-1710 C [1] SPRING-GAS  
6. 118-1322 [2] FOAM  
7. 7T-0969 [1] HORN AS (24-VOLT, LOW TONE)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
8. 123-6545 [1] HARNESS AS  
9. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
11. 3S-2093 [3] STRAP-CABLE  
12. 134-1709 C [1] SPRING-GAS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP01130048
 

4W-2461: VALVE MECHANISM GP

4W-2461 VALVE MECHANISM GP -ENGINE
S/N 11N7919-16214
PART OF 137-6567, 4P-9250 ENGINE AR
i00122123 KEBP0113
4W2461 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1045 Y [2] ROCKER ARM GP  
2. 101-1818 [6] BRIDGE AS-EXHAUST  
    (EACH INCLUDES)
2A. 2N-5842 [1] SCREW (3/8-24X1-IN)  
2B. 9L-7712 [1] NUT (3/8-24-THD)  
3. 5H-1504 [6] WASHER-HARD (20X33.5X5-MM THK)  
4. 2P-9845 [6] BOLT (3/4-16X11.5-IN)  
5. 4W-5998 [12] PUSHROD AS  
6. 305-6843 [12] SPRING-GUIDE  
7. 422-3883 [12] LIFTER AS-VALVE  
8. 101-1816 [6] BRIDGE AS-VALVE (INLET)  
    (EACH INCLUDES)
8A. 2N-5842 [1] SCREW (3/8-24X1-IN)  
8B. 9L-7712 [1] NUT (3/8-24-THD)  
8C. 4N-5607 [1] SEAT-WEAR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130049
 

2N-8220: BREATHER GP

2N-8220 BREATHER GP -CRANKCASE
S/N 11N7919-UP
PART OF 4P-9250 ENGINE AR
FOR USE WITH FUMES DISPOSAL GROUPS
i00107850 KEBP0113
2N8220 BREATHER GP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-2988 C [1] BREATHER AS (CRANKCASE)  
2. 2N-8109 [1] CLAMP  
3. 6V-3831 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Oil Buildup on Remanufactured Cylinder Packs{1225}
Oil Buildup on Remanufactured Cylinder Packs{1225}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Magazine
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog SM-350 :

PAN GP-OIL
4N-0771 PAN GP-OIL
MOUNTING GP-ENGINE
6R-2452 MOUNTING GP-ENGINE
MOUNTING GP-ALTERNATOR
5N-5257 MOUNTING GP-ALTERNATOR
LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
558-5443 KIT-ENGINE GASKET
553-2598 KIT-ENGINE GASKET
473-2334 KIT-ENGINE GASKET
KIT-ENGINE GASKET
420-4422 KIT-ENGINE GASKET
ROCKER ARM GP
4N-1045 ROCKER ARM GP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
SUPPORT GP-ENGINE
115-4785 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
6I-1712 SUPPORT GP-ENGINE
SUPPRESSION GP-SOUND
115-2486 SUPPRESSION GP-SOUND
SUPPRESSION GP-SOUND
115-2486 SUPPRESSION GP-SOUND
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP

Truck sale:

CATERPILLAR SM-350 1995
 
CATERPILLAR SM-350 1995
- STABILIZERS / RECLAIMERS
MANTRAC NIGERIA LTD
Nigeria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.