AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-7376 FASTENER GP-FUEL INJ PUMP -ENGINE S/N 11N7919-UP PART OF 4P-9250 ENGINE AR SM-350 STABILIZER MIXER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
LINES GP-FUEL
LINES GP-FUEL INJECTION

STABILIZER MIXER SM-350 STABILIZER MIXER 1RM
 RM-350, SM-350 Reclaimer, Stabilizer Mixer 1RM00001-00059 (MACHINE) POWERED BY 3406C Engine KEBP0113 SM-350 1RM   (1993)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
9Y-1234 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
7C-9081 PUMP GP-GOV & FUEL INJ
 

#KEBP01130090
 

1W-7376: FASTENER GP-FUEL INJ PUMP

1W-7376 FASTENER GP-FUEL INJ PUMP -ENGINE
S/N 11N7919-UP
PART OF 4P-9250 ENGINE AR
i00121991 KEBP0113
1W7376 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 5P-0076 [1] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
3. 034-4288 [2] BOLT-12 POINT HEAD (3/8-16X1.125-IN)  
4. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
5. 6V-3319 [1] SEAL-O-RING  
6. 5P-5846 [1] SEAL-O-RING  
7. 2N-3350 [1] SEAL-O-RING  
8. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
 

#KEBP01130091
 

9Y-1234: FASTENER GP-FUEL INJ PUMP

9Y-1234 FASTENER GP-FUEL INJ PUMP -GOVERNOR
S/N 11N7919-UP
PART OF 7C-9081 PUMP GP-GOV & FUEL INJ
i00169901 KEBP0113
9Y1234 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7040 [2] BOLT (1/4-20X1-IN)  
2. 8S-4710 [4] BOLT (1/4-20X4-IN)  
3. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
4. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
5. 7X-0869 [1] BOLT-LOCKING (1/4-20X2-IN)  
6. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
7. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
8. 1B-2716 [2] BOLT (1/4-20X5-IN)  
 

#KEBP01130092
 

4N-1981: FILTER GP-FUEL

4N-1981 FILTER GP-FUEL -ENGINE
S/N 11N7919-99999
PART OF 4P-9250 ENGINE AR
i00107917 KEBP0113
4N1981 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3789 C [1] BASE AS-FILTER (FUEL)  
2. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01130093
 

8H-7204: FILTER GP-FUEL

8H-7204 FILTER GP-FUEL
S/N 5FK1-103; 1RM1-59
PRIMARY
PART OF 108-6187 LINES GP-FUEL
i00108873 KEBP0113
8H7204 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3583 C [1] BASE-FUEL FILTER  
2. 7N-1628 C [1] NUT (3/8-24-THD)  
3. 2J-0157 C [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 7H-9678 [1] RETAINER-ELEMENT  
6. 2H-3429 [1] RING-RETAINING  
7. 7S-9323 [1] SPRING  
8. 8H-7202 [1] CASE AS-FUEL FILTER  
9. 9M-2342 [1] FILTER ELEMENT-FUEL (PRIMARY)  
10. 8H-2778 [1] SEAL-RING (FUEL FILTER BASE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01130094
 

2W-7325: GOVERNOR GP

2W-7325 GOVERNOR GP
S/N 11N7919-16214
PART OF 7C-9081 PUMP GP-GOV & FUEL INJ
i00158181 KEBP0113
2W7325 GOVERNOR GP Parts scheme 2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3256 [1] COLLAR-LOAD STOP  
2. 8L-5832 [2] NUT-HEX (10-32-THD)  
3. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 C [1] BOLT AS-SPECIAL (STOP)  
  7W-5835 [1] COLLAR  
7. 6D-3897 [1] BOLT (8-32X0.5-IN)  
8. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
9. 8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
10. 9S-8003 [1] PLUG (1/2-20-THD)  
11. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
12. 6V-5029 [1] SEAL-LIP TYPE  
13. 1N-3935 [1] COVER (IDLE-SPEED ADJ)  
14. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
15. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
16. 3P-0009 [1] INSULATOR  
17. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
18. 8N-3762 [1] COVER  
19. 7W-1749 [1] COVER AS  
  8S-6814 [2] PIN  
19A. 138-9507 [1] SEAL-LIP TYPE  
20. 1B-2713 [6] BOLT (1/4-20X1.75-IN)  
21. 4W-5735 [1] LEVER AS-PIVOT  
21A. 115-1249 [1] SETSCREW-SOCKET  
21B. 8L-5832 [1] NUT-HEX (10-32-THD)  
  4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
22. 8H-9204 [1] WASHER-FELT (19/32X7/8X5/16-IN THK)  
23. 2W-7400 C [1] SPRING  
24. 7N-1052 [1] DOWEL  
25. 7N-2176 [1] PIN-DETENT  
26. 4N-5621 [1] SHAFT-SHUTOFF  
27. 144-0480 [1] GASKET  
28. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
29. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
30. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
31. 8N-3760 [1] COVER  
32. 7W-4247 C [1] HOUSING AS-GOVERNOR  
32A. 8N-2499 [1] SPRING-GUIDE  
32B. 3D-8317 [1] RING-RETAINING  
32C. 4N-0260 [1] SEAL-LIP TYPE  
33. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
34. 8S-7803 [1] RING-RETAINING  
35. 2W-0801 [1] SHAFT  
36. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
  4N-5485 [1] BODY-VALVE  
36A. 6H-9691 [1] SEAL-O-RING  
36B. 5F-9144 [1] SEAL-O-RING  
36C. 4N-5484 [1] VALVE-NEEDLE  
37. 1J-9671 [1] SEAL-O-RING  
38. 1W-5341 [1] LEVER-SHUTOFF  
39. 2M-7819 [3] RING-RETAINING  
40. 7N-7270 [2] SLEEVE-SPRING  
41. 2W-2216 [1] SPRING-LINK  
42. 1N-3800 [1] SLEEVE-RACK CONTROL  
43. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
44. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  5P-9757 [1] SEAL-O-RING  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
  7C-0790 [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
45. 2W-0799 [1] SPRING-SHUTOFF  
46. 2W-0800 [1] LEVER-SHUTOFF  
47. 1N-3802 [1] SEAT-SPRING  
48. 1S-5440 [4] DOWEL  
49. 7M-7219 [1] BEARING-THRUST  
50. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
51. 4N-9019 [1] DOWEL  
52. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
53. 4N-2953 [1] RING-LOCK  
54. 133-8890 [2] RACE-NEEDLE BEARING  
55. 7E-3986 C [1] CARRIER-WEIGHT  
56. 119-8699 [4] WEIGHT-GOVERNOR  
57. 4N-0432 [1] BALL BEARING  
58. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
59. 4W-6868 C [1] RISER-GOVERNOR  
60. 3K-5733 [1] SPRING  
61. 7N-7269 [1] ACTUATOR AS-GOVERNOR  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  7N-7268 [1] SEAT-SPRING  
  4N-6410 [1] SPRING-DASHPOT  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
62. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
63. 6N-3504 [1] SEAT-GOVERNOR SPRING  
64. 7N-8821 [2] RING-RETAINING  
65. 1W-5339 [1] SHAFT AS-GOVERNOR  
66. 7W-1321 C [1] PLATE-THROTTLE (UPPER)  
67. 2W-9305 C [1] PLATE-THROTTLE (LOWER)  
68. 2W-6102 [1] LEVER-SPRING SEAT  
69. 5H-2532 [1] KEY-WOODRUFF  
70. 2W-9996 [1] SCREW-IDLE STOP (1/4-20X1.25-IN)  
71. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
72. 6V-8137 C [2] SCREW-BUTTON HEAD (10-24X1-IN)  
73. 7W-2000 C [1] STOP-DETENT  
74. 7W-1318 C [1] PLATE-RETAINING  
75. 2N-0828 [2] WASHER (SPRING)  
76. 5B-3180 [1] NUT (5/16-18-THD)  
77. 144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
78. 4K-9890 [1] WASHER (8.6X17.3X1.6-MM THK)  
79. 144-0478 [1] GASKET  
80. 8N-3761 [1] GASKET  
81. 8C-8564 [4] SCREW-LOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01130095
 

108-6187: LINES GP-FUEL

108-6187 LINES GP-FUEL
S/N 5FK1-103; 1RM1-59
PART OF 107-1128 INSTALLATION AR-ENGINE
i00484828 KEBP0113
1086187 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-4499 I [1] HOSE AS  
2. 1G-9087 I [1] HOSE AS  
3. 1G-9271 I [1] HOSE AS  
4. 1G-9086 I [1] HOSE AS  
5. 5E-8106 [1] PLATE  
6. 4L-6454 [1] BOLT (3/8-16X1-IN)  
7. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
9. 4J-8265 [2] NUT (3/8-16-THD)  
10. 5E-8918 [1] ADAPTER  
11. 6V-8397 [6] SEAL-O-RING  
12. 6V-8724 [1] ELBOW  
13. 3J-1907 [1] SEAL-O-RING  
14. 8H-7204 Y [1] FILTER GP-FUEL  
15. 8C-6871 [1] CONNECTOR  
16. 6V-8398 [2] SEAL-O-RING  
17. 3K-0360 [4] SEAL-O-RING  
18. 6V-8634 [3] CONNECTOR  
19. 6V-9850 [1] ELBOW  
20. 6V-8639 [1] CONNECTOR  
21. 8M-2773 [2] CLIP (LOOP)  
22. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
23. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
24. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-8908 [1] BOLT (1/4-20X1-IN)  
26. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
27. 6P-0699 [2] GROMMET  
28. 8S-0948 [1] CLIP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130096
 

2W-3452: LINES GP-FUEL FILTER

2W-3452 LINES GP-FUEL FILTER
S/N 11N7919-99999
PART OF 4P-9250 ENGINE AR
i00358712 KEBP0113
2W3452 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 364-9216 [1] ELBOW AS  
  7C-6459 [1] ELBOW-FLARED  
  214-7568 [1] SEAL-O-RING  
2. 2W-2927 [1] TUBE AS  
3. 2W-6458 [1] TUBE AS  
4. 3S-7189 C [1] BRACKET  
5. 0L-1351 C [1] BOLT (3/8-16X0.875-IN)  
6. 0S-1617 C [1] BOLT (5/16-18X0.75-IN)  
7. 191-7805 C [3] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
9. 307-2671 [1] PLUG AS  
  9S-8002 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
10. 313-9614 C [1] ADAPTER AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
11. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
12. 3E-4352 C [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
13. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
14. 4F-7957 C [1] BOLT (1/4-20X0.875-IN)  
15. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 5M-5926 C [2] CLAMP  
17. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 5P-8783 [2] STUD (3/8-24X1.67-IN)  
19. 5P-9297 C [1] CLIP (LOOP)  
20. 9S-8750 [1] NUT-FULL (1/4-20-THD)  
21. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
22. 9X-6458 C [2] WASHER-HARD (10.2X22.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01130097
 

136-7961: LINES GP-FUEL INJECTION

136-7961 LINES GP-FUEL INJECTION
S/N 11N7919-UP
PART OF 137-6567 ENGINE AR
i00147521 KEBP0113
1367961 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1396 [6] ADAPTER AS  
    (EACH INCLUDES)
  117-1385 [1] SEAL-O-RING  
2. 4W-7017 Y [6] NOZZLE AS-FUEL VALVE  
3. 7C-3427 [6] LINE AS-FUEL INJECTION  
4. 7W-2315 [6] RETAINER  
5. 9L-9814 [6] LOCKNUT  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130098
 

4P-9658: LINES GP-FUEL INJECTION

4P-9658 LINES GP-FUEL INJECTION
S/N 11N7919-UP
PART OF 4W-1566 LINES GP-FUEL INJECTION
i00122109 KEBP0113
4P9658 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7941 [1] LINE AS-FUEL INJECTION (NO.1 CYLINDER)  
2. 191-7942 [1] LINE AS-FUEL INJECTION (NO.2 CYLINDER)  
3. 1W-9169 [2] CLAMP-FUEL LINE (THREADED)  
  5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
4. 1W-9168 [7] CLAMP-FUEL LINE (NON-THREADED)  
5. 7M-9831 [3] SCREW-MACHINE (10-24X0.88-IN)  
6. 6V-7699 [6] WASHER-HARD (5.5X13X1.6-MM THK)  
7. 4B-2047 [3] NUT (10-24-THD)  
8. 1W-9167 [1] CLAMP AS-FUEL LINE  
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
 

#KEBP01130099
 

4P-9659: LINES GP-FUEL INJECTION

4P-9659 LINES GP-FUEL INJECTION
S/N 11N7919-UP
PART OF 4W-1566 LINES GP-FUEL INJECTION
i00122110 KEBP0113
4P9659 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7943 [1] LINE AS-FUEL INJECTION (NO.3 CYLINDER)  
2. 191-7944 [1] LINE AS-FUEL INJECTION (NO.4 CYLINDER)  
3. 1W-9168 [8] CLAMP-FUEL LINE (NON-THREADED)  
4. 1W-9169 [4] CLAMP-FUEL LINE (THREADED)  
5. 5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
6. 7M-9910 [2] SCREW-MACHINE (10-24X1-IN)  
7. 1W-9167 [2] CLAMP AS-FUEL LINE  
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
8. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
9. 104-3038 [2] SCREW-MACHINE  
10. 144-3517 [2] CLAMP AS  
    (EACH INCLUDES)
  2R-4761 [1] SLEEVE  
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
11. 4B-2047 [2] NUT (10-24-THD)  
12. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog SM-350 :

DRIVE GP-GOVERNOR & FUEL PUMP
4W-4619 DRIVE GP-GOVERNOR & FUEL PUMP
CONTROL GP-GOVERNOR
8N-2177 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
107-3124 CONTROL GP-GOVERNOR
TURBOCHARGER GP
7C-6624 TURBOCHARGER GP
TURBOCHARGER GP
7C-6615 TURBOCHARGER GP
SHIELD GP-MANIFOLD
9L-6671 SHIELD GP-MANIFOLD
PRECLEANER GP
7N-5974 PRECLEANER GP
MUFFLER GP
114-0331 MUFFLER GP
FASTENER GP-FUEL INJ PUMP
9Y-1234 FASTENER GP-FUEL INJ PUMP
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
GOVERNOR GP
2W-7325 GOVERNOR GP
LINES GP-FUEL
108-6187 LINES GP-FUEL
LINES GP-FUEL FILTER
2W-3452 LINES GP-FUEL FILTER
LINES GP-FUEL INJECTION
136-7961 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9658 LINES GP-FUEL INJECTION

Truck sale:

CATERPILLAR SM-350 1995
 
CATERPILLAR SM-350 1995
- STABILIZERS / RECLAIMERS
MANTRAC NIGERIA LTD
Nigeria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.