AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6R-2480 AXLE GP-DRIVE S/N 5FK1-103; 1RM1-59 PART OF 1G-8603 AXLE GP-DRIVE SM-350 STABILIZER MIXER


POWER TRAIN
AXLE GP
DIFFERENTIAL GP
TRANSMISSION GP
COOLER GP
DRIVE GP
HYDRAULIC AR-PROPEL
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC

STABILIZER MIXER SM-350 STABILIZER MIXER 1RM
 RM-350, SM-350 Reclaimer, Stabilizer Mixer 1RM00001-00059 (MACHINE) POWERED BY 3406C Engine KEBP0113 SM-350 1RM   (1993)

POWER TRAIN

AXLE GP
AXLE & MTG GP-DRIVE & STEERING
108-6239 AXLE & MTG GP-DRIVE & STEERING
AXLE GP-DRIVE
1G-8603 AXLE GP-DRIVE
AXLE GP-DRIVE
6R-2480 AXLE GP-DRIVE
MOUNTING GP-DRIVE AXLE
118-9439 MOUNTING GP-DRIVE AXLE
 

#KEBP01130190
 

6R-2480: AXLE GP-DRIVE

6R-2480 AXLE GP-DRIVE
S/N 5FK1-103; 1RM1-59
PART OF 1G-8603 AXLE GP-DRIVE
i00725802 KEBP0113
6R2480 AXLE GP-DRIVE Parts scheme 6R2480 AXLE GP-DRIVE Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8400 L [2] SPIDER  
2. 098-0735 [2] BUTTON  
3. 7R-8743 L [2] GEAR-SUN (17-TEETH)  
4. 077-6024 [2] WASHER  
5. 064-0980 [2] NUT-BEARING  
6. 064-0981 [2] WASHER  
7. 064-0979 [2] NUT-INNER ADJUSTMENT  
8. 086-8761 [2] GEAR (55-TEETH)  
9. 086-9780 [2] HUB  
10. 006-7006 [2] RING  
11. 2K-5065 [2] CONE-BEARING  
12. 5P-2526 [2] CUP-BEARING  
13. 1G-8401 L [2] HUB  
14. 2D-8496 [2] CUP-BEARING  
15. 077-6858 [2] CONE  
16. 098-8956 [2] SEAL AS  
17. 1G-8403 [2] DISC-BRAKE  
18. 6V-2360 [24] WASHER-HARD (20X32X3-MM THK)  
19. 151-2787 [24] BOLT  
20. 1G-8404 [2] SPINDLE-WHEEL  
21. 112-8168 [4] SEAL-OIL  
22. 1G-8405 [12] SHIM (0.003-IN THK)  
23. 1G-8406 [8] SHIM (0.005-IN THK)  
24. 1G-8407 [4] SHIM (0.01-IN THK)  
25. 1G-8408 [2] CAP-UPPER  
26. 081-9004 [16] SCREW-BOLT  
27. 3B-8485 [4] ELBOW  
28. 077-5330 [4] BUSHING-TERMINAL  
29. 119-4077 [1] JOINT AS (RH)  
  098-1068 [1] CROSS & BEARING AS  
30. 164-0884 J [4] CAP AS  
  164-0885 J [4] SEAL  
31. 077-4941 L [4] PLUG  
32. 077-4629 L [4] BUSHING-TERMINAL  
33. 1B-5174 [1] PLUG-PIPE  
34. 5F-5434 [1] VALVE AS-VENT  
35. [1] HOUSING-AXLE  
36. 068-2211 [12] WASHER  
37. 120-4228 [4] BOLT  
38. 120-4223 [8] BOLT  
39. 091-5599 [3] PLUG  
40. 1G-8412 L [2] CAP-LOWER  
41. 6V-8765 [36] WASHER-HARD (15X26X3-MM THK)  
42. 8S-4733 [36] BOLT (9/16-12X1.5-IN)  
43. 077-2900 [24] STUD  
44. 077-3196 [24] NUT  
45. 065-2802 [6] WASHER (38.89X65.07X1.56-MM THK)  
46. 7R-8986 L [6] PINION-PLANETARY (19-TEETH)  
47. 008-1959 L [6] WASHER  
48. 7R-5859 L [6] SHAFT  
49. 5E-0918 L [6] SEAL-O-RING  
50. 053-5655 [6] BUTTON-THRUST  
51. 7X-5591 [6] SETSCREW  
52. 053-5594 [60] WASHER (13.46X22.35X2.29-MM THK)  
53. 0S-1587 [60] BOLT (1/2-13X1.75-IN)  
54. 1G-8415 [1] TIE ROD  
55. 3B-4621 [2] PIN-COTTER  
56. 2F-8057 [2] NUT-SLOTTED  
57. 119-4076 [1] JOINT AS (LH)  
  098-1068 [1] CROSS & BEARING AS  
58. 1G-8418 Y [1] BRAKE GP-PARKING  
59. 101-8367 Y [1] CARRIER GP-DIFFERENTIAL  
60. 098-1068 [2] CROSS & BEARING AS  
61. 077-6458 L [2] WASHER  
62. 114-5036 [2] SCREW-STOP  
63. 081-9006 [2] NUT  
64. 132-3582 [1] KNUCKLE  
65. 132-3583 [1] KNUCKLE  
66. 111-8083 [1] DEFLECTOR-FLANGE  
67. 111-8082 [1] YOKE-FLANGE  
68. 111-8081 [1] YOKE-FLANGE  
70. 139-1432 [1] ROD END  
71. 139-1433 [1] ROD END  
72. 164-0886 J [1] JOINT AS (RH)  
  098-1068 J [1] CROSS & BEARING AS  
73. 164-0887 J [1] JOINT AS (LH)  
  098-1068 J [1] CROSS & BEARING AS  
74. 164-0903 J [1] COMPOUND  
75. 164-0888 J [2] HUB AS  
    (EACH INCLUDES)
  2D-8496 J [1] CUP-BEARING  
  5P-2526 J [1] CUP-BEARING  
76. 164-0902 J [4] PLUG-EXPANSION  
77. 164-0900 J [4] BUSHING AS  
78. 164-0893 J [2] GEAR-RING  
79. 164-0896 J [2] GEAR-SUN  
80. 164-0895 J [2] SPIDER AS  
82. 164-0894 J [6] SHAFT AS  
    (EACH INCLUDES)
  5E-0918 J [1] SEAL-O-RING  
83. 164-0898 J [6] PINION  
  J   USE ON MODIFIED AXLE ONLY (STAMPED WITH A "M" BEHIND MODEL NUMBER ON AXLE TAG)
  L   USED ON STANDARD AXLE ONLY
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130191
 

101-8367: CARRIER GP-DIFFERENTIAL

101-8367 CARRIER GP-DIFFERENTIAL
S/N 5FK1-103; 1RM1-59
PART OF 6R-2480 AXLE GP-DRIVE
i00464108 KEBP0113
1018367 CARRIER GP-DIFFERENTIAL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8502 Y [1] CARRIER GP-DIFFERENTIAL  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 9X-1813 BE SLEEVE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130192
 

1G-8502: CARRIER GP-DIFFERENTIAL

1G-8502 CARRIER GP-DIFFERENTIAL
S/N 5FK1-103; 1RM1-59
PART OF 101-8367 CARRIER GP-DIFFERENTIAL
i00351670 KEBP0113
1G8502 CARRIER GP-DIFFERENTIAL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-8047 [16] NUT  
2. 064-9079 [16] WASHER (16.76X26.92X2.29-MM THK)  
3. 111-8050 [1] FLANGE-HALF  
4. 111-8049 [1] FLANGE-HALF  
5. 111-8048 [1] GEAR-BEVEL  
6. 111-8051 [16] BOLT  
7. 118-5427 [2] WASHER-THRUST  
8. 118-5429 [2] GEAR-DIFFERENTIAL SIDE  
9. 063-8031 [4] WASHER-THRUST  
10. 111-8054 [4] PINION-DIFFERENTIAL  
11. 086-9776 [1] SPIDER  
12. 053-5594 [20] WASHER (13.46X22.35X2.29-MM THK)  
13. 111-8055 [12] BOLT  
14. 9W-7925 [1] BEARING AS-TAPERED ROLLER  
15. 111-8057 [1] CUP-BEARING  
16. 111-8058 [1] RING-ADJUSTMENT  
17. 111-8059 [1] COLLAR-CLUTCH  
18. 111-8060 [1] SPRING  
19. 111-8062 [2] PIN-SHIFT FORK  
20. 111-8061 [1] FORK  
21. 111-8063 [1] SHAFT-SHIFT  
22. 8T-2277 [1] DOWEL  
23. 2H-3927 [1] SEAL-O-RING  
24. 111-8066 [1] PISTON  
25. 111-8067 [1] RING-BACKUP  
26. 111-8068 [1] SEAL-PISTON  
27. 111-8069 [1] CYLINDER-PISTON  
28. 111-8070 [1] GASKET  
29. 111-8071 [1] CYLINDER  
30. 8M-2665 [1] BREATHER (DIFFERENTIAL)  
31. 160-8741 M [1] BOLT (M10X1.5X50-MM)  
32. 111-8074 [1] PLUG  
33. 111-8078 [4] WASHER  
34. 111-8110 [1] LOCKNUT  
35. 159-1638 [1] SWITCH (DIFFERENTIAL LOCK)  
36. 065-2746 [1] RING-BEARING  
37. 5E-0541 [1] BEARING  
38. 111-8108 B [1] SHIM-CAGE (0.5-MM THK)  
  111-8107 B [1] SHIM-CAGE (0.2-MM THK)  
  111-8106 B [1] SHIM-CAGE (0.125-MM THK)  
  111-8105 [1] SHIM-CAGE (0.075-MM THK)  
39. 077-5088 [1] CONE & ROLLER AS  
40. 1B-4038 [1] CUP-BEARING  
41. 111-8101 B [2] SPACER (9.2-MM THK)  
  111-8100 B [2] SPACER (9.18-MM THK)  
  111-8099 B [2] SPACER (9.15-MM THK)  
  111-8098 B [2] SPACER (9.13-MM THK)  
  111-8097 B [2] SPACER (9.1-MM THK)  
  111-8096 B [2] SPACER (8.98-MM THK)  
  111-8095 B [2] SPACER (8.85-MM THK)  
  111-8094 B [2] SPACER (8.83-MM THK)  
  111-8093 B [2] SPACER (8.8-MM THK)  
  111-8092 B [2] SPACER (8.78-MM THK)  
  111-8091 B [2] SPACER (8.75-MM THK)  
42. 111-8090 [1] KIT-SPACER  
43. 111-8089 [1] BEARING-CAGED  
44. 4L-7249 [1] CUP-BEARING  
45. 111-8085 [1] CONE-BEARING  
46. 111-8084 [1] SEAL-OIL  
47. 111-8118 [4] WASHER  
48. 111-8077 [4] BOLT  
49. 6V-5684 M [8] BOLT (M12X1.75X45-MM)  
50. 054-5495 [1] WASHER  
51. 111-8079 [1] NUT-BEVEL PINION  
52. 111-8111 [1] CARRIER-DIFFERENTIAL  
53. 111-8112 [1] SCREW-THRUST  
54. 030-0061 [1] CONE-BEARING  
55. 030-0060 [1] CUP-BEARING  
56. 111-8121 [1] BEARING  
57. 063-6695 [4] DOWEL-CAP  
58. 111-8114 [1] PIN-ADJUSTMENT  
59. 098-4078 [1] PIN-COTTER  
60. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
61. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
62. 9X-1813 [1] SLEEVE  
63. 8T-0070 M [4] BOLT (M20X2.5X120-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP01130193
 

1G-6748: CLUTCH GP

1G-6748 CLUTCH GP -HIGH/LOW
S/N 5FK1-103; 1RM1-59
PART OF 6R-2482 TRANSMISSION GP
i00351228 KEBP0113
1G6748 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-7755 [2] BEARING  
2. 1G-6754 [4] BEARING  
3. 1G-6755 [1] HUB & GEAR AS (52, 46-TEETH)  
4. 6Y-6443 [2] RETAINER  
5. 068-7248 [2] RING-SNAP  
6. 9W-4954 [12] DISC-FRICTION  
7. 1G-6751 [12] SPRING  
8. 069-5722 [12] PLATE-SEPARATOR  
9. 1G-6750 [2] RING-BACKUP  
10. 8C-7446 [2] SEAL-LIP TYPE  
11. 8C-7737 [2] PISTON AS  
12. 1G-6756 [1] GEAR-CLUTCH HUB (52, 29-TEETH)  
13. 7T-3630 [3] RING-SEAL  
14. 1G-6752 [2] SPACER  
15. 1G-6753 [4] RING-SNAP  
16. 1G-6749 [1] SHAFT AS-INPUT (CLUTCH)  
 

#KEBP01130194
 

4N-1559: COOLER GP-TRANSMISSION OIL

4N-1559 COOLER GP-TRANSMISSION OIL
S/N 11N7919-99999
PART OF 137-6567, 4P-9250 ENGINE AR
i00122075 KEBP0113
4N1559 COOLER GP-TRANSMISSION OIL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2001 [1] PLATE AS  
  6B-0430 [2] BOSS  
2. 295-5609 [2] SEAL-O-RING  
3. 4B-3388 [8] BOLT (5/16-18X1.125-IN)  
4. 132-8594 [1] CORE AS-OIL COOLER (TRANSMISSION)  
5. 4L-1267 [1] GASKET  
6. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP01130195
 

124-7421: DRIVE AR-REAR

124-7421 DRIVE AR-REAR
S/N 5FK1-103
AN ATTACHMENT
i00519044 KEBP0113
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  123-8954 Y [1] DRIVE GP-WHEEL  
  124-6917 Y [1] LINES GP-HYDROSTATIC  
  124-7419 Y [1] SUPPORT GP-LINES  
  124-6916 Y [1] VALVE & MTG GP-REAR DRIVE  
  124-6918 Y [1] WHEEL & TIRE GP  
  125-9266 Y [1] WIRING GP-REAR DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130196
 

124-7422: DRIVE AR-REAR

124-7422 DRIVE AR-REAR
S/N 1RM1-59
AN ATTACHMENT
i00519045 KEBP0113
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  123-8954 Y [1] DRIVE GP-WHEEL  
  124-6917 Y [1] LINES GP-HYDROSTATIC  
  124-7419 Y [1] SUPPORT GP-LINES  
  124-6916 Y [1] VALVE & MTG GP-REAR DRIVE  
  124-6924 Y [1] WHEEL & TIRE GP  
  125-9266 Y [1] WIRING GP-REAR DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130197
 

123-8954: DRIVE GP-WHEEL

123-8954 DRIVE GP-WHEEL
S/N 5FK1-103; 1RM1-59
PART OF 124-7421, 124-7422 DRIVE AR-REAR
AN ATTACHMENT
i00515830 KEBP0113
1238954 DRIVE GP-WHEEL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-8957 Y [2] MOTOR GP-PISTON  
2. 7X-0374 [16] BOLT (3/4-10X5.75-IN)  
3. 8T-4994 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 6V-8182 [16] NUT (3/4-10-THD)  
5. 113-5076 [1] LEG AS  
6. 122-2249 [1] LEG AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130198
 

107-1139: HYDRAULIC AR-PROPEL

107-1139 HYDRAULIC AR-PROPEL
S/N 5FK1-103; 1RM1-59
PART OF 106-7477, 109-9700 GENERAL AR
i00493703 KEBP0113
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-4788 Y [1] LINES GP-HYDROSTATIC  
  107-1140 Y [1] LINES GP-OIL COOLER  
  1G-9232 Y [1] MOTOR & MTG GP-PROPEL  
  109-1667 Y [1] PUMP & MTG GP-PROPEL  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01130199
 

110-4788: LINES GP-HYDROSTATIC

110-4788 LINES GP-HYDROSTATIC
S/N 5FK1-103; 1RM1-59
PART OF 107-1139 HYDRAULIC AR-PROPEL
i00470736 KEBP0113
1104788 LINES GP-HYDROSTATIC Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-4194 I [1] HOSE AS  
2. 110-2016 I [1] HOSE AS  
3. 110-1986 I [1] HOSE AS  
4. 7X-9733 [2] FITTING  
5. 5E-8841 [4] FLANGE-SPLIT  
6. 0T-0768 [16] BOLT (7/16-14X1.75-IN)  
7. 5P-8244 [16] WASHER-HARD (12X22.5X2.5-MM THK)  
8. 1P-5766 [4] FLANGE-HALF  
9. 6V-8637 [2] CONNECTOR  
10. 6V-9853 [1] ELBOW  
11. 7R-7939 [2] CLAMP-PIPE  
12. 1P-3703 [2] SEAL-RECTANGULAR  
13. 5K-9090 [2] SEAL-O-RING  
14. 6V-9746 [3] SEAL-O-RING  
15. 7X-0264 [4] BOLT (1/4-20X2.5-IN)  
16. 3D-2824 [2] SEAL-O-RING  
17. 5V-6152 [4] CLAMP  
18. 7R-7955 [1] PLATE (SLOTTED)  
19. 7R-7960 [2] BOLT (1/4-20X2-IN)  
20. 7R-7951 [2] PLATE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12

Caterpillar Parts SIS Catalog SM-350 :

AXLE GP-DRIVE
1G-8603 AXLE GP-DRIVE
AXLE & MTG GP-DRIVE & STEERING
108-6239 AXLE & MTG GP-DRIVE & STEERING
WIRING GP-REAR DRIVE
125-9266 WIRING GP-REAR DRIVE
WIRING GP-REAR
119-5768 WIRING GP-REAR
WIRING GP-REAR
108-7026 WIRING GP-REAR
WIRING GP-FRONT
108-7028 WIRING GP-FRONT
WIRING GP-CONSOLE
119-5766 WIRING GP-CONSOLE
WIRING GP-CONSOLE
114-6405 WIRING GP-CONSOLE
CARRIER GP-DIFFERENTIAL
101-8367 CARRIER GP-DIFFERENTIAL
CARRIER GP-DIFFERENTIAL
1G-8502 CARRIER GP-DIFFERENTIAL
CLUTCH GP
1G-6748 CLUTCH GP
COOLER GP-TRANSMISSION OIL
4N-1559 COOLER GP-TRANSMISSION OIL
124-7421 DRIVE AR-REAR
124-7422 DRIVE AR-REAR
DRIVE GP-WHEEL
123-8954 DRIVE GP-WHEEL
107-1139 HYDRAULIC AR-PROPEL

Truck sale:

CATERPILLAR SM-350 1995
 
CATERPILLAR SM-350 1995
- STABILIZERS / RECLAIMERS
MANTRAC NIGERIA LTD
Nigeria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.