AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CS-531 VIBRATORY COMPACTOR 3WM00001-UP (MACHINE) POWERED BY 3116 ENGINE POWER TRAIN Caterpillar SIS



VIBRATORY COMPACTOR CS-531 VIBRATORY COMPACTOR 3WM
 CS-531 VIBRATORY COMPACTOR 3WM00001-UP (MACHINE) POWERED BY 3116 ENGINE KEBP0116 CS-531 3WM   (1993)

Parts group CS-531:

  For full view, you need register
POWER TRAIN
AXLE GP
AXLE GP
1G-8361 AXLE GP
1G8361 AXLE GP-PART 1 OF 2
S/N 3WM1-59
PART OF 1G7494 DRIVE-WHEEL
1G-8361 AXLE GP
1G8361 AXLE GP-PART 2 OF 2
S/N 3WM1-59
PART OF 1G7494 DRIVE-WHEEL
AXLE GP
117-7530 AXLE GP
1177530 AXLE GP-PART 1 OF 2
TYPE 1. S/N3WM60-UP
PART OF 1G7494 DRIVE-WHEEL
117-7530 AXLE GP
1177530 AXLE GP-PART 2 OF 2
TYPE 1. S/N3WM60-UP
PART OF 1G7494 DRIVE-WHEEL
AXLE GP
117-7530 AXLE GP
1177530 AXLE GP-PART 1 OF 2
TYPE 2. S/N3WM60-UP
PART OF 1G7494 DRIVE-WHEEL
117-7530 AXLE GP
1177530 AXLE GP-PART 2 OF 2
TYPE 2. S/N3WM60-UP
PART OF 1G7494 DRIVE-WHEEL
DRIVE TRAIN GP
108-3967 POWER TRAIN AR
1083967 POWER TRAIN AR
DRIVER GP
DRIVE GP-WHEEL
1G-7494 DRIVE GP-WHEEL
1G7494 DRIVE GP-WHEEL
S/N 3WM1-59
1G8361-PAGE 92,7X8448-PAGE 96,7X8144-PAGE 97
DRIVE GP-WHEEL
1G-7494 DRIVE GP-WHEEL
1G7494 DRIVE GP-WHEEL
S/N 3WM60-UP
7X8144-PAGE 1177530-PAGE 1124722-PAGE
DRUM GP
110-4175 DRUM GP-SMOOTH
1104175 DRUM GP-SMOOTH
PART OF 1083967 POWER TRAIN AR
SUPPORT GP-DRUM
108-2794 SUPPORT GP-DRUM
1082794 SUPPORT GP-DRUM
1G9443-PAGE 86
PART OF 1104175 DRUM-SMOOTH
MOUNTING GP-DRUM
108-2788 MOUNTING GP-DRUM
1082788 MOUNTING GP-DRUM
PART OF 1083967 POWER TRAIN AR
DRUM GP-SMOOTH
108-2792 DRUM GP-SMOOTH
1082792 DRUM GP-VIBRATORY
PART OF 1104175 DRUM-SMOOTH
GEARBOX GP
GEARBOX GP-VIBRATORY
1G-8830 GEARBOX GP-VIBRATORY
1G8830 GEAR BOX GP
PART OF 1082791 DRIVE-VIBRATORY
GEARBOX GP-DRUM DRIVE
1G-9443 GEARBOX GP-DRUM DRIVE
1G9443 GEARBOX GP
PART OF 1082794 SUPPORT-DRUM
GEARBOX GP-WHEEL DRIVE
7X-8144 GEARBOX GP-WHEEL DRIVE
7X8144 GEARBOX GP
PART OF 1G7494 DRIVE-WHEEL
LINES GP-PROPEL
LINES GP-PROPEL
108-3945 LINES GP-PROPEL
1083945 LINES GP-PROPEL
PART OF 1083941 HYDRAULIC AR-PROPEL
MOTOR GP
MOTOR & MTG GP-PROPEL
108-4088 MOTOR & MTG GP-PROPEL
1084088 MOTOR & MOUNTING GP
S/N 3WM1-58
1084090-PAGE 108
PART OF 1083941 HYDRAULIC AR-PROPEL
MOTOR & MTG GP-PROPEL
108-4088 MOTOR & MTG GP-PROPEL
1084088 MOTOR & MOUNTING GP
S/N 3WM59-UP
1235260-PAGE 109.01
PART OF 1083941 HYDRAULIC AR-PROPEL
MOTOR GP-PROPEL
108-4090 MOTOR GP-PROPEL
1084090 MOTOR GP
7R3708-PAGE 110
PART OF 1084088 MOUNTING MOTOR
MOTOR GP-PROPEL
123-5260 MOTOR GP-PROPEL
1235260 MOTOR GP-PISTON
1374581-PAGE 111
PART OF 1084088 MOTOR & MOUNTING
ROTATING GP-MOTOR
7R-3708 ROTATING GP-MOTOR
7R3708 ROTARY GP
PART OF 1084090 MOTOR
ROTATING GP-MOTOR
137-4581 ROTATING GP-MOTOR
1374581 ROTATING GP-MOTOR
PART OF 1235260 MOTOR-PISTON
PUMP GP
PUMP & MTG GP-PROPEL
108-3942 PUMP & MTG GP-PROPEL
1083942 PUMP & MOUNTING GP
1084092-PAGE 118
PART OF 1083941 HYDRAULIC AR-PROPEL
TRANSMISSION GP
GUARD GP-TRANSMISSION
087-0776 GUARD GP-TRANSMISSION
870776 GUARD GP-TRANSMISSION
AN ATTACHMENT
VALVE GP-SHIFT
VALVE GP-BRAKE & SHIFT
1G-9759 VALVE GP-BRAKE & SHIFT
1G9759 VALVE GP
BRAKE/SHIFT
PART OF 1G9630 VALVE-MOUNTING
WHEEL GP
WHEEL & TIRE GP
7X-8101 WHEEL & TIRE GP
7X8101 WHEEL & TIRE GP
BALLAST GP-WHEEL
109-2974 BALLAST GP-WHEEL
1092974 BALLAST GP

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Axle Propulsion Motor
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Rear Axle Assembly
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Axle
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
Procedure To Tighten Bolts And To Shim Rear Drive Axle Is Available{3278}
1995/05/01
Seal Added To Oscillation Bearing Joint {6604,3278}
1996/09/02
Correct Procedure To Adjust Rear Axle Brake Actuators {4267,4004}
1997/02/10
Procedure To Tighten Bolts And To Shim The Rear Drive Axle Is Available {3278}
1999/11/22
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors˜ {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors˜ {3282}
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Magazine
Adding Vibratory Lock Out Function In Vibratory System{1435,3220,5653}
1995/08/28
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Specifications
Gearbox Group
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Gearbox
CS-531 VIBRATORY COMPACTORS VIBRATION SYSTEM
Service Magazine
Procedure To Tighten Bolts And To Shim Rear Drive Axle Is Available{3278}
1995/05/01
Seal Added To Oscillation Bearing Joint {6604,3278}
1996/09/02
Procedure To Tighten Bolts And To Shim The Rear Drive Axle Is Available {3278}
1999/11/22
Special Instruction
Eccentric Weight Housing Flushing Procedure{6605}
Eccentric Weight Housing Flushing Procedure{6605}
Service Letter-NACD
Product Support Program For Replacing The Vibratory Drum Bearings And Shafts On Certain CP531, CP533, CS533, CP563, CS563, CS573, And CS583 Compactors
Product Support Program For Replacing The Vibratory Drum Bearings And Shafts On Certain CP531, CP533, CS533, CP563, CS563, CS573, And CS583 Compactors
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Drum Assembly
CS-531 VIBRATORY COMPACTORS VIBRATION SYSTEM
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Service Letter-China
Product Support Program For Replacing The Vibratory Drum Bearings And Shafts On Certain CP531, CP533, CS533, CP563, CS563, CS573, And CS583 Compactors
Product Support Program For Replacing The Vibratory Drum Bearings And Shafts On Certain CP531, CP533, CS533, CP563, CS563, CS573, And CS583 Compactors
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Drum
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Drum Support Housings (Earlier)
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Drum Support Housings (Later)
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
Bearing Surfaces For Vibratory Weight Shafts Are Now Induction Hardened {6606}
1994/05/02
Special Instruction SEHS9880, Drum Assembly Wall Chart QEWQ9168 And Video QEVN9170 Are For The Flushing And Rebuilding Of Compactor Drums {6605}
1997/02/03
Correct Oil for the Eccentric Weight Housing {6605, 6606}
2000/07/10
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Service Letter-NACD
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Disassembly and Assembly
Charge Oil Filter
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
133-5342 Filter Indicator Available In 122-1787 Service Indicator {5068}
1996/07/01
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Special Instruction SEHS9880, Drum Assembly Wall Chart QEWQ9168 And Video QEVN9170 Are For The Flushing And Rebuilding Of Compactor Drums {6605}
1997/02/03
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Gearbox Group
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Gearbox
CS-531 VIBRATORY COMPACTORS VIBRATION SYSTEM
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Special Instruction SEHS9880, Drum Assembly Wall Chart QEWQ9168 And Video QEVN9170 Are For The Flushing And Rebuilding Of Compactor Drums {6605}
1997/02/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Specifications
Return Manifold
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Specifications
Rear Axle Assembly
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Maintenance Intervals Are More Uniform{0375,1300,1350,3250,5600,6600}
1995/01/16
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Axle Propulsion Motor
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Axle Propel Motor
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
New Propel Pump Manifold Gasket Improves Service Life{5070,4350}
1995/07/24
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Specifications
Axle Propulsion Motor
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Propulsion Pump
CS-531 VIBRATORY COMPACTORS PROPULSION SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Propel Pump
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Pump Separation From Engine (Propel, Vibration &amp; Steering)
SUPPLEMENT FOR 3116 ENGINE CS-531 VIBRATORY COMPACTOR
Service Magazine
New Propel Pump Manifold Gasket Improves Service Life{5070,4350}
1995/07/24
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Measure Vibration Of Vibratory Compactor Drums With Hand Held Meters{7471,0783}
1996/11/18
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Assembly &amp; Installation Of Conventional Duo-Cone Seals
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Axle Gear Reducer
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Seal Added To Oscillation Bearing Joint {6604,3278}
1996/09/02
Procedure To Tighten Bolts And To Shim The Rear Drive Axle Is Available {3278}
1999/11/22
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
New Propel Pump Manifold Gasket Improves Service Life{5070,4350}
1995/07/24
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Brake/Shift Valve
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
Adding Vibratory Lock Out Function In Vibratory System{1435,3220,5653}
1995/08/28
New Propel Pump Manifold Gasket Improves Service Life{5070,4350}
1995/07/24
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Special Instruction
Dismounting and Mounting Tires on the Single Piece Drop Center Rims{4202}
Dismounting and Mounting Tires on the Single Piece Drop Center Rims{4202}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Disassembly and Assembly
Wheel Assembly
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
Procedure To Tighten Bolts And To Shim Rear Drive Axle Is Available{3278}
1995/05/01
Seal Added To Oscillation Bearing Joint {6604,3278}
1996/09/02
Verify Offset Dimension When Ordering New Wheel Assembly {4209,4202}
1997/01/27
Procedure To Tighten Bolts And To Shim The Rear Drive Axle Is Available {3278}
1999/11/22
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Assembly &amp; Installation Of Conventional Duo-Cone Seals
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Axle Gear Reducer
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS
Service Magazine
Procedure To Tighten Bolts And To Shim Rear Drive Axle Is Available{3278}
1995/05/01
Seal Added To Oscillation Bearing Joint {6604,3278}
1996/09/02
Procedure To Tighten Bolts And To Shim The Rear Drive Axle Is Available {3278}
1999/11/22
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.