AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

222-7157 CONTROL GP-THICKNESS -COUNTERCLOCKWISE S/N 9AL1-UP; 1PM1-UP AN ATTACHMENT AP-800C ASPHALT PAVER


CONTROLS
CONTROL GP-THICKNESS
CROWN GP

ASPHALT PAVER AP-800C ASPHALT PAVER 1PM
 CATERPILLAR AP-800C BARBER-GREENE BG-230 Asphalt Pavers 1PM00001-UP (MACHINE) POWERED BY 3054 Engine KEBP0122 AP-800C 1PM   (1993)

CONTROLS

CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4718 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4719 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7157 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7158 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7160 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0337 CONTROL GP-THICKNESS
 

#KEBP01220190
 

222-7157: CONTROL GP-THICKNESS

222-7157 CONTROL GP-THICKNESS -COUNTERCLOCKWISE
S/N 9AL1-UP; 1PM1-UP
AN ATTACHMENT
i01788126 KEBP0122
2227157 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0898 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 222-7153 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0910 [2] FILM-INSTRUCTION (MAT THICKNESS, CCW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01220191
 

222-7158: CONTROL GP-THICKNESS

222-7158 CONTROL GP-THICKNESS -CLOCKWISE
S/N 9AL1-UP; 1PM1-UP
AN ATTACHMENT
i01788189 KEBP0122
2227158 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0899 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 222-7154 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01220192
 

222-7160: CONTROL GP-THICKNESS

222-7160 CONTROL GP-THICKNESS -COUNTERCLOCKWISE ACME
S/N 9AL1-UP; 1PM1-UP
AN ATTACHMENT
i01788198 KEBP0122
2227160 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0901 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 222-7156 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01220193
 

8I-0337: CONTROL GP-THICKNESS

8I-0337 CONTROL GP-THICKNESS -CLOCKWISE
S/N 9AL1-UP; 1PM1-UP
PART OF 243-1836 SCREED AR
AN ATTACHMENT
i00423736 KEBP0122
8I0337 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0899 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0905 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01220194
 

8I-0338: CONTROL GP-THICKNESS

8I-0338 CONTROL GP-THICKNESS -COUNTERCLOCKWISE
S/N 9AL1-UP; 1PM1-UP
PART OF 243-1837 SCREED AR
AN ATTACHMENT
i00423741 KEBP0122
8I0338 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0898 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0906 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0910 [2] FILM-INSTRUCTION (MAT THICKNESS, CCW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01220195
 

8I-0339: CONTROL GP-THICKNESS

8I-0339 CONTROL GP-THICKNESS -CLOCKWISE ACME
S/N 9AL1-2026; 1PM1-UP
AN ATTACHMENT
i00423745 KEBP0122
8I0339 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0900 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0907 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01220196
 

8I-0340: CONTROL GP-THICKNESS

8I-0340 CONTROL GP-THICKNESS -COUNTERCLOCKWISE ACME
S/N 9AL1-2026; 1PM1-UP
AN ATTACHMENT
i00423749 KEBP0122
8I0340 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0901 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0908 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 2H-4337 [2] SCREW-DRIVE (NO 10X0.5-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01220197
 

197-5288: CROWN GP

197-5288 CROWN GP
S/N 9AL1-UP; 1PM1-UP
PART OF 241-6806 SCREED AR
AN ATTACHMENT
i01447076 KEBP0122
1975288 CROWN GP Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
3. 3P-8680 [4] CUP-BEARING  
4. 3P-8681 [4] CONE-BEARING  
5. 5D-8412 [2] SCREW-ROUND HEAD (8-32X0.5-IN)  
6. 8I-0358 [1] POINTER  
7. 8I-0586 [1] BLOCK-TAKEUP  
8. 8I-0592 [1] SCALE-CROWN CONTROL  
9. 119-0750 [1] SPROCKET (12-TEETH)  
10. 190-5083 [1] BOLT-SPECIAL  
11. 193-1310 [2] BEARING GP-SCREED  
12. 197-9840 [1] COVER AS  
13. 197-9842 [1] PLATE  
14. 197-9844 Y [1] CHAIN GP-SCREED  
15. 197-9849 Y [1] SHAFT GP-DRIVE (REAR)  
16. 197-9850 Y [1] SHAFT GP-DRIVE (FRONT)  
17. 5J-3941 [2] PIN-SPRING  
18. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
21. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
22. 6K-3632 [2] LOCKNUT (1-8-THD)  
23. 8T-9384 [4] BOLT (1/2-13X0.875-IN)  
24. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
25. 8I-0740 [1] COUPLING GP  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
26. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
27. 102-2739 [1] KEY-SQUARE  
28. 197-5276 [1] BRACKET AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01220198
 

8I-0734: CROWN GP-MANUAL

8I-0734 CROWN GP-MANUAL
S/N 9AL1-2026; 1PM1-2026
AN ATTACHMENT
i00424264 KEBP0122
8I0734 CROWN GP-MANUAL Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2728 [1] SHAFT AS-ADJUSTMENT  
2. 102-2714 [1] HANDLE  
3. 8T-7566 [2] PIN-SPRING  
4. 8I-0260 [1] WHEEL AS  
5. 135-8177 [1] LOCKOUT  
6. 8T-8908 [1] BOLT (1/4-20X1-IN)  
7. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
8. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#KEBP01220199
 

197-5278: CROWN GP-POWER

197-5278 CROWN GP-POWER
S/N 9AL1-UP; 1PM1-UP
PART OF 244-3155, 244-3156 SCREED AR
Type 1
AN ATTACHMENT
i01478928 KEBP0122
1975278 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3729 Y [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Service Magazine
New Crank Assembly is now Available {5639, 5641, 6640}
2000/05/22

Caterpillar Parts SIS Catalog AP-800C :

CONTROL GP-THICKNESS
165-4719 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4718 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
119-1408 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
115-5741 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
115-5738 CONTROL GP-THICKNESS
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
ADJUSTER GP-STRIKE-OFF
134-8493 ADJUSTER GP-STRIKE-OFF
ADJUSTER GP-STRIKE-OFF
122-0160 ADJUSTER GP-STRIKE-OFF
CONTROL GP-THICKNESS
222-7158 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7160 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0337 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0338 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0339 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0340 CONTROL GP-THICKNESS
CROWN GP
197-5288 CROWN GP
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL

Truck sale:

2000 CAT AP-800C
USD $34,000 
2000 CAT AP-800C

MULTI-INTERNATIONAL SUPPLY
San Juan, Texas
 
USD $12,345 
2019 CAT AP-800C

AZ Test
2001 CAT AP-800C
USD $37,900 
2001 CAT AP-800C

Brown Equipment Co.
Ocala, Florida
1996 CAT AP-800C
Call 
1996 CAT AP-800C

Maquinaria Intertorito S.A. de C.V.
Tlalnepantla, Distrito Federal, Mexico
 
Call 
2001 CAT AP-800C

Badland Truck Sales
Glendive, Montana
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.