223-0581 MOTOR GP-PISTON -DRAG CONVEYOR S/N 9AL1-UP; 1PM1-UP PART OF 234-9143 MOTOR GP-PISTON AP-800C

223-0581: MOTOR GP-PISTON

223-0581 MOTOR GP-PISTON -DRAG CONVEYOR
S/N 9AL1-UP; 1PM1-UP
PART OF 234-9143 MOTOR GP-PISTON

Parts for your AP-800C ASPHALT PAVER:

Pos.	Part No	Qty	Parts name
1.	122-8717	[1]	PIN
2.	122-8968	[1]	PLATE-VALVE
3.	8T-5005 M	[4]	BOLT (M10X1.5X70-MM)
4.	1G-7358	[1]	PLATE-THRUST
5.	2H-5549	[2]	RING-RETAINING
6.	137-5117	[1]	WASHER (36.02X71.76X2.16-MM THK)
7.	231-5215	[1]	KIT-PUMP REPAIR
			(INCLUDES RING RETAINER, WASHERS, SPRING, CYLINDER BLOCK, RETAINERS, PINS, GUIDE & PISTONS)
8.	1J-6474	[2]	RING-RETAINING (EXTERNAL)
9.	8H-9789	[1]	BALL BEARING
10.	7X-5478	[2]	PIN-SPRING
11.	122-8713 J	[1]	GASKET-END CAP
12.	4L-6944	[1]	BEARING AS-NEEDLE
13.	5E-8757	[1]	BRACKET

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	392-5514 J	[1]	KIT-SEAL (PISTON MOTOR)
			(ALSO INCLUDES PARTS MARKED " K " IN THE GRAPHIC)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

223-0583: MOTOR GP-PISTON

MOTOR GP-PISTON

223-0583 MOTOR GP-PISTON -AUGER CONVEYOR
S/N 9AL280-UP; 1PM793-UP
PART OF 228-4132 LINES GP-CONVEYOR, 233-8521 MOTOR GP-PISTON

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-8717	[1]	PIN
2.	122-8968	[1]	PLATE-VALVE
3.	8T-5005 M	[4]	BOLT (M10X1.5X70-MM)
4.	1G-7358	[1]	PLATE-THRUST
5.	2H-5549	[2]	RING-RETAINING
6.	137-5117	[1]	WASHER (36.02X71.76X2.16-MM THK)
8.	1J-6474	[2]	RING-RETAINING (EXTERNAL)
9.	8H-9789	[1]	BALL BEARING
10.	168-5024	[1]	SHAFT
11.	7X-5478	[2]	PIN-SPRING
12.	122-8713 J	[1]	GASKET-END CAP
13.	4L-6944	[1]	BEARING AS-NEEDLE
14.	9S-8008	[2]	PLUG (1-1/16-12-THD)
15.	3D-2824	[2]	SEAL-O-RING
16.	1G-5735	[1]	SPOOL
17.	246-2234	[2]	SPRING-GUIDE
18.	110-6322	[2]	SPRING
19.	110-6321	[2]	PLUG-SPECIAL
20.	3J-1907	[2]	SEAL-O-RING
21.	197-4123	[1]	PLUG
22.	1J-9671	[1]	SEAL-O-RING
23.	197-4130	[1]	SPRING
24.	245-9128	[1]	KIT-REPAIR (VALVE POPPET)
25.	9S-4182	[2]	PLUG (7/16-20-THD)
26.	3J-7354	[2]	SEAL-O-RING
27.	5E-8757	[1]	BRACKET
28.	231-5215	[1]	KIT-PUMP REPAIR
			(INCLUDES RETAINING RING, WASHERS, SPRING, CYLINDER BLOCK, RETAINER, PINS, THRUST WASHERS, GUIDE, SLIPPER RETAINER
			& PISTONS)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	392-5514 J	[1]	KIT-SEAL (DRAG CONVEYOR, AUGER CONVEYOR)
			(INCLUDES LIP SEAL, O-RING SEAL & SERVICES PARTS MARKED H IN GRAPHICS)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

233-8521: MOTOR GP-PISTON

MOTOR GP-PISTON

233-8521 MOTOR GP-PISTON -AUGER CONVEYOR
S/N 9AL1-UP; 1PM1-UP
FIELD INSTALLATION

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	223-0583 Y	[1]	MOTOR GP-PISTON (AUGER CONVEYOR)
2.	224-7265	[1]	SPROCKET (20-TEETH)
3.	148-8358	[1]	ELBOW AS
	6V-8398	[1]	SEAL-O-RING
	2M-9780	[1]	SEAL-O-RING
	6V-8624	[1]	ELBOW
4.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
5.	148-8372	[1]	ELBOW AS
	6V-8398	[1]	SEAL-O-RING
	2M-9780	[1]	SEAL-O-RING
	6V-8721	[1]	ELBOW
	Y		SEPARATE ILLUSTRATION

234-9143: MOTOR GP-PISTON

MOTOR GP-PISTON

234-9143 MOTOR GP-PISTON -AUGER CONVEYOR
S/N 9AL1-UP; 1PM1-UP
FIELD INSTALLATION

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	223-0581 Y	[1]	MOTOR GP-PISTON (AUGER CONVEYOR)
2.	148-8345	[1]	CONNECTOR AS
	6V-8398	[1]	SEAL-O-RING
	2M-9780	[1]	SEAL-O-RING
	6V-8638	[1]	CONNECTOR
3.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

6R-4097: MOTOR GP-PISTON

MOTOR GP-PISTON

6R-4097 MOTOR GP-PISTON -PROPEL
S/N 9AL1-UP
PART OF 106-9692 ASSIST GP-FRONT WHEEL
AN ATTACHMENT

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8607 L	[8]	PISTON (CLASS 0)
			-OR-
	081-3898 L	[8]	PISTON (CLASS 1)
2.	5E-8224 NT	[2]	SEAL-O-RING
3.	5E-8222 L	[1]	KIT-PISTON RETAINER
4.	1G-8615 J	[6]	NUT
5.	5E-8229 S	[1]	VALVE
6.	5E-8230 S	[1]	RING-VALVE
7.	5E-8226 S	[1]	HOUSING-VALVE
8.	5E-8232 S	[1]	SEAL-O-RING
9.	081-3817 S	[12]	SCREW
10.	081-3667 NS	[1]	SEAL-O-RING
11.	9X-6153 SM	[2]	BOLT (M6X1X10-MM)
12.	5E-8227 NS	[1]	WASHER
13.	081-3137 S	[9]	SPRING
14.	5E-8231 S	[1]	PLUG
15.	TZ	[1]	CAM
16.	1G-8611 J	[1]	RING-SNAP
17.	5E-8240 J	[1]	WASHER
18.	5E-8239 J	[1]	SHIM PACK
19.	5E-8238 J	[1]	BEARING
20.	5E-8236 JN	[1]	SEAL
21.	1G-8610 J	[1]	SUPPORT
22.	5E-8237 J	[1]	BEARING
23.	081-3761	[1]	PLATE AS
23A.	8T-2926 M	[5]	BOLT
25.	5E-8279 J	[6]	KIT-STUD
26.	1G-8613 J	[1]	SHAFT
27.	LZ	[1]	CYLINDER BLOCK
28.	1G-8612 JN	[1]	SEAL

			AVAILABLE REPAIR KIT(S):
	1G-8606 L	[1]	ROTATING GP-MOTOR (PROPEL MOTOR)
	1G-8609 J	[1]	SUPPORT GP-MOTOR (PROPEL MOTOR)
	1G-8608 T	[1]	KIT-CAMSHAFT (PROPEL MOTOR)
	5E-8220 N	[1]	KIT-SEAL (PROPEL MOTOR)
	5E-8225 S	[1]	KIT-HOUSING VALVE (PROPEL MOTOR)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	N		KIT MARKED N SERVICES PART(S) MARKED N
	S		KIT MARKED S SERVICES PART(S) MARKED S
	T		KIT MARKED T SERVICES PART(S) MARKED T
	Z		NOT SERVICED SEPARATELY

6R-4097: MOTOR GP-PISTON

MOTOR GP-PISTON

6R-4097 MOTOR GP-PISTON -PROPEL
S/N 9AL1-UP; 1PM1-UP
PART OF 106-9692 ASSIST GP-FRONT WHEEL
AN ATTACHMENT

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8607 L	[8]	PISTON (CLASS 0)
			-OR-
	081-3898 L	[8]	PISTON (CLASS 1)
2.	081-3761	[1]	PLATE AS
2A.	8T-2926 M	[5]	BOLT
3.	5E-8222 L	[1]	KIT-PISTON RETAINER (PROPEL MOTOR)
			(TO BE USED ON MOTORS BELOW S/N 15826 & UP)
			-OR-
	108-0432 CL	[1]	KIT-PISTON RETAINER (PROPEL MOTOR)
			(TO BE USED ON MOTORS WITH S/N 15826 & UP)
4.	1G-8606 L	[1]	ROTATING GP-MOTOR
5.	230-7879 S	[1]	VALVE
6.	5E-8230 S	[1]	RING-VALVE
7.	Z	[1]	HOUSING
8.	5E-8232 S	[1]	SEAL-O-RING
9.	081-3817 S	[12]	SCREW
10.	9X-7358 NS	[1]	SEAL-O-RING
11.	9X-6153 SM	[2]	BOLT (M6X1X10-MM)
12.	5E-8227 NS	[1]	WASHER
13.	081-3137 S	[9]	SPRING
14.	5E-8231 S	[1]	PLUG
15.	TZ	[1]	CAM
16.	1G-8609 Y	[1]	SUPPORT GP-MOTOR
17.	5E-8224 T	[2]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	1G-8608 T	[1]	KIT-CAMSHAFT (PROPEL MOTOR)
	5E-8220 N	[1]	KIT-SEAL (PROPEL MOTOR)
	5E-8225 S	[1]	KIT-HOUSING VALVE (PROPEL MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	L		GROUP MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	N		KIT MARKED N SERVICES PART(S) MARKED N
	S		KIT MARKED S SERVICES PART(S) MARKED S
	T		KIT MARKED T SERVICES PART(S) MARKED T
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

8I-0788: MOTOR GP-PISTON

MOTOR GP-PISTON

8I-0788 MOTOR GP-PISTON -PROPEL
S/N 9AL1-UP; 1PM1-UP
PART OF 108-2154, 143-3501 LINES GP-PROPEL

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8425	[2]	PIN
2.	109-7783	[2]	BEARING
3.	077-8353	[4]	PIN (SPRING)
4.	3J-7354	[7]	SEAL-O-RING
5.	9S-4182	[7]	PLUG (7/16-20-THD)
6.	2M-9780	[3]	SEAL-O-RING
7.	9S-8006	[2]	PLUG (7/8-14-THD)
8.	5E-8726	[1]	KIT-CYLINDER BLOCK (PROPEL MOTOR)
9.	5E-8704	[1]	SPRING
10.	5E-8713	[1]	RETAINER
11.	5E-8778	[1]	RING
12.	5E-8703	[1]	SPRING-SEAT
13.	109-7784	[9]	PISTON
14.	5E-8702	[1]	GUIDE
15.	7R-4227	[2]	GUIDE-BEARING
16.	109-7785	[4]	SPACER
17.	1G-8427	[4]	WASHER
18.	5E-8784 M	[4]	BOLT (M6X1X20-MM)
19.	109-7786	[1]	PLATE-MOTOR VALVE
20.	1G-8428	[1]	ARM-HOLD-DOWN
21.	3J-1907	[8]	SEAL-O-RING
22.	1G-8429	[1]	PIN-HOLD-DOWN
23.	1G-8432	[2]	SETSCREW
24.	3E-9851 M	[2]	NUT-SEALING (M12X1.75-THD)
25.	1G-8433	[2]	PLUG
26.	7M-8485	[2]	SEAL-O-RING
27.	1G-8434	[1]	SPRING
28.	1G-8435	[2]	KIT-SERVO PISTON (PROPEL MOTOR)
29.	1G-8436	[4]	RING-PISTON SEAL
30.	1G-8437	[1]	SPRING
31.	109-7788	[1]	GASKET
32.	5E-8744	[1]	BEARING
33.	9S-4191	[3]	PLUG (9/16-18-THD)
34.	1G-8439	[2]	PIN-SPRING
35.	1G-8440	[2]	BALL
36.	121-2548	[2]	RING
37.	1G-8442	[2]	ORIFICE
38.	8T-4648 M	[4]	BOLT (M12X1.75X70-MM)
39.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
40.	8T-6870 M	[1]	BOLT (M8X1.25X70-MM)
41.	1G-5735	[1]	SPOOL
42.	211-4401	[2]	SEAT
43.	124-7132	[1]	SWASHPLATE
44.	1G-5732	[2]	PLUG
45.	1G-5731	[1]	PLUG
46.	1G-5730	[1]	SPRING
47.	6R-1703	[1]	POPPET
48.	6R-1702	[1]	NUT-SPECIAL (7/8-14-THD)
49.	109-8828	[1]	SHAFT
50.	5E-8763	[1]	BEARING-ROLLER
51.	1J-6474	[1]	RING-RETAINING (EXTERNAL)
52.	6V-5586	[2]	SEAL-O-RING
53.	5E-8789 J	[1]	SEAL-LIP TYPE
54.	5E-8770 J	[1]	SEAL-O-RING
55.	5E-8731	[1]	PLATE
56.	8T-0269 M	[4]	BOLT-SOCKET HEAD (M6X1X20-MM)
57.	109-7790	[1]	GASKET
58.	109-7791	[1]	CONTROL-HYDRAULIC
59.	8T-2223 M	[4]	BOLT-SOCKET HEAD (M10X1.5X45-MM)
60.	8T-1160 M	[4]	BOLT-SOCKET HEAD (M10X1.5X50-MM)
61.	9S-4185	[1]	PLUG (3/4-16-THD)
62.	3K-0360	[1]	SEAL-O-RING
63.	5E-8777	[1]	PLUG
64.	1G-8448	[2]	PLUG-ORIFICE
65.	1G-8446	[1]	SCREW-FILTER
66.	030-6120	[4]	RING

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	156-9684 J	[1]	KIT-SHAFT SEAL (PROPEL MOTOR)
			(INCLUDES LIP SEAL, CARRIER SEAL & O-RING SEAL)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

8I-0843: MOTOR GP-PISTON

MOTOR GP-PISTON

8I-0843 MOTOR GP-PISTON -DRAG CONVEYOR, AUGER CONVEYOR
S/N 9AL1-279; 1PM1-792
PART OF 108-2155 LINES GP-CONVEYOR

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-0947	[4]	BOLT (1/2-13X2.25-IN)
2.	9S-4185	[2]	PLUG (3/4-16-THD)
3.	3K-0360	[2]	SEAL-O-RING
4.	1J-6474	[2]	RING-RETAINING (EXTERNAL)
5.	7R-3403	[1]	GASKET
6.	7X-5468	[1]	BEARING AS-NEEDLE
7.	7X-5489	[1]	PIN
8.	7X-5513	[1]	PLATE
9.	8H-9789	[1]	BALL BEARING
10.	7X-5469	[1]	RING-RETAINING
11.	7X-5470	[1]	WASHER-SPECIAL
12.	7X-5471	[1]	SPRING
13.	7X-5472	[1]	WASHER (31.2X40.3X2.7-MM THK)
14.	2H-5549	[2]	RING-RETAINING
15.	7X-5474	[3]	PIN
16.	7X-5473	[1]	RETAINER
17.	7X-5477	[1]	GUIDE-RETAINER
18.	1G-5975	[1]	GUIDE
19.	1G-5974	[7]	PISTON
20.	6R-2031	[1]	SHAFT
21.	7R-3404	[1]	PLATE
22.	7X-5433	[1]	SEAL-LIP TYPE

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

240-7317: PUMP & MTG GP-SCREED VIBRATORY

PUMP & MTG GP-SCREED VIBRATORY

240-7317 PUMP & MTG GP-SCREED VIBRATORY
S/N 9AL1-279; 1PM1-798

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-8344	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	6V-9162	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
2.	148-8373	[1]	ELBOW AS
	6V-8400	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	8C-3364	[1]	ELBOW
3.	148-8322	[1]	CONNECTOR AS
	2M-9780	[1]	SEAL-O-RING
	6V-8640	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
4.	226-2451 Y	[1]	PUMP GP-GEAR (SCREED)
	Y		SEPARATE ILLUSTRATION

104-4199: PUMP GP-GEAR

PUMP GP-GEAR

104-4199 PUMP GP-GEAR
S/N 9AL1-279; 1PM1-798
VIBRATORY
PART OF 108-2156 LINES GP-AUXILIARY HYDRAULIC

Parts for your AP-800C ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	153-3018	[1]	KIT-SOLENOID

			AVAILABLE REPAIR KIT(S):
	118-2864	[1]	KIT-VALVE SEAL
			(INCLUDES CORE PLUG & O-RING SEALS)
	135-2093	[1]	KIT-PUMP SEAL

Information:

HYDRAULIC SYSTEM

MOTOR GP

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR FOR INSTALLING A NEW PAVER VENTILATION MOTOR ON CERTAIN AP-650B, AP-800C, AP-900B, AP-1000B, AP-1050B, AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-225C, BG-230, BG-240B, BG-240C, BG-245C, BG-260C, AND BG-2
PRODUCT SUPPORT PROGRAM FOR FOR INSTALLING A NEW PAVER VENTILATION MOTOR ON CERTAIN AP-650B, AP-800C, AP-900B, AP-1000B, AP-1050B, AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-225C, BG-230, BG-240B, BG-240C, BG-245C, BG-260C, AND BG-2

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Fumes Dispersal Motor Shut Off At Factory
Fumes Dispersal Motor Shut Off At Factory

Specifications

Conveyor Drive Motors
AP-800C ASPHALT PAVER CONVEYOR SYSTEM

Forward Assist Motor
AP-800C ASPHALT PAVER AUXILIARY SYSTEMS

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR FOR INSTALLING A NEW PAVER VENTILATION MOTOR ON CERTAIN AP-650B, AP-800C, AP-900B, AP-1000B, AP-1050B, AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-225C, BG-230, BG-240B, BG-240C, BG-245C, BG-260C, AND BG-2
PRODUCT SUPPORT PROGRAM FOR FOR INSTALLING A NEW PAVER VENTILATION MOTOR ON CERTAIN AP-650B, AP-800C, AP-900B, AP-1000B, AP-1050B, AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-225C, BG-230, BG-240B, BG-240C, BG-245C, BG-260C, AND BG-2

Service Letter-Asia

Systems Operation

Systems Operation
AP-800C ASPHALT PAVER GROUND DRIVE SYSTEM

Reuse And Salvage Guidelines

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR FOR INSTALLING A NEW PAVER VENTILATION MOTOR ON CERTAIN AP-650B, AP-800C, AP-900B, AP-1000B, AP-1050B, AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-225C, BG-230, BG-240B, BG-240C, BG-245C, BG-260C, AND BG-2
PRODUCT SUPPORT PROGRAM FOR FOR INSTALLING A NEW PAVER VENTILATION MOTOR ON CERTAIN AP-650B, AP-800C, AP-900B, AP-1000B, AP-1050B, AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-225C, BG-230, BG-240B, BG-240C, BG-245C, BG-260C, AND BG-2

Bench Test Procedures

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Disassembly and Assembly

Propel Motor And Planetary
AP-800C ASPHALT PAVER MACHINE SYSTEMS

Drag Conveyor Drive Motor
AP-800C ASPHALT PAVER MACHINE SYSTEMS

Screw Auger Motor
AP-800C ASPHALT PAVER MACHINE SYSTEMS

Front Wheel Assist Motor
AP-800C ASPHALT PAVER MACHINE SYSTEMS

Service Magazine

New Auger Motors and Feeder Motors are Now Used {5058}
2003/10/06

Caterpillar Parts SIS Catalog AP-800C :

Truck sale:

USD $34,000

2000 CAT AP-800C

MULTI-INTERNATIONAL SUPPLY
San Juan, Texas

USD $12,345

2019 CAT AP-800C

AZ Test

USD $37,900

2001 CAT AP-800C

Brown Equipment Co.
Ocala, Florida

Call

1996 CAT AP-800C

Maquinaria Intertorito S.A. de C.V.
Tlalnepantla, Distrito Federal, Mexico

Call

2001 CAT AP-800C

Badland Truck Sales
Glendive, Montana