AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-3473 SCREED AR 8-16B ASPHALT SCREED


MACHINE ARRANGEMENT
SCREED AR
FUEL SYSTEM
FUEL GP-SCREED
LINES GP-FUEL
CONTROLS
ADJUSTER GP

ASPHALT SCREED 8-16B ASPHALT SCREED 2JN
 8-16B EXTEND-A-MAT Screed 2JN00001-UP KEBP0124 8-16B 2JN   (1993)

MACHINE ARRANGEMENT

SCREED AR
112-3473 SCREED AR
 

#KEBP01240001
 

112-3473: SCREED AR

112-3473 SCREED AR
i00967296 KEBP0124
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8I-0257 Y [1] ADJUSTER GP-HEIGHT  
  8I-0341 Y [1] ARM GP-DROP  
    -OR-
  119-7093 Y [1] ARM GP-DROP  
  112-3464 Y [1] BURNER GP (DIESEL HEAT)  
  8I-0584 Y [1] CROWN GP  
    -OR-
  120-5898 Y [1] CROWN GP-MANUAL  
  8I-0291 Y [1] DEFLECTOR GP  
  8I-0470 Y [1] FINISH GP  
  8I-0001 Y [1] FRAME GP-SCREED (8-FT TO 16-FT HYD EXT)  
    -OR-
  120-5906 Y [1] FRAME GP-SCREED (8-FT)  
  8I-0473 Y [1] GATE GP-END  
    -OR-
  120-4568 Y [1] GATE GP-END  
    -OR-
  145-9437 Y [1] GATE GP-END  
    -OR-
  145-9438 Y [1] GATE GP-END  
  103-0757 Y [1] LINES GP-BURNER (DIESEL HEAT)  
  112-3468 Y [1] LINES GP-EXTENSION  
  112-3466 Y [1] LINES GP-VIBRATORY  
  8I-0176 Y [1] PLATE GP-SCREED (DIESEL HEAT)  
  118-4338 Y [1] PLATFORM GP  
  8I-0213 Y [1] SLOPER GP-MANUAL  
  8I-0142 Y [1] VIBRATORY GP  
  111-9077 Y [1] WIRING GP-SCREED  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01240002
 

112-3464: BURNER GP

112-3464 BURNER GP -DIESEL HEAT
S/N 2JN1-2088
PART OF 112-3473 SCREED AR
Type 1
i00489449 KEBP0124
1123464 BURNER GP Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0157 [4] CHAMBER AS-UPPER BURNER  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8I-0155 [4] CHAMBER AS (LOWER)  
5. 8T-8013 [4] GLOW PLUG (12-VOLT)  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 030-9612 [12] SCREW-FORMING (10-24X0.5-IN)  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 109-0334 [4] MOTOR GP-BURNER BLOWER (24-VOLT)  
    (EACH INCLUDES)
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 E SLEEVE (64-CM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 102-2697 [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 045-4065 [16] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 [16] LOCKWASHER  
20. 102-2736 [4] SCREEN-INLET  
21. 8J-1256 [4] CLIP  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 102-2706 [4] RING-FLAME  
24. 102-2688 [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK (FUEL FLOW)  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  E   ORDER BY THE CENTIMETER
 

#KEBP01240003
 

112-3464: BURNER GP

112-3464 BURNER GP -DIESEL HEAT
S/N 2JN1-2088
PART OF 112-3473 SCREED AR
Type 2
i00606141 KEBP0124
1123464 BURNER GP Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-9269 C [4] CHAMBER AS-UPPER  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8I-0155 [4] CHAMBER AS (LOWER)  
5. 141-9272 C [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 030-9612 C [20] SCREW-FORMING (10-24X0.5-IN)  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 109-0334 [4] MOTOR GP-BURNER BLOWER (24-VOLT)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 E SLEEVE (64-CM)  
16. 102-2697 [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 045-4065 [16] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 C [24] LOCKWASHER  
20. 102-2736 [4] SCREEN-INLET  
21. 8J-1256 [4] CLIP  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 102-2706 [4] RING-FLAME  
24. 102-2688 [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK (FUEL FLOW)  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#KEBP01240004
 

112-3464: BURNER GP

112-3464 BURNER GP -DIESEL HEAT
S/N 2JN2089-2102
PART OF 112-3473 SCREED AR
i01370037 KEBP0124
1123464 BURNER GP Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-5091 C [4] CHAMBER AS (UPPER)  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8I-0155 [4] CHAMBER AS (LOWER)  
5. 141-9272 [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 030-9612 [20] SCREW-FORMING (10-24X0.5-IN)  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 109-0334 [4] MOTOR GP-BURNER BLOWER (24-VOLT)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 E SLEEVE (64-CM)  
16. 102-2697 [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 045-4065 [16] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 [24] LOCKWASHER  
20. 187-9760 C [4] PLATE  
21. 8J-1256 [4] CLIP  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 191-5983 C [4] CONE AS  
    (EACH INCLUDES)
  9X-6259 [1] SCREW-MACHINE (6-32X0.375-IN)  
  [1] LOCKNUT  
24. 187-9608 C [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK (FUEL FLOW)  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
30. 191-1036 C [4] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#KEBP01240005
 

112-3464: BURNER GP

112-3464 BURNER GP -DIESEL HEAT
S/N 2JN2103-UP
PART OF 112-3473 SCREED AR
i01742977 KEBP0124
1123464 BURNER GP Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-5091 C [4] CHAMBER AS (UPPER)  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8I-0155 [4] CHAMBER AS (LOWER)  
5. 141-9272 [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 030-9612 [20] SCREW-FORMING (10-24X0.5-IN)  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 206-6749 C [4] MOTOR GP-ELECTRIC (24-VOLT)(BLOWER)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 206-6728 C [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 6V-5764 C [16] SCREW-MACHINE (10-32X0.625-IN)  
19. 9F-8125 [24] LOCKWASHER  
20. 187-9760 [4] PLATE  
21. 8J-1256 [4] CLIP  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 191-5983 [4] CONE AS  
    (EACH INCLUDES)
  9X-6259 [1] SCREW-MACHINE (6-32X0.375-IN)  
  [1] LOCKNUT  
24. 187-9608 [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK (FUEL FLOW)  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
30. 191-1036 [4] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01240006
 

103-0757: LINES GP-BURNER

103-0757 LINES GP-BURNER -DIESEL HEAT
PART OF 112-3473 SCREED AR
Type 1
i00468341 KEBP0124
1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
2. 5R-6301 [1] PLUG-DUST  
3. 3K-0360 [3] SEAL-O-RING  
4. 6V-8634 [1] CONNECTOR  
5. 6V-8397 [21] SEAL-O-RING  
6. 116-8208 I [1] HOSE AS  
7. 7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0709 I [2] HOSE AS  
10. 8I-0710 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 5P-6944 [2] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 129-3078 [4] VALVE AS-SHUTOFF (BURNER)  
23. 8C-6868 [6] CONNECTOR  
24. 2T-2305 [2] ELBOW  
25. 6V-9850 [2] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
28. 3S-2093 [3] STRAP-CABLE  
29. 6V-8994 [1] UNION (STRAIGHT)  
30. 6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0712 I [1] HOSE AS  
33. 8I-0713 I [1] HOSE AS  
34. 003-8747 [2] ELBOW  
35. 8C-8988 [1] ELBOW  
36. 8M-2773 [5] CLIP (LOOP)  
37. 4M-6425 [1] BOLT (5/16-18X1-IN)  
38. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 [3] NUT (5/16-18-THD)  
40. 160-2244 G SLEEVE-ABRASION (17.5-IN EACH)  
40A. 160-2244 G SLEEVE-ABRASION (21-IN EACH)  
40B. 160-2244 G SLEEVE-ABRASION (24-IN)  
40C. 160-2244 G SLEEVE-ABRASION (12-IN)  
41. 077-8184 [8] CLAMP  
42. 6V-8918 [1] BOLT (5/16-18X1.25-IN)  
43. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
44. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01240007
 

103-0757: LINES GP-BURNER

103-0757 LINES GP-BURNER -DIESEL HEAT
PART OF 112-3473 SCREED AR
Type 2
i02451428 KEBP0124
1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
2. 5R-6301 [1] PLUG-DUST  
4. 148-8318 C [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
6. 116-8208 I [1] HOSE AS  
7. 153-6246 C [1] TEE AS  
  6V-8397 [3] SEAL-O-RING  
  7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0709 I [2] HOSE AS  
10. 8I-0710 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 148-8313 C [2] ADAPTER AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  5P-6944 [1] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 129-3078 [4] VALVE AS-SHUTOFF (BURNER)  
23. 164-5597 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8C-6868 [1] CONNECTOR  
24. 199-6290 C [2] ELBOW AS  
    (EACH INCLUDES)
  2T-2305 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
25. 148-8367 C [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
29. 149-5452 C [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 148-8377 C [1] ELBOW AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0712 I [1] HOSE AS  
33. 145-0292 CI [1] HOSE AS  
34. 003-8747 [2] ELBOW  
36. 8M-2773 C [7] CLIP (LOOP)  
37. 4M-6425 [1] BOLT (5/16-18X1-IN)  
38. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 C [2] NUT (5/16-18-THD)  
40. 160-2244 G SLEEVE-ABRASION (17.5-IN EACH)  
40A. 160-2244 G SLEEVE-ABRASION (21-IN EACH)  
40B. 160-2244 G SLEEVE-ABRASION (24-IN)  
40C. 160-2244 G SLEEVE-ABRASION (12-IN)  
42. 8T-4182 CM [2] BOLT (M10X1.5X45-MM)  
43. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
45. 148-8371 C [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
47. 077-8184 [8] CLAMP  
48. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
49. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP01240008
 

103-0757: LINES GP-BURNER

103-0757 LINES GP-BURNER -DIESEL HEAT
PART OF 112-3473 SCREED AR
Type 3
i02441569 KEBP0124
1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
2. 5R-6301 [1] PLUG-DUST  
4. 148-8318 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
6. 116-8208 I [1] HOSE AS  
7. 153-6246 [1] TEE AS  
  6V-8397 [3] SEAL-O-RING  
  7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0709 I [2] HOSE AS  
10. 8I-0710 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 148-8313 [2] ADAPTER AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  5P-6944 [1] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 129-3078 [4] VALVE AS-SHUTOFF (BURNER)  
23. 164-5597 [6] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8C-6868 [1] CONNECTOR  
24. 199-6290 [2] ELBOW AS  
    (EACH INCLUDES)
  2T-2305 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
25. 148-8367 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
29. 149-5452 [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 148-8377 [1] ELBOW AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0712 I [1] HOSE AS  
33. 145-0292 I [1] HOSE AS  
34. 003-8747 [2] ELBOW  
36. 8M-2773 [7] CLIP (LOOP)  
37. 4M-6425 [1] BOLT (5/16-18X1-IN)  
38. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 [2] NUT (5/16-18-THD)  
40. 160-2244 G SLEEVE-ABRASION (21-IN EACH)  
40A. 160-2244 G SLEEVE-ABRASION (17-IN EACH)  
40B. 160-2244 G SLEEVE-ABRASION (26-IN)  
40C. 160-2244 G SLEEVE-ABRASION (12-IN)  
42. 6V-7357 CM [2] BOLT (M6X1X25-MM)  
43. 8T-4205 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 148-8371 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
47. 077-8184 [8] CLAMP  
48. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
49. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP01240009
 

102-2703: ADJUSTER GP-HEIGHT

102-2703 ADJUSTER GP-HEIGHT -MANUAL
PART OF 8I-0257 ADJUSTER GP-HEIGHT
i00465645 KEBP0124
1022703 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 163-5736 [1] SCREW-LIFTING  
3. 107-0247 [1] GEAR-WORM  
4. 3P-8680 [2] CUP-BEARING  
5. 187-5527 [1] HOUSING  
6. 107-0250 [1] GUIDE-BUSHING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 163-5737 [1] PIPE  
9. 2D-6398 [2] RING-RETAINING  
10. 8L-4070 [2] BALL BEARING  
11. 7T-9831 [2] CONE-BEARING  
12. 112-2181 [1] WORM  
13. 142-6282 [1] CAP  
   
  8T-5069 F [4] SETSCREW-SOCKET (10-24X0.25-IN)  
  F   NOT SHOWN
 

Information:

Disassembly and Assembly
Screed
8-16B, 10-20B, & 10-20WB EXTEND-A-MAT SCREED
Extender Screed Plate
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Screed
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Screed Plate (Main Screed Assembly)
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Nose Bars (Main Screed Assembly)
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Service Magazine
New Valve Improves Screed Vibrator Performance{5653}
1996/10/21
Improved Screed Hoses {7554,5057}
1998/04/13
Addition Of Screed Deflectors {6643}
1998/09/07
Installation Replacement For Screed Extender Support Bushings {6641}
1998/10/05
Installation Replacement For Screed Extender Support Bushings {6641}
1999/01/25
New Actuator Motors Available for Power Screed Options {6640}
1999/02/15
New Screed Plates Are Now Available {6641}
1999/04/19
A New Procedure for Securing the Lines on the Extender is Now Available for the Asphalt Screeds {1408, 6642}
2006/02/20

Caterpillar Parts SIS Catalog 8-16B :

BURNER GP
112-3464 BURNER GP
BURNER GP
112-3464 BURNER GP
BURNER GP
112-3464 BURNER GP
BURNER GP
112-3464 BURNER GP
LINES GP-BURNER
103-0757 LINES GP-BURNER
LINES GP-BURNER
103-0757 LINES GP-BURNER
LINES GP-BURNER
103-0757 LINES GP-BURNER
ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT

Truck sale:

 
$35,000 USD 
CATERPILLAR 816B 1992
- COMPACTORS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
1989 CAT 816B
Call 
1989 CAT 816B

ima noleggi
 
 
CAT 816B

RD Williams Parts
1987 CAT 816B
USD $40,023 
1987 CAT 816B

ima noleggi
1985 CAT 816B
USD $67,213 
1985 CAT 816B

EMSCO
Regina, Saskatchewan, Canada S4R 8R6
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.