AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

165-3728 MOTOR GP-POWER ADJUSTER 24-VOLT PART OF 112-3470 SLOPER GP-POWER Type 1 AN ATTACHMENT 8-16B


CONTROLS
MOTOR GP-POWER ADJUSTER
SLOPER GP
ELECTRICAL SYSTEM
BOX GP

ASPHALT SCREED 8-16B ASPHALT SCREED 2JN
 8-16B EXTEND-A-MAT Screed 2JN00001-UP KEBP0124 8-16B 2JN   (1993)

CONTROLS

MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
109-0336 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
109-7038 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
 

#KEBP01240030
 

165-3728: MOTOR GP-POWER ADJUSTER

165-3728 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3470 SLOPER GP-POWER
Type 1
AN ATTACHMENT
i01159590 KEBP0124
1653728 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6592 [1] MOTOR AS  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 171-3715 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 123-3683 [2] BUSHING-BRONZE  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 107-2074 [1] LIMITER-TORQUE  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 9X-1813 E SLEEVE (23-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01240031
 

165-3728: MOTOR GP-POWER ADJUSTER

165-3728 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3470 SLOPER GP-POWER
Type 2
AN ATTACHMENT
i02198448 KEBP0124
1653728 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 171-3715 [1] SHAFT-IDLER  
8. 1L-0834 B [1] BEARING AS-NEEDLE (1/2IN SHAFT)  
9. 123-3683 [1] BUSHING-BRONZE  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7899 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 [1] RACE-THRUST BEARING  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01240032
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
Type 1
AN ATTACHMENT
i01159640 KEBP0124
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6592 [1] MOTOR AS  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 171-3714 [1] LIMITER-TORQUE  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 9X-1813 E SLEEVE (23-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01240033
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
Type 2
AN ATTACHMENT
i02198331 KEBP0124
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7897 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 B [1] RACE-THRUST BEARING (1/2IN SHAFT)  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01240034
 

277-2006: MOTOR GP-POWER ADJUSTER

277-2006 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
AN ATTACHMENT
i02453264 KEBP0124
2772006 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 272-7281 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, TORQUE LIMITER, HOUSING COVER & REAR HOUSING)
20. 311-8715 J [1] WASHER (5X11X1-MM THK)  
21. 311-8716 J [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 J [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 J [1] BUSHING-BRONZE  
24. 6L-4082 J [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP01240035
 

8I-0213: SLOPER GP-MANUAL

8I-0213 SLOPER GP-MANUAL
PART OF 112-3473 SCREED AR
i00423713 KEBP0124
8I0213 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-4974 [1] FRAME AS (RH)  
  246-4975 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
1A. 246-5104 [4] BUSHING  
2. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
3. 106-6322 [1] SUPPORT AS (LH)  
4. 8I-0218 [2] PIN AS-PIVOT  
5. 065-7893 [2] LOCKWASHER-BEARING  
6. 2H-3778 [4] LOCKNUT  
7. 8I-0217 [2] PIN AS-ACTUATOR  
8. 102-2700 [2] ROD END  
9. 102-2699 Y [2] JACK GP-SLOPER  
10. 8I-0219 [2] SUPPORT AS  
11. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
12. 8I-0248 [2] SCALE-SLOPER  
13. 8I-0234 [2] POINTER  
14. 8I-0222 [1] CARRIER AS (RH)  
15. 8I-0250 [1] CHANNEL  
16. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
17. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
18. 4L-6454 [9] BOLT (3/8-16X1-IN)  
19. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
20. 8T-4896 [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 6V-8801 [8] NUT (3/8-16-THD)  
22. 253-9037 [4] BOLT (3/4-16X1.75-IN)  
23. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
24. 7X-0445 [2] BOLT (1-1/4-7X5-IN)  
25. 7X-0633 [4] WASHER (34X64.5X4-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01240036
 

8I-0730: SLOPER GP-MANUAL

8I-0730 SLOPER GP-MANUAL
AN ATTACHMENT
i00424243 KEBP0124
8I0730 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0220 [2] SUPPORT AS  
2. 135-8177 [2] LOCKOUT  
3. 8T-8908 [6] BOLT (1/4-20X1-IN)  
4. 8I-0260 [2] WHEEL AS  
5. 102-2714 [2] HANDLE  
6. 8T-7566 [2] PIN-SPRING  
7. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 5S-7349 [2] BOLT (1/4-20X0.5-IN)  
9. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01240037
 

112-3470: SLOPER GP-POWER

112-3470 SLOPER GP-POWER
Type 1
AN ATTACHMENT
i00489497 KEBP0124
1123470 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-7038 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0742 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER SLOPE)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 114-2384 [2] WIRE AS  
10. 105-6610 [4] WIRE AS  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP01240038
 

112-3470: SLOPER GP-POWER

112-3470 SLOPER GP-POWER
Type 2
AN ATTACHMENT
i01091552 KEBP0124
1123470 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3728 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0742 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER SLOPE)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 114-2384 [2] WIRE AS  
10. 105-6610 [4] WIRE AS  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP01240039
 

107-0411: BOX GP-EXTENSION

107-0411 BOX GP-EXTENSION
PART OF 111-9077 WIRING GP-SCREED
i00493200 KEBP0124
1070411 BOX GP-EXTENSION Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-6854 [1] BOX-EXTENSION  
2. 105-8629 [1] PLATE  
3. 6B-4540 [4] NUT (4-40-THD)  
4. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER WIDTH)  
4A. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
4B. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
4C. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
5. 8C-9812 [1] SWITCH AS-TOGGLE (FEEDER AUTO/MAN)  
5A. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
5B. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
5C. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
6. 092-4917 [4] WASHER (3.2X14X0.5-MM THK)  
7. 6V-2480 [4] SCREW (4-40X0.5-IN)  
8. 106-3448 [1] HARNESS AS-SCREED (EXTENDER)  
 

Information:

Disassembly and Assembly
Sloper & Height Group Motors
8-16B, 10-20B, & 10-20WB EXTEND-A-MAT SCREED
Service Magazine
A New Power Adjuster Motor is Now Used on the Asphalt Screeds {5639}
2005/12/26
A Epoxy Repair Procedure for the Bushings on the Screed is Now Available for Asphalt Pavers and Asphalt Screeds {5639}
2007/09/24

Caterpillar Parts SIS Catalog 8-16B :

MOTOR GP-POWER ADJUSTER
109-7038 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
109-0336 MOTOR GP-POWER ADJUSTER
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP-MANUAL
120-5898 CROWN GP-MANUAL
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
SLOPER GP-MANUAL
8I-0213 SLOPER GP-MANUAL
SLOPER GP-MANUAL
8I-0730 SLOPER GP-MANUAL
SLOPER GP-POWER
112-3470 SLOPER GP-POWER
SLOPER GP-POWER
112-3470 SLOPER GP-POWER

Truck sale:

 
$35,000 USD 
CATERPILLAR 816B 1992
- COMPACTORS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
1989 CAT 816B
Call 
1989 CAT 816B

ima noleggi
 
 
CAT 816B

RD Williams Parts
1987 CAT 816B
USD $40,023 
1987 CAT 816B

ima noleggi
1985 CAT 816B
USD $67,213 
1985 CAT 816B

EMSCO
Regina, Saskatchewan, Canada S4R 8R6
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.