AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

100-6179 GOVERNOR GP-UNIT INJECTOR S/N 98Z8573-UP PART OF 4P-5512 GOVERNOR GP-UNIT INJECTOR CS-531C VIBRATORY COMPACTOR


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL
LINES GP-GOVERNOR OIL
PUMP GP-FUEL INJECTION

VIBRATORY COMPACTOR CS-531C VIBRATORY COMPACTOR 5ZN
 CS-531C Vibratory Compactor 5ZN00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0132 CS-531C 5ZN   (1995)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
7E-7661 GOVERNOR GP-UNIT INJECTOR
 

#KEBP01320110
 

100-6179: GOVERNOR GP-UNIT INJECTOR

100-6179 GOVERNOR GP-UNIT INJECTOR
S/N 98Z8573-UP
PART OF 4P-5512 GOVERNOR GP-UNIT INJECTOR
i00195192 KEBP0132
1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 C [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER-SHAFT  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE CAM  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT (5/16-18-THD)  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT-LEVER  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [2] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 C [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. Z [1] PLUG  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP01320111
 

131-4852: GOVERNOR GP-UNIT INJECTOR

131-4852 GOVERNOR GP-UNIT INJECTOR
S/N 98Z8573-UP
PART OF 4P-5512 GOVERNOR GP-UNIT INJECTOR
i00195239 KEBP0132
1314852 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT (5/16-18-THD)  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 4P-4000 [1] SPRING-LEVER  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [2] NUT (M5X0.8-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP01320112
 

4P-5512: GOVERNOR GP-UNIT INJECTOR

4P-5512 GOVERNOR GP-UNIT INJECTOR
S/N 98Z8573-UP
PART OF 7E-7661 GOVERNOR GP-UNIT INJECTOR
Type 1
i00384144 KEBP0132
4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6179 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01320113
 

4P-5512: GOVERNOR GP-UNIT INJECTOR

4P-5512 GOVERNOR GP-UNIT INJECTOR
S/N 98Z8573-UP
PART OF 7E-7661 GOVERNOR GP-UNIT INJECTOR
Type 2
i00384146 KEBP0132
4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-4852 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01320114
 

7E-7661: GOVERNOR GP-UNIT INJECTOR

7E-7661 GOVERNOR GP-UNIT INJECTOR
S/N 98Z8573-UP
PART OF 111-7717 ENGINE AR
i00387876 KEBP0132
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  4P-5512 Y [1] GOVERNOR GP-UNIT INJECTOR  
    S/N 98Z8573-UP
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01320115
 

129-3567: LINES GP-FUEL

129-3567 LINES GP-FUEL
S/N 5ZN1-171
PART OF 119-5036 INSTALLATION AR-ENGINE
i00494856 KEBP0132
1293567 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2773 [8] CLIP (LOOP)  
2. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
3. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
4. 110-1968 I [1] HOSE AS  
5. 137-4065 I [1] HOSE AS  
6. 137-4066 I [1] HOSE AS  
7. 3J-1907 [2] SEAL-O-RING  
8. 6V-8636 [2] CONNECTOR  
9. 6V-8397 [6] SEAL-O-RING  
10. 3K-0360 [1] SEAL-O-RING  
11. 6V-8723 [1] ELBOW  
12. 2M-9780 [1] SEAL-O-RING  
13. 9X-2134 [1] ELBOW  
14. 103-7268 [2] ADAPTER  
15. 5B-1309 [1] COUPLING-PIPE  
16. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 4L-6454 [1] BOLT (3/8-16X1-IN)  
18. 4D-7388 [1] CLIP  
19. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
20. 5C-7261 M [1] NUT (M8X1.25-THD)  
21. 6W-2463 [2] CLAMP  
22. 3V-0046 [1] PLATE  
23. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
24. 5E-9622 [2] SPACER (9.08X15.88X22-MM THK)  
25. 8T-3647 M [1] BOLT (M8X1.25X80-MM)  
26. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP01320116
 

140-1693: LINES GP-FUEL

140-1693 LINES GP-FUEL
S/N 5ZN172-UP
PART OF 140-1818 INSTALLATION AR-ENGINE
i00641432 KEBP0132
1401693 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-4066 I [1] HOSE AS  
2. 140-1701 I [1] HOSE AS  
3. 110-5288 I [1] HOSE AS  
4. 127-6449 Y [1] PUMP GP-FUEL PRM & WATER SEP  
5. 9S-8003 [2] PLUG (1/2-20-THD)  
6. 1J-9671 [4] SEAL-O-RING  
7. 8T-5043 [2] ADAPTER  
8. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 3P-0011 [2] SPACER (0.44X0.75X0.36-IN THK)  
11. 6V-8397 [6] SEAL-O-RING  
12. 103-7268 [1] ADAPTER  
13. 5B-1309 [1] COUPLING-PIPE  
14. 6V-8724 [1] ELBOW  
15. 3J-1907 [2] SEAL-O-RING  
16. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 4L-6454 [1] BOLT (3/8-16X1-IN)  
18. 6R-3341 [4] CLAMP  
19. 3V-0046 [2] PLATE  
20. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
21. 8M-2773 [5] CLIP (LOOP)  
22. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
23. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 003-9014 [1] ELBOW  
26. 6V-8636 [1] CONNECTOR  
27. 8C-6869 [1] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01320117
 

6I-2420: LINES GP-FUEL FILTER

6I-2420 LINES GP-FUEL FILTER
S/N 98Z8573-23026
PART OF 111-7717 ENGINE AR
FOR USE WITH 6I-2693 FILTER GP-FUEL
CANNOT BE USED WITH 7E-0589 FILTER & LINES GP-FUEL
i00122200 KEBP0132
6I2420 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [8] SEAL-O-RING  
6. 7W-0183 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [5] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
11. 115-4233 [1] TUBE AS  
12. 5F-7054 [1] SEAL-O-RING  
13. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
14. 7E-5190 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 8T-0151 [1] ADAPTER  
17. 7X-2459 [1] ADAPTER-TEE  
18. 3N-3252 [1] SPRING  
19. 5P-7813 [1] SEAL-O-RING  
20. 5P-1046 [1] CONNECTOR  
21. 5P-4961 [2] CLAMP-HOSE  
22. 5P-1442 E HOSE (78-CM)  
23. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
24. 6V-8774 [1] TEE  
25. 8T-0788 [1] ELBOW  
26. 115-4184 [1] TEE-O-RING PORT  
27. 4K-8864 [1] CLIP  
28. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
29. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
30. 8L-5449 [1] SPACER (0.375X0.75X0.69-IN THK)  
31. 068-9526 [1] CAP-TUBE  
32. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
33. 5C-7261 M [1] NUT (M8X1.25-THD)  
34. 3S-2093 [1] STRAP-CABLE  
35. 119-2955 [1] CLIP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01320118
 

7W-8434: LINES GP-GOVERNOR OIL

7W-8434 LINES GP-GOVERNOR OIL
S/N 98Z8573-UP
PART OF 7E-7661 GOVERNOR GP-UNIT INJECTOR
i00122415 KEBP0132
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 7W-0367 [1] TUBE AS  
3. 6V-8647 [1] CONNECTOR  
4. 3J-7354 [2] SEAL-O-RING  
5. 4J-5477 [2] SEAL-O-RING  
 

#KEBP01320119
 

107-7732: PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 98Z8573-18130
PART OF 111-7717 ENGINE AR
i00123073 KEBP0132
1077732 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 107-7733 [1] INJECTOR GP-FUEL  
2A. 114-8718 [1] SEAL-O-RING  
2B. 125-8274 [1] SEAL-O-RING  
  M   METRIC PART
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog CS-531C :

FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
FILTER & LINES GP-FUEL
140-9008 FILTER & LINES GP-FUEL
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
183-4680 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
7E-7661 GOVERNOR GP-UNIT INJECTOR
LINES GP-FUEL
129-3567 LINES GP-FUEL
LINES GP-FUEL
140-1693 LINES GP-FUEL
LINES GP-FUEL FILTER
6I-2420 LINES GP-FUEL FILTER
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL

Truck sale:

1999 CAT CS-531C
USD $32,000 
1999 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
1996 CAT CS-531C
USD $27,000 
1996 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
1997 CAT CS-531C
USD $25,000 
1997 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
1999 CAT CS-531C
USD $29,000 
1999 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.