118-3462 WIRING GP-PLATFORM S/N 5ZN1-161 PART OF 116-2629 OPERATOR AR CS-531C VIBRATORY COMPACTOR

118-3462: WIRING GP-PLATFORM

118-3462 WIRING GP-PLATFORM
S/N 5ZN1-161
PART OF 116-2629 OPERATOR AR

Parts for your CS-531C VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(ENGINE OIL PRESSURE)
1A.	3E-5239	[1]	RELAY AS (24-VOLT)(COOLANT TEMPERATURE)
1B.	3E-5239	[1]	RELAY AS (24-VOLT)(WARNING LIGHT)
1C.	3E-5239	[1]	RELAY AS (24-VOLT)(HYDRAULIC OIL TEMP)
1D.	3E-5239	[1]	RELAY AS (24-VOLT)(FUNCTIONAL LIGHT)
1E.	3E-5239	[1]	RELAY AS (24-VOLT)(BRAKE ONE)
1F.	3E-5239	[1]	RELAY AS (24-VOLT)(BRAKE TWO)
1G.	3E-5239	[1]	RELAY AS (24-VOLT)(NEUTRAL START ONE)
1H.	3E-5239	[1]	RELAY AS (24-VOLT)(NEUTRAL START TWO)
1I.	3E-5239	[1]	RELAY AS (24-VOLT)(LOW CHARGE)
2.	163-1201	[2]	HORN AS (24-VOLT, LOW TONE)
3.	3E-0075 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
4.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
5.	4M-7146	[1]	STRAP AS-GROUND
6.	9S-0174	[1]	CIRCUIT BREAKER AS (60-AMPERE)(ALTERNATOR)
	7X-3182	[2]	BOLT (1/4-28X0.5-IN)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
7.	117-9982 Y	[1]	CONSOLE GP-INSTRUMENT
8.	8T-4189 M	[5]	BOLT (M8X1.25X20-MM)
9.	5P-4116	[5]	WASHER-HARD (8.8X20.5X2-MM THK)
10.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
13.	7K-1181	[17]	STRAP-CABLE
14.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
15.	112-6646 M	[14]	LOCKNUT (M6X1-THD)
16.	8T-4138 M	[18]	BOLT (M6X1X20-MM)
17.	117-0842	[1]	HARNESS AS-PLATFORM
	1S-9593	[15]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-5519	[7]	PLUG AS-CONNECTOR (5-PIN)
	8T-8737	[11]	PLUG-SEAL
	7G-7918	[6]	PLUG-SEAL
	9G-4348	[2]	HOUSING-PLUG (4-GA TO 6-GA)
	9G-4349	[1]	HOUSING-PLUG
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	9G-4352	[1]	HOUSING-RECEPTACLE (8-GA TO 10-GA)
	9X-0146	[2]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-7144	[1]	PLUG AS-CONNECTOR (24-PIN)
	2L-8068	[1]	TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-1475	[4]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	6V-1614 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.3-M)
	2L-8079	[4]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8N-1547	[2]	SOCKET-CONNECTOR (6-GA)
	186-3735	[40]	PIN-CONNECTOR (16-GA TO 18-GA)
	030-1712	[1]	TERMINAL-RING (2-GA, 1/4-IN SCREW)
	9X-1056	[41]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
18.	109-1035 Y	[1]	CONSOLE GP-OPERATOR
19.	2S-9556	[2]	SCREW-MACHINE (10-32X0.875-IN)
20.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
21.	3B-4502	[2]	LOCKWASHER
22.	9G-9154	[2]	CLIP
23.	3K-6060	[1]	LOCKNUT (3/8-16-THD)
24.	8M-2773	[2]	CLIP (LOOP)
25.	7C-4354	[2]	CLIP
26.	8T-4133 M	[2]	NUT (M10X1.5-THD)
27.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
28.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	8T-8799	[6]	BOOT (RED)
30.	6V-8188	[1]	NUT (1/2-13-THD)
31.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

125-6726: WIRING GP-PLATFORM

WIRING GP-PLATFORM

125-6726 WIRING GP-PLATFORM
S/N 5ZN162-189
PART OF 116-2629 OPERATOR AR

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(ENGINE OIL PRESSURE)
1A.	3E-5239	[1]	RELAY AS (24-VOLT)(COOLANT TEMPERATURE)
1B.	3E-5239	[1]	RELAY AS (24-VOLT)(WARNING LIGHT)
1C.	3E-5239	[1]	RELAY AS (24-VOLT)(HYDRAULIC OIL TEMP)
1D.	3E-5239	[1]	RELAY AS (24-VOLT)(FUNCTIONAL LIGHT)
1E.	3E-5239	[1]	RELAY AS (24-VOLT)(BRAKE ONE)
1F.	3E-5239	[1]	RELAY AS (24-VOLT)(BRAKE TWO)
1G.	3E-5239	[1]	RELAY AS (24-VOLT)(NEUTRAL START ONE)
1H.	3E-5239	[1]	RELAY AS (24-VOLT)(NEUTRAL START TWO)
1I.	3E-5239	[1]	RELAY AS (24-VOLT)(LOW CHARGE)
2.	163-1201	[2]	HORN AS (24-VOLT, LOW TONE)
3.	3E-0075 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
4.	101-7740	[1]	SWITCH AS-MAGNETIC (MAIN RELAY)
	4F-2294	[2]	NUT-JAM (5/16-24-THD)
	6V-8186	[2]	NUT-FULL (5/16-24-THD)
	186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5.	8R-6359	[1]	STRAP AS
6.	9S-0174	[1]	CIRCUIT BREAKER AS (60-AMPERE)(ALTERNATOR)
	7X-3182	[2]	BOLT (1/4-28X0.5-IN)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
7.	117-9982 Y	[1]	CONSOLE GP-INSTRUMENT
8.	8T-4189 M	[5]	BOLT (M8X1.25X20-MM)
9.	5P-4116	[5]	WASHER-HARD (8.8X20.5X2-MM THK)
10.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
13.	7K-1181	[19]	STRAP-CABLE
14.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
15.	112-6646 M	[14]	LOCKNUT (M6X1-THD)
16.	8T-4138 M	[18]	BOLT (M6X1X20-MM)
17.	117-0842	[1]	HARNESS AS-PLATFORM
	1S-9593	[15]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-5519	[7]	PLUG AS-CONNECTOR (5-PIN)
	8T-8737	[11]	PLUG-SEAL
	7G-7918	[6]	PLUG-SEAL
	9G-4348	[2]	HOUSING-PLUG (4-GA TO 6-GA)
	9G-4349	[1]	HOUSING-PLUG
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	9G-4352	[1]	HOUSING-RECEPTACLE (8-GA TO 10-GA)
	9X-0146	[2]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-7144	[1]	PLUG AS-CONNECTOR (24-PIN)
	2L-8068	[1]	TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-1475	[4]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	6V-1614 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.3-M)
	2L-8079	[4]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8N-1547	[2]	SOCKET-CONNECTOR (6-GA)
	186-3735	[40]	PIN-CONNECTOR (16-GA TO 18-GA)
	030-1712	[1]	TERMINAL-RING (2-GA, 1/4-IN SCREW)
	9X-1056	[41]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
18.	109-1035 Y	[1]	CONSOLE GP-OPERATOR
19.	2S-9556	[2]	SCREW-MACHINE (10-32X0.875-IN)
20.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
21.	3B-4502	[2]	LOCKWASHER
22.	9G-9154	[2]	CLIP
23.	8T-8799	[6]	BOOT (RED)
24.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	7C-4354	[3]	CLIP
26.	8T-4133 M	[2]	NUT (M10X1.5-THD)
27.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
28.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	6V-8188	[2]	NUT (1/2-13-THD)
30.	3K-6060	[1]	LOCKNUT (3/8-16-THD)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

125-6726: WIRING GP-PLATFORM

WIRING GP-PLATFORM

125-6726 WIRING GP-PLATFORM
S/N 5ZN190-UP
PART OF 116-2629 OPERATOR AR

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(ENGINE OIL PRESSURE)
1A.	3E-5239	[1]	RELAY AS (24-VOLT)(COOLANT TEMPERATURE)
1B.	3E-5239	[1]	RELAY AS (24-VOLT)(WARNING LIGHT)
1C.	3E-5239	[1]	RELAY AS (24-VOLT)(HYDRAULIC OIL TEMP)
1D.	3E-5239	[1]	RELAY AS (24-VOLT)(FUNCTIONAL LIGHT)
1E.	3E-5239	[1]	RELAY AS (24-VOLT)(BRAKE ONE)
1F.	3E-5239	[1]	RELAY AS (24-VOLT)(BRAKE TWO)
1G.	3E-5239	[1]	RELAY AS (24-VOLT)(NEUTRAL START ONE)
1H.	3E-5239	[1]	RELAY AS (24-VOLT)(NEUTRAL START TWO)
1I.	3E-5239	[1]	RELAY AS (24-VOLT)(LOW CHARGE)
2.	163-1201	[2]	HORN AS (24-VOLT, LOW TONE)
3.	3E-0075 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
4.	167-0138 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
5.	8R-6359	[1]	STRAP AS
6.	9S-0174	[1]	CIRCUIT BREAKER AS (60-AMPERE)(ALTERNATOR)
	7X-3182	[2]	BOLT (1/4-28X0.5-IN)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
7.	117-9982 Y	[1]	CONSOLE GP-INSTRUMENT
8.	8T-4189 M	[5]	BOLT (M8X1.25X20-MM)
9.	5P-4116	[5]	WASHER-HARD (8.8X20.5X2-MM THK)
10.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
13.	7K-1181	[19]	STRAP-CABLE
14.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
15.	112-6646 M	[14]	LOCKNUT (M6X1-THD)
16.	8T-4138 M	[18]	BOLT (M6X1X20-MM)
17.	117-0842	[1]	HARNESS AS-PLATFORM
	1S-9593	[15]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-5519	[7]	PLUG AS-CONNECTOR (5-PIN)
	8T-8737	[11]	PLUG-SEAL
	7G-7918	[6]	PLUG-SEAL
	9G-4348	[2]	HOUSING-PLUG (4-GA TO 6-GA)
	9G-4349	[1]	HOUSING-PLUG
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	9G-4352	[1]	HOUSING-RECEPTACLE (8-GA TO 10-GA)
	9X-0146	[2]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
	9X-7144	[1]	PLUG AS-CONNECTOR (24-PIN)
	2L-8068	[1]	TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-1475	[4]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	6V-1614 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.3-M)
	2L-8079	[4]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8N-1547	[2]	SOCKET-CONNECTOR (6-GA)
	186-3735	[40]	PIN-CONNECTOR (16-GA TO 18-GA)
	030-1712	[1]	TERMINAL-RING (2-GA, 1/4-IN SCREW)
	9X-1056	[41]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
18.	109-1035 Y	[1]	CONSOLE GP-OPERATOR
19.	2S-9556	[2]	SCREW-MACHINE (10-32X0.875-IN)
20.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
21.	3B-4502	[2]	LOCKWASHER
22.	9G-9154	[2]	CLIP
23.	8T-8799	[6]	BOOT (RED)
24.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	7C-4354 C	[2]	CLIP
26.	8T-4133 M	[2]	NUT (M10X1.5-THD)
27.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
28.	8T-4896 C	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	6V-8188	[2]	NUT (1/2-13-THD)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

117-2656: AXLE & MTG GP-DRIVE

AXLE & MTG GP-DRIVE

117-2656 AXLE & MTG GP-DRIVE
S/N 5ZN1-163
PART OF 119-4994 POWER TRAIN AR

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-7530 Y	[1]	AXLE GP
2.	8S-4734	[6]	BOLT (9/16-12X2-IN)
3.	5P-8246	[6]	WASHER-HARD (15.5X29X3-MM THK)
4.	7X-8144 Y	[1]	PLANETARY GP-FINAL DRIVE
5.	6S-3002	[1]	SEAL-O-RING
6.	6R-1538	[2]	PLATE
7.	2H-3756	[4]	BOLT (5/8-11X9-IN)
8.	5P-8247	[8]	WASHER-HARD (17X32X3.5-MM THK)
9.	4K-0367	[4]	NUT-FULL (5/8-11-THD)
10.	1D-4624	[8]	BOLT (3/4-10X9-IN)
11.	5P-8248	[16]	WASHER-HARD (20X36.5X3.5-MM THK)
12.	2J-3506	[8]	NUT-FULL (3/4-10-THD)
13.	1G-8271 B	[2]	SHIM
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

117-2656: AXLE & MTG GP-DRIVE

AXLE & MTG GP-DRIVE

117-2656 AXLE & MTG GP-DRIVE
S/N 5ZN164-UP
PART OF 119-4994 POWER TRAIN AR
Type 1

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	138-2496 CY	[1]	AXLE GP
2.	8S-4734	[6]	BOLT (9/16-12X2-IN)
3.	5P-8246	[6]	WASHER-HARD (15.5X29X3-MM THK)
4.	7X-8144 Y	[1]	PLANETARY GP-FINAL DRIVE
5.	6S-3002	[1]	SEAL-O-RING
6.	6R-1538	[2]	PLATE
7.	2H-3756	[4]	BOLT (5/8-11X9-IN)
8.	5P-8247	[8]	WASHER-HARD (17X32X3.5-MM THK)
9.	4K-0367	[4]	NUT-FULL (5/8-11-THD)
10.	1D-4624	[8]	BOLT (3/4-10X9-IN)
11.	5P-8248	[16]	WASHER-HARD (20X36.5X3.5-MM THK)
12.	2J-3506	[8]	NUT-FULL (3/4-10-THD)
13.	1G-8271 B	[2]	SHIM
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

117-2656: AXLE & MTG GP-DRIVE

AXLE & MTG GP-DRIVE

117-2656 AXLE & MTG GP-DRIVE
S/N 5ZN164-UP
PART OF 119-4994 POWER TRAIN AR
Type 2

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-8694 CY	[1]	AXLE GP
2.	8S-4734	[6]	BOLT (9/16-12X2-IN)
3.	5P-8246	[6]	WASHER-HARD (15.5X29X3-MM THK)
4.	7X-8144 Y	[1]	PLANETARY GP-FINAL DRIVE
5.	6S-3002	[1]	SEAL-O-RING
6.	6R-1538	[2]	PLATE
7.	2H-3756	[4]	BOLT (5/8-11X9-IN)
8.	5P-8247	[8]	WASHER-HARD (17X32X3.5-MM THK)
9.	4K-0367	[4]	NUT-FULL (5/8-11-THD)
10.	1D-4624	[8]	BOLT (3/4-10X9-IN)
11.	5P-8248	[16]	WASHER-HARD (20X36.5X3.5-MM THK)
12.	2J-3506	[8]	NUT-FULL (3/4-10-THD)
13.	1G-8271 B	[2]	SHIM
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

321-9749: AXLE & MTG GP-DRIVE

AXLE & MTG GP-DRIVE

321-9749 AXLE & MTG GP-DRIVE
S/N 5ZN1-UP
FIELD REPLACEMENT FOR @@@@@168-8694@@@@@

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
2.	8T-4131 M	[8]	NUT (M20X2.5-THD)
3.	136-8873 Y	[1]	AXLE GP
4.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

117-7530: AXLE GP

AXLE GP

117-7530 AXLE GP
S/N 5ZN1-163
PART OF 117-2656 AXLE & MTG GP-DRIVE

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	121-6976	[1]	HOUSING (RH)
2.	6K-0137	[11]	BOLT-LOCKING (5/8-11X2-IN)
3.	055-1259	[1]	HOUSING-BRAKE
4.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
5.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
6.	7X-3374	[12]	NUT-FULL (1/2-20-THD)
7.	7R-8987	[1]	CASE AS
8.	7R-8971	[1]	GEAR SET
			(INCLUDES RING GEAR & PINION GEAR)
9.	103-0616	[2]	GEAR (18-TEETH)
10.	103-0615	[2]	SPRING
11.	103-0614	[2]	RETAINER
12.	103-0623	[2]	GEAR (40-TEETH)
13.	103-0622	[1]	SPIDER
14.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
15.	2S-0480	[1]	CUP-TAPERED ROLLER
16.	9R-2509	[1]	PLUG
17.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
18.	9R-2494	[1]	RING
19.	7R-8970	[1]	BEARING
20.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
21.	9R-2446 B	[1]	SPACER (45.86X50.98X31.858-MM THK)
22.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
23.	9R-2512	[1]	SEAL
24.	7R-8974	[1]	RETAINER AS
25.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
26.	103-0617	[1]	BEARING
27.	9R-2496	[1]	SEAL
28.	9R-2499	[1]	SEAL AS
29.	9R-2498	[1]	RETAINER
30.	3K-3379	[10]	BOLT (9/16-12X1-IN)
31.	3B-4509	[10]	LOCKWASHER
32.	9R-6602	[2]	PLUG-MAGNETIC (REAR AXLE)
33.	9R-2485	[8]	BOLT (1/2-13X2.87-IN)
34.	9R-2484	[2]	BUSHING-TERMINAL
35.	9R-2508	[1]	HOUSING
36.	9R-2427 B	[2]	SHIM (0.965-MM THK)
	9R-2428 B	[2]	SHIM (1.118-MM THK)
	9R-2429 B	[2]	SHIM (1.27-MM THK)
	9R-2430 B	[2]	SHIM (1.422-MM THK)
	9R-2431 B	[2]	SHIM (1.575-MM THK)
	9R-2432 B	[2]	SHIM (1.727-MM THK)
	9R-2433 B	[2]	SHIM (1.88-MM THK)
	9R-2434 B	[2]	SHIM (2.032-MM THK)
37.	102-8455	[12]	BOLT
38.	6B-6684	[4]	NUT-FULL (1/2-20-THD)
39.	055-1258	[1]	HOUSING-BRAKE (RH)
40.	055-1260	[2]	HOUSING-BRAKE (OUTER)
41.	9R-2424	[2]	GEAR (16-TEETH)
42.	9R-2412	[4]	STUD
43.	9R-2414	[2]	GEAR (56-TEETH)
44.	9R-2426	[2]	LOCK
45.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
46.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
47.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
48.	9R-2421	[6]	SHAFT
49.	9R-2423	[2]	CARRIER AS
			(EACH INCLUDES)
	9R-2421	[3]	SHAFT
50.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
51.	186-4118	[3]	GEAR-PLANETARY (20-TEETH)
52.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
53.	9R-2419	[3]	KIT-BEARING
			(EACH KIT INCLUDES NEEDLES)
54.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
55.	9R-2420	[1]	RETAINER
56.	8S-9151	[2]	CUP-BEARING
57.	9R-2495	[2]	SEAL
58.	9R-2413	[4]	STUD
59.	9S-1354	[4]	NUT (5/8-18-THD)
60.	6K-0137	[10]	BOLT-LOCKING (5/8-11X2-IN)
61.	121-6977	[1]	HOUSING (LH)
62.	6V-1997	[1]	BOLT-SELF-LOCKING (5/8-11X2.75-IN)
63.	6Y-7652	[2]	CUP-BEARING (TAPERED ROLLER)
64.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
65.	9R-2410	[2]	RETAINER AS
66.	9R-6223	[2]	SEAL
67.	117-7533	[2]	SHAFT
68.	9R-5219	[16]	BOLT-SPECIAL
69.	102-8459	[8]	DISC
70.	102-8458	[4]	DISC
71.	055-1256	[4]	LINK-PLAIN
72.	102-8457	[4]	DISC
73.	9R-2473	[12]	BALL
74.	9R-2472	[8]	SPRING
75.	055-1255	[2]	PIN-PIVOT
76.	1B-4430	[2]	NUT-JAM (1/2-20-THD)
77.	055-1244	[2]	ROD-BRAKE CONTROL
78.	9R-6573	[2]	SEAL AS-BOOT
79.	102-8452	[2]	RETAINER
80.	102-8453	[2]	U-BOLT
81.	102-8466	[4]	BOLT-FLANGE HEAD
82.	3B-4617	[2]	PIN-COTTER
83.	9R-2475	[2]	PIN
84.	6B-6683	[4]	NUT (5/8-18-THD)
85.	102-8463	[4]	WASHER
86.	102-8454	[2]	BRACKET
87.	102-8465	[4]	NUT-FLANGE
88.	3K-6060	[4]	LOCKNUT (3/8-16-THD)
89.	102-8461 B	[2]	SHIM
90.	102-8468	[2]	SPRING
91.	102-8477	[2]	STOP
92.	102-8467	[2]	RETAINER
93.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
94.	102-8464	[2]	PLUG-END
95.	102-8460	[2]	SPRING
96.	102-8476	[2]	SCREW-PURGE
97.	102-8469	[2]	PLUG
98.	102-8595	[1]	KIT-CYLINDER
99.	102-8594	[1]	CYLINDER-BRAKE
	B		USE AS REQUIRED
	M		METRIC PART

136-8873: AXLE GP

AXLE GP

136-8873 AXLE GP
S/N 5ZN1-UP
PART OF 321-9749 AXLE & MTG GP-DRIVE

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	055-1260	[2]	HOUSING-BRAKE (OUTER)
2.	055-1259	[1]	HOUSING-BRAKE
3.	9X-8876	[12]	BOLT (1/2-13X4.75-IN)
4.	8M-3171	[4]	NUT (1/2-20-THD)
5.	055-1258	[1]	HOUSING-BRAKE (RH)
6.	9R-2474	[2]	PIN
7.	9R-2412	[4]	STUD
8.	239-9956	[8]	DISC-BRAKE
9.	102-8458	[4]	DISC
10.	102-8457	[2]	DISC
11.	9R-2472	[8]	SPRING
12.	9R-2473	[12]	BALL
13.	055-1255	[4]	PIN-PIVOT
14.	055-1256	[4]	LINK-PLAIN
15.	055-1244	[2]	ROD-BRAKE CONTROL
16.	9R-6573	[2]	SEAL AS-BOOT
17.	9R-2475	[2]	PIN
18.	3B-4617	[2]	PIN-COTTER
19.	1B-4430	[4]	NUT-JAM (1/2-20-THD)
20.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
21.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
22.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
23.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
24.	9R-2426	[2]	LOCK
25.	9R-2414	[2]	GEAR (56-TEETH)
26.	9R-2495	[1]	SEAL
27.	8S-9151	[2]	CUP-BEARING
28.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
29.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
30.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
31.	144-5392	[1]	BLOCK-THRUST
32.	3B-4507	[2]	LOCKWASHER
33.	0T-0318	[2]	BOLT (7/16-14X1-IN)
34.	7R-8971	[1]	GEAR SET
35.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
36.	9R-2424	[2]	GEAR (16-TEETH)
37.	163-0053 Y	[1]	DIFFERENTIAL GP
38.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
39.	2S-0480	[1]	CUP-TAPERED ROLLER
40.	186-4117	[2]	CARRIER AS
			(EACH INCLUDES)
40A.	9R-2420	[1]	RETAINER
40B.	186-4118	[3]	GEAR-PLANETARY (20-TEETH)
40C.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
40D.	9R-2419	[3]	KIT-BEARING
40E.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
40F.	9R-2421	[3]	SHAFT
40G.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
41.	7R-8983	[1]	PLUG
42.	176-2570 Y	[1]	CYLINDER GP-BRAKE
43.	208-8890	[1]	HOUSING-AXLE (RH)
	208-8891	[1]	HOUSING-AXLE (LH)
44.	102-8466	[4]	BOLT-FLANGE HEAD
45.	102-8453	[2]	U-BOLT
46.	9S-1354	[8]	NUT (5/8-18-THD)
47.	102-8463	[4]	WASHER
48.	102-8454	[2]	BRACKET
49.	9R-2413	[4]	STUD
50.	102-8465	[4]	NUT-FLANGE
51.	3K-6060	[4]	LOCKNUT (3/8-16-THD)
52.	102-8461 B	[2]	SHIM
53.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
54.	6Y-7652	[2]	CUP-BEARING (TAPERED ROLLER)
55.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
56.	118-5839	[2]	SEAL-REAR AXLE
57.	9R-6602	[1]	PLUG-MAGNETIC (REAR AXLE)
58.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
58A.	9R-5219	[8]	BOLT-SPECIAL
59.	7R-8978	[1]	RING
60.	179-7021	[2]	LOCKNUT
61.	7R-8977	[1]	WASHER
62.	7R-8975	[1]	WASHER
63.	7T-6653	[1]	CONE-BEARING (TAPERED ROLLER)
64.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
65.	7R-8974	[1]	RETAINER AS
66.	9R-2512	[1]	SEAL
67.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
68.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
69.	7R-8970	[1]	BEARING
70.	9R-2494	[1]	RING
71.	5F-5434	[1]	VALVE AS-VENT
72.	1B-5174	[2]	PLUG-PIPE
73.	2B-7408	[1]	PLUG-PIPE
74.	144-7225	[1]	HOUSING-DIFFERENTIAL
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

138-2496: AXLE GP

AXLE GP

138-2496 AXLE GP
S/N 5ZN164-UP
PART OF 117-2656 AXLE & MTG GP-DRIVE

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	055-1260	[2]	HOUSING-BRAKE (OUTER)
2.	055-1259	[1]	HOUSING-BRAKE
3.	9X-8876	[12]	BOLT (1/2-13X4.75-IN)
4.	8M-3171	[4]	NUT (1/2-20-THD)
5.	055-1258	[1]	HOUSING-BRAKE (RH)
6.	9R-2474	[2]	PIN
7.	9R-2412	[4]	STUD
8.	133-7234	[8]	DISC-FRICTION
9.	102-8458	[4]	DISC
10.	102-8457	[2]	DISC
11.	9R-2472	[8]	SPRING
12.	9R-2473	[12]	BALL
13.	055-1255	[4]	PIN-PIVOT
14.	055-1256	[4]	LINK-PLAIN
15.	055-1244	[2]	ROD-BRAKE CONTROL
16.	9R-6573	[2]	SEAL AS-BOOT
17.	9R-2475	[2]	PIN
18.	3B-4617	[2]	PIN-COTTER
19.	1B-4430	[4]	NUT-JAM (1/2-20-THD)
20.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
21.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
22.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
23.	8S-9151	[2]	CUP-BEARING
24.	9R-2424	[2]	GEAR (16-TEETH)
25.	9R-2414	[2]	GEAR (56-TEETH)
26.	9R-2426	[2]	LOCK
27.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
28.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
29.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
30.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
31.	7R-8987	[1]	CASE AS
32.	7R-8971	[1]	GEAR SET
			(INCLUDES RING & PINION GEAR)
33.	144-5392	[1]	BLOCK-THRUST
34.	3B-4507	[2]	LOCKWASHER
35.	0T-0318	[2]	BOLT (7/16-14X1-IN)
36.	9R-2484	[2]	BUSHING-TERMINAL
37.	7R-8988	[1]	DIFFERENTIAL AS
38.	103-0616	[2]	GEAR (18-TEETH)
39.	103-0614	[2]	RETAINER
40.	103-0615	[2]	SPRING
41.	103-0623	[2]	GEAR (40-TEETH)
42.	103-0622	[1]	SPIDER
43.	9R-2485	[1]	BOLT (1/2-13X2.87-IN)
44.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
45.	2S-0480	[1]	CUP-TAPERED ROLLER
46.	102-8469	[2]	PLUG
47.	102-8476	[2]	SCREW-PURGE
48.	102-8594	[1]	CYLINDER-BRAKE
49.	102-8464	[2]	PLUG-END
50.	102-8466	[4]	BOLT-FLANGE HEAD
51.	102-8453	[2]	U-BOLT
52.	9S-1354	[4]	NUT (5/8-18-THD)
53.	102-8463	[4]	WASHER
54.	102-8454	[2]	BRACKET
55.	9R-2413	[4]	STUD
56.	102-8465	[4]	NUT-FLANGE
57.	3K-6060	[4]	LOCKNUT (3/8-16-THD)
58.	102-8461 B	[2]	SHIM
59.	102-8468	[2]	SPRING
60.	102-8477	[2]	STOP
61.	102-8467	[2]	RETAINER
62.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
63.	102-8460	[2]	SPRING
64.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
65.	7R-8978	[1]	RING
66.	7R-8976	[2]	NUT
67.	7R-8977	[1]	WASHER
68.	7R-8975	[1]	WASHER
69.	103-0617	[1]	BEARING
70.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
71.	7R-8974	[1]	RETAINER AS
72.	9R-2512	[1]	SEAL
73.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
74.	7R-8970	[1]	BEARING
75.	9R-2494	[1]	RING
76.	9R-2509	[1]	PLUG
77.	1B-5174	[1]	PLUG-PIPE
78.	2B-7408	[1]	PLUG-PIPE
79.	144-7225	[1]	HOUSING-DIFFERENTIAL
80.	9R-6602	[1]	PLUG-MAGNETIC (REAR AXLE)
81.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
81A.	9R-5219	[8]	BOLT-SPECIAL
82.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
83.	118-5839	[2]	SEAL-REAR AXLE
84.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
85.	6Y-7652	[2]	CUP-BEARING (TAPERED ROLLER)
86.	144-4623	[1]	HOUSING
87.	144-7233	[1]	HOUSING
88.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
89.	7R-8983	[1]	PLUG
90.	9R-2495	[1]	SEAL
91.	186-4117	[2]	CARRIER AS
			(EACH INCLUDES)
	9R-2419	[3]	KIT-BEARING
			(EACH KIT INCLUDES NEEDLES)
91A.	9R-2420	[1]	RETAINER
91B.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
91C.	9R-2421	[3]	SHAFT
91D.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
91E.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
91F.	186-4118	[3]	GEAR-PLANETARY (20-TEETH)

			AVAILABLE REPAIR KIT(S):
	102-8595	[1]	KIT-CYLINDER
	B		USE AS REQUIRED
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Two-position Electronic Throttle Control Installation Procedure{1000, 1408, 7000, 7451}
Two-position Electronic Throttle Control Installation Procedure{1000, 1408, 7000, 7451}

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3114, 3116, and 3126 Engines

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Disassembly and Assembly

Steering Control Unit (SCU)
CS-531 & CS-531C VIBRATORY COMPACTORS MACHINE SYSTEMS

Service Magazine

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

Maintenance Free Batteries{1401}
1986/03/10

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

Wiring Harness Conduit Component Sizes {1408}
1995/02/13

Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29

Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02

Methods Of Obtaining Engine Flash Files {1902}
1997/01/20

Improved Switches Now Used To Prevent Open Contacts{1423}
1997/08/11

Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24

Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog CS-531C :

Truck sale:

USD $32,000

1999 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea

USD $27,000

1996 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea

USD $25,000

1997 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea

USD $29,000

1999 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea