AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

132-5238 GOVERNOR GP-UNIT INJECTOR S/N 98Z21190-UP PART OF 133-4247 ENGINE AR CS-563C VIBRATORY COMPACTOR


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL

VIBRATORY COMPACTOR CS-563C VIBRATORY COMPACTOR 4KN
 CS-563C, CP-563C Vibratory Compactors 4KN00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0135 CS-563C 4KN   (1994)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
132-5238 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
133-3062 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
133-3960 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
7E-7661 GOVERNOR GP-UNIT INJECTOR
 

#KEBP01350140
 

132-5238: GOVERNOR GP-UNIT INJECTOR

132-5238 GOVERNOR GP-UNIT INJECTOR
S/N 98Z21190-UP
PART OF 133-4247 ENGINE AR
i00496363 KEBP0135
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  133-3960 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01350141
 

133-3062: GOVERNOR GP-UNIT INJECTOR

133-3062 GOVERNOR GP-UNIT INJECTOR
S/N 98Z21190-UP
PART OF 133-3960 GOVERNOR GP-UNIT INJECTOR
i00123890 KEBP0135
1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme 1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7325 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
2. 129-3897 [1] VALVE  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 100-5740 [1] SPRING-TORSION  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [2] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING (TOLERANCE)  
31. 7C-5148 [1] CARRIER-FLYWEIGHT  
32. 2S-7316 [2] DOWEL  
33. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
34. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
35. 4P-8947 [1] RISER  
36. 4P-0737 [1] SHAFT-RISER  
37. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
38. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
39. 7L-3386 [1] SEAL-O-RING  
40. 7C-5884 [1] COVER-OIL SUMP  
41. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
42. 4P-4231 [1] COVER-REAR  
43. 6V-5100 [1] SEAL-O-RING  
44. 7C-5883 B [7] SHIM (0.25-MM THK)  
45. 7W-5591 [1] SEAT-GOVERNOR SPRING  
46. 7C-3776 [1] PISTON AS  
46A. 4N-6407 [1] SPOOL-DASHPOT  
46B. 4N-6404 [1] RING-RETAINING  
46C. 4N-6406 [1] RING-SPACER  
47. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
48. 7W-8993 [2] WEIGHT  
49. 7C-5541 [2] PLATE  
50. 7W-1440 B [8] SHIM (0.12-MM THK)  
51. 115-1192 [1] SEAL-GOVERNOR HOUSING  
52. 7C-2743 [2] RACE  
53. 7W-5561 [1] BEARING-THRUST  
54. 8C-5061 [1] RING-RETAINING  
55. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
56. 7C-5150 [1] PIN  
57. 117-9099 [1] FLANGE  
58. 9Y-1837 [1] SPRING  
59. 125-8158 [1] SLEEVE-RACK CONTROL  
60. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
61. 5P-9757 [1] SEAL-O-RING  
62. 109-4587 [1] RING-TOLERANCE  
63. 6D-9953 [1] PIN-SPRING  
64. 8T-1460 [2] RING-RETAINING  
65. 108-1612 [1] CLEVIS  
66. 7C-8854 [1] PIN-CLEVIS  
67. 108-1613 [1] PISTON-SERVO  
68. 8C-3312 [1] RING-RETAINING  
69. 114-2897 [1] COVER-FUEL RATIO CONTROL  
70. 7N-2171 [1] RING-RETAINING  
71. 7W-5324 [1] BEARING  
72. 115-2553 [1] VALVE-GOVERNOR SERVO  
73. 100-4390 [1] SPRING  
74. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
75. 129-4284 [1] SEAT-SPRING  
76. 6I-1564 [1] DIAPHRAGM  
77. 114-2899 [1] RETAINER-DIAPHRAGM  
78. 100-4392 [1] SPRING-SERVO  
79. 100-4394 [1] SEAT-SPRING  
80. 8N-5763 [1] SEAL  
81. 8N-5764 [1] PISTON  
82. 100-4393 [1] SPRING-RETURN  
83. 100-4397 [1] BODY-VALVE  
84. 100-5737 M [1] SETSCREW-ADJUSTMENT  
85. 100-5738 M [1] NUT (M6X0.5-THD)  
86. 2M-9780 [2] SEAL-O-RING  
87. 128-4786 [2] PLUG  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01350142
 

133-3960: GOVERNOR GP-UNIT INJECTOR

133-3960 GOVERNOR GP-UNIT INJECTOR
S/N 98Z21190-UP
PART OF 132-5238 GOVERNOR GP-UNIT INJECTOR
i00501680 KEBP0135
1333960 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-3062 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 100-4589 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7C-5989 [1] PLATE-GOVERNOR INFORMATION  
7. 7E-0155 [1] SCREEN AS-FUEL  
8. 100-4391 [1] SPRING-OIL SIDE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01350143
 

4P-5512: GOVERNOR GP-UNIT INJECTOR

4P-5512 GOVERNOR GP-UNIT INJECTOR
S/N 98Z5500-UP
PART OF 7E-7661 GOVERNOR GP-UNIT INJECTOR
i00384144 KEBP0135
4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6179 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01350144
 

4P-5512: GOVERNOR GP-UNIT INJECTOR

4P-5512 GOVERNOR GP-UNIT INJECTOR
S/N 98Z5500-21189
PART OF 7E-7661 GOVERNOR GP-UNIT INJECTOR
i00384146 KEBP0135
4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-4852 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01350145
 

7E-7661: GOVERNOR GP-UNIT INJECTOR

7E-7661 GOVERNOR GP-UNIT INJECTOR
S/N 98Z5500-21189
PART OF 111-7717, 133-4247 ENGINE AR
i00387876 KEBP0135
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  4P-5512 Y [1] GOVERNOR GP-UNIT INJECTOR  
    S/N 98Z5500-21189
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01350146
 

118-6505: LINES GP-FUEL

118-6505 LINES GP-FUEL
S/N 4KN1-406; 5JN1-279
PART OF 116-2611 INSTALLATION AR-ENGINE
i00485981 KEBP0135
1186505 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2773 [8] CLIP (LOOP)  
2. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
3. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
4. 110-1968 I [1] HOSE AS  
5. 137-4065 I [1] HOSE AS  
6. 137-4066 I [1] HOSE AS  
7. 3J-1907 [2] SEAL-O-RING  
8. 6V-8636 [2] CONNECTOR  
9. 6V-8397 [6] SEAL-O-RING  
10. 3K-0360 [1] SEAL-O-RING  
11. 6V-8723 [1] ELBOW  
12. 2M-9780 [1] SEAL-O-RING  
13. 9X-2134 [1] ELBOW  
14. 103-7268 [2] ADAPTER  
15. 5B-1309 [1] COUPLING-PIPE  
16. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 4L-6454 [1] BOLT (3/8-16X1-IN)  
18. 4S-1962 [1] CLIP (LOOP)  
19. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
20. 5C-7261 M [1] NUT (M8X1.25-THD)  
21. 6W-2463 [2] CLAMP  
22. 3V-0046 [1] PLATE  
23. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
24. 5E-9622 [2] SPACER (9.08X15.88X22-MM THK)  
25. 8T-3647 M [1] BOLT (M8X1.25X80-MM)  
26. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP01350147
 

125-4459: LINES GP-FUEL

125-4459 LINES GP-FUEL
S/N 4KN407-686; 5JN280-452
PART OF 125-2644 INSTALLATION AR-ENGINE
i00521897 KEBP0135
1254459 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2773 [7] CLIP (LOOP)  
2. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
3. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
4. 110-1968 I [1] HOSE AS  
5. 137-4065 I [1] HOSE AS  
6. 137-4066 I [1] HOSE AS  
7. 3J-1907 [2] SEAL-O-RING  
8. 6V-8636 [2] CONNECTOR  
9. 6V-8397 [6] SEAL-O-RING  
10. 3K-0360 [1] SEAL-O-RING  
11. 6V-8723 [1] ELBOW  
12. 2M-9780 [1] SEAL-O-RING  
13. 9X-2134 [1] ELBOW  
14. 103-7268 [1] ADAPTER  
15. 5B-1309 [1] COUPLING-PIPE  
16. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 4L-6454 [1] BOLT (3/8-16X1-IN)  
18. 8T-3647 M [1] BOLT (M8X1.25X80-MM)  
19. 7R-8439 [4] CLAMP  
20. 7X-0440 [2] BOLT (5/16-18X1.75-IN)  
21. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
22. 3V-0046 [2] PLATE  
23. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
24. 5E-9622 [3] SPACER (9.08X15.88X22-MM THK)  
25. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
26. 2T-1925 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP01350148
 

140-1693: LINES GP-FUEL

140-1693 LINES GP-FUEL
S/N 4KN687-UP; 5JN453-UP
PART OF 140-1820 INSTALLATION AR-ENGINE
i00641432 KEBP0135
1401693 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-4066 I [1] HOSE AS  
2. 140-1701 I [1] HOSE AS  
3. 110-5288 I [1] HOSE AS  
4. 127-6449 Y [1] PUMP GP-FUEL PRM & WATER SEP  
5. 9S-8003 [2] PLUG (1/2-20-THD)  
6. 1J-9671 [4] SEAL-O-RING  
7. 8T-5043 [2] ADAPTER  
8. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 3P-0011 [2] SPACER (0.44X0.75X0.36-IN THK)  
11. 6V-8397 [6] SEAL-O-RING  
12. 103-7268 [1] ADAPTER  
13. 5B-1309 [1] COUPLING-PIPE  
14. 6V-8724 [1] ELBOW  
15. 3J-1907 [2] SEAL-O-RING  
16. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 4L-6454 [1] BOLT (3/8-16X1-IN)  
18. 6R-3341 [4] CLAMP  
19. 3V-0046 [2] PLATE  
20. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
21. 8M-2773 [5] CLIP (LOOP)  
22. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
23. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 003-9014 [1] ELBOW  
26. 6V-8636 [1] CONNECTOR  
27. 8C-6869 [1] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01350149
 

6I-2420: LINES GP-FUEL FILTER

6I-2420 LINES GP-FUEL FILTER
S/N 98Z5500-21189
PART OF 111-7717, 133-4247 ENGINE AR
FOR USE WITH 6I-2693 FILTER GP-FUEL
CANNOT BE USED WITH 7E-0589 FILTER & LINES GP-FUEL
i00122200 KEBP0135
6I2420 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [8] SEAL-O-RING  
6. 7W-0183 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [5] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
11. 115-4233 [1] TUBE AS  
12. 5F-7054 [1] SEAL-O-RING  
13. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
14. 7E-5190 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 8T-0151 [1] ADAPTER  
17. 7X-2459 [1] ADAPTER-TEE  
18. 3N-3252 [1] SPRING  
19. 5P-7813 [1] SEAL-O-RING  
20. 5P-1046 [1] CONNECTOR  
21. 5P-4961 [2] CLAMP-HOSE  
22. 5P-1442 E HOSE (78-CM)  
23. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
24. 6V-8774 [1] TEE  
25. 8T-0788 [1] ELBOW  
26. 115-4184 [1] TEE-O-RING PORT  
27. 4K-8864 [1] CLIP  
28. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
29. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
30. 8L-5449 [1] SPACER (0.375X0.75X0.69-IN THK)  
31. 068-9526 [1] CAP-TUBE  
32. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
33. 5C-7261 M [1] NUT (M8X1.25-THD)  
34. 3S-2093 [1] STRAP-CABLE  
35. 119-2955 [1] CLIP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
CP-563C and CS-563C Vibratory Compactors
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog CS-563C :

GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
FILTER & LINES GP-FUEL
140-9008 FILTER & LINES GP-FUEL
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
183-4680 CONTROL GP-GOVERNOR
GOVERNOR GP-UNIT INJECTOR
133-3062 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
133-3960 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
7E-7661 GOVERNOR GP-UNIT INJECTOR
LINES GP-FUEL
118-6505 LINES GP-FUEL
LINES GP-FUEL
125-4459 LINES GP-FUEL
LINES GP-FUEL
140-1693 LINES GP-FUEL

Truck sale:

Caterpillar CS-563C
 
Caterpillar CS-563C
- Single drum rollers
BLANCHARD MACHINERY CO.
Caterpillar CS563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
 
Caterpillar CS563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
- Single drum rollers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar CS-563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
28.500 
Caterpillar CS-563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
- Single drum rollers
FOLEY, INC.
Caterpillar CS563CAW, Construction
28,000 
Caterpillar CS563CAW, Construction
- Single drum rollers
MACALLISTER MACHINERY CO., INC
Caterpillar CS-563C, Construction
23,000 
Caterpillar CS-563C, Construction
- Single drum rollers
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.