AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

140-1697 CONTROL GP-DIRECTION & SPEED S/N 4LN760-760; 4LN789-789; 4LN793-796; 4LN801-806; 4LN808-UP; 5KN240-241; 5KN247-248; 5KN250-251; 5KN255-UP PART OF 140-9649 INSTALLATION AR-ENGINE CS-563C


OPERATOR STATION
CONTROL GP
CONTROL GP-STEERING
TILT GP-CAB

VIBRATORY COMPACTOR CS-563C VIBRATORY COMPACTOR 4LN
 CP-563C CS-563C Vibratory Compactors 4LN00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0136 CS-563C 4LN   (1995)

OPERATOR STATION

CONTROL GP
CONTROL GP-BLADE
7R-3147 CONTROL GP-BLADE
CONTROL GP-DIRECTION & SPEED
117-2909 CONTROL GP-DIRECTION & SPEED
CONTROL GP-DIRECTION & SPEED
140-1697 CONTROL GP-DIRECTION & SPEED
CONTROL GP-HANDLE
137-1613 CONTROL GP-HANDLE
CONTROL GP-HANDLE
1G-6588 CONTROL GP-HANDLE
 

#KEBP01360500
 

140-1697: CONTROL GP-DIRECTION & SPEED

140-1697 CONTROL GP-DIRECTION & SPEED
S/N 4LN760-760; 4LN789-789; 4LN793-796; 4LN801-806; 4LN808-UP; 5KN240-241; 5KN247-248; 5KN250-251; 5KN255-UP
PART OF 140-9649 INSTALLATION AR-ENGINE
i00821015 KEBP0136
1401697 CONTROL GP-DIRECTION & SPEED Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2675 [2] BOLT (1/4-20X1.75-IN)  
2. 3B-4611 [1] PIN-COTTER  
3. 2A-4133 [1] PIN  
4. 6V-8187 [3] NUT (1/4-28-THD)  
5. 5C-5440 [3] LOCKNUT (1/4-20-THD)  
6. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
7. 5P-9085 [1] CLIP (7.94MM ID)  
8. 8B-3768 [1] ROD END  
9. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 7X-2535 M [2] BOLT (M6X1X60-MM)  
11. 108-2989 M [3] BOLT (M8X1.25X130-MM)  
12. 4B-2049 [1] NUT (10-32-THD)  
13. 140-1704 [1] BRACKET-THROTTLE  
14. 034-7177 [1] BALL JOINT  
15. 9X-0816 [1] ROD-LINKAGE  
16. 7X-8130 [1] SPACER (6.4X16X5-MM THK)  
17. 7X-8128 [1] LINK  
18. 116-5250 [1] BRACKET-CABLE  
19. 7X-9936 [1] CABLE  
20. 109-3413 [1] CABLE GP-THROTTLE  
  132-3970 [1] BOOT  
21. 140-2242 [3] SPACER  
  M   METRIC PART
 

#KEBP01360501
 

137-1613: CONTROL GP-HANDLE

137-1613 CONTROL GP-HANDLE
S/N 4LN1-UP; 5KN1-UP
PART OF 147-0522 CONSOLE GP-OPERATOR, 129-2808 SWITCH GP-VIBRATORY
AN ATTACHMENT
i01096073 KEBP0136
1371613 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-1716 [4] SCREW (4-40X15.88-MM)  
2. 107-1723 [2] GASKET  
3. 107-1721 [1] CAP  
4. 107-1719 [1] SWITCH-PUSH BUTTON (VIBRATORY ON/OFF-MANUAL)  
5. 6B-4540 [6] NUT (4-40-THD)  
6. 113-1095 [2] HOUSING  
7. 107-2091 [2] BOLT (4-40X0.5-IN)  
8. 5V-1839 [1] LOCKNUT (1/2-13-THD)  
9. 086-0972 [1] SEAL-O-RING  
10. 140-9338 [1] BOOT  
11. 140-9335 [1] DISC-FRICTION  
12. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 166-8073 [1] RETAINER  
14. 8T-9370 [4] NUT AS-SPRING  
15. 8T-9368 [1] BOLT (1/4-20X2.25-IN)  
16. 6D-2928 [2] BOLT (1/4-20X1.125-IN)  
17. 7X-9441 [2] SPRING  
18. 140-9331 [1] BRACKET  
19. 137-4588 [1] BALL  
20. 137-4599 [1] BOLT-CARRIAGE  
21. 8T-9006 M [6] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
22. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
23. 8L-6521 [1] BOLT (10-32X0.5-IN)  
24. 166-8068 [1] CLAMP-CABLE  
25. 4L-1250 [1] LOCKNUT (10-32-THD)  
26. 171-2837 [1] CLIP  
27. 8T-2658 M [6] LOCKNUT (M3X0.5-THD)  
28. 171-2844 [1] SWITCH (BACK-UP ALARM)  
  171-2844 [2] SWITCH (VIBRATORY ON/OFF-AUTOMATIC)  
29. 140-9487 [1] SPACER  
30. 1B-4427 [2] NUT-JAM (1/4-20-THD)  
31. 166-8069 [1] SPACER  
32. 166-8076 [4] SPRING  
33. 2R-0504 [1] NUT (5/16-18-THD)  
34. 140-9340 [1] BUSHING  
35. 171-4349 [1] LEVER  
36. 150-6257 M [4] BOLT-SOCKET HEAD  
37. 171-2838 [2] SPACER  
  M   METRIC PART
 

#KEBP01360502
 

1G-6588: CONTROL GP-HANDLE

1G-6588 CONTROL GP-HANDLE
S/N 4LN1-UP; 5KN1-UP
PART OF 109-1035, 121-6951, 134-3842, 152-8122 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
i00351205 KEBP0136
1G6588 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-1716 [4] SCREW (4-40X15.88-MM)  
2. 107-1719 [1] SWITCH-PUSH BUTTON (VIBRATORY)  
3. 107-1721 [1] CAP  
4. 5L-4758 [1] SEAL-O-RING  
5. 107-1723 [2] GASKET  
6. 6B-4540 [6] NUT (4-40-THD)  
7. 113-1095 [2] HOUSING  
8. 107-2091 [2] BOLT (4-40X0.5-IN)  
9. 3H-3680 [1] NUT-JAM (1/2-13-THD)  
10. 113-1094 [1] LEVER  
 

#KEBP01360503
 

101-8677: CONTROL GP-STEERING

101-8677 CONTROL GP-STEERING
S/N 4LN1-382; 4LN390-417; 4LN421-435; 4LN439-440; 4LN443-443; 5KN1-189; 5KN191-192; 5KN196-199; 5KN209-210
PART OF 116-2628 OPERATOR AR
i00464244 KEBP0136
1018677 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-9787 Y [1] PUMP GP-METERING (HMU)  
2. 077-9543 [1] COLUMN-STEERING  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  4L-9337 [4] BOLT (3/8-16X1.5-IN)  
4. 3J-7354 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
  4J-5477 [1] SEAL-O-RING  
5. 032-1557 [1] STEERING WHEEL  
6. 077-6165 [1] NUT (13/16-20-THD)  
7. 1V-9385 [1] COVER-EMBLEM  
8. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
9. 3K-0360 [4] SEAL-O-RING  
  6V-8398 [4] SEAL-O-RING  
10. 6V-8625 [2] ELBOW  
11. 8T-1686 [2] ADAPTER-ELBOW  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01360504
 

121-6699: CONTROL GP-STEERING

121-6699 CONTROL GP-STEERING
S/N 4LN1-UP; 5KN1-UP
PART OF 122-5920 CAB AR
Type 1
AN ATTACHMENT
i00865074 KEBP0136
1216699 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-9787 Y [1] PUMP GP-METERING (HMU)  
2. 120-9768 [1] STEERING COLUMN  
3. 121-0457 [1] CLAMP  
4. 032-1557 [1] STEERING WHEEL  
5. 123-7703 [1] MOUNT AS  
6. 054-8671 [2] MOUNT  
7. 1V-9385 [1] COVER-EMBLEM  
8. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
9. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
11. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
12. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
13. 7X-7729 [2] WASHER (11X25X3-MM THK)  
14. 077-6165 [1] NUT (13/16-20-THD)  
15. 3K-0360 [4] SEAL-O-RING  
16. 6V-8639 [4] CONNECTOR  
17. 6V-8398 [2] SEAL-O-RING  
18. 3J-7354 [1] SEAL-O-RING  
19. 6V-8628 [1] ELBOW  
20. 4J-5477 [1] SEAL-O-RING  
21. 8T-9371 [2] BOLT (3/8-16X0.5-IN)  
22. [4] BOLT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01360505
 

121-6699: CONTROL GP-STEERING

121-6699 CONTROL GP-STEERING
S/N 4LN1-UP; 5KN1-UP
PART OF 122-5920 CAB AR
Type 2
AN ATTACHMENT
i00485640 KEBP0136
1216699 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-9787 Y [1] PUMP GP-METERING (HMU)  
2. 120-9768 [1] STEERING COLUMN  
3. 131-2189 [1] CLAMP  
4. 032-1557 [1] STEERING WHEEL  
5. 125-4598 C [1] MOUNT AS  
6. 125-2746 C [2] MOUNT  
7. 1V-9385 [1] COVER-EMBLEM  
8. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
9. 8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
11. 8T-4908 CM [4] BOLT (M8X1.25X25-MM)  
12. 6V-9189 CM [4] LOCKNUT (M8X1.25-THD)  
13. 8T-4224 C [4] WASHER-HARD (8.8X16X2-MM THK)  
14. 077-6165 [1] NUT (13/16-20-THD)  
15. 3K-0360 [4] SEAL-O-RING  
16. 6V-8639 [4] CONNECTOR  
17. 6V-8398 C [4] SEAL-O-RING  
18. 3J-7354 [1] SEAL-O-RING  
19. 6V-8647 C [1] CONNECTOR  
20. 4J-5477 [1] SEAL-O-RING  
21. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
22. 7X-0288 [4] BOLT (3/8-16X1.625-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01360506
 

125-0663: CONTROL GP-STEERING

125-0663 CONTROL GP-STEERING
S/N 4LN383-389; 4LN418-420; 4LN436-438; 4LN441-442; 4LN444-466; 4LN469-470; 4LN483-485; 5KN190-190; 5KN193-195; 5KN200-208; 5KN211-212; 5KN216-217
PART OF 125-9547 CAB AR, 125-2652 OPERATOR AR
ALSO AN ATTACHMENT
i00520260 KEBP0136
1250663 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-9787 Y [1] PUMP GP-METERING (HMU)  
2. 120-9768 [1] STEERING COLUMN  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 3J-7354 [1] SEAL-O-RING  
5. 032-1557 [1] STEERING WHEEL  
6. 077-6165 [1] NUT (13/16-20-THD)  
7. 1V-9385 [1] COVER-EMBLEM  
8. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
9. 3K-0360 [4] SEAL-O-RING  
  6V-8398 [4] SEAL-O-RING  
10. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
  8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
  8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
11. 6V-9002 [1] ELBOW  
12. 6V-9189 M [4] LOCKNUT (M8X1.25-THD)  
13. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
14. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
16. 6V-8639 [3] CONNECTOR  
17. 121-0457 [1] CLAMP  
18. 125-4598 [1] MOUNT AS  
19. 6V-8647 [1] CONNECTOR  
20. 4J-5477 [1] SEAL-O-RING  
21. 125-2746 [2] MOUNT  
22. 7X-0288 [4] BOLT (3/8-16X1.625-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01360507
 

125-0663: CONTROL GP-STEERING

125-0663 CONTROL GP-STEERING
S/N 4LN467-468; 4LN471-482; 4LN486-UP; 5KN213-215; 5KN218-UP
PART OF 125-9547, 172-5054 CAB AR, 125-2652 OPERATOR AR
ALSO AN ATTACHMENT
i00520262 KEBP0136
1250663 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-9787 Y [1] PUMP GP-METERING (HMU)  
2. 120-9768 [1] STEERING COLUMN  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 3J-7354 [1] SEAL-O-RING  
5. 032-1557 [1] STEERING WHEEL  
6. 077-6165 [1] NUT (13/16-20-THD)  
7. 1V-9385 [1] COVER-EMBLEM  
8. 9K-5635 [3] SCREW-TAPPING (8-18X1-IN)  
9. 3K-0360 [4] SEAL-O-RING  
  6V-8398 [4] SEAL-O-RING  
10. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
11. 6V-9002 [1] ELBOW  
12. 6V-9189 M [4] LOCKNUT (M8X1.25-THD)  
13. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
14. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
16. 6V-8639 [3] CONNECTOR  
17. 131-2189 C [1] CLAMP  
18. 125-4598 [1] MOUNT AS  
19. 6V-8647 [1] CONNECTOR  
20. 4J-5477 [1] SEAL-O-RING  
21. 125-2746 [2] MOUNT  
22. 7X-0288 [4] BOLT (3/8-16X1.625-IN)  
23. 131-2186 C [1] PLATE AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01360508
 

086-9528: CYLINDER & MTG GP-TILT

086-9528 CYLINDER & MTG GP-TILT
S/N 4LN1-382; 4LN390-417; 4LN421-435; 4LN439-440; 4LN443-443; 5KN1-192; 5KN196-199; 5KN209-210
PART OF 122-5920, 125-9547 CAB AR
AN ATTACHMENT
i00462067 KEBP0136
0869528 CYLINDER & MTG GP-TILT Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5E-5069 [1] SUPPORT AS  
2. 082-7014 [2] BOLT  
3. 5P-8246 [2] WASHER-HARD (15.5X29X3-MM THK)  
4. 6R-1992 [2] LOCKNUT  
5. 172-6181 [1] KIT-CYLINDER  
6. 082-6396 Y [1] PUMP GP-CAB TILT  
7. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
8. 8T-4224 C [7] WASHER-HARD (8.8X16X2-MM THK)  
9. 8C-6857 C [1] BOLT (3/4-10X2.75-IN)  
10. 7X-0370 C [1] BOLT (3/4-10X3.5-IN)  
11. 3E-9862 C [2] LOCKNUT (3/4-10-THD)  
12. 6R-1539 [1] HOLDER  
13. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
14. 081-3119 [2] SEAL-RUBBER  
15. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
16. 6R-0934 [1] COVER (CAB PUMP)  
17. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
18. 081-3696 [2] ADAPTER  
19. 081-5113 [2] HOSE  
20. 5C-7261 M [2] NUT (M8X1.25-THD)  
21. 8T-9371 C [1] BOLT (3/8-16X0.5-IN)  
22. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
23. 6D-3479 [1] CLIP  
24. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 3K-6060 C [1] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01360509
 

132-8896: CYLINDER & MTG GP-TILT

132-8896 CYLINDER & MTG GP-TILT
S/N 4LN1-UP; 5KN1-UP
PART OF 122-5920, 125-9547, 172-5054 CAB AR
AN ATTACHMENT
i00555425 KEBP0136
1328896 CYLINDER & MTG GP-TILT Parts scheme
  For full view, you need register

Parts for your CS-563C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-4119 [1] CYLINDER AS-TILT  
2. 128-4120 [1] PUMP AS-HAND  
3. 131-1533 [1] PLATE  
4. 137-1321 I [2] HOSE AS  
5. 081-3772 [1] LEVER  
6. 081-5382 [2] CLAMP  
7. 7X-0492 [2] ELBOW  
8. 8C-6865 [2] CONNECTOR  
9. 4J-5477 [4] SEAL-O-RING  
10. 8C-6857 [1] BOLT (3/4-10X2.75-IN)  
11. 7X-0587 [2] WASHER-HARD (17X54X3-MM THK)  
12. 3E-9862 [1] LOCKNUT (3/4-10-THD)  
13. 081-3119 [2] SEAL-RUBBER  
14. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
15. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
17. 5C-9553 M [2] BOLT (M6X1X16-MM)  
18. 112-6646 M [2] LOCKNUT (M6X1-THD)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 4S-4455 [1] CLIP  
21. 128-1624 [1] SUPPORT AS  
22. 7X-2555 M [1] BOLT (M16X2X80-MM)  
23. 8T-4132 M [2] NUT (M16X2-THD)  
24. 7X-2554 M [2] BOLT (M16X2X70-MM)  
25. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
26. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
27. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 9X-8244 M [1] LOCKNUT (M16X2-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Propel Pump Linkage Rod - Lubricate
CP-563C and CS-563C Vibratory Compactors
Special Instruction
A Process is Available to Replace the Propel Lever Group{3209, 5462}
A Process is Available to Replace the Propel Lever Group{3209, 5462}
Service Magazine
An Improved Throttle Cable Is Available For Certain Soil And Asphalt Compactors{5462}
1999/07/26
An Improved Propel Lever Group is Available for Soil Compactors {3209, 5462}
2002/05/27
Special Instruction, REHS1176, "A Process is Available to Replace the Propel Lever Group" is Available {3209, 5462}
2001/12/03
An Improved Propel Lever Group is Available for Soil Compactors {5462}
2003/07/07

Caterpillar Parts SIS Catalog CS-563C :

CONTROL GP-DIRECTION & SPEED
117-2909 CONTROL GP-DIRECTION & SPEED
CONTROL GP-BLADE
7R-3147 CONTROL GP-BLADE
CONSOLE GP-OPERATOR
152-8122 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
147-0522 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
134-3842 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
134-3842 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
134-3842 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
128-6558 CONSOLE GP-OPERATOR
CONTROL GP-HANDLE
137-1613 CONTROL GP-HANDLE
CONTROL GP-HANDLE
1G-6588 CONTROL GP-HANDLE
CONTROL GP-STEERING
101-8677 CONTROL GP-STEERING
CONTROL GP-STEERING
121-6699 CONTROL GP-STEERING
CONTROL GP-STEERING
121-6699 CONTROL GP-STEERING
CONTROL GP-STEERING
125-0663 CONTROL GP-STEERING
CONTROL GP-STEERING
125-0663 CONTROL GP-STEERING
CYLINDER & MTG GP-TILT
086-9528 CYLINDER & MTG GP-TILT

Truck sale:

Caterpillar CS-563C
 
Caterpillar CS-563C
- Single drum rollers
BLANCHARD MACHINERY CO.
Caterpillar CS563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
 
Caterpillar CS563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
- Single drum rollers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar CS-563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
28.500 
Caterpillar CS-563CAW, Walzenzüge, Bau-Und Bergbauausrüstung
- Single drum rollers
FOLEY, INC.
Caterpillar CS563CAW, Construction
28,000 
Caterpillar CS563CAW, Construction
- Single drum rollers
MACALLISTER MACHINERY CO., INC
Caterpillar CS-563C, Construction
23,000 
Caterpillar CS-563C, Construction
- Single drum rollers
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.