AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

167-1179 PUMP GP-FUEL INJECTION S/N 7BJ1-UP; 5HK65729-99999 PART OF 130-4800 ENGINE AR-PRIMARY CP-433C


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
BATTERY GP

VIBRATORY COMPACTOR CP-433C VIBRATORY COMPACTOR 2JM
 CS-433C CP-433C Vibratory Compactor 2JM00001-UP (MACHINE) POWERED BY 3054 Engine KEBP0140 CP-433C 2JM   (1994)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
114-4340 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
114-4341 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
142-5071 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
149-5459 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
167-1179 PUMP GP-FUEL INJECTION
 

#KEBP01400150
 

167-1179: PUMP GP-FUEL INJECTION

167-1179 PUMP GP-FUEL INJECTION
S/N 7BJ1-UP; 5HK65729-99999
PART OF 130-4800 ENGINE AR-PRIMARY
i01086089 KEBP0140
1671179 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 D LOCKWIRE (.1M)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 033-7625 [1] ELBOW  
4. 067-6264 [1] FITTING-FLARED  
5. 067-6265 [1] FITTING-BRASS  
6. 067-7006 [1] SEAL  
7. 101-3877 [3] STUD (M8X1.25X37-MM)  
8. 107-2348 [2] CLIP  
10. 124-3713 [1] CONNECTION  
11. 124-3714 [3] BOLT  
12. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
13. 140-8713 [2] CLIP  
14. 140-8714 [1] CLIP  
15. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
15A. 140-8716 [1] HOLDER  
15B. 140-8717 [1] NOZZLE  
16. 161-2161 [1] SEAL-O-RING  
17. 167-1180 [1] PUMP GP-FUEL INJECTION  
17A. 192-9155 [1] CONTROL AS-FUEL RATIO  
17B. 116-8648 [2] RING  
18. 140-8718 [4] WASHER  
19. 140-8719 [1] LINE-LEAKOFF  
20. 204-7853 [8] WASHER  
21. 140-8723 [1] LEAD  
22. 142-5070 [1] TUBE AS  
23. 169-5326 [1] SWITCH-TEMPERATURE  
24. 154-6016 [1] GEAR-PUMP (56-TEETH)  
25. 154-8055 [1] HOSE  
26. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
27. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
28. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
29. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP01400151
 

6I-0570: PUMP GP-FUEL TRANSFER

6I-0570 PUMP GP-FUEL TRANSFER
S/N 5HK1-57073
PART OF 100-8184 ENGINE AR
i00200187 KEBP0140
6I0570 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-3221 [1] GASKET  
2. 121-3220 [1] PUMP GP-FUEL TRANSFER  
3. 8N-0478 [2] PLATE-RETAINING  
4. 6I-0572 M [4] BOLT (M8X1.25X20-MM)  
5. 067-6268 [1] NUT-FUEL LINE  
6. 067-6269 [1] FERRULE  
   
    AVAILABLE REPAIR KIT(S):
  121-7034 [1] KIT-FUEL PUMP  
  M   METRIC PART
 

#KEBP01400152
 

101-3925: SEPARATOR GP-WATER

101-3925 SEPARATOR GP-WATER
S/N 2JM1-507; 3TM1-613
PART OF 105-7604 LINES GP-FUEL
FIELD REPLACEMENT ORDER @@@@@138-3097@@@@@
i00463304 KEBP0140
1013925 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3739 [1] NUT  
2. 101-3740 [1] CAP (FUEL FILTER)  
3. 101-3741 [1] SEAL  
4. 101-3743 [1] SEAL (FUEL FILTER)  
5. 101-3912 [1] WASHER  
6. 101-3922 [1] VALVE  
7. 101-3949 [1] SEAL  
8. 6J-2244 [1] SEAL-O-RING  
9. 101-3955 [1] SEAL  
10. 101-3958 [1] PLUG  
11. 118-5637 [1] KIT-BOWL (WATER SEPARATOR)  
11A. 101-3912 [1] WASHER  
12. 118-8118 [1] RING-RETAINING  
13. 138-3100 [1] ELEMENT-WATER SEPARATOR (PRIMARY)  
 

#KEBP01400153
 

138-3097: SEPARATOR GP-WATER

138-3097 SEPARATOR GP-WATER
S/N 2JM508-UP; 3TM614-UP
PART OF 143-4056 LINES GP-FUEL
FIELD REPLACEMENT FOR @@@@@101-3925@@@@@
i00981773 KEBP0140
1383097 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3912 [1] WASHER  
2. 101-3949 [1] SEAL  
3. 101-3953 [1] SEAL  
4. 101-3955 [1] SEAL  
5. 138-3100 [1] ELEMENT-WATER SEPARATOR (PRIMARY)  
6. 101-3739 [1] NUT  
7. 101-3740 [1] CAP  
8. 101-3741 [1] SEAL  
   
    AVAILABLE REPLACEMENT PART(S):
  118-5637 [1] KIT-BOWL (WATER SEPARATOR)  
 

#KEBP01400154
 

105-7615: TANK & MTG GP-FUEL

105-7615 TANK & MTG GP-FUEL
S/N 2JM1-499; 3TM1-588
PART OF 104-2953, 104-2954, 131-5395, 141-9141, 143-4673 CHASSIS AR
ALSO AN ATTACHMENT
i00483061 KEBP0140
1057615 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-9317 [2] STRAP AS  
2. 106-9314 [1] NECK AS-FUEL  
3. 128-6124 [1] TUBE  
4. 106-8645 [1] TANK AS-FUEL  
5. 003-2143 [2] ELBOW  
6. 051-4733 [1] GASKET-TANK UNIT  
7. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
8. 9B-1722 [5] SCREW (10-24X0.5-IN)  
9. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  5M-3062 [8] BOLT (3/8-16X0.75-IN)  
10. 129-3180 M [4] LOCKNUT (M12X1.75-THD)  
  5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
  7X-2550 M [4] BOLT (M12X1.75X110-MM)  
11. 8T-0081 [1] VALVE-BALL  
12. 8C-6867 [2] CONNECTOR  
  6V-8398 [2] SEAL-O-RING  
13. 7X-8733 [1] COVER  
14. 9S-4185 [1] PLUG (3/4-16-THD)  
15. 7T-2036 [1] CAP AS-FILLER (FUEL)  
  8P-0408 [1] CAP-FILLER (FUEL TANK)  
15A. 4B-1663 [1] FILTER ELEMENT-FUEL (FUEL CAP)  
15B. 4B-5949 [1] FILTER ELEMENT-FUEL (FUEL CAP)  
15C. 4B-5423 [1] GASKET  
15D. 3F-4134 [1] BAFFLE (FUEL TANK FILL CAP)  
15E. 7B-2002 [1] WASHER (10.2X44.5X3-MM THK)  
15F. 7T-2009 [1] VALVE AS  
15G. 7T-2037 [1] GASKET  
16. 110-7749 [1] SENDER AS-FUEL LEVEL  
17. 8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 5B-1309 [1] COUPLING-PIPE  
19. 5E-9671 [1] GASKET  
20. 5E-9698 [2] CLAMP-HOSE  
21. 5E-9746 [1] HOSE  
22. 4B-4274 [5] WASHER (5.5X13X1.2-MM THK)  
23. 3K-0360 [2] SEAL-O-RING  
  M   METRIC PART
 

#KEBP01400155
 

105-7615: TANK & MTG GP-FUEL

105-7615 TANK & MTG GP-FUEL
S/N 2JM500-UP; 3TM589-UP
PART OF 104-2953, 104-2954, 131-5395, 141-8690, 141-8691, 141-9141, 143-4673, 146-8969, 171-5852, 171-5857 CHASSIS AR
ALSO AN ATTACHMENT
i00710145 KEBP0140
1057615 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-9317 [2] STRAP AS  
2. 106-9314 [1] NECK AS-FUEL  
3. 147-4480 C [1] PIPE AS-FUEL  
4. 106-8645 [1] TANK AS-FUEL  
5. 003-9014 C [2] ELBOW  
6. 051-4733 [1] GASKET-TANK UNIT  
7. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
8. 9B-1722 [5] SCREW (10-24X0.5-IN)  
9. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 129-3180 M [4] LOCKNUT (M12X1.75-THD)  
11. 8T-0081 [1] VALVE-BALL  
12. 8C-6867 [2] CONNECTOR  
13. 8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 9S-4185 [1] PLUG (3/4-16-THD)  
15. 7T-2036 [1] CAP AS-FILLER (FUEL)  
  8P-0408 [1] CAP-FILLER (FUEL TANK)  
15A. 4B-1663 [1] FILTER ELEMENT-FUEL (FUEL CAP)  
15B. 4B-5949 [1] FILTER ELEMENT-FUEL (FUEL CAP)  
15C. 4B-5423 [1] GASKET  
15D. 3F-4134 [1] BAFFLE (FUEL TANK FILL CAP)  
15E. 7B-2002 [1] WASHER (10.2X44.5X3-MM THK)  
15F. 7T-2009 [1] VALVE AS  
15G. 7T-2037 [1] GASKET  
16. 5M-3062 [8] BOLT (3/8-16X0.75-IN)  
17. 7X-2550 M [3] BOLT (M12X1.75X110-MM)  
18. 4J-5477 [2] SEAL-O-RING  
19. 8T-5041 M [1] BOLT (M12X1.75X120-MM)  
20. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
21. 5E-9671 [1] GASKET  
22. 5E-9698 [2] CLAMP-HOSE  
23. 5E-9746 [1] HOSE  
24. 110-7749 [1] SENDER AS-FUEL LEVEL  
25. 3K-0360 [2] SEAL-O-RING  
26. 4B-4274 [5] WASHER (5.5X13X1.2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP01400156
 

112-5053: ALTERNATOR GP-CHARGING

112-5053 ALTERNATOR GP-CHARGING
S/N 2JM1-499; 3TM1-577
PART OF 104-2952 INSTALLATION AR-ENGINE
i00490670 KEBP0140
1125053 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3043 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 52-AMPERE)  
2. 103-7287 [1] BRACKET  
3. 7C-5567 [1] PULLEY  
4. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
5. 3P-0011 [1] SPACER (0.44X0.75X0.36-IN THK)  
6. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
7. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
8. 8T-5436 M [1] BOLT (M10X1.5X130-MM)  
9. 7C-5583 [1] SPACER  
10. 3S-8447 [1] V-BELT SET (INCLUDES 2-BELTS)  
11. 113-7901 [1] GUARD AS-ALTERNATOR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400157
 

142-2612: ALTERNATOR GP-CHARGING

142-2612 ALTERNATOR GP-CHARGING
S/N 2JM500-UP; 3TM578-UP
PART OF 104-2952, 140-3688 INSTALLATION AR-ENGINE
i00565947 KEBP0140
1422612 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-8447 [1] V-BELT SET (INCLUDES 2-BELTS)  
    (INCLUDES 2 BELTS)
2. 142-1812 [1] BRACKET AS  
3. 142-1811 [1] STRAP  
4. 9W-3043 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 52-AMPERE)  
5. 7C-5567 [1] PULLEY  
6. 7C-9465 [1] SPACER (11.1X14.3X20-MM THK)  
7. 4K-5824 [1] BOSS  
8. 113-4339 [1] SPACER (10.5X18X21-MM THK)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
11. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
12. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
13. 8T-5436 M [1] BOLT (M10X1.5X130-MM)  
14. 8T-4177 M [1] BOLT (M8X1.25X90-MM)  
15. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
16. 142-2611 [1] GUARD AS-ALTERNATOR  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400158
 

9W-3043: ALTERNATOR GP-CHARGING

9W-3043 ALTERNATOR GP-CHARGING
S/N 2JM1-UP; 3TM1-UP
24-VOLT, 52-AMPERE
PART OF 112-5053, 142-2612 ALTERNATOR GP-CHARGING
i00170980 KEBP0140
9W3043 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-1434 [2] LOCKWASHER  
2. 8C-6141 [1] PLATE-SUPPORT  
3. 9W-1904 [1] FAN (12-BLADE)  
4. 9W-1901 M [4] SCREW (M5X0.8X96-MM)  
5. 8C-6149 [1] FRAME AS  
6. 2P-8099 [1] BALL BEARING  
7. 9W-1794 [1] COVER  
8. 8C-6146 [1] ROTOR  
9. 1H-3244 [1] LOCKWASHER  
10. 9W-1793 [1] BEARING  
11. 8C-6147 [1] STATOR  
12. 6V-9492 M [2] SCREW-MACHINE (M4X0.7X25-MM)  
13. 8C-6144 [1] RECTIFIER  
14. 8C-6148 [1] FRAME AS  
15. 6V-5210 M [2] SCREW-MACHINE (M4X0.7X10-MM)  
16. 096-6166 [5] WASHER-HARD (4.5X9X1-MM THK)  
17. 105-2063 [1] REGULATOR AS-ALTERNATOR (24-VOLT)  
18. 9B-7233 [1] LOCKWASHER  
19. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 5C-2890 M [2] NUT (M6X1-THD)  
21. 5C-2874 M [1] NUT (M5X0.8-THD)  
22. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
23. 5C-7261 M [1] NUT (M8X1.25-THD)  
24. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
25. 5C-8312 M [1] NUT (M4X0.7-THD)  
26. 6V-9673 M [1] SCREW-MACHINE (M5X0.8X12-MM)  
27. 9W-1900 [1] CAPACITOR  
28. 8C-6143 [1] GASKET  
29. 8C-6142 [1] RING-FITTING  
   
    AVAILABLE REPAIR KIT(S):
  9W-1912 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES SPACERS, LOCKWASHERS, NUTS, SCREWS & KEY)
  8C-6150 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES NUTS, WASHERS, INSULATORS, BUSHING, STUD & CAP)
  M   METRIC PART
 

#KEBP01400159
 

105-7631: BATTERY & WIRING GP

105-7631 BATTERY & WIRING GP
S/N 2JM1-UP; 3TM1-UP
PART OF 104-2956, 141-8687, 141-9383, 143-4668 ELECTRICAL AR
ALSO AN ATTACHMENT
i00483222 KEBP0140
1057631 BATTERY & WIRING GP Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-5760 [2] BATTERY GP (12-VOLT, 750-CCA)  
2. 9R-5685 [2] HOLDER AS  
3. 7L-7524 [4] BOLT (3/8-16X10.25-IN)  
4. 8T-2561 [4] WASHER-HARD (10.5X28.5X5-MM THK)  
5. 8N-0869 [1] COVER-TERMINAL (RED)  
6. 8H-8648 [1] PLATE-INSTRUCTION (DISCONNECT SWITCH)  
7. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
8. 038-9317 [2] TREAD-NONSKID  
9. 9M-8406 [10] CLIP (LOOP)  
10. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 5Y-1423 [1] CABLE AS  
12. 4L-6454 [1] BOLT (3/8-16X1-IN)  
13. 4M-7146 [1] STRAP AS-GROUND  
14. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
15. 3K-6060 [4] LOCKNUT (3/8-16-THD)  
16. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 108-1032 [1] STRAP-GROUNDING  
18. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
19. 7N-0718 Y [1] SWITCH GP-DISCONNECT (BATTERY)  
20. 3P-2179 [1] CABLE AS (FROM NEG POST OF FRONT)  
  5P-0747 E CABLE (00-GA, BLACK)(15CM)  
20A. 9G-0004 [1] COVER AS-TERMINAL (RED)  
  8C-5917 [1] TERMINAL AS-BATTERY (POSITIVE)  
20B. 1M-6119 [2] BOLT (5/16-18X1.375-IN)  
  1M-6120 [2] NUT (5/16-18-THD)  
20C. 9G-0003 [1] COVER AS-TERMINAL (BLACK)  
  8T-9757 [1] TERMINAL AS-BATTERY (NEGATIVE)  
21. 3K-4922 [1] CABLE AS (FROM NEG POST OF REAR)  
  5P-0747 E CABLE (00-GA, BLACK)(193CM)  
21A. 7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
21B. 1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
22. 8V-2441 [1] CABLE AS (FROM POS POST OF FRONT)  
  5P-0747 E CABLE (00-GA, BLACK)(155CM)  
22A. 8N-1725 [1] COVER AS-TERMINAL (RED)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6120 [1] NUT (5/16-18-THD)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
22B. 1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Engine Valve Lash and Injector Fuel Timing - Check/Adjust
CP-433C, CS-431C and CS-433C Paving Compactors
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines
Possible Fuel Leak From The Weep Hole In Stanadyne Model DB4 Fuel Injection Pumps On 3054 and 3056 Engines
Specifications
Fuel Injection Pump
3054 Engine
Fuel Injection Nozzles
3054 Engine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 Engine
Disassembly and Assembly
Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Service Magazine
3054 And 3056 Machine Engine Fuel Injection Pump Service{1251}
1994/11/21
Fuel System Component Information{1254}
1996/01/22
Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/10/21
Improved Fuel Lift Pump For 3054 Engines {1250,1256,1258}
1998/06/08
Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/09
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Support for Fuel Injection Pumps {1251}
2008/07/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog CP-433C :

PUMP GP-FUEL INJECTION
149-5459 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
142-5071 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
114-4341 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
114-4340 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
114-4336 LINES GP-FUEL INJECTION
LINES GP-FUEL FILTER
101-3900 LINES GP-FUEL FILTER
LINES GP-FUEL
143-4056 LINES GP-FUEL
LINES GP-FUEL
105-7604 LINES GP-FUEL
PUMP GP-FUEL TRANSFER
6I-0570 PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER
101-3925 SEPARATOR GP-WATER
SEPARATOR GP-WATER
138-3097 SEPARATOR GP-WATER
TANK & MTG GP-FUEL
105-7615 TANK & MTG GP-FUEL
TANK & MTG GP-FUEL
105-7615 TANK & MTG GP-FUEL
ALTERNATOR GP-CHARGING
112-5053 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
142-2612 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
9W-3043 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar CP-433C, Construction
42,500 
Caterpillar CP-433C, Construction
- Single drum rollers
GREGORY POOLE EQUIPMENT CO.
CATERPILLAR CP-433C 2000
 
CATERPILLAR CP-433C 2000
- VIBRATORY SINGLE DRUM PAD
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR CP-433C 1999
 
CATERPILLAR CP-433C 1999
- COMPACTORS
BUTLER MACHINERY CO
3401 33rd St SW - Fargo - North Dakota
 
 
CAT CP-433C

Don Smock Auction Co.
Pendleton, Indiana 46064
1997 CAT CP-433C
USD $49,900 
1997 CAT CP-433C

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.