AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

109-5915 VALVE GP-FLUSHING S/N 2JM1-UP; 3TM1-UP PART OF 105-7649 VALVE & MTG GP-FLUSHING ALSO AN ATTACHMENT CP-433C


HYDRAULIC SYSTEM
VALVE GP-FLUSHING
VALVE GP-SOLENOID
WORK TOOLS
BLADE GP

VIBRATORY COMPACTOR CP-433C VIBRATORY COMPACTOR 2JM
 CS-433C CP-433C Vibratory Compactor 2JM00001-UP (MACHINE) POWERED BY 3054 Engine KEBP0140 CP-433C 2JM   (1994)

HYDRAULIC SYSTEM

VALVE GP-FLUSHING
VALVE & MTG GP-FLUSHING
105-7649 VALVE & MTG GP-FLUSHING
VALVE & MTG GP-FLUSHING
105-7649 VALVE & MTG GP-FLUSHING
VALVE GP-FLUSHING
109-5915 VALVE GP-FLUSHING
 

#KEBP01400410
 

109-5915: VALVE GP-FLUSHING

109-5915 VALVE GP-FLUSHING
S/N 2JM1-UP; 3TM1-UP
PART OF 105-7649 VALVE & MTG GP-FLUSHING
ALSO AN ATTACHMENT
i00491461 KEBP0140
1095915 VALVE GP-FLUSHING Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8004 [2] PLUG (9/16-18-THD)  
2. 3J-1907 [2] SEAL-O-RING  
3. 118-7919 [2] PLUG-ORIFICE  
4. 082-2789 [1] VALVE (CHARGE RELIEF)  
5. 102-4151 [1] VALVE GP-SHUTTLE  
6. 7R-3580 [1] KIT-SEAL  
7. 118-8197 [1] KIT-VALVE REPAIR  
 

#KEBP01400411
 

109-5919: VALVE GP-SOLENOID

109-5919 VALVE GP-SOLENOID
S/N 2JM1-UP; 3TM1-UP
PART OF 105-7650 VALVE GP-PROPEL
ALSO AN ATTACHMENT
i00491465 KEBP0140
1095919 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
3. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 112-6545 Y [1] VALVE GP-SOLENOID (PROPEL)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400412
 

112-6545: VALVE GP-SOLENOID

112-6545 VALVE GP-SOLENOID
S/N 2JM1-UP; 3TM1-UP
PART OF 109-5919 VALVE GP-SOLENOID
ALSO AN ATTACHMENT
i00492505 KEBP0140
1126545 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-9180 [1] KIT-SOLENOID  
 

#KEBP01400413
 

178-8446: BLADE AR

178-8446 BLADE AR
S/N 3TM1-UP
AN ATTACHMENT
i01225479 KEBP0140
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  178-8090 Y [1] BLADE GP  
  178-9144 Y [1] BUMPER GP-DRUM  
  174-1479 Y [1] LINES GP-CONTROL  
  112-3074 Y [1] VALVE & MTG GP-BLADE  
  174-1481 [1] YOKE AS-BLADE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400414
 

178-8447: BLADE AR

178-8447 BLADE AR
S/N 2JM1-UP
AN ATTACHMENT
i01225549 KEBP0140
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  178-8090 Y [1] BLADE GP  
  180-0632 Y [1] BUMPER GP-DRUM  
  174-1479 Y [1] LINES GP-CONTROL  
  112-3074 Y [1] VALVE & MTG GP-BLADE  
  174-1481 [1] YOKE AS-BLADE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400415
 

175-2269: BLADE GP

175-2269 BLADE GP
S/N 2JM1-UP
AN ATTACHMENT
i01226586 KEBP0140
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  172-7949 Y [1] BLADE GP-LEVELING  
  175-0397 Y [1] BUMPER GP-DRUM  
  174-1479 Y [1] LINES GP-CONTROL  
  112-3074 Y [1] VALVE & MTG GP-BLADE  
  174-1481 [1] YOKE AS-BLADE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400416
 

178-8090: BLADE GP

178-8090 BLADE GP
S/N 2JM1-UP; 3TM1-UP
PART OF 178-8446, 178-8447 BLADE AR, 189-6234, 189-6235 BLADE GP-LEVELING
AN ATTACHMENT
i01226711 KEBP0140
1788090 BLADE GP Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-5997 [2] LOCKNUT (1-1/4-7-THD)  
2. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
3. 3E-9861 [18] LOCKNUT (5/8-11-THD)  
4. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
5. 7X-5689 [2] PLATE-WEAR  
6. 8G-4189 [2] BEARING-SELF-ALIGNING  
7. 9X-6496 [4] RING-RETAINING  
8. 077-5470 [1] BUSHING-TERMINAL  
9. 187-6276 [4] SPACER  
10. 120-8678 [4] WASHER (25.5X85X12-MM THK)  
11. 9F-2247 [1] PLUG-PIPE  
12. 138-2274 Y [1] CYLINDER GP-HYDRAULIC  
13. 171-8660 [2] PIN  
14. 172-9298 [2] EDGE-CUTTING  
15. 178-8088 [1] BLADE AS  
16. 7X-0429 [1] BOLT (1-1/4-7X4.5-IN)  
17. 7X-0436 [1] BOLT (1-1/4-7X9-IN)  
18. 7X-0533 [4] WASHER-HARD (34X55X6-MM THK)  
19. 7X-2567 M [2] BOLT (M24X3X160-MM)  
20. 6V-7676 M [2] NUT (M24X3-THD)  
21. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400417
 

111-8830: BLADE GP-LEVELING

111-8830 BLADE GP-LEVELING
S/N 2JM1-271; 3TM1-291
PART OF 112-3203, 112-3300 BLADE GP-LEVELING
AN ATTACHMENT
i00484764 KEBP0140
1118830 BLADE GP-LEVELING Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-4416 [1] BLADE AS  
2. 8G-4189 [2] BEARING-SELF-ALIGNING  
3. 111-0279 [4] SPACER  
4. 9X-6496 [4] RING-RETAINING  
5. 111-0280 [2] BUSHING  
6. 7X-2584 M [2] BOLT (M30X3.5X140-MM)  
7. 7X-5677 [4] WASHER  
8. 8C-8722 M [2] NUT (M30X3.5-THD)  
9. 111-0276 [2] PLATE  
10. 111-0278 [2] BAR  
11. 111-0277 [2] PLATE  
12. 111-0574 B [4] SHIM  
13. 8T-4170 M [3] BOLT (M20X2.5X150-MM)  
14. 8T-4123 [12] WASHER (3.62X5.75X0.375-MM THK)  
15. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
16. 109-7011 Y [1] CYLINDER GP-HYDRAULIC  
17. 7X-0436 [1] BOLT (1-1/4-7X9-IN)  
18. 7X-0533 [4] WASHER-HARD (34X55X6-MM THK)  
19. 2J-5997 [2] LOCKNUT (1-1/4-7-THD)  
20. 7X-0429 [1] BOLT (1-1/4-7X4.5-IN)  
21. 077-5470 [1] BUSHING-TERMINAL  
22. 102-6745 [1] EDGE-CUTTING (MID-SECTION)  
23. 109-4426 [2] EDGE-CUTTING  
24. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
25. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
26. 3K-2889 [18] LOCKNUT (5/8-11-THD)  
27. 7X-5689 [2] PLATE-WEAR  
28. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
29. 9F-2247 [1] PLUG-PIPE  
30. 8C-8478 M [3] BOLT (M20X2.5X140-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400418
 

111-8830: BLADE GP-LEVELING

111-8830 BLADE GP-LEVELING
S/N 2JM272-382; 3TM292-440
PART OF 112-3203, 112-3300 BLADE GP-LEVELING
AN ATTACHMENT
i00484796 KEBP0140
1118830 BLADE GP-LEVELING Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-4416 [1] BLADE AS  
2. 8G-4189 [2] BEARING-SELF-ALIGNING  
3. 111-0279 [4] SPACER  
4. 9X-6496 [4] RING-RETAINING  
5. 111-0280 [2] BUSHING  
6. 7X-2584 M [2] BOLT (M30X3.5X140-MM)  
7. 7X-5677 [4] WASHER  
8. 8C-8722 M [2] NUT (M30X3.5-THD)  
9. 111-0276 [2] PLATE  
10. 111-0278 [2] BAR  
11. 111-0277 [2] PLATE  
12. 111-0574 B [4] SHIM  
13. 8T-4170 M [3] BOLT (M20X2.5X150-MM)  
14. 8T-4123 [12] WASHER (3.62X5.75X0.375-MM THK)  
15. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
16. 134-1850 CY [1] CYLINDER GP-HYDRAULIC  
17. 7X-0436 [1] BOLT (1-1/4-7X9-IN)  
18. 7X-0533 [4] WASHER-HARD (34X55X6-MM THK)  
19. 2J-5997 [2] LOCKNUT (1-1/4-7-THD)  
20. 7X-0429 [1] BOLT (1-1/4-7X4.5-IN)  
21. 077-5470 [1] BUSHING-TERMINAL  
22. 102-6745 [1] EDGE-CUTTING (MID-SECTION)  
23. 109-4426 [2] EDGE-CUTTING  
24. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
25. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
26. 3E-9861 C [18] LOCKNUT (5/8-11-THD)  
27. 7X-5689 [2] PLATE-WEAR  
28. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
29. 9F-2247 [1] PLUG-PIPE  
30. 8C-8478 M [3] BOLT (M20X2.5X140-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01400419
 

111-8830: BLADE GP-LEVELING

111-8830 BLADE GP-LEVELING
S/N 2JM383-UP; 3TM441-UP
PART OF 112-3203, 112-3300, 162-7124 BLADE GP-LEVELING
AN ATTACHMENT
i00561062 KEBP0140
1118830 BLADE GP-LEVELING Parts scheme
  For full view, you need register

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-4416 [1] BLADE AS  
2. 8G-4189 [2] BEARING-SELF-ALIGNING  
3. 111-0279 [4] SPACER  
4. 9X-6496 [4] RING-RETAINING  
5. 111-0280 [2] BUSHING  
6. 7X-2584 M [2] BOLT (M30X3.5X140-MM)  
7. 7X-5677 [4] WASHER  
8. 8C-8722 M [2] NUT (M30X3.5-THD)  
9. 111-0276 [2] PLATE  
10. 111-0278 [2] BAR  
11. 111-0277 [2] PLATE  
12. 111-0574 B [4] SHIM  
13. 8T-4170 M [3] BOLT (M20X2.5X150-MM)  
14. 8T-4123 [12] WASHER (3.62X5.75X0.375-MM THK)  
15. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
16. 138-2274 CY [1] CYLINDER GP-HYDRAULIC  
17. 7X-0436 [1] BOLT (1-1/4-7X9-IN)  
18. 7X-0533 [4] WASHER-HARD (34X55X6-MM THK)  
19. 2J-5997 [2] LOCKNUT (1-1/4-7-THD)  
20. 7X-0429 [1] BOLT (1-1/4-7X4.5-IN)  
21. 077-5470 [1] BUSHING-TERMINAL  
22. 102-6745 [1] EDGE-CUTTING (MID-SECTION)  
23. 109-4426 [2] EDGE-CUTTING  
24. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
25. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
26. 3E-9861 [18] LOCKNUT (5/8-11-THD)  
27. 7X-5689 [2] PLATE-WEAR  
28. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
29. 9F-2247 [1] PLUG-PIPE  
30. 8C-8478 M [3] BOLT (M20X2.5X140-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Drum Propel Motor
CP-433C & CS433C VIBRATORY COMPACTORS PROPEL SYSTEM
Flushing Valve
CP-433C & CS433C VIBRATORY COMPACTORS PROPEL SYSTEM
Vibratory Flushing Valve
CP-433C & CS-433C VIBRATORY COMPACTORS VIBRATORY SYSTEM
Flushing Valve
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System
Flushing Valve
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System
Systems Operation
Flushing Valve
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System
Service Magazine
New Vibratory Pump And Higher Efficiency Motor Improves Compactor Performance{5070,5058,5651,5652}
1999/06/01

Caterpillar Parts SIS Catalog CP-433C :

VALVE & MTG GP-FLUSHING
105-7649 VALVE & MTG GP-FLUSHING
VALVE & MTG GP-FLUSHING
105-7649 VALVE & MTG GP-FLUSHING
VALVE & MTG GP-BYPASS
111-8274 VALVE & MTG GP-BYPASS
VALVE & MTG GP-BLADE
112-3074 VALVE & MTG GP-BLADE
VALVE & MTG GP-BLADE
112-3074 VALVE & MTG GP-BLADE
TANK & MTG GP-HYDRAULIC
141-9959 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
141-6964 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
137-4190 TANK & MTG GP-HYDRAULIC
VALVE GP-SOLENOID
109-5919 VALVE GP-SOLENOID
VALVE GP-SOLENOID
112-6545 VALVE GP-SOLENOID
178-8446 BLADE AR
178-8447 BLADE AR
175-2269 BLADE GP
BLADE GP
178-8090 BLADE GP
BLADE GP-LEVELING
111-8830 BLADE GP-LEVELING
BLADE GP-LEVELING
111-8830 BLADE GP-LEVELING

Truck sale:

Caterpillar CP-433C, Construction
42,500 
Caterpillar CP-433C, Construction
- Single drum rollers
GREGORY POOLE EQUIPMENT CO.
CATERPILLAR CP-433C 2000
 
CATERPILLAR CP-433C 2000
- VIBRATORY SINGLE DRUM PAD
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR CP-433C 1999
 
CATERPILLAR CP-433C 1999
- COMPACTORS
BUTLER MACHINERY CO
3401 33rd St SW - Fargo - North Dakota
 
 
CAT CP-433C

Don Smock Auction Co.
Pendleton, Indiana 46064
1997 CAT CP-433C
USD $49,900 
1997 CAT CP-433C

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.