122-0594 PUMP GP-PISTON S/N 1ZN1-UP; 2TN1-UP PART OF 122-0593 PUMP & MTG GP-VIBRATORY AN ATTACHMENT CP-433C

122-0594: PUMP GP-PISTON

122-0594 PUMP GP-PISTON
S/N 1ZN1-UP; 2TN1-UP
PART OF 122-0593 PUMP & MTG GP-VIBRATORY
AN ATTACHMENT

Parts for your CP-433C VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	122-0595 Y	[1]	PUMP GP-PISTON
2.	102-8809	[1]	KIT-CONNECTING PLUG (4-PIN)
3.	3E-3374	[1]	WEDGE-PLUG LOCK (4-PIN)
4.	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

122-0595: PUMP GP-PISTON

PUMP GP-PISTON

122-0595 PUMP GP-PISTON
S/N 1ZN1-UP; 2TN1-UP
PART OF 122-0594 PUMP GP-PISTON
AN ATTACHMENT

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-8297	[2]	KIT-VALVE
2.	117-6507	[1]	VALVE-RELIEF
3.	030-4008	[1]	SPRING
4.	077-3775 BE	[1]	SHIM
5.	2M-9780 P	[1]	SEAL-O-RING
6.	7X-5462	[1]	PLUG
7.	1H-1023 P	[1]	SEAL-O-RING
8.	7X-5454 P	[1]	RING-BACKUP
9.	7X-9365	[1]	VALVE-BYPASS
10.	9S-4181	[1]	PLUG (1-5/16-12-THD)
11.	7M-8485 N	[1]	SEAL-O-RING
12.	9S-4183	[2]	PLUG (1-1/16-12-THD)
13.	3D-2824 P	[2]	SEAL-O-RING
14.	9S-4182	[1]	PLUG (7/16-20-THD)
15.	3J-7354	[1]	SEAL-O-RING
16.	119-9304	[2]	PLUG-ORIFICE
17.	5B-9079	[1]	NUT-JAM (3/8-24-THD)
18.	6V-8183	[1]	NUT-FULL (3/8-24-THD)
19.	0S-1594	[1]	BOLT (3/8-16X1-IN)
20.	7X-5446	[1]	RING-RETAINING
21.	7X-5445	[1]	GUIDE
22.	117-8296	[1]	STOP-SERVO
23.	7X-5443	[1]	SPRING
24.	7X-5441	[1]	GUIDE
25.	7X-5444	[1]	BOLT
26.	1G-8494	[10]	BOLT (1/4-20X1.125-IN)
27.	9S-4191	[4]	PLUG (9/16-18-THD)
28.	3J-1907	[4]	SEAL-O-RING
29.	7R-5517	[1]	BRACKET-LIFTING
30.	7X-5439	[1]	COVER
31.	7X-5496 P	[1]	COVER-FRONT
32.	7X-5858	[1]	COVER
33.	4L-7711 JP	[2]	SEAL-O-RING
34.	108-1753 P	[2]	BEARING
35.	7X-5450	[1]	PISTON-SERVO
36.	117-8300	[3]	COVER-PUMP
37.	034-4288	[1]	BOLT-12 POINT HEAD (3/8-16X1.125-IN)
38.	5E-8763	[2]	BEARING-ROLLER
39.	1J-6474	[1]	RING-RETAINING (EXTERNAL)
40.	2H-5549	[2]	RING-RETAINING
41.	7X-5433 P	[1]	SEAL-LIP TYPE
42.	5P-2547	[6]	BOLT-12 POINT HEAD (7/16-14X1-IN)
43.	124-8343	[2]	BEARING-JOURNAL
44.	8L-6565	[2]	PIN-SPRING
45.	7X-5484 N	[1]	PIN
46.	7X-5485	[1]	BUSHING
47.	138-9753 N	[1]	PIN-SLOTTED
48.	125-9638	[1]	SHAFT-PUMP
49.	1G-5974 L	[7]	PISTON
50.	1G-5975 L	[1]	GUIDE
51.	7X-5477 L	[7]	GUIDE-RETAINER
52.	7X-5473 L	[1]	RETAINER
53.	7X-5474 L	[3]	PIN
54.	7X-5497 L	[1]	CYLINDER BLOCK
55.	7X-5472 L	[1]	WASHER (31.2X40.3X2.7-MM THK)
56.	7X-5471 L	[1]	SPRING
57.	7X-5470 L	[1]	WASHER-SPECIAL
58.	7X-5469 L	[1]	RING-RETAINING
59.	1G-5977	[1]	SEAL-O-RING
60.	117-8295	[1]	PLATE-VALVE
61.	7X-5489	[1]	PIN
62.	7X-5468	[1]	BEARING AS-NEEDLE
63.	7X-5486 P	[1]	GASKET
64.	7X-5478	[1]	PIN-SPRING
65.	7X-5440	[1]	COVER
66.	7X-5466	[2]	NUT
67.	8C-3098	[1]	SEAL-O-RING
68.	4K-2039	[2]	SEAL-O-RING
69.	135-4917 Y	[1]	CONTROL GP-PUMP ELECTRONIC
70.	8H-3127	[2]	BOLT (1/4-20X0.75-IN)
71.	6H-3958	[2]	BOLT-SOCKET HEAD (1/4-20X2.5-IN)
72.	4M-6425	[3]	BOLT (5/16-18X1-IN)
73.	1G-9411	[1]	ADAPTER
74.	087-1102	[1]	PLUG-ORIFICE
75.	7X-5856	[1]	RING
76.	ZJ	[2]	RING PISTON
77.	ZN	[1]	SWASHPLATE

			AVAILABLE REPAIR KIT(S):
	7X-5448	[1]	KIT-PISTON RING
			(INCL PARTS MARKED J)
	7X-5866	[1]	KIT-CYLINDER BLOCK (PROPEL MOTOR)
			(INCL PARTS MARKED L)
	7X-5431	[1]	KIT-SWASHPLATE
			(INCL PARTS MARKED N)
	1G-5976	[1]	KIT-SEAL
			(INCL PARTS MARKED P)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J
	L
	N
	P
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

145-3623: PUMP GP-PISTON

PUMP GP-PISTON

145-3623 PUMP GP-PISTON
S/N 1ZN1-UP; 2TN1-UP
PART OF 105-7646, 152-3590 PUMP & MTG GP-PROPEL

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-0947	[2]	BOLT (1/2-13X2.25-IN)
2.	7X-9294	[1]	COVER
3.	7X-9372	[1]	SEAL-O-RING
4.	125-4659	[12]	BOLT
5.	2H-5549	[3]	RING-RETAINING
6.	8H-9789	[2]	BALL BEARING
7.	125-4660	[2]	BOLT-TORQUE HEAD
8.	1J-6474	[3]	RING-RETAINING (EXTERNAL)
9.	115-2160	[1]	FLANGE
10.	7X-5486 J	[2]	GASKET
11.	124-8343	[4]	BEARING-JOURNAL
12.	124-8349	[4]	PIN
13.	7X-5485	[2]	BUSHING
14.	7X-5484 N	[2]	PIN
15.	138-9753 N	[2]	PIN-SLOTTED
16.	NZ	[2]	SWASHPLATE
17.	1G-5974 H	[14]	PISTON
18.	1G-5975 H	[2]	GUIDE
19.	7X-5477 H	[2]	GUIDE-RETAINER
20.	7X-5474 H	[6]	PIN
21.	7X-5473 H	[2]	RETAINER
22.	7X-9373	[1]	SEAL-O-RING
23.	7X-5497 H	[2]	CYLINDER BLOCK
24.	7X-5472 H	[2]	WASHER (31.2X40.3X2.7-MM THK)
25.	7X-5471 H	[2]	SPRING
26.	7X-5470 H	[2]	WASHER-SPECIAL
27.	7X-5469 H	[2]	RING-RETAINING
28.	109-2981	[1]	PLATE-VALVE
29.	7X-5489	[2]	PIN
30.	115-2159	[1]	SHAFT-PUMP
31.	7X-5468	[2]	BEARING AS-NEEDLE
32.	5B-9079	[2]	NUT-JAM (3/8-24-THD)
33.	3S-2713	[2]	NUT-FULL (3/8-24-THD)
34.	7X-5446	[2]	RING-RETAINING
35.	7X-5445	[2]	GUIDE
36.	7X-5442	[2]	STOP
37.	7X-5443	[2]	SPRING
38.	7X-5441	[2]	GUIDE
39.	7X-5444	[2]	BOLT
40.	JPZ	[4]	RING-PISTON
41.	4L-7711 JP	[4]	SEAL-O-RING
42.	108-1753 J	[4]	BEARING
43.	7X-5450	[2]	PISTON-SERVO
44.	7X-5439	[2]	COVER
45.	9S-4191	[8]	PLUG (9/16-18-THD)
46.	1G-8494	[20]	BOLT (1/4-20X1.125-IN)
47.	SZ	[4]	PLUG
48.	3D-2824 JS	[4]	SEAL-O-RING
49.	3J-1907	[7]	SEAL-O-RING
50.	9S-8004	[3]	PLUG (9/16-18-THD)
51.	9S-4182	[2]	PLUG (7/16-20-THD)
52.	3J-7354	[2]	SEAL-O-RING
53.	5J-5793	[2]	BOLT-12 POINT HEAD (1/2-13X2-IN)
54.	6V-3922 J	[2]	SEAL-O-RING
55.	1H-1023 J	[4]	SEAL-O-RING
56.	7X-5454 J	[4]	RING-BACKUP
57.	7X-9365	[2]	VALVE-BYPASS
58.	7X-5498 J	[4]	GASKET
59.	7X-5466	[2]	NUT
60.	117-6506	[2]	PLUG-ORIFICE
61.	9F-2247	[4]	PLUG-PIPE
62.	7X-5460	[2]	SLEEVE
63.	4D-2297 J	[2]	SEAL-O-RING
64.	7X-5453 J	[2]	RING-BACKUP
65.	147-7286	[1]	GASKET
66.	147-7287	[1]	PLATE-MOUNTING
67.	5S-7349	[3]	BOLT (1/4-20X0.5-IN)
68.	147-7290	[1]	GASKET-COVER
69.	147-7282	[1]	SPOOL
70.	147-7284	[1]	CAM-LOCATOR
71.	5F-9144	[1]	SEAL-O-RING
72.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
73.	8T-9003	[1]	BOLT
74.	147-7285	[1]	COVER
75.	077-6225	[1]	SWITCH (NEUTRAL START)
76.	147-7291	[1]	SPACER
77.	082-2753	[4]	BOLT (1/4-20X0.62-IN)
78.	5B-1866	[1]	PLUG-CUP
79.	7X-5457	[2]	SPRING
80.	7X-5459	[2]	BRACKET
81.		[1]	BRACKET-NEUTRAL
82.	7H-3937	[2]	LOCKWASHER (EXTERNAL TOOTH)
83.	2R-0504	[2]	NUT (5/16-18-THD)
84.	1G-8639 J	[1]	SEAL-O-RING
85.	115-2158	[1]	RING-PILOT
86.	7X-5490	[1]	COUPLING
87.	115-2157	[1]	PIN
88.	9S-8010	[1]	PLUG
89.	7X-5462	[1]	PLUG
90.	2M-9780 J	[1]	SEAL-O-RING
91.	077-3775	[1]	SHIM
92.		[1]	SPRING
93.	117-6507	[1]	VALVE-RELIEF
94.	1F-7958	[3]	NUT-FULL (1/2-13-THD)
95.	7X-5492	[1]	STUD
96.	115-2156	[1]	SHAFT-PUMP
97.	7X-5433 J	[1]	SEAL-LIP TYPE
98.	7X-5440	[1]	COVER
99.	117-8295	[1]	PLATE-VALVE
100.	7X-5478	[2]	PIN-SPRING
101.	1G-9412 J	[1]	GASKET
102.	1G-9411	[1]	ADAPTER
103.	4M-6425	[3]	BOLT (5/16-18X1-IN)
104.	7B-2742	[1]	BOLT (1/4-20X1.25-IN)
105.	7X-9367	[1]	SPOOL
106.	7X-5458	[1]	HANDLE
107.	SZ	[4]	ORIFICE
108.	Z	[1]	COVER (FRONT)
109.	Z	[1]	HOUSING (FRONT)
110.	Z	[1]	COVER (REAR)

			AVAILABLE REPAIR KIT(S):
	J	[1]	KIT-SEAL
	7X-5866 H	[2]	KIT-CYLINDER BLOCK (PROPEL MOTOR)
	7X-5431 N	[2]	KIT-SWASHPLATE
	7X-5448 P	[4]	KIT-PISTON RING
	9X-0803 S	[4]	KIT-VALVE
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		KIT MARKED J SERVICES PART(S) MARKED J
	N		KIT MARKED N SERVICES PART(S) MARKED N
	P		KIT MARKED P SERVICES PART(S) MARKED P
	S		KIT MARKED S SERVICES PART(S) MARKED S
	Z		NOT SERVICED SEPARATELY

145-8687: PUMP GP-PISTON

PUMP GP-PISTON

145-8687 PUMP GP-PISTON
S/N 1ZN129-UP; 2TN1-UP
PART OF 148-8252 PUMP & MTG GP-VIBRATORY

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-3873	[1]	RING-RETAINING
2.	116-1335	[1]	CARRIER-SHAFT
3.	1G-7357 T	[1]	SEAL-LIP TYPE
4.	6V-1196 T	[1]	SEAL-O-RING
5.	5L-4019	[1]	RING-RETAINING
6.	165-9126	[1]	BEARING-ROLLER
7.	168-8214	[1]	KIT-SHAFT
8.	1G-7368	[1]	BEARING AS-NEEDLE
9.	7M-8485 T	[3]	SEAL-O-RING
10.	9S-9334	[3]	PLUG-O-RING
11.	116-1434 T	[1]	GASKET
12.	165-9133	[1]	ADAPTER-FILTER
13.	116-3881	[23]	SCREW (M6X1X20-MM)
14.	3J-1907 T	[7]	SEAL-O-RING
15.	9S-4191	[7]	PLUG (9/16-18-THD)
16.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
17.	2M-9780 LT	[4]	SEAL-O-RING
18.	168-8883	[1]	COVER-SERVO
19.	168-8209	[2]	SETSCREW
20.	116-3883	[2]	NUT-SEAL
21.	116-3871 T	[1]	NUT-SEAL
22.	HJTZ	[2]	RING-PISTON
23.	JZ	[1]	PISTON-SERVO
24.	LZ	[2]	PLUG (VALVE)
25.	7X-5453 LT	[2]	RING-BACKUP
26.	6V-5142 LT	[2]	SEAL-O-RING
27.	168-8213	[2]	VALVE GP-CHECK & RELIEF
28.	117-8298	[1]	VALVE GP-CONTROL
29.	9X-6615 M	[4]	BOLT (M5X0.8X30-MM)
30.	168-8884	[1]	GASKET
31.	077-8353	[2]	PIN (SPRING)
32.	197-6557	[1]	COVER
33.	116-3879	[7]	SCREW (M8X1.25X30-MM)
34.	9F-2247	[3]	PLUG-PIPE
35.	165-9760	[1]	COVER-SERVO
36.	165-9134	[1]	SPOOL
37.	127-9744	[1]	PLUG
38.	1J-9671 T	[1]	SEAL-O-RING
39.	127-9745	[1]	PIN
40.	165-9766	[1]	PLATE
41.	7X-5469 S	[1]	RING-RETAINING
42.	7X-5470 S	[1]	WASHER-SPECIAL
43.	1G-7360 S	[1]	SPRING
44.	1G-7359 S	[1]	WASHER (25.4X38.18X6.5-MM THK)
45.	1G-7363 S	[1]	RETAINER
46.	165-9762 S	[3]	PIN
47.	NSZ	[1]	GUIDE (RETAINER)
48.	165-9765 S	[9]	PISTON
49.	165-9124	[1]	SWASHPLATE
			-OR-
	188-2921	[1]	SWASHPLATE
50.	3J-0695 P	[1]	BEARING AS-NEEDLE
51.	PZ	[1]	FOLLOWER-CAM
52.	SZ	[1]	CYLINDER BLOCK
53.	116-2010	[1]	PLUG-RELIEF
54.	110-6323	[1]	KIT-RELIEF SHIM (PROPEL MOTOR)
55.	116-2009	[1]	SPRING
56.	1G-7386	[1]	POPPET
57.	NSZ	[1]	RETAINER (SLIPPER)
58.	HJTZ	[2]	SEAL-O-RING
59.	Z	[2]	GASKET
60.	Z	[1]	GASKET
61.	Z	[1]	GASKET
62.	Z	[1]	COVER
63.	Z	[1]	HOUSING
64.	Z	[2]	BEARING

			AVAILABLE REPAIR KIT(S):
	165-9138 H	[1]	KIT-PISTON RING
	165-9137 J	[1]	KIT-SERVO PISTON
	116-2005 L	[2]	KIT-VALVE PLUG
	166-9035 N	[1]	KIT-RETAINER
	165-9123 P	[1]	KIT-BEARING
	165-9761 S	[1]	KIT-PUMP ROTATING GROUP
	165-9767 T	[1]	KIT-SEAL
	H		KIT MARKED H INCLUDES PART(S) MARKED H
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	L		KIT MARKED L INCLUDES PART(S) MARKED L
	M		METRIC PART
	N		KIT MARKED N INCLUDES PART(S) MARKED N
	P		KIT MARKED P INCLUDES PART(S) MARKED P
	S		KIT MARKED S INCLUDES PART(S) MARKED S
	T		KIT MARKED T INCLUDES PART(S) MARKED T
	Z		NOT SERVICED SEPARATELY

145-8689: PUMP GP-PISTON

PUMP GP-PISTON

145-8689 PUMP GP-PISTON
S/N 1ZN1-UP; 2TN1-UP
PART OF 159-9836 PUMP GP-PISTON
AN ATTACHMENT

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-3873	[1]	RING-RETAINING
2.	116-1335	[1]	CARRIER-SHAFT
3.	1G-7357 J	[1]	SEAL-LIP TYPE
4.	6V-1196	[1]	SEAL-O-RING
5.	5L-4019	[1]	RING-RETAINING
6.	165-9126	[1]	BEARING-ROLLER
7.	168-8214	[1]	KIT-SHAFT
8.	1G-7368	[1]	BEARING AS-NEEDLE
9.	7M-8485 J	[3]	SEAL-O-RING
10.	9S-9334	[3]	PLUG-O-RING
11.	116-1434 J	[1]	GASKET
12.	165-9133	[1]	ADAPTER-FILTER
13.	116-3881	[22]	SCREW (M6X1X20-MM)
14.	3J-1907 J	[6]	SEAL-O-RING
15.	9S-4191	[6]	PLUG (9/16-18-THD)
16.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
17.	2M-9780 JP	[5]	SEAL-O-RING
18.	168-8209	[2]	SETSCREW
19.	116-3883	[2]	NUT-SEAL
20.	116-3871 J	[2]	NUT-SEAL
21.	168-8883	[1]	COVER-SERVO
22.	HN	[1]	SEAL-O-RING
23.	HN	[1]	RING-PISTON
24.	127-9746	[1]	SCREEN-FILTER (VIBRATORY PISTON PUMP)
25.	9S-8008	[1]	PLUG (1-1/16-12-THD)
26.	3K-0360 J	[2]	SEAL-O-RING
27.	Z	[1]	HOUSING
28.	7X-5453 JP	[2]	RING-BACKUP
29.	5P-1480 P	[2]	SEAL-O-RING
30.	168-8213	[2]	VALVE GP-CHECK & RELIEF
31.	077-8353	[2]	PIN (SPRING)
32.	116-1330	[1]	LINK
33.	116-1331	[1]	LINK-FEEDBACK
34.	116-1333	[1]	SCREW-MOUNTING
35.	165-9131	[1]	GASKET
36.	169-4850	[1]	CONTROL
37.	116-3878	[4]	SCREW (M8X1.25X30-MM)
38.	116-3877	[3]	SCREW
39.	116-1332	[1]	LINKAGE-CONTROL
40.	197-6557	[1]	COVER
41.	116-3879	[7]	SCREW (M8X1.25X30-MM)
42.	169-4849	[1]	SPOOL
43.	116-1323	[1]	SPRING
44.	9S-8005	[1]	PLUG (3/4-16-THD)
45.	164-6665	[1]	SCREW
46.	165-9760	[1]	COVER-SERVO
47.	165-9134	[1]	SPOOL
48.	127-9744	[1]	PLUG
49.	1J-9671 J	[1]	SEAL-O-RING
50.	127-9745	[1]	PIN
51.	165-9766	[1]	PLATE
52.	7X-5469 S	[1]	RING-RETAINING
53.	7X-5470 S	[1]	WASHER-SPECIAL
54.	1G-7360 S	[1]	SPRING
55.	1G-7359 S	[1]	WASHER (25.4X38.18X6.5-MM THK)
56.	1G-7363 S	[1]	RETAINER
57.	165-9762 S	[3]	PIN
58.	166-9035	[1]	KIT-RETAINER
59.	165-9765	[9]	PISTON
60.	165-9124	[1]	SWASHPLATE
			-OR-
	188-2921	[1]	SWASHPLATE
61.	3J-0695	[1]	BEARING AS-NEEDLE
62.	165-9123	[1]	KIT-BEARING
63.	Z	[3]	PLUG
64.	116-2010	[1]	PLUG-RELIEF
65.	110-6323	[1]	KIT-RELIEF SHIM (PROPEL MOTOR)
66.	116-2009	[1]	SPRING
67.	1G-7386	[1]	POPPET
68.	J	[1]	GASKET
69.	J	[1]	GASKET
70.	J	[2]	GASKET
71.	Z	[1]	COVER
72.	Z	[2]	BEARING
73.	HZ	[1]	PISTON-SERVO
74.	H	[1]	SEAL-O-RING
75.	PZ	[1]	VALVE GP-CHECK & RELIEF
76.	J	[1]	RING-PISTON
77.	SZ	[1]	CYLINDER BLOCK

			AVAILABLE REPAIR KIT(S):
	165-9767 J	[1]	KIT-SEAL
	165-9137 H	[1]	KIT-SERVO PISTON
	165-9138 N	[1]	KIT-PISTON RING
	116-2005 P	[2]	KIT-VALVE PLUG
	165-9761 S		KIT-PUMP ROTATING GROUP
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		KIT MARKED J SERVICES PART(S) MARKED J
	N		KIT MARKED N SERVICES PART(S) MARKED N
	P		KIT MARKED P SERVICES PART(S) MARKED P
	S		KIT MARKED S SERVICES PART(S) MARKED S
	Z		NOT SERVICED SEPARATELY

159-9836: PUMP GP-PISTON

PUMP GP-PISTON

159-9836 PUMP GP-PISTON
S/N 1ZN1-UP; 2TN1-UP
PART OF 148-8268 PUMP & MTG GP-VIBRATORY
AN ATTACHMENT

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	145-8689 Y	[1]	PUMP GP-PISTON
2.	102-8809	[1]	KIT-CONNECTING PLUG (4-PIN)
3.	3E-3374	[1]	WEDGE-PLUG LOCK (4-PIN)
4.	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
5.	172-8139	[2]	COVER
	Y		SEPARATE ILLUSTRATION

105-7617: TANK & MTG GP-HYDRAULIC

TANK & MTG GP-HYDRAULIC

105-7617 TANK & MTG GP-HYDRAULIC
S/N 1ZN1-128; 2TN1-256; 2TN259-262
PART OF 112-1858, 112-2057 CHASSIS AR

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-8993 Y	[1]	CAP & STRAINER GP-HYD OIL FILL
2.	5E-8934	[1]	VENT
3.	106-7351	[2]	STRAP AS-HYDRAULIC TANK
4.	3D-2824	[1]	SEAL-O-RING
5.	077-5200 Y	[1]	GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)
6.	9S-4185	[3]	PLUG (3/4-16-THD)
7.	8T-4244 M	[4]	NUT (M12X1.75-THD)
8.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	8T-0081	[1]	VALVE-BALL
10.	7X-8381	[1]	STRAINER
11.	7X-5324	[1]	ADAPTER
12.	7X-2549 M	[4]	BOLT (M12X1.75X100-MM)
13.	7M-8485	[1]	SEAL-O-RING
14.	6V-9182	[1]	ELBOW
15.	6V-8639	[2]	CONNECTOR
16.	6V-8637	[1]	CONNECTOR
17.	6V-8625	[1]	ELBOW
18.	6V-8398	[3]	SEAL-O-RING
19.	6R-0552	[2]	WASHER (12.45X26X3.2-MM THK)
20.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
21.	5K-9090	[1]	SEAL-O-RING
22.	6V-9746	[2]	SEAL-O-RING
23.	3K-0360	[8]	SEAL-O-RING
24.	106-7165	[1]	TANK AS-HYDRAULIC
25.	110-0514	[1]	SWITCH AS-TEMPERATURE (HYDRAULIC OIL TEMP)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

141-6964: TANK & MTG GP-HYDRAULIC

TANK & MTG GP-HYDRAULIC

141-6964 TANK & MTG GP-HYDRAULIC
S/N 1ZN1-UP; 2TN257-258; 2TN263-UP
PART OF 112-1858, 112-2057, 172-8837, 172-8838 CHASSIS AR

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-8993 Y	[1]	CAP & STRAINER GP-HYD OIL FILL
2.	5E-8934	[1]	VENT
3.	106-7351	[2]	STRAP AS-HYDRAULIC TANK
4.	3D-2824	[1]	SEAL-O-RING
5.	077-5200 Y	[1]	GAUGE GP-SIGHT (HYD OIL LEVEL)
6.	9S-4185	[3]	PLUG (3/4-16-THD)
7.	8T-4244 M	[4]	NUT (M12X1.75-THD)
8.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	8T-0081	[1]	VALVE-BALL
10.	7X-8381	[1]	STRAINER
11.	7X-5324	[1]	ADAPTER
12.	7X-2549 M	[4]	BOLT (M12X1.75X100-MM)
13.	7M-8485	[1]	SEAL-O-RING
14.	6V-9182	[1]	ELBOW
15.	6V-8639	[3]	CONNECTOR
16.	6V-8637	[1]	CONNECTOR
17.	8C-8989	[1]	ELBOW
18.	6V-8398	[5]	SEAL-O-RING
19.	6R-0552	[2]	WASHER (12.45X26X3.2-MM THK)
20.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
21.	5K-9090	[1]	SEAL-O-RING
22.	6V-9746	[2]	SEAL-O-RING
23.	3K-0360	[8]	SEAL-O-RING
24.	141-6965	[1]	TANK AS-HYDRAULIC
25.	110-0514	[1]	SWITCH AS-TEMPERATURE (HYD OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
26.	6V-9830	[1]	CAP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

112-3074: VALVE & MTG GP-BLADE

VALVE & MTG GP-BLADE

112-3074 VALVE & MTG GP-BLADE
S/N 1ZN1-UP; 2TN1-UP
PART OF 178-8446, 178-8447 BLADE AR, 175-2269 BLADE GP, 189-6234, 189-6235 BLADE GP-LEVELING
Type 1
AN ATTACHMENT

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-8382 Y	[1]	VALVE GP-CONTROL
2.	3K-0360	[2]	SEAL-O-RING
3.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4133 M	[2]	NUT (M10X1.5-THD)
5.	3D-2824	[4]	SEAL-O-RING
6.	6V-8625	[1]	ELBOW
7.	5E-8827	[1]	CABLE
8.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
9.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
10.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
11.	8T-1686	[1]	ADAPTER-ELBOW
12.	8T-5429	[2]	ELBOW
13.	7R-3147 Y	[1]	CONTROL GP-BLADE
14.	6V-1722	[2]	ADAPTER
15.	2N-3680	[2]	SCREW-HEAD (1/4-20X0.75-IN)
16.	6V-8398	[5]	SEAL-O-RING
17.	8C-8989	[1]	ELBOW
18.	8T-6408 M	[1]	BOLT (M10X1.5X160-MM)
19.	8T-8911	[1]	BOLT (5/16-18X2-IN)
20.	4V-0612	[1]	PLATE
21.	7R-7962	[2]	CLAMP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

112-3074: VALVE & MTG GP-BLADE

VALVE & MTG GP-BLADE

112-3074 VALVE & MTG GP-BLADE
S/N 1ZN1-UP; 2TN1-UP
PART OF 178-8446, 178-8447 BLADE AR, 175-2269 BLADE GP, 189-6234, 189-6235 BLADE GP-LEVELING
Type 2
AN ATTACHMENT

Parts for your CP-433C VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-8382 Y	[1]	VALVE GP-CONTROL
2.	3K-0360	[2]	SEAL-O-RING
3.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4133 M	[2]	NUT (M10X1.5-THD)
5.	3D-2824	[4]	SEAL-O-RING
6.	6V-8625	[1]	ELBOW
7.	5E-8827	[1]	CABLE
8.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
9.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
10.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
11.	8T-1686	[1]	ADAPTER-ELBOW
12.	8T-5429	[2]	ELBOW
13.	201-2522	[1]	CONTROL GP-BLADE
14.	6V-1722	[2]	ADAPTER
15.	2N-3680	[2]	SCREW-HEAD (1/4-20X0.75-IN)
16.	6V-8398	[5]	SEAL-O-RING
17.	8C-8989	[1]	ELBOW
18.	8T-6408 M	[1]	BOLT (M10X1.5X160-MM)
19.	8T-8911	[1]	BOLT (5/16-18X2-IN)
20.	4V-0612	[1]	PLATE
21.	7R-7962	[2]	CLAMP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

PUMP GP

Operation and Maintenance Manual

Neutral Start Switch - Test
CP-433C, CS-431C and CS-433C Paving Compactors

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Specifications

Pump
CP-433C & CS-433C VIBRATORY COMPACTORS STEERING SYSTEM

Cylinders
CP-433C & CS-433C VIBRATORY COMPACTORS STEERING SYSTEM

Tandem Propel Pump
CP-433C & CS433C VIBRATORY COMPACTORS PROPEL SYSTEM

Pump Mounting Group
CP-433C & CS433C VIBRATORY COMPACTORS PROPEL SYSTEM

Vibratory Pump<BR> (9XL1-228, 3WZ1-157, 2JM1-578, 4JZ1-121, 3TM1-705, 5BZ1-118, 6EN1-126, 1ZN1-120, 2TN1-117)
CP-433C & CS-433C VIBRATORY COMPACTORS VIBRATORY SYSTEM

Vibratory Pump<BR> (9XL229-Up, 3WZ158-Up, 2JM579-Up, 4JZ122-Up, 3TM706-Up, 5BZ119-Up, 6EN127-Up, 2TN118-Up, 1ZN121-Up, 1FS1-Up, 1XZ1-Up)
CP-433C & CS-433C VIBRATORY COMPACTORS VIBRATORY SYSTEM

Tandem Pump
SUPPLEMENT FOR CS-431C VIBRATORY COMPACTOR THIS SUPPLEMENT TO B

Piston Pump
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System

Piston Pump (Axle and Drum Propel)
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Steering Pump and Mounting
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Systems Operation

Piston Pump (Axle and Drum Propel)
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Gear Pump
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System

Reuse And Salvage Guidelines

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Testing and Adjusting

Relief Valve (Charge) - Test and Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System

Relief Valve (Piston Pump) - Test and Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System

Piston Pump Control - Test and Adjust - Variable Frequency
CS-431C, CP-433C and CS-433C Vibratory Compactors Vibratory System

Relief Valve (Charge) - Test and Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Relief Valve (Piston Pump) - Test and Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Piston Pump Servo Neutral - Test and Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Manual Displacement Control Neutral - Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Neutral Start Switch - Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Pump Synchronization - Test and Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Servo Pressure - Test
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System

Bench Test Procedures

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Disassembly and Assembly

Steering Pump
CS-431C, CP-433C & CS-433C VIBRATORY COMPACTORS MACHINE SYST

Propel & Vibratory Pumps <BR> (CS-431C)
CS-431C, CP-433C & CS-433C VIBRATORY COMPACTORS MACHINE SYST

Propel & Vibratory Pumps <BR> (CS-433C & CP-433C)
CS-431C, CP-433C & CS-433C VIBRATORY COMPACTORS MACHINE SYST

Service Magazine

New Vibratory Pump And Higher Efficiency Motor Improves Compactor Performance{5070,5058,5651,5652}
1999/06/01

A New Flange and A New Hub are Available for the Propel Pump and Mounting Group {3203, 5070}
2002/05/20

Correction to Disassembly and Assembly Module , "Remove and Install Propel and Vibratory Pumps" {5070}
2002/03/18

Correction to Specifications, Systems Operation/Testing and Adjusting , "Relief Valve (Piston Pump) - Test and Adjust" {3203, 5070}
2004/04/12

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog CP-433C :

Truck sale:

42,500

Caterpillar CP-433C, Construction
- Single drum rollers
GREGORY POOLE EQUIPMENT CO.

CATERPILLAR CP-433C 2000
- VIBRATORY SINGLE DRUM PAD
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan

CATERPILLAR CP-433C 1999
- COMPACTORS
BUTLER MACHINERY CO
3401 33rd St SW - Fargo - North Dakota

CAT CP-433C

Don Smock Auction Co.
Pendleton, Indiana 46064

USD $49,900

1997 CAT CP-433C

Construction Station
Wayne, Michigan