AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

134-2346 MOTOR GP-POWER ADJUSTER PART OF 134-2341, 136-4590 SLOPER GP-POWER AN ATTACHMENT 10 FT ASPHALT SCREED


CONTROLS
MOTOR GP-POWER ADJUSTER
SLOPER GP

ASPHALT SCREED 10 FT ASPHALT SCREED 3PM
 10B Pavemaster Screed 3PM00001-UP KEBP0147 10 FT 3PM   (1993)

CONTROLS

MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
109-0336 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
134-2346 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3731 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
176-0351 MOTOR GP-POWER ADJUSTER
 

#KEBP01470020
 

134-2346: MOTOR GP-POWER ADJUSTER

134-2346 MOTOR GP-POWER ADJUSTER
PART OF 134-2341, 136-4590 SLOPER GP-POWER
AN ATTACHMENT
i01502342 KEBP0147
1342346 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-4191 [1] CLEVIS  
2. 122-4233 [1] WIPER  
3. 203-2210 [1] POST  
4. 123-3683 [1] BUSHING-BRONZE  
5. 6L-4081 [2] BEARING-THRUST  
6. 098-3595 [2] PIN  
7. 202-6484 [1] KIT-GEAR  
    (INCLUDES SHAFT, GEARS & GROOVE PIN)
8. 202-6486 [2] GEAR (15-TEETH)  
9. 202-6487 [1] LIMITER-TORQUE  
10. 6L-4082 [1] RACE-THRUST BEARING  
11. 123-3684 [1] BUSHING-BRONZE  
12. 171-6787 [2] DOWEL  
13. 077-5077 [2] BUSHING-TERMINAL  
14. 168-2512 [1] SHAFT-IDLER  
15. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
16. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
17. 171-3716 [1] GASKET-COVER  
18. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
19. 206-6738 [1] MOTOR AS (24-VOLT)  
20. 109-0887 E SLEEVE (23-CM EACH)  
  153-6440 J TUBE (2.1-DM)  
21. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#KEBP01470021
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3472 CROWN GP-POWER
Type 1
AN ATTACHMENT
i01159640 KEBP0147
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6592 [1] MOTOR AS  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 171-3714 [1] LIMITER-TORQUE  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 9X-1813 E SLEEVE (23-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01470022
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3472 CROWN GP-POWER
Type 2
AN ATTACHMENT
i02198331 KEBP0147
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7897 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 B [1] RACE-THRUST BEARING (1/2IN SHAFT)  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01470023
 

165-3731: MOTOR GP-POWER ADJUSTER

165-3731 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 134-8495 ADJUSTER GP-STRIKE-OFF
AN ATTACHMENT
i01161626 KEBP0147
1653731 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 123-3683 [2] BUSHING-BRONZE  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7898 [1] POWERHEAD AS  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 109-0887 E SLEEVE (24-CM EACH)  
19. 9L-9184 [1] RACE-THRUST BEARING  
20. 153-6440 J TUBE (2.1-DM)  
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#KEBP01470024
 

176-0351: MOTOR GP-POWER ADJUSTER

176-0351 MOTOR GP-POWER ADJUSTER
PART OF 180-9176 SLOPER GP-POWER
AN ATTACHMENT
i01501191 KEBP0147
1760351 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 202-6482 [1] CLEVIS  
2. 122-4233 [1] WIPER  
3. 202-6483 [1] POST  
4. 123-3684 [1] BUSHING-BRONZE  
5. 6L-4081 [2] BEARING-THRUST  
6. 098-3595 [2] PIN  
7. 202-6484 [1] KIT-GEAR  
8. 202-6486 [2] GEAR (15-TEETH)  
9. 202-6487 [1] LIMITER-TORQUE  
10. 7M-7193 [1] RACE-THRUST BEARING  
11. 123-3683 [1] BUSHING-BRONZE  
12. 171-6787 [2] DOWEL  
13. 077-5077 [2] BUSHING-TERMINAL  
14. 168-2512 [1] SHAFT-IDLER  
15. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
16. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
17. 171-3716 [1] GASKET-COVER  
18. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
19. 206-6738 [1] MOTOR AS (24-VOLT)  
20. 109-0887 BE SLEEVE  
21. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
22. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01470025
 

134-2341: SLOPER GP-POWER

134-2341 SLOPER GP-POWER
BASIC
PART OF 115-1471 STRIKE-OFF AR
AN ATTACHMENT
i00508475 KEBP0147
1342341 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-2346 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 134-2347 [4] SPACER  
3. 116-6985 [2] SCALE-SLOPER  
4. 134-2348 [2] PLATE  
5. 5D-8412 [8] SCREW-ROUND HEAD (8-32X0.5-IN)  
6. 134-2351 [2] BRACKET AS-MOUNTING  
7. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
8. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 010-2901 [2] SETSCREW-SQUARE HEAD  
10. 1B-2578 [2] NUT (3/8-16-THD)  
11. 8T-5361 [2] WASHER-HARD (28X49X5-MM THK)  
12. 1K-6859 [2] NUT (1-8-THD)  
13. 3B-4631 [2] PIN-COTTER  
14. 106-0547 [2] WASHER  
15. 134-2353 [2] POINTER  
16. 7X-0323 [2] BOLT (1/2-13X0.5-IN)  
17. 134-6604 [1] TOOL-OVERRIDE  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP01470026
 

136-4590: SLOPER GP-POWER

136-4590 SLOPER GP-POWER
PART OF 115-1471 STRIKE-OFF AR
AN ATTACHMENT
i00561668 KEBP0147
1364590 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-2346 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 134-2347 [4] SPACER  
3. 116-6984 [2] SCALE  
4. 134-2348 [2] PLATE  
5. 5D-8412 [8] SCREW-ROUND HEAD (8-32X0.5-IN)  
6. 134-2351 [2] BRACKET AS-MOUNTING  
7. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
8. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 010-2901 [2] SETSCREW-SQUARE HEAD  
10. 1B-2578 [2] NUT (3/8-16-THD)  
11. 8T-5361 [2] WASHER-HARD (28X49X5-MM THK)  
12. 1K-6859 [2] NUT (1-8-THD)  
13. 3B-4631 [2] PIN-COTTER  
14. 106-0547 [2] WASHER  
15. 134-2353 [2] POINTER  
16. 7X-0323 [2] BOLT (1/2-13X0.5-IN)  
17. 134-6604 [1] TOOL-OVERRIDE  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP01470027
 

180-9176: SLOPER GP-POWER

180-9176 SLOPER GP-POWER
AN ATTACHMENT
i01243331 KEBP0147
1809176 SLOPER GP-POWER Parts scheme 1809176 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-2436 [2] PLATE  
2. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
3. 176-0351 Y [2] MOTOR GP-POWER ADJUSTER  
4. 175-2200 [2] POINTER  
5. 3E-9864 [2] LOCKNUT (1-8-THD)  
6. 126-8928 [4] WASHER-HARD (26X40X8-MM THK)  
7. 175-0221 [2] PLATE  
8. 6V-8801 [2] NUT (3/8-16-THD)  
9. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
11. 6V-8188 [2] NUT (1/2-13-THD)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01470028
 

110-1524: SLOPER GP-STRIKE-OFF

110-1524 SLOPER GP-STRIKE-OFF
BASIC
PART OF 115-1471 STRIKE-OFF AR
Type 1
AN ATTACHMENT
i00494426 KEBP0147
1101524 SLOPER GP-STRIKE-OFF Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-7908 [2] JACK GP-HEIGHT ADJUSTER  
2. 6K-3632 [2] LOCKNUT (1-8-THD)  
3. 8T-5361 [2] WASHER-HARD (28X49X5-MM THK)  
4. 8T-4835 [4] BOLT (1/2-13X2-IN)  
5. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 6V-8188 [4] NUT (1/2-13-THD)  
7. 115-4506 [2] PLATE  
8. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
9. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-8801 [2] NUT (3/8-16-THD)  
11. 5D-8412 [4] SCREW-ROUND HEAD (8-32X0.5-IN)  
12. 116-6984 [2] SCALE  
13. 1V-6645 [2] SPACER (0.493X0.675X0.75-IN THK)  
14. 8T-7008 [2] BOLT (3/8-16X3-IN)  
15. 116-6986 [2] POINTER  
16. 106-0547 [2] WASHER  
17. 2H-3881 [2] SETSCREW-SQUARE HEAD  
18. 1B-2578 [2] NUT (3/8-16-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01470029
 

110-1524: SLOPER GP-STRIKE-OFF

110-1524 SLOPER GP-STRIKE-OFF
BASIC
PART OF 115-1471 STRIKE-OFF AR
Type 2
AN ATTACHMENT
i00494428 KEBP0147
1101524 SLOPER GP-STRIKE-OFF Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] JACK GP-HEIGHT ADJUSTER  
  [1] JACK GP-HEIGHT ADJUSTER  
2. 6K-3632 [2] LOCKNUT (1-8-THD)  
3. 8T-5361 [2] WASHER-HARD (28X49X5-MM THK)  
4. 8T-4835 [4] BOLT (1/2-13X2-IN)  
5. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 6V-8188 [4] NUT (1/2-13-THD)  
7. 115-4506 [2] PLATE  
8. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
9. 8T-4896 C [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 1B-2578 [2] NUT (3/8-16-THD)  
11. 5D-8412 [4] SCREW-ROUND HEAD (8-32X0.5-IN)  
12. 116-6984 [2] SCALE  
13. 2H-3881 [2] SETSCREW-SQUARE HEAD  
14. 8T-8915 C [2] BOLT (3/8-16X3.25-IN)  
15. 116-6986 [2] POINTER  
16. [2] BUSHING  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog 10 FT :

MOTOR GP-POWER ADJUSTER
109-0336 MOTOR GP-POWER ADJUSTER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP
110-1531 CROWN GP
CROWN GP
110-1531 CROWN GP
CONTROL GP-THICKNESS
134-1728 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
134-1727 CONTROL GP-THICKNESS
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3731 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
176-0351 MOTOR GP-POWER ADJUSTER
SLOPER GP-POWER
134-2341 SLOPER GP-POWER
SLOPER GP-POWER
136-4590 SLOPER GP-POWER
SLOPER GP-POWER
180-9176 SLOPER GP-POWER
SLOPER GP-STRIKE-OFF
110-1524 SLOPER GP-STRIKE-OFF

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.