AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-2986 COVER GP-CYLINDER BLOCK S/N 4TF17600-42391 PART OF 111-7718 ENGINE AR CS-531C VIBRATORY COMPACTOR


BASIC ENGINE
CYLINDER BLOCK GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

VIBRATORY COMPACTOR CS-531C VIBRATORY COMPACTOR 9RN
 CS-531C Vibratory Compactor 9RN00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0148 CS-531C 9RN   (1995)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
 

#KEBP01480010
 

7E-2986: COVER GP-CYLINDER BLOCK

7E-2986 COVER GP-CYLINDER BLOCK
S/N 4TF17600-42391
PART OF 111-7718 ENGINE AR
i00401779 KEBP0148
7E2986 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [11] BOLT (M8X1.25X30-MM)  
2. 9M-1974 [23] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-3872 [6] SLEEVE (MARKED X)  
4. 7W-3871 [2] COVER-SIDE  
5. 7W-9699 [3] GASKET  
6. 7W-9395 [1] COVER-SIDE  
7. 6V-5217 M [12] BOLT (M8X1.25X20-MM)  
8. 2W-6544 [1] COVER  
  1U-8846 B SEALANT-GASKET  
9. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
10. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
11. 4F-9653 [1] SEAL-O-RING  
12. 4W-8339 [1] COVER  
13. 110-7618 [4] BOLT AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP01480011
 

7L-0004: COVER GP-FRONT HOUSING

7L-0004 COVER GP-FRONT HOUSING
S/N 4TF17600-UP
PART OF 111-7718 ENGINE AR
i00406975 KEBP0148
7L0004 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
2. 106-7920 [1] COVER AS-FRONT  
3. 6V-2317 M [10] BOLT (M8X1.25X30-MM)  
4. 135-9819 [1] SEAL-INTEGRAL  
5. 6V-8336 M [2] BOLT (M12X1.75X70-MM)  
6. 6V-8149 M [2] NUT (M12X1.75-THD)  
7. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 7W-6552 [1] GASKET  
9. 4W-2026 [1] COVER  
10. 6V-2317 BM [2] BOLT (M8X1.25X30-MM)(LOCATION A)  
11. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP01480012
 

4W-2172: COVER GP-VALVE MECHANISM

4W-2172 COVER GP-VALVE MECHANISM
S/N 4TF17600-UP
PART OF 111-7718 ENGINE AR
i00378399 KEBP0148
4W2172 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2940 [1] GASKET (VALVE COVER)  
2. 6V-2315 M [14] BOLT (M6X1X35-MM)  
3. 119-2960 [1] COVER  
4. 5P-0537 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#KEBP01480013
 

4W-2197: CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
S/N 4TF17600-43669; 4TF43671-43671; 4TF43674-44113; 4TF44115-44116; 4TF44118-44119; 4TF44123-44125; 4TF44128-44128; 4TF44130-44135; 4TF44137-44155; 4TF44157-44436
PART OF 111-7718 ENGINE AR
i00378465 KEBP0148
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1725 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)(50 TEETH)  
2. 107-7708 [3] BEARING-MAIN  
  7C-6964 AB [1] BEARING-MAIN (0.5-MM OS)  
  7C-6965 AB [1] BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6961 AB [1] BEARING-MAIN (0.25-MM US)  
  7C-6962 AB [1] BEARING-MAIN (0.5-MM US)  
  AB [1] BEARING-MAIN (0.75-MM US)  
3. 101-1530 [3] BEARING-MAIN  
  7C-6974 AB [1] BEARING-MAIN (0.5-MM OS)  
  7C-6975 AB [1] BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6971 AB [1] BEARING-MAIN (0.25-MM US)  
  7C-6972 AB [1] BEARING-MAIN (0.5-MM US)  
  AB [1] BEARING-MAIN (0.75-MM US)  
4. 107-7602 [1] BEARING-THRUST  
  7C-6969 AB [1] BEARING-THRUST (0.5-MM OS)  
  7C-6970 AB [1] BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
  7C-6966 AB [1] BEARING-THRUST (0.25-MM US)  
  7C-6967 AB [1] BEARING-THRUST (0.5-MM US)  
  AB [1] BEARING-THRUST (0.75-MM US)  
   
  7C-7980 AF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS USED ONLY TO SALVAGE
    (REPAIR) THE REAR SEAL SURFACE OF THE
    CRANKSHAFT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP01480014
 

4W-2197: CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
S/N 4TF43670-UP
PART OF 111-7718 ENGINE AR
i00886603 KEBP0148
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 489-2731 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 [1] BEARING-THRUST  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 [6] BEARING-MAIN  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP01480015
 

100-4948: CYLINDER BLOCK GP

100-4948 CYLINDER BLOCK GP
S/N 4TF23955-28600
PART OF 2W-9746 CYLINDER BLOCK GP
i00460556 KEBP0148
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP01480016
 

129-1095: CYLINDER BLOCK GP

129-1095 CYLINDER BLOCK GP
S/N 4TF28601-43669; 4TF43671-43671; 4TF43674-44113; 4TF44115-44116; 4TF44118-44119; 4TF44123-44125; 4TF44128-44128; 4TF44130-44135; 4TF44137-44155; 4TF44157-44436
PART OF 2W-9746 CYLINDER BLOCK GP
i00522486 KEBP0148
1291095 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP01480017
 

149-5403: CYLINDER BLOCK GP

149-5403 CYLINDER BLOCK GP
S/N 4TF43670-43670; 4TF43672-43673; 4TF44114-44114; 4TF44117-44117; 4TF44120-44122; 4TF44126-44127; 4TF44129-44129; 4TF44136-44136; 4TF44156-44156; 4TF44437-50340
PART OF 2W-9746 CYLINDER BLOCK GP
i01195910 KEBP0148
1495403 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5402 [1] CYLINDER BLOCK AS  
1A. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
1B. 9X-8916 M [14] BOLT (M16X2X140-MM)  
1C. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
2. 2W-7213 [6] BUSHING (CAMSHAFT)  
3. 3K-0360 [1] SEAL-O-RING  
4. 9S-8005 [1] PLUG (3/4-16-THD)  
5. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
7. 2M-6471 [2] PLUG-CUP  
8. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
9. 3D-2824 B [2] SEAL-O-RING  
10. 3H-5552 [1] PLUG-CUP  
11. 9S-8006 [1] PLUG (7/8-14-THD)  
12. 2M-9780 [1] SEAL-O-RING  
13. 216-5586 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP01480018
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 4TF17600-23954
PART OF 111-7718 ENGINE AR
i00361449 KEBP0148
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [4] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01480019
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 4TF23955-28600
PART OF 111-7718 ENGINE AR
i00361450 KEBP0148
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your CS-531C VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3114, 3116, 3126 Engines
Piston Cooling Jet
3114, 3116, 3126 Engines
Cylinder Block Cover Group
3114, 3116, 3126 Engines
Main Bearing Journal
3114, 3116, 3126 Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog CS-531C :

COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CAMSHAFT GP
2W-9608 CAMSHAFT GP
139-4075 INSTALLATION AR-ENGINE
119-5037 INSTALLATION AR-ENGINE
111-7718 ENGINE AR
118-2853 GENERAL AR
144-0510 CHASSIS AR
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP

Truck sale:

1999 CAT CS-531C
USD $32,000 
1999 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
1996 CAT CS-531C
USD $27,000 
1996 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
1997 CAT CS-531C
USD $25,000 
1997 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
1999 CAT CS-531C
USD $29,000 
1999 CAT CS-531C

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.