HYDRAULIC SYSTEM
MOTOR GPPUMP GP
MOTOR GP
FUEL SYSTEM
TANK GP-FUELHYDRAULIC SYSTEM
VALVE GP-CONTROLHYDRAULIC SYSTEM
MOTOR GP#KEBP01590310
137-4581: ROTATING GP-MOTOR
137-4581 ROTATING GP-MOTOR
S/N 3BR136-UP
PART OF 135-3260, 135-3261 MOTOR GP-PISTON
ALSO AN ATTACHMENT
S/N 3BR136-UP
PART OF 135-3260, 135-3261 MOTOR GP-PISTON
ALSO AN ATTACHMENT
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP01590311
226-2756: ROTATING GP-MOTOR
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP01590312
280-7343: ROTATING GP-MOTOR
280-7343 ROTATING GP-MOTOR -IMPLEMENT
S/N 3BR677-UP
PART OF 226-2756 ROTATING GP-MOTOR
S/N 3BR677-UP
PART OF 226-2756 ROTATING GP-MOTOR
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-5632 | [9] | PISTON | |
| 2. | 126-5638 | [1] | PLATE-RETAINER | |
| 3. | 126-5639 | [1] | RETAINER | |
| 4. | 127-4195 | [1] | SHIM (1.2-MM THK) | |
| 5. | 127-4196 | [1] | SHIM (1-MM THK) | |
| 6. | 127-4197 | [1] | SHIM (0.8-MM THK) | |
| 7. | 127-4198 | [1] | SHIM (0.6-MM THK) | |
| 8. | 126-5633 | [1] | SPRING-CUP | |
| 9. | 126-5641 | [2] | SHIM (3-MM THK) | |
| 10. | 126-5642 | [1] | SPRING | |
| 11. | 8T-9597 | [1] | RING-RETAINING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#KEBP01590313
177-3633: ROTATING GP-PUMP
177-3633 ROTATING GP-PUMP -PROPEL, AXLE
S/N 3BR556-UP
PART OF 164-2851 PUMP GP-PISTON
FIELD REPLACEMENT ORDER @@@@@276-8206@@@@@
S/N 3BR556-UP
PART OF 164-2851 PUMP GP-PISTON
FIELD REPLACEMENT ORDER @@@@@276-8206@@@@@
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-0941 | [1] | RING-RETAINING | |
| 2. | 194-1983 | [1] | SEAL-SHAFT | |
| 3. | 126-9587 | [1] | RING-RETAINING | |
| 4. | 126-8901 | [1] | SHAFT | |
| 5. | 117-7251 | [1] | BEARING | |
| 6. | 108-3565 | [1] | CLIP | |
| 7. | 125-9134 | [1] | BEARING AS | |
| 8. | 122-9068 | [1] | WIRE | |
| 9. | 117-7252 | [1] | CAGE | |
| 10. | 112-4657 | [1] | PIN | |
| 11. | 117-7241 | [1] | PLATE | |
| 12. | 117-7240 | [1] | CRADLE | |
| 13. | 1G-3410 | [1] | WIRE | |
| 14. | 126-8842 | [1] | RING-SNAP | |
| 15. | 122-9070 | [2] | SHIM (3-MM THK) | |
| 16. | 122-9071 | [1] | SPRING | |
| 17. | 117-7239 | [1] | SPRING SET | |
| 18. | 117-7245 B | [1] | SHIM (1.2-MM THK) | |
| 19. | 117-7246 B | [1] | SHIM (1-MM THK) | |
| 20. | 117-7247 B | [1] | SHIM (0.8-MM THK) | |
| 21. | 117-7248 B | [1] | SHIM (0.6-MM THK) | |
| 22. | 117-7250 | [1] | RETAINER | |
| 23. | 117-7249 | [1] | PLATE-RETAINER | |
| 24. | 117-7238 | [9] | PISTON | |
| 25. | 177-6915 | [1] | CYLINDER | |
| B | USE AS REQUIRED | |||
#KEBP01590314
190-7632: ROTATING GP-PUMP
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 194-1983 | [1] | SEAL-SHAFT | |
| 2. | 191-4522 | [1] | SHAFT | |
| 3. | 6V-5200 | [1] | RING-RETAINING | |
| 4. | 122-9068 | [1] | WIRE | |
| 5. | 117-7241 | [1] | PLATE | |
| 6. | 112-4657 | [1] | PIN | |
| 8. | 117-7240 | [1] | CRADLE | |
| 9. | 1G-3410 | [1] | WIRE | |
| 10. | 6E-0725 | [2] | ROLLER | |
| 11. | 117-7252 | [1] | CAGE | |
| 12. | 125-9134 | [1] | BEARING AS | |
| 13. | 117-7251 | [1] | BEARING | |
| 14. | 126-9587 | [1] | RING-RETAINING | |
| 15. | 095-0941 | [1] | RING-RETAINING | |
| 16. | 192-2839 | [1] | KIT-ROTATOR | |
| (INCLUDES PISTONS, RETAINER PLATE, RETAINER, CYLINDER, PINS, SHIM, SPRING, RETAINING RING & PLATE) | ||||
#KEBP01590315
276-8206: ROTATING GP-PUMP
276-8206 ROTATING GP-PUMP -PROPEL
S/N 3BR556-UP
FIELD REPLACEMENT FOR @@@@@177-3633@@@@@
S/N 3BR556-UP
FIELD REPLACEMENT FOR @@@@@177-3633@@@@@
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 212-4483 | [2] | RING-RETAINING | |
| 2. | 194-1983 | [1] | SEAL-SHAFT | |
| 3. | 117-7251 | [1] | BEARING | |
| 4. | 108-3565 | [1] | CLIP | |
| 5. | 251-1803 | [1] | PLATE-CONTROL | |
| 6. | 251-1752 | [1] | BARREL GP-PUMP | |
| (INCLUDES RING-SNAP, SHIMS, SPRING, SPRING SET, RETAINER, PLATE-RETAINER, PISTON & CYLINDER) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#KEBP01590316
151-8877: SHAFT GP-MOTOR
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 234-2872 | [1] | SHIM (3.90-MM THK) | |
| 2. | 141-0235 B | [1] | SHIM (2.65-MM THK) | |
| 141-0236 B | [1] | SHIM (2.7-MM THK) | ||
| 141-0237 B | [1] | SHIM (2.75-MM THK) | ||
| 141-0238 B | [1] | SHIM (2.8-MM THK) | ||
| 141-0239 B | [1] | SHIM (2.85-MM THK) | ||
| 141-0240 B | [1] | SHIM (2.9-MM THK) | ||
| 141-0241 B | [1] | SHIM (2.95-MM THK) | ||
| 141-0242 B | [1] | SHIM (3-MM THK) | ||
| 3. | 8T-4241 | [1] | RING-RETAINING (EXTERNAL) | |
| 4. | 133-8929 | [1] | BEARING AS | |
| 5. | 141-0244 | [1] | BEARING AS | |
| B | USE AS REQUIRED | |||
#KEBP01590317
1G-9842: TANK & MTG GP-HYDRAULIC & FUEL
1G-9842 TANK & MTG GP-HYDRAULIC & FUEL
S/N 3BR1-UP
PART OF 120-2484 CHASSIS AR
S/N 3BR1-UP
PART OF 120-2484 CHASSIS AR
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 103-8151 | [1] | TANK AS | |
| 2. | 5E-8934 | [1] | VENT | |
| 3. | 9P-7121 | [1] | STRAINER-FUEL (FUEL TANK) | |
| 4. | 087-1788 Y | [1] | CAP & STRAINER GP-HYD OIL FILL | |
| 5. | 077-5200 Y | [1] | GAUGE GP-SIGHT (HYD LEVEL) | |
| 6. | 6R-0552 | [2] | WASHER (12.45X26X3.2-MM THK) | |
| 7. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 110-8149 | [2] | SHEET | |
| 9. | 7X-8381 | [1] | STRAINER | |
| 10. | 104-7305 | [2] | STRAP AS | |
| 11. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 12. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 13. | 3K-6060 | [2] | LOCKNUT (3/8-16-THD) | |
| 14. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 7T-2036 | [1] | CAP AS-FILLER (FUEL) | |
| 8P-0408 | [1] | CAP-FILLER (FUEL TANK) | ||
| 15A. | 7T-2037 | [1] | GASKET | |
| 15B. | 4B-1663 | [1] | FILTER ELEMENT-FUEL (FUEL CAP) | |
| 15C. | 4B-5949 | [1] | FILTER ELEMENT-FUEL (FUEL CAP) | |
| 15D. | 4B-5423 | [1] | GASKET | |
| 15E. | 3F-4134 | [1] | BAFFLE (FUEL TANK FILL CAP) | |
| 15F. | 7B-2002 | [1] | WASHER (10.2X44.5X3-MM THK) | |
| 15G. | 7T-2009 | [1] | VALVE AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP01590318
117-0530: VALVE GP-CONTROL
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-0360 | [3] | SEAL-O-RING | |
| 2. | 8T-1683 | [1] | ELBOW | |
| 3. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 4. | 123-3277 Y | [1] | CONTROL GP-HYDRAULIC | |
| 5. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 6. | 9D-7032 | [1] | SWITCH AS-PRESSURE (BACKUP ALARM) | |
| 7. | 7K-1181 | [1] | STRAP-CABLE | |
| 8. | 5E-8017 | [1] | ADAPTER | |
| 9. | 3J-1907 | [2] | SEAL-O-RING | |
| 10. | 8T-6338 | [1] | TEE-O-RING PORT | |
| 11. | 6V-8397 | [1] | SEAL-O-RING | |
| 12. | 6V-8627 | [1] | ELBOW | |
| 13. | 4J-5477 | [3] | SEAL-O-RING | |
| 14. | 5P-3501 | [1] | ADAPTER | |
| 15. | 6V-8398 | [1] | SEAL-O-RING | |
| 16. | 6V-8935 | [1] | REDUCER | |
| 17. | 6V-8554 | [1] | NUT (13/16-16-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP01590319
117-0530: VALVE GP-CONTROL
117-0530 VALVE GP-CONTROL
S/N 3BR90-468
PART OF 120-2492, 140-1984, 159-4568 OPERATOR AR
S/N 3BR90-468
PART OF 120-2492, 140-1984, 159-4568 OPERATOR AR
Parts for your CB-634C VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-0360 | [3] | SEAL-O-RING | |
| 2. | 8T-1683 | [1] | ELBOW | |
| 3. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 4. | 133-5079 CY | [1] | CONTROL GP-HYDRAULIC | |
| 5. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 6. | 9D-7032 | [1] | SWITCH AS-PRESSURE (BACKUP ALARM) | |
| 7. | 7K-1181 | [1] | STRAP-CABLE | |
| 8. | 5E-8017 | [1] | ADAPTER | |
| 9. | 3J-1907 | [2] | SEAL-O-RING | |
| 10. | 8T-6338 | [1] | TEE-O-RING PORT | |
| 11. | 6V-8397 | [1] | SEAL-O-RING | |
| 12. | 6V-8627 | [1] | ELBOW | |
| 13. | 4J-5477 | [3] | SEAL-O-RING | |
| 14. | 5P-3501 | [1] | ADAPTER | |
| 15. | 6V-8398 | [1] | SEAL-O-RING | |
| 16. | 6V-8935 | [1] | REDUCER | |
| 17. | 6V-8554 | [1] | NUT (13/16-16-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
MOTOR GP
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
Product Support Program For Installing Larger Valves In The Propel Motors Of Certain CB-534C, CB-634C Compactors
Product Support Program For Installing Larger Valves In The Propel Motors Of Certain CB-534C, CB-634C Compactors
Product Support Program For Installing Larger Valves In The Propel Motors Of Certain CB-534C, CB-634C Compactors
Service Letter-Americas
Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Caterpillar Parts SIS Catalog CB-634C :
Truck sale:
25,424
Caterpillar CB634C, pneumatic tired compactors, Construction
- vibratory plate compactor
TOROMONT CAT
- vibratory plate compactor
TOROMONT CAT


