AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-4812 FASTENER GP-FUEL INJ PUMP S/N 98Z1135-UP PART OF 110-2397, 129-1213 GOVERNOR GP-UNIT INJECTOR BG-245C


FUEL SYSTEM
FASTENER GP
FILTER GP-FUEL
LINES GP-FUEL
GOVERNOR GP

ASPHALT PAVER BG-245C ASPHALT PAVER 4XN
 CATERPILLAR AP-1050B BARBER-GREENE BG-245C Asphalt Pavers 4XN00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0162 BG-245C 4XN   (1995)

FUEL SYSTEM

FASTENER GP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
 

#KEBP01620130
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 98Z1135-UP
PART OF 110-2397, 129-1213 GOVERNOR GP-UNIT INJECTOR
i00122408 KEBP0162
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING (FUEL INJECTION PUMP)  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#KEBP01620131
 

6I-2693: FILTER GP-FUEL

6I-2693 FILTER GP-FUEL
S/N 98Z1135-UP
PART OF 105-4404, 133-4245 ENGINE AR
FOR USE WITH @@@@@ 1N-3477@@@@@
i00122203 KEBP0162
6I2693 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6V-9607 BM [2] BOLT (M8X1.25X120-MM)  
3. 3J-1907 [1] SEAL-O-RING  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 6I-4802 C [1] BASE AS  
  6I-4801 C [1] INSERT-FILTER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP01620132
 

9Y-0283: FITTING GP-FUEL LINES

9Y-0283 FITTING GP-FUEL LINES
S/N 98Z20866-30399
PART OF 133-4245 ENGINE AR
i00436217 KEBP0162
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-4924 [2] ELBOW  
  3J-1907 [2] SEAL-O-RING  
 

#KEBP01620133
 

110-2326: GOVERNOR GP-UNIT INJECTOR

110-2326 GOVERNOR GP-UNIT INJECTOR
S/N 98Z1135-UP
PART OF 110-2397 GOVERNOR GP-UNIT INJECTOR
Type 1
i00494594 KEBP0162
1102326 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4267 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1441 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7E-0155 [1] SCREEN AS-FUEL  
7. 4P-5746 [1] CONTROL AS-FUEL RATIO  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01620134
 

110-2326: GOVERNOR GP-UNIT INJECTOR

110-2326 GOVERNOR GP-UNIT INJECTOR
S/N 98Z1135-UP
PART OF 110-2397 GOVERNOR GP-UNIT INJECTOR
Type 2
i00494595 KEBP0162
1102326 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7323 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1441 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7E-0155 [1] SCREEN AS-FUEL  
7. 4P-5746 [1] CONTROL AS-FUEL RATIO  
  6I-1564 [1] DIAPHRAGM  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
8. 4P-6493 [1] PLATE-INFORMATION (GOVERNOR)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01620135
 

110-2397: GOVERNOR GP-UNIT INJECTOR

110-2397 GOVERNOR GP-UNIT INJECTOR
S/N 98Z1135-16275
PART OF 105-4404 ENGINE AR
i00494636 KEBP0162
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  110-2326 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01620136
 

129-1213: GOVERNOR GP-UNIT INJECTOR

129-1213 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16276-UP
PART OF 133-4245, 159-5999 ENGINE AR
i00541732 KEBP0162
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  131-7899 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01620137
 

130-7323: GOVERNOR GP-UNIT INJECTOR

130-7323 GOVERNOR GP-UNIT INJECTOR
S/N 98Z1135-UP
PART OF 110-2326, 131-7899 GOVERNOR GP-UNIT INJECTOR
i00195729 KEBP0162
1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
15A. Z [1] PIN  
15B. Z [2] SWIVEL  
16. 7W-5594 [1] SHAFT AS-PIVOT  
16A. Z [1] PIN  
17. 7E-3216 [1] BLOCK AS-BEARING  
17A. 6F-5933 [2] BEARING AS-NEEDLE  
18. 7E-3217 [1] LEVER AS  
18A. Z [1] SWIVEL  
19. 4P-8948 [1] SEAT AS-SPRING  
19A. Z [1] INSERT  
20. 7C-3776 [1] PISTON AS  
20A. 4N-6407 [1] SPOOL-DASHPOT  
20B. 4N-6406 [1] RING-SPACER  
20C. 4N-6404 [1] RING-RETAINING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7W-5591 [1] SEAT-GOVERNOR SPRING  
26. 7C-5883 B [7] SHIM (0.25-MM THK)  
27. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
28. 4P-4000 [1] SPRING-LEVER  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 130-7322 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 5C-8312 M [1] NUT (M4X0.7-THD)  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP01620138
 

131-7899: GOVERNOR GP-UNIT INJECTOR

131-7899 GOVERNOR GP-UNIT INJECTOR
S/N 98Z21597-UP
PART OF 129-1213 GOVERNOR GP-UNIT INJECTOR
i00649949 KEBP0162
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  130-7323 Y [1] GOVERNOR GP-UNIT INJECTOR  
  131-7889 [1] CAM-TORQUE  
  4P-5745 [1] CONTROL AS-FUEL RATIO  
  7C-5989 [1] PLATE-GOVERNOR INFORMATION  
  4P-6493 [1] PLATE-INFORMATION (GOVERNOR)  
  4P-2467 [1] SPRING GP-GOVERNOR  
  7C-4466 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01620139
 

6I-4267: GOVERNOR GP-UNIT INJECTOR

6I-4267 GOVERNOR GP-UNIT INJECTOR
S/N 98Z1135-UP
PART OF 110-2326 GOVERNOR GP-UNIT INJECTOR
i00157906 KEBP0162
6I4267 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your BG-245C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. 8C-5899 [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
41. 7W-6104 [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog BG-245C :

DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
TURBOCHARGER GP
124-9340 TURBOCHARGER GP
TURBOCHARGER GP
119-3084 TURBOCHARGER GP
TURBOCHARGER GP
115-5856 TURBOCHARGER GP
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
9Y-0283 FITTING GP-FUEL LINES
GOVERNOR GP-UNIT INJECTOR
110-2326 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
110-2326 GOVERNOR GP-UNIT INJECTOR
110-2397 GOVERNOR GP-UNIT INJECTOR
129-1213 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
131-7899 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.