AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

102-2703 ADJUSTER GP-HEIGHT -MANUAL PART OF 8I-0257 ADJUSTER GP-HEIGHT 10-20B ASPHALT SCREED


CONTROLS
ADJUSTER GP
CROWN GP
CONTROL GP-THICKNESS

ASPHALT SCREED 10-20B ASPHALT SCREED 2LN
 10-20B EXTEND-A-MAT Screed 2LN00001-UP KEBP0174 10-20B 2LN   (1996)

CONTROLS

ADJUSTER GP
ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
112-3471 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
112-3471 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
112-3471 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
8I-0257 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
8I-0732 ADJUSTER GP-HEIGHT
 

#KEBP01740010
 

102-2703: ADJUSTER GP-HEIGHT

102-2703 ADJUSTER GP-HEIGHT -MANUAL
PART OF 8I-0257 ADJUSTER GP-HEIGHT
i00465645 KEBP0174
1022703 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 163-5736 [1] SCREW-LIFTING  
3. 107-0247 [1] GEAR-WORM  
4. 3P-8680 [2] CUP-BEARING  
5. 187-5527 [1] HOUSING  
6. 107-0250 [1] GUIDE-BUSHING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 163-5737 [1] PIPE  
9. 2D-6398 [2] RING-RETAINING  
10. 8L-4070 [2] BALL BEARING  
11. 7T-9831 [2] CONE-BEARING  
12. 112-2181 [1] WORM  
13. 142-6282 [1] CAP  
   
  8T-5069 F [4] SETSCREW-SOCKET (10-24X0.25-IN)  
  F   NOT SHOWN
 

#KEBP01740011
 

112-3471: ADJUSTER GP-HEIGHT

112-3471 ADJUSTER GP-HEIGHT -POWER
Type 1
AN ATTACHMENT
i00489500 KEBP0174
1123471 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-0336 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0736 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER HEIGHT)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 105-6610 [4] WIRE AS  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740012
 

112-3471: ADJUSTER GP-HEIGHT

112-3471 ADJUSTER GP-HEIGHT -POWER
Type 2
AN ATTACHMENT
i01091587 KEBP0174
1123471 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3729 CY [2] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0736 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER HEIGHT)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 105-6610 [4] WIRE AS  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740013
 

112-3471: ADJUSTER GP-HEIGHT

112-3471 ADJUSTER GP-HEIGHT -POWER
Type 3
AN ATTACHMENT
i02395145 KEBP0174
1123471 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-2006 CY [2] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0736 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER HEIGHT)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 105-6610 [4] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740014
 

8I-0257: ADJUSTER GP-HEIGHT

8I-0257 ADJUSTER GP-HEIGHT -MANUAL
PART OF 112-3475, 112-3476 SCREED AR
i00423720 KEBP0174
8I0257 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0258 [1] PLATE AS (RH)  
2. 8I-0259 [1] PLATE AS (LH)  
    (EACH PLATE AS INCLUDES)
  5E-9146 E CHANNEL (20-CM)  
  7T-1099 [1] LINK  
3. 8I-0273 [2] PLATE-BOTTOM  
4. 8T-9393 [18] BOLT (5/8-11X1.5-IN)  
5. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
6. 253-8866 [8] PIN-SPRING  
7. 5J-3941 [8] PIN-SPRING  
8. 8I-0261 [1] FRAME AS (RH)  
9. 8I-0262 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
  7T-1099 [2] LINK  
10. 8T-6871 [2] BOLT (5/8-11X2.5-IN)  
11. 1D-5118 [2] NUT-JAM (5/8-11-THD)  
12. 354-6744 [4] TUBE AS  
13. 8I-0256 [8] BUSHING  
14. 8I-0267 [4] CAP  
15. 4L-6454 [8] BOLT (3/8-16X1-IN)  
16. 8T-4896 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 107-6186 [2] GAUGE (EXTENDER INDICATOR)  
18. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
19. 8I-0272 [2] POINTER  
20. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
21. 102-2703 Y [2] ADJUSTER GP-HEIGHT (MANUAL)  
22. 5S-7383 [4] BOLT (3/8-16X1.75-IN)  
23. 6V-8801 [4] NUT (3/8-16-THD)  
24. 102-2733 [2] CLEVIS  
25. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
26. 102-2704 [2] BOLT-SPECIAL  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 6V-8189 [2] NUT (5/16-18-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740015
 

8I-0732: ADJUSTER GP-HEIGHT

8I-0732 ADJUSTER GP-HEIGHT -MANUAL
AN ATTACHMENT
i00540771 KEBP0174
8I0732 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8177 [1] LOCKOUT  
2. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
3. 8I-0260 [2] WHEEL AS  
4. 8T-7566 [2] PIN-SPRING  
5. 102-2714 [2] HANDLE  
6. 8I-0279 [2] SHAFT-EXTENSION  
7. 8I-0923 [2] COUPLING  
8. 102-2739 [4] KEY-SQUARE  
9. 102-2701 [2] BEARING  
10. 8T-8908 [6] BOLT (1/4-20X1-IN)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 6V-8185 [4] NUT (1/4-20-THD)  
13. 276-2521 [1] MOUNT AS (RH)  
14. 8I-0286 [1] MOUNT AS (LH)  
15. 4L-6454 [4] BOLT (3/8-16X1-IN)  
16. 6V-8801 [4] NUT (3/8-16-THD)  
17. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5S-7349 [2] BOLT (1/4-20X0.5-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01740016
 

197-9844: CHAIN GP-SCREED

197-9844 CHAIN GP-SCREED
S/N 2MN3539-UP
PART OF 276-4590 CROWN GP-POWER
i01489835 KEBP0174
1979844 CHAIN GP-SCREED Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2687 [1] LINK-CONNECTING  
2. 195-9533 [1] LINK-OFFSET  
 

#KEBP01740017
 

8I-0337: CONTROL GP-THICKNESS

8I-0337 CONTROL GP-THICKNESS -CLOCKWISE
AN ATTACHMENT
i00423736 KEBP0174
8I0337 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0899 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0905 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01740018
 

8I-0338: CONTROL GP-THICKNESS

8I-0338 CONTROL GP-THICKNESS -COUNTERCLOCKWISE
AN ATTACHMENT
i00423741 KEBP0174
8I0338 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0898 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0906 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0910 [2] FILM-INSTRUCTION (MAT THICKNESS, CCW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01740019
 

8I-0339: CONTROL GP-THICKNESS

8I-0339 CONTROL GP-THICKNESS -CLOCKWISE ACME
AN ATTACHMENT
i00423745 KEBP0174
8I0339 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0900 [2] TRUNNION  
2. 8I-0902 [8] SPACER (0.75X1.50X1-IN THK)  
3. 1A-0075 [8] BOLT (3/4-16X1.75-IN)  
4. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
5. 8I-0903 [2] BLOCK-BEARING  
6. 3P-8680 [4] CUP-BEARING  
7. 3P-8681 [4] CONE-BEARING  
8. 8I-0364 [2] ROD  
9. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
10. 135-8177 [2] LOCKOUT  
11. 8T-8908 [2] BOLT (1/4-20X1-IN)  
12. 8I-0904 [2] SCALE-THICKNESS  
13. 8I-0358 [2] POINTER  
14. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
15. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8I-0907 [2] SHAFT AS  
17. 8I-0911 [2] KNOB  
18. 1D-6306 [4] NUT (1-8-THD)  
19. 8I-0352 [2] HANDLE AS  
20. 1J-8136 [2] PIN-SPRING  
21. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
22. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
23. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
24. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

Information:

Operation and Maintenance Manual
Height Adjuster Control
8-16B, 10-20B and 10-20WB Extend-A-Mat© Screed
Height Adjuster - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat© Screed
Special Instruction
Installation Procedure for the Bushings on the Height Adjusters and on the Extenders{5639}
Installation Procedure for the Bushings on the Height Adjusters and on the Extenders{5639}
Specifications
Sloper Gearmotor
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Power Crown Gearmotor
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Extender Height Gearmotor
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Disassembly and Assembly
Extender Height Adjuster Group
8-16B, 10-20B, & 10-20WB EXTEND-A-MAT SCREED
Height Adjuster
8-16B, 10-20B, & 10-20WB EXTEND-A-MAT SCREED
Sloper & Height Group Motors
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Extender Height Adjuster Group
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Height Adjuster
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Thickness Control Assembly
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Service Magazine
New Crank Assembly is now Available {5639, 5641, 6640}
2000/05/22
Periodic Maintenance is Required for the Screed Extensions {5639, 5641, 6640, 7051}
2003/02/24
Special Instruction, REHS1612, "Installation Procedure for the Bushings on the Height Adjusters and on the Extenders" is Available {5639}
2003/03/17
A Epoxy Repair Procedure for the Bushings on the Screed is Now Available for Asphalt Pavers and Asphalt Screeds {5639}
2007/09/24

Caterpillar Parts SIS Catalog 10-20B :

LINES GP-BURNER
8I-0658 LINES GP-BURNER
LINES GP-BURNER
8I-0658 LINES GP-BURNER
LINES GP-BURNER
143-3339 LINES GP-BURNER
BURNER GP
112-3465 BURNER GP
BURNER GP
112-3465 BURNER GP
BURNER GP
112-3465 BURNER GP
BURNER GP
112-3465 BURNER GP
112-3476 SCREED AR
ADJUSTER GP-HEIGHT
112-3471 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
112-3471 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
112-3471 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
8I-0257 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
8I-0732 ADJUSTER GP-HEIGHT
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
CONTROL GP-THICKNESS
8I-0337 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0338 CONTROL GP-THICKNESS

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.