AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

109-7038 MOTOR GP-POWER ADJUSTER 24-VOLT PART OF 112-3470 SLOPER GP-POWER AN ATTACHMENT 10-20B ASPHALT SCREED


CONTROLS
MOTOR GP-POWER ADJUSTER
CROWN GP
SLOPER GP

ASPHALT SCREED 10-20B ASPHALT SCREED 2LN
 10-20B EXTEND-A-MAT Screed 2LN00001-UP KEBP0174 10-20B 2LN   (1996)

CONTROLS

MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
109-0336 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
109-7038 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2005 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
 

#KEBP01740030
 

109-7038: MOTOR GP-POWER ADJUSTER

109-7038 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3470 SLOPER GP-POWER
AN ATTACHMENT
i00492545 KEBP0174
1097038 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-3685 [2] BUSHING-BRONZE  
2. 123-3683 [2] BUSHING-BRONZE  
3. 107-2075 [1] GEAR  
4. 107-2074 [1] LIMITER-TORQUE  
5. 123-3686 [1] SHAFT-IDLER  
6. 7M-7193 [1] RACE-THRUST BEARING  
7. 4L-1250 [2] LOCKNUT (10-32-THD)  
8. 8F-1434 [2] LOCKWASHER  
9. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
10. 122-8707 [8] SCREW-HEX (10-16X1-IN)  
11. 123-3682 [1] ELECTRIC MOTOR  
12. 107-0111 [1] PIN-GROOVED  
13. 107-2073 [1] GASKET  
14. 123-3684 [2] BUSHING-BRONZE  
15. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 9X-1813 E SLEEVE (23-CM)  
   
  9W-0852 F [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
 

#KEBP01740031
 

165-3728: MOTOR GP-POWER ADJUSTER

165-3728 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3470 SLOPER GP-POWER
Type 1
AN ATTACHMENT
i01159590 KEBP0174
1653728 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6592 [1] MOTOR AS  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 171-3715 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 123-3683 [2] BUSHING-BRONZE  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 107-2074 [1] LIMITER-TORQUE  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 9X-1813 E SLEEVE (23-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01740032
 

165-3728: MOTOR GP-POWER ADJUSTER

165-3728 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3470 SLOPER GP-POWER
Type 2
AN ATTACHMENT
i02198448 KEBP0174
1653728 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 171-3715 [1] SHAFT-IDLER  
8. 1L-0834 B [1] BEARING AS-NEEDLE (1/2IN SHAFT)  
9. 123-3683 [1] BUSHING-BRONZE  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7899 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 [1] RACE-THRUST BEARING  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01740033
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
Type 1
AN ATTACHMENT
i01159640 KEBP0174
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6592 [1] MOTOR AS  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 171-3714 [1] LIMITER-TORQUE  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 9X-1813 E SLEEVE (23-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01740034
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
Type 2
AN ATTACHMENT
i02198331 KEBP0174
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7897 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 B [1] RACE-THRUST BEARING (1/2IN SHAFT)  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP01740035
 

277-2004: MOTOR GP-POWER ADJUSTER

277-2004 MOTOR GP-POWER ADJUSTER -ACTUATED
S/N 2MN3539-UP
24-VOLT
PART OF 276-4590 CROWN GP-POWER
i02513610 KEBP0174
2772004 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 277-2002 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, HOUSING COVER, REAR HOUSING & TORQUE LIMITER)
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE  
24. 6L-4082 [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP01740036
 

277-2005: MOTOR GP-POWER ADJUSTER

277-2005 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 230-6381 SLOPER GP-POWER
AN ATTACHMENT
i02462100 KEBP0174
2772005 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 171-3715 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (48-CM)  
17. 153-6440 L TUBE (3-DM)  
18. 277-2003 J [1] KIT-GEARBOX  
    (INCLUDES HOUSING COVER, BUSHINGS, WASHER, REAR HOUSING, TORQUE LIMITER & PARTS MARKED J)
19. 6L-4082 [1] RACE-THRUST BEARING  
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#KEBP01740037
 

277-2006: MOTOR GP-POWER ADJUSTER

277-2006 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
AN ATTACHMENT
i02453264 KEBP0174
2772006 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 272-7281 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, TORQUE LIMITER, HOUSING COVER & REAR HOUSING)
20. 311-8715 J [1] WASHER (5X11X1-MM THK)  
21. 311-8716 J [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 J [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 J [1] BUSHING-BRONZE  
24. 6L-4082 J [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP01740038
 

282-7961: SHAFT GP-DRIVE

282-7961 SHAFT GP-DRIVE -NON-ACTUATED
S/N 2MN3539-UP
PART OF 288-7306 CROWN GP, 276-4590 CROWN GP-POWER
i02513612 KEBP0174
2827961 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 282-7963 [1] SPINDLE AS  
 

#KEBP01740039
 

8I-0214: SLOPER GP-MANUAL

8I-0214 SLOPER GP-MANUAL
PART OF 112-3475, 112-3476 SCREED AR
i00423717 KEBP0174
8I0214 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-4974 [1] FRAME AS (RH)  
  246-4975 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
1A. 246-5104 [4] BUSHING  
2. 106-6322 [1] SUPPORT AS (LH)  
3. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
4. 8I-0218 [2] PIN AS-PIVOT  
5. 065-7893 [2] LOCKWASHER-BEARING  
6. 2H-3778 [4] LOCKNUT  
7. 8I-0217 [2] PIN AS-ACTUATOR  
8. 102-2700 [2] ROD END  
9. 102-2699 Y [2] JACK GP-SLOPER  
10. 8I-0219 [2] SUPPORT AS  
11. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
12. 8I-0248 [2] SCALE-SLOPER  
13. 8I-0234 [2] POINTER  
14. 8I-0221 [1] CARRIER AS (RH)  
15. 8I-0249 [1] CHANNEL  
16. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
17. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
18. 4L-6454 [9] BOLT (3/8-16X1-IN)  
19. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
20. 8T-4896 [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 6V-8801 [8] NUT (3/8-16-THD)  
22. 253-9037 [4] BOLT (3/4-16X1.75-IN)  
23. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
24. 7X-0445 [2] BOLT (1-1/4-7X5-IN)  
25. 7X-0633 [4] WASHER (34X64.5X4-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Sloper Gearmotor
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Power Crown Gearmotor
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Extender Height Gearmotor
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Disassembly and Assembly
Sloper & Height Group Motors
8-16B, 10-20B, & 10-20WB EXTEND-A-MAT SCREED
Service Magazine
A New Power Adjuster Motor is Now Used on the Asphalt Screeds {5639}
2005/12/26
A Epoxy Repair Procedure for the Bushings on the Screed is Now Available for Asphalt Pavers and Asphalt Screeds {5639}
2007/09/24

Caterpillar Parts SIS Catalog 10-20B :

MOTOR GP-POWER ADJUSTER
109-0336 MOTOR GP-POWER ADJUSTER
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
CROWN GP-POWER
276-4590 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP-MANUAL
120-5898 CROWN GP-MANUAL
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2005 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.