AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8I-0730 SLOPER GP-MANUAL S/N 2LN3052-UP; 2MN3504-UP AN ATTACHMENT 10-20B ASPHALT SCREED


CONTROLS
SLOPER GP
ELECTRICAL SYSTEM
BOX GP

ASPHALT SCREED 10-20B ASPHALT SCREED 2LN
 10-20B EXTEND-A-MAT Screed 2LN00001-UP KEBP0174 10-20B 2LN   (1996)

CONTROLS

SLOPER GP
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL
SLOPER GP-MANUAL
8I-0730 SLOPER GP-MANUAL
SLOPER GP-POWER
112-3470 SLOPER GP-POWER
SLOPER GP-POWER
112-3470 SLOPER GP-POWER
SLOPER GP-POWER
230-6381 SLOPER GP-POWER
 

#KEBP01740040
 

8I-0730: SLOPER GP-MANUAL

8I-0730 SLOPER GP-MANUAL
S/N 2LN3052-UP; 2MN3504-UP
AN ATTACHMENT
i00424243 KEBP0174
8I0730 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0220 [2] SUPPORT AS  
2. 135-8177 [2] LOCKOUT  
3. 8T-8908 [6] BOLT (1/4-20X1-IN)  
4. 8I-0260 [2] WHEEL AS  
5. 102-2714 [2] HANDLE  
6. 8T-7566 [2] PIN-SPRING  
7. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 5S-7349 [2] BOLT (1/4-20X0.5-IN)  
9. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01740041
 

112-3470: SLOPER GP-POWER

112-3470 SLOPER GP-POWER
Type 1
AN ATTACHMENT
i00489497 KEBP0174
1123470 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-7038 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0742 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER SLOPE)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 114-2384 [2] WIRE AS  
10. 105-6610 [4] WIRE AS  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740042
 

112-3470: SLOPER GP-POWER

112-3470 SLOPER GP-POWER
Type 2
AN ATTACHMENT
i01091552 KEBP0174
1123470 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3728 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0742 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER SLOPE)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 114-2384 [2] WIRE AS  
10. 105-6610 [4] WIRE AS  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740043
 

230-6381: SLOPER GP-POWER

230-6381 SLOPER GP-POWER
AN ATTACHMENT
i02395269 KEBP0174
2306381 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-2005 CY [2] MOTOR GP-POWER ADJUSTER (24 V)  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 222-5881 [2] BRACKET AS  
5. 102-2739 [2] KEY-SQUARE  
6. 222-5883 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER SLOPE)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 114-2383 [2] WIRE AS  
9. 114-2384 [2] WIRE AS  
10. 105-6610 [4] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740044
 

116-4490: BOX GP-EXTENSION

116-4490 BOX GP-EXTENSION
PART OF 111-8848, 146-7439 WIRING GP-SCREED
ALSO AN ATTACHMENT
i00483454 KEBP0174
1164490 BOX GP-EXTENSION Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-6854 [1] BOX-EXTENSION  
2. 116-4603 [1] PLATE  
3. 246-8912 [1] SWITCH GP-TOGGLE (FEEDER CONTROL)  
3A. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
3B. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
3C. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
4. 106-3448 [1] HARNESS AS-SCREED (EXTENDER)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-4814 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  2L-8074 [5] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  5P-2321 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
5. 6V-2480 [4] SCREW (4-40X0.5-IN)  
6. 092-4917 [4] WASHER (3.2X14X0.5-MM THK)  
7. 6B-4540 [4] NUT (4-40-THD)  
8. 246-8912 [1] SWITCH GP-TOGGLE (EXTENDER WIDTH)  
8A. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
8B. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
8C. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
  D   ORDER BY THE METER
 

#KEBP01740045
 

111-7544: BOX GP-SCREED CONTROL

111-7544 BOX GP-SCREED CONTROL
PART OF 111-8848 WIRING GP-SCREED
i00482918 KEBP0174
1117544 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-4019 [1] BOX (LH)  
2. 109-8136 [1] PLATE  
3. 111-7208 [1] PLATE (LH)  
4. 3E-6477 [1] RELAY AS (24-VOLT)  
5. 2W-6832 [1] SWITCH AS (BURNER MAIN GLOW)  
6. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
7. 122-9303 Y [1] BUFFER GP-SENSOR (500-HZ PWM)  
8. 9G-0011 [1] SWITCH AS-TOGGLE (FEEDER GAIN)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
9. 105-8035 [2] WIRE AS  
10. 3V-4694 [2] PLUG-BUTTON  
11. 116-4331 [1] HARNESS AS  
12. 105-5098 [1] RESISTOR  
13. 105-5099 [1] BRACKET AS-MOUNTING  
14. 2N-3479 [2] SCREW (10-24X0.5-IN)  
15. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
16. 7S-1197 [1] SCREW-MACHINE (8-32X0.5-IN)  
17. 9X-6257 [4] SCREW-MACHINE (6-32X0.625-IN)  
18. 4B-4274 [10] WASHER (5.5X13X1.2-MM THK)  
19. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
20. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
21. 6D-5801 [1] LOCKNUT (8-32-THD)  
22. 7D-6922 [4] LOCKNUT (6-32-THD)  
23. 031-0249 [2] LOCKNUT (10-24-THD)  
24. 4S-4455 [1] CLIP  
25. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 3E-9860 [1] LOCKNUT (5/16-18-THD)  
28. 134-6048 [1] POTENTIOMETER AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
29. 1P-6509 [1] KNOB  
30. 7C-4550 [1] SEAL (ROTATING SHAFT)  
31. 9G-0011 [1] SWITCH AS-TOGGLE (TOW POINT)  
32. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER WIDTH)  
    (EACH AS. INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
33. 2W-6832 [1] SWITCH AS (BURNER EXTENDER GLOW)  
34. 134-6065 [1] WIRE AS  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740046
 

111-7545: BOX GP-SCREED CONTROL

111-7545 BOX GP-SCREED CONTROL -RH
PART OF 111-8848 WIRING GP-SCREED
ALSO AN ATTACHMENT
i00482923 KEBP0174
1117545 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-4020 [1] BOX  
2. 104-4714 [1] PLATE  
3. 111-7209 [1] PLATE (RH)  
4. 3E-6477 [1] RELAY AS (24-VOLT)  
  7T-6365 [1] HOUSING-RECEPTACLE  
5. 112-7483 [1] RELAY-TIME DELAY  
6. 1V-6652 [1] SWITCH AS-TOGGLE (SPRAY DOWN PUMP)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
7. 2W-6832 [1] SWITCH AS (BURNER GLOW EXTENDER)  
8. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
9. 4D-1836 [1] SWITCH-TOGGLE (VIBRATOR ON/OFF)  
10. 3V-4694 [3] PLUG-BUTTON  
11. 134-6065 [1] WIRE AS  
12. 9D-3127 [1] BASE AS-INDICATOR LIGHT  
  6V-8367 [1] LOCKWASHER  
  6V-8382 [1] NUT-HEX (11/16-27-THD)  
13. 9D-2868 [1] LENS-RED  
14. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
15. 116-4332 [1] HARNESS AS  
16. 105-8035 [2] WIRE AS  
17. 117-5885 [1] WIRE AS  
18. 2W-6832 [1] SWITCH AS (BURNER MAIN GLOW)  
19. 122-9303 Y [1] BUFFER GP-SENSOR (500-HZ PWM)  
20. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
21. 6V-7697 [2] SCREW-MACHINE (8-32X1.25-IN)  
22. 7S-1197 [1] SCREW-MACHINE (8-32X0.5-IN)  
23. 9X-6257 [4] SCREW-MACHINE (6-32X0.625-IN)  
24. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
25. 4B-4863 [3] WASHER (4.7X11X1.2-MM THK)  
26. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
27. 6D-5801 [3] LOCKNUT (8-32-THD)  
28. 7D-6922 [4] LOCKNUT (6-32-THD)  
29. 4S-4455 [1] CLIP  
30. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
31. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
32. 3E-9860 [1] LOCKNUT (5/16-18-THD)  
33. 134-6048 [1] POTENTIOMETER AS  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
34. 1P-6509 [1] KNOB  
  7C-4550 [1] SEAL (ROTATING SHAFT)  
35. 9G-0011 [1] SWITCH AS-TOGGLE (TOW POINT)  
36. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER WIDTH)  
37. 9G-0011 [1] SWITCH AS-TOGGLE (FEEDER GATES)  
    (EACH GP INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740047
 

144-3499: BOX GP-SCREED CONTROL

144-3499 BOX GP-SCREED CONTROL -LH
S/N 2LN3053-UP; 2MN3504-UP
PART OF 111-8848 WIRING GP-SCREED
ALSO AN ATTACHMENT
i00607905 KEBP0174
1443499 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-4019 [1] BOX (LH)  
2. 109-8136 [1] PLATE  
3. 111-7208 [1] PLATE (LH)  
4. 3E-6477 [1] RELAY AS (24-VOLT)  
5. 2W-6832 [1] SWITCH AS (BURNER MAIN GLOW)  
6. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
7. 122-9303 Y [1] BUFFER GP-SENSOR (500-HZ PWM)  
8. 7C-4550 [1] SEAL (ROTATING SHAFT)  
9. 105-8035 [2] WIRE AS  
10. 3V-4694 [2] PLUG-BUTTON  
11. 116-4331 [1] HARNESS AS  
  135-3477 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  3T-0204 [1] RECEPTACLE AS-CONNECTOR (20-PIN)  
  7G-7917 [7] PLUG-SEAL  
  7G-7918 [1] PLUG-SEAL  
  7G-7920 [1] PLUG-SEAL  
  7G-8237 [1] RECEPTACLE AS  
  8N-1530 [1] RECEPTACLE AS (12-PIN)  
  8N-1537 [3] LOCKWASHER  
  8T-8737 [1] PLUG-SEAL  
  111-6795 [1] HOUSING-RELAY  
  111-6816 [1] LOCK  
12. 5P-9799 D TUBE (HEAT SHRINK)(.1M)  
13. 134-6065 [1] WIRE AS  
14. 2N-3478 [1] SCREW-MACHINE (10-24X0.375-IN)  
15. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
16. 7S-1197 [1] SCREW-MACHINE (8-32X0.5-IN)  
17. 9X-6257 [4] SCREW-MACHINE (6-32X0.625-IN)  
18. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
19. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
20. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
21. 6D-5801 [1] LOCKNUT (8-32-THD)  
22. 7D-6922 [4] LOCKNUT (6-32-THD)  
23. 031-0249 [1] LOCKNUT (10-24-THD)  
24. 4S-4455 [1] CLIP  
25. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 3E-9860 [1] LOCKNUT (5/16-18-THD)  
28. 134-6048 [1] POTENTIOMETER AS  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
29. 1P-6509 [1] KNOB  
30. 9G-0011 [1] SWITCH AS-TOGGLE (FEEDER GAIN)  
31. 9G-0011 [1] SWITCH AS-TOGGLE (TOW POINT)  
32. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER WIDTH)  
    (EACH GP INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
33. 2W-6832 [1] SWITCH AS (BURNER GLOW EXTENDER)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740048
 

146-8176: BOX GP-SCREED CONTROL

146-8176 BOX GP-SCREED CONTROL -LH
S/N 2LN1-UP
PART OF 146-7439 WIRING GP-SCREED
AN ATTACHMENT
i00680241 KEBP0174
1468176 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-2395 [1] BOX (LH)  
2. 109-8136 [1] PLATE  
3. 111-7208 [1] PLATE (LH)  
4. 3E-6477 [1] RELAY AS (24-VOLT)  
5. 7N-8008 [1] SWITCH AS-TOGGLE (EXTENDER HEIGHT)  
6. 7N-8008 [1] SWITCH AS-TOGGLE (EXTENDER SLOPE)  
    (EACH GP INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
7. 122-9303 Y [1] BUFFER GP-SENSOR (500-HZ PWM)  
8. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
9. 3V-4694 [2] PLUG-BUTTON  
10. 146-8177 [1] HARNESS AS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  3T-3410 [1] RECEPTACLE AS-CONNECTOR (37-PIN)  
  7G-7917 [13] PLUG-SEAL  
  8N-1523 [1] LOCKWASHER  
  8N-1534 [1] RECEPTACLE AS-CONNECTOR (20-PIN)  
  8N-1537 [1] LOCKWASHER  
  8T-8737 [1] PLUG-SEAL  
  111-6795 [1] HOUSING-RELAY  
  111-6816 [1] LOCK  
  135-3477 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
11. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
12. 7S-1197 [1] SCREW-MACHINE (8-32X0.5-IN)  
13. 9X-6257 [4] SCREW-MACHINE (6-32X0.625-IN)  
14. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
15. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
16. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
17. 6D-5801 [1] LOCKNUT (8-32-THD)  
18. 7D-6922 [4] LOCKNUT (6-32-THD)  
19. 4S-4455 [1] CLIP  
20. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
21. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
22. 3E-9860 [1] LOCKNUT (5/16-18-THD)  
23. 134-6048 [1] POTENTIOMETER AS  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
24. 1P-6509 [1] KNOB  
25. 7C-4550 [1] SEAL (ROTATING SHAFT)  
26. 9G-0011 [1] SWITCH AS-TOGGLE (TOW POINT JOG)  
27. 9G-0011 [1] SWITCH AS-TOGGLE (FEEDER AUTO/MANUAL)  
28. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER WIDTH)  
    (EACH GP INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740049
 

146-8481: BOX GP-SCREED CONTROL

146-8481 BOX GP-SCREED CONTROL -RH
S/N 2LN1-UP
PART OF 146-7439 WIRING GP-SCREED
AN ATTACHMENT
i00679119 KEBP0174
1468481 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-2396 [1] BOX  
2. 104-4714 [1] PLATE  
3. 111-7209 [1] PLATE (RH)  
4. 3E-6477 [2] RELAY AS (24-VOLT)  
5. 1V-6652 [1] SWITCH AS-TOGGLE (SPRAYDOWN)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
6. 7N-8008 [1] SWITCH AS-TOGGLE (CROWN)  
7. 7N-8008 [1] SWITCH AS-TOGGLE (EXTENDER HEIGHT)  
8. 7N-8008 [1] SWITCH AS-TOGGLE (EXTENDER SLOPE)  
    (EACH GP INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
9. 3V-4694 [2] PLUG-BUTTON  
10. 4D-1836 [1] SWITCH-TOGGLE (VIBRATOR ON/OFF)  
11. 129-1907 [1] PLUG-BUTTON  
12. 146-8480 [1] HARNESS AS  
13. 122-9303 Y [1] BUFFER GP-SENSOR (500-HZ PWM)  
14. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
15. 7S-1197 [2] SCREW-MACHINE (8-32X0.5-IN)  
16. 9X-6257 [4] SCREW-MACHINE (6-32X0.625-IN)  
17. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
18. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
19. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
20. 6D-5801 [2] LOCKNUT (8-32-THD)  
21. 7D-6922 [4] LOCKNUT (6-32-THD)  
22. 4S-4455 [1] CLIP  
23. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
24. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
25. 3E-9860 [1] LOCKNUT (5/16-18-THD)  
26. 134-6048 [1] POTENTIOMETER AS (MIX HEIGHT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
27. 1P-6509 [1] KNOB  
28. 7C-4550 [1] SEAL (ROTATING SHAFT)  
29. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
30. 9G-0011 [1] SWITCH AS-TOGGLE (TOW POINT JOG)  
31. 9G-0011 [1] SWITCH AS-TOGGLE (FEEDER AUTO/MANUAL)  
32. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER WIDTH)  
    (EACH GP INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Sloper Jack - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat© Screed
Special Instruction
Installation Procedure for the Bushings on the Height Adjusters and on the Extenders{5639}
Installation Procedure for the Bushings on the Height Adjusters and on the Extenders{5639}
Specifications
Sloper Gearmotor
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Disassembly and Assembly
Sloper Group
8-16B, 10-20B, & 10-20WB EXTEND-A-MAT SCREED
Sloper & Height Group Motors
8-16B, 10-20B, & 10-20WB EXTEND-A-MAT SCREED
Sloper Group
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Sloper & Height Group Motors
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Extender Height Adjuster Group
8-16B,10-20B, & 10-20WB EXTEND-A-MAT SCREED
Service Magazine
A New Service Tool is Available for the Pivot Pin Assembly in the Screed Extension Slope Control {5639}
2000/05/01
Epoxy Cement Is Available For The Bushings In The Screeds {5639}
2000/09/11
Special Instruction, REHS1612, "Installation Procedure for the Bushings on the Height Adjusters and on the Extenders" is Available {5639}
2003/03/17

Caterpillar Parts SIS Catalog 10-20B :

SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2005 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
SLOPER GP-POWER
112-3470 SLOPER GP-POWER
SLOPER GP-POWER
112-3470 SLOPER GP-POWER
SLOPER GP-POWER
230-6381 SLOPER GP-POWER
BOX GP-EXTENSION
116-4490 BOX GP-EXTENSION
BOX GP-SCREED CONTROL
111-7544 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
111-7545 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
144-3499 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
146-8176 BOX GP-SCREED CONTROL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.