AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

149-2997 CONTROL AR-AUTOMATIC BURNER S/N 2LN1-UP AN ATTACHMENT 10-20B ASPHALT SCREED


ELECTRICAL SYSTEM
CONTROL GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
CONTROL GP-UNPROGRAMMED
HEATER GP
WIRING GP

ASPHALT SCREED 10-20B ASPHALT SCREED 2LN
 10-20B EXTEND-A-MAT Screed 2LN00001-UP KEBP0174 10-20B 2LN   (1996)

ELECTRICAL SYSTEM

CONTROL GP
BOX GP-SCREED CONTROL
111-7544 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
111-7545 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
144-3499 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
146-8176 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
146-8481 BOX GP-SCREED CONTROL
149-2997 CONTROL AR-AUTOMATIC BURNER
149-2995 CONTROL AR-MANUAL BURNER
CONTROL GP-BURNER
146-8906 CONTROL GP-BURNER
CONTROL GP-BURNER ELECTRONIC
143-6447 CONTROL GP-BURNER ELECTRONIC
180-7979 CONTROL GP-BURNER ELECTRONIC
 

#KEBP01740050
 

149-2997: CONTROL AR-AUTOMATIC BURNER

149-2997 CONTROL AR-AUTOMATIC BURNER
S/N 2LN1-UP
AN ATTACHMENT
i00856705 KEBP0174
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  180-7979 Y [1] CONTROL GP-BURNER ELECTRONIC  
  143-3339 Y [1] LINES GP-BURNER  
  146-7439 Y [1] WIRING GP-SCREED  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740051
 

149-2995: CONTROL AR-MANUAL BURNER

149-2995 CONTROL AR-MANUAL BURNER
S/N 2LN1-UP
AN ATTACHMENT
i00981005 KEBP0174
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8I-0658 Y [1] LINES GP-BURNER (DIESEL HEAT)  
  111-8848 Y [1] WIRING GP-SCREED  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740052
 

146-8906: CONTROL GP-BURNER

146-8906 CONTROL GP-BURNER
S/N 2LN1-UP
PART OF 146-7439 WIRING GP-SCREED
AN ATTACHMENT
i00677510 KEBP0174
1468906 CONTROL GP-BURNER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-4843 [1] BOX AS  
2. 146-8908 [1] HARNESS AS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  7G-7917 [9] PLUG-SEAL  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  8N-1513 [1] RECEPTACLE AS-CONNECTOR (37-PIN)  
  8N-1523 [1] LOCKWASHER  
  8T-8737 [5] PLUG-SEAL  
  111-6795 [4] HOUSING-RELAY  
  111-6816 [4] LOCK  
3. 9D-3127 [1] BASE AS-INDICATOR LIGHT  
  6V-8367 [1] LOCKWASHER  
  6V-8382 [1] NUT-HEX (11/16-27-THD)  
4. 9D-2868 [1] LENS-RED  
5. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
6. 4D-1836 [1] SWITCH-TOGGLE (OPERATE/SERVICE)  
7. 9G-0011 [1] SWITCH AS-TOGGLE (INCR CLEAR/STORE)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
8. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
9. 146-8114 [1] PLUG AS-CODE  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
10. 2N-3479 [2] SCREW (10-24X0.5-IN)  
11. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
12. 031-0249 [2] LOCKNUT (10-24-THD)  
13. 143-4844 [1] BRACKET  
14. 6V-2480 [4] SCREW (4-40X0.5-IN)  
15. 9B-1117 [4] LOCKWASHER  
16. 6B-4540 [4] NUT (4-40-THD)  
17. 1S-9593 [10] STRAP-CABLE  
18. 3S-2093 [5] STRAP-CABLE  
19. 132-6646 [1] PLATE  
20. 167-1218 [1] FILM-INSTRUCTION  
21. 3E-6477 [4] RELAY AS (24-VOLT)  
22. 7S-1197 [4] SCREW-MACHINE (8-32X0.5-IN)  
23. 6D-5801 [4] LOCKNUT (8-32-THD)  
24. 077-4701 [1] SWITCH (RH EXT AUTO/MANUAL)  
25. 077-4701 [1] SWITCH (RH MAIN AUTO/MANUAL)  
26. 077-4701 [1] SWITCH (LH MAIN AUTO/MANUAL)  
27. 077-4701 [1] SWITCH (LH EXT AUTO/MANUAL)  
 

#KEBP01740053
 

143-6447: CONTROL GP-BURNER ELECTRONIC

143-6447 CONTROL GP-BURNER ELECTRONIC
S/N 2LN1-UP
PART OF 146-7439 WIRING GP-SCREED
AN ATTACHMENT
i00676951 KEBP0174
1436447 CONTROL GP-BURNER ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6703 M [2] KIT-RETAINING BOLT  
2. 7X-6315 [1] STRAP AS-GROUND  
3. 101-0852 [1] SCREW-PAN HEAD (8-32X0.375-IN)  
  M   METRIC PART
 

#KEBP01740054
 

180-7979: CONTROL GP-BURNER ELECTRONIC

180-7979 CONTROL GP-BURNER ELECTRONIC
S/N 2LN1-UP
PART OF 149-2997 CONTROL AR-AUTOMATIC BURNER
FIELD REPLACEMENT ORDER 1-187-2705 CONTROL GP-BURNER ELECTRONIC
AN ATTACHMENT
i01424361 KEBP0174
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  172-9391 Y [1] CONTROL GP-UNPROGRAMMED  
    (SOFTWARE ONLY)
    -OR-
  187-2703 [1] SOFTWARE GP (BURNER ELECTRONIC)  
    (OPTIONAL SERVICE REPLACEMENT)(INCLUDES MONITOR & SOFTWARE)
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01740055
 

143-2919: DETECTOR GP-FLAME

143-2919 DETECTOR GP-FLAME
S/N 2LN1-UP
PART OF 146-7439 WIRING GP-SCREED
AN ATTACHMENT
i01654396 KEBP0174
1432919 DETECTOR GP-FLAME Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 143-2920 [1] DETECTOR-FLAME  
4. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
5. 9X-1813 E SLEEVE (31CM)  
  E   ORDER BY THE CENTIMETER
 

#KEBP01740056
 

122-9303: BUFFER GP-SENSOR

122-9303 BUFFER GP-SENSOR -MATERIAL HEIGHT
PART OF 111-7544, 111-7545, 144-3499, 146-8176, 146-8481 BOX GP-SCREED CONTROL
ALSO AN ATTACHMENT
i00513178 KEBP0174
1229303 BUFFER GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] SENSOR AS-ELECTRONIC  
2. 9X-1813 E SLEEVE (19-CM EACH)  
3. 155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4. 186-3736 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
5. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  E   ORDER BY THE CENTIMETER
  Z   NOT SERVICED SEPARATELY
 

#KEBP01740057
 

172-9391: CONTROL GP-UNPROGRAMMED

172-9391 CONTROL GP-UNPROGRAMMED
S/N 2LN1-UP
IMPLEMENT
PART OF 180-7979 CONTROL GP-BURNER ELECTRONIC
AN ATTACHMENT
i01182156 KEBP0174
1729391 CONTROL GP-UNPROGRAMMED Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-6315 [1] STRAP AS-GROUND  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
2. 101-0852 [1] SCREW-PAN HEAD (8-32X0.375-IN)  
3. 6V-6703 M [2] KIT-RETAINING BOLT (UNPROGRAMMED CONTROL)  
    (EACH INCLUDES BOLT, RING & SEALS)
4. 134-4126 [1] WASHER (4.52X8.28X0.76-MM THK)  
  M   METRIC PART
 

#KEBP01740058
 

488-3843: KIT-SCREED HEATING ELEMENT

488-3843 KIT-SCREED HEATING ELEMENT
S/N 2LN1-UP
PROVIDES SERVICE REPAIR OF WEAR PARTS
FIELD INSTALLATION
i06512308 KEBP0174
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8I-0179 [3] BAR-NOSE  
  8I-0180 [2] BAR-NOSE  
  8I-0182 [2] BAR-NOSE  
  1K-6872 [26] LOCKNUT (1/2-13-THD)  
  6V-8188 [74] NUT (1/2-13-THD)  
  104-2231 [8] NUT-SPRING  
  139-5248 [1] PLATE (RH)  
  139-5249 [1] PLATE (LH)  
  165-3558 [1] PLATE  
  165-3559 [1] PLATE  
  165-3560 [1] PLATE  
  8I-0986 [1] PLATE AS (LH)  
  163-3359 [2] PLATE AS (LH)  
    (EACH INCLUDES)
  5P-0494 [13] STUD-WELD (1/2-13X1.125-IN)  
  163-3360 [2] PLATE AS (RH)  
    (EACH INCLUDES)
  5P-0494 [13] STUD-WELD (1/2-13X1.125-IN)  
  8I-0297 [1] PLATE AS (LH)  
  8I-0300 [1] PLATE AS (RH)  
  8I-0296 [2] PLATE AS (RH)  
  139-5247 [1] PLATE-MAIN  
  107-2784 [8] SCREW-FLAT HEAD (1/2-13X1.5-IN)  
  8I-0890 [4] SHIM (0.064-IN THK)  
  8I-0888 [8] SHIM (0.01-IN THK)  
  8I-0889 [20] SHIM (0.02-IN THK)  
  8I-0185 [24] STUD (1/2-13X2.75-IN)  
  8I-0189 [26] STUD (1/2-13X1.75-IN)  
  8I-0212 [24] STUD (1/2-13X5-IN)  
  5P-1076 [96] WASHER-HARD (13.5X30X4-MM THK)  
 

#KEBP01740059
 

111-8848: WIRING GP-SCREED

111-8848 WIRING GP-SCREED
S/N 2LN1-3052; 2MN1-3503
PART OF 112-3475, 112-3476 SCREED AR
i00484822 KEBP0174
1118848 WIRING GP-SCREED Parts scheme 1118848 WIRING GP-SCREED Parts scheme 1118848 WIRING GP-SCREED Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-7539 [1] HARNESS AS-POWER  
2. 111-7540 [1] CABLE AS-EXTENSION (LH)  
3. 111-7541 [1] CABLE AS-EXTENSION (RH)  
4. 103-7346 [4] WIRE AS  
5. 3S-2093 [18] STRAP-CABLE  
6. 8M-2773 [2] CLIP (LOOP)  
7. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
8. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 6V-8189 [1] NUT (5/16-18-THD)  
10. 7K-1181 [13] STRAP-CABLE  
11. 111-7544 Y [1] BOX GP-SCREED CONTROL (LH)  
12. 111-7545 Y [1] BOX GP-SCREED CONTROL (RH)  
13. 116-4490 Y [2] BOX GP-EXTENSION  
14. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8T-8908 [8] BOLT (1/4-20X1-IN)  
16. 2D-6235 [8] LOCKNUT (1/4-20-THD)  
17. 7S-1197 [8] SCREW-MACHINE (8-32X0.5-IN)  
18. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
19. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
20. 115-1476 [1] HARNESS AS-SCREED (PAVER TO SCREED, POWER)  
21. 111-7543 [1] CABLE AS-CONTROL  
22. 5S-7349 [2] BOLT (1/4-20X0.5-IN)  
23. 7K-1181 [22] STRAP-CABLE  
24. 8T-4012 [4] SCREW-HEX SOCKET (1/2-13X1.5-IN)  
25. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 6V-8801 [1] NUT (3/8-16-THD)  
27. 7T-0969 [1] HORN AS (24-VOLT, LOW TONE)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
28. 3S-2093 [8] STRAP-CABLE  
29. 8M-2773 [8] CLIP (LOOP)  
30. 8J-1256 [5] CLIP (LOOP)  
31. 077-8184 [2] CLAMP  
32. 103-6163 [1] BRACKET AS  
33. 103-6164 [1] BRACKET AS  
34. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
35. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
36. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
37. 4M-5281 [4] BOLT (1/4-20X0.75-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Vibratory Control
8-16B, 10-20B and 10-20WB Extend-A-Mat© Screed
Burner Control
8-16B, 10-20B and 10-20WB Extend-A-Mat© Screed
Special Instruction
A Testing Procedure for the Automatic Burner Control{5700, 6642}
A Testing Procedure for the Automatic Burner Control{5700, 6642}

Caterpillar Parts SIS Catalog 10-20B :

BOX GP-SCREED CONTROL
146-8481 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
146-8176 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
144-3499 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
111-7545 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
111-7544 BOX GP-SCREED CONTROL
BOX GP-EXTENSION
116-4490 BOX GP-EXTENSION
SLOPER GP-POWER
230-6381 SLOPER GP-POWER
SLOPER GP-POWER
112-3470 SLOPER GP-POWER
149-2995 CONTROL AR-MANUAL BURNER
CONTROL GP-BURNER
146-8906 CONTROL GP-BURNER
CONTROL GP-BURNER ELECTRONIC
143-6447 CONTROL GP-BURNER ELECTRONIC
180-7979 CONTROL GP-BURNER ELECTRONIC
DETECTOR GP-FLAME
143-2919 DETECTOR GP-FLAME
BUFFER GP-SENSOR
122-9303 BUFFER GP-SENSOR
CONTROL GP-UNPROGRAMMED
172-9391 CONTROL GP-UNPROGRAMMED
488-3843 KIT-SCREED HEATING ELEMENT

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.