AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

185-3509 PUMP GP-PISTON -CONVEYOR, RH S/N 5GN482-504; 9DN413-UP PART OF 115-2278, 228-5755 LINES GP-CONVEYOR BG-225C


HYDRAULIC SYSTEM
PUMP GP
TANK GP
VALVE GP

ASPHALT PAVER BG-225C ASPHALT PAVER 5GN
 CATERPILLAR AP-650B, BARBER-GREENE BG-225C Asphalt Pavers 5GN00001-UP (MACHINE) POWERED BY 3054 Engine KEBP0179 BG-225C 5GN   (1998)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-PISTON
154-6613 PUMP GP-PISTON
PUMP GP-PISTON
185-3508 PUMP GP-PISTON
PUMP GP-PISTON
185-3509 PUMP GP-PISTON
PUMP GP-PISTON
8I-0836 PUMP GP-PISTON
PUMP GP-PISTON
8I-0961 PUMP GP-PISTON
PUMP GP-PISTON
8I-0962 PUMP GP-PISTON
 

#KEBP01790230
 

185-3509: PUMP GP-PISTON

185-3509 PUMP GP-PISTON -CONVEYOR, RH
S/N 5GN482-504; 9DN413-UP
PART OF 115-2278, 228-5755 LINES GP-CONVEYOR
i01243290 KEBP0179
1853509 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8336 M [1] BOLT (M12X1.75X70-MM)  
2. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
3. 8T-5039 [3] SEAL-O-RING  
4. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
5. 152-7576 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
6. 095-0888 [2] PIN-SPRING  
7. 111-6800 [1] CONE-BEARING  
8. 9T-3038 [1] SHIM PACK (CONVEYOR PUMP)  
9. 6E-6569 Y [1] ROTATING GP-PUMP  
10. 3E-7417 [2] PLUG  
11. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
12. 6E-6573 [1] BEARING  
13. 005-0471 [1] CONE-BEARING  
14. 005-0469 [1] CUP-BEARING  
15. 033-6036 [1] SEAL-O-RING  
16. 6E-4224 [1] PLUG-SWASHPLATE  
17. 064-9829 [1] PLUG  
18. 3K-0360 [1] SEAL-O-RING  
19. 3E-6776 [2] SEAL-LIP TYPE  
20. 008-3214 [2] RING-RETAINING (INTERNAL)  
21. 5P-3863 [1] SEAL-O-RING  
22. 6E-6575 [1] COVER  
23. 6V-8837 M [3] BOLT (M6X1X16-MM)  
24. 6E-6576 [1] BEARING  
25. 6V-5684 M [4] BOLT (M12X1.75X45-MM)  
26. 8T-7876 [2] SEAL-O-RING  
27. 153-0063 [1] SHAFT  
28. 9T-3030 [1] PLATE  
29. 111-6801 [1] CUP-BEARING  
30. 6E-6580 [1] GASKET  
31. 9T-1652 [1] PIN  
32. 6E-6583 [1] SWASHPLATE GP  
33. JZ [1] SEAL  
34. JZ [1] PISTON  
35. JZ [1] SPRING  
36. JZ [1] ROD  
37. TZ [1] ROD  
38. TZ [1] PISTON  
39. TZ [1] SEAL  
   
  185-3510 F [1] SHIM  
  185-3511 F [1] SHIM  
   
    AVAILABLE REPAIR KIT(S):
  6E-6578 J [1] KIT-PISTON BIAS (CONVEYOR PUMP)  
  6E-6582 T [1] KIT-PISTON CONTROL (CONVEYOR PUMP)  
  F   NOT SHOWN
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  T   KIT MARKED T INCLUDES PART(S) MARKED T
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP01790231
 

8I-0836: PUMP GP-PISTON

8I-0836 PUMP GP-PISTON -AUXILIARY
S/N 5GN1-UP; 9DN1-UP
PART OF 115-2282 LINES GP-HOPPER
i00424307 KEBP0179
8I0836 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 031-0214 [8] BOLT-LOCKING (1/4-20X0.5-IN)  
2. 9T-2017 [2] SPACER (12.2-MM THK)  
3. 9T-2014 [2] COVER  
4. 9T-2011 [1] SHIM PACK  
5. 005-8593 J [2] SEAL-O-RING  
6. 7T-9831 [2] CONE-BEARING  
7. 3P-8680 [2] CUP-BEARING  
8. 8Q-2979 [1] RING  
9. 8T-5040 J [1] SEAL-LIP TYPE  
10. 5P-0076 [6] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
11. 9T-2168 [1] SPRING  
12. 9T-2171 [1] SEAT  
13. 9T-2173 [1] SEAT  
14. 8J-8308 [1] PIN-ROLL  
15. 9T-1752 J [1] GASKET  
16. 7T-9754 [1] CONE-BEARING  
17. 7T-9755 [1] CUP-BEARING  
18. 9T-2172 [1] PISTON  
19. 9T-2170 [1] ROD-PISTON  
20. 7Y-5219 J [1] SEAL-O-RING  
21. 6E-6481 [1] SHAFT  
22. 9T-1636 [1] SEAT  
23. 9T-1710 [1] POPPET  
24. 9T-3867 [1] SPRING  
25. 9T-2000 [1] KIT-SPACER (AUXILIARY PUMP)  
26. 9T-2001 [1] PIN  
27. 069-1745 [1] PLUG  
28. 9T-2031 Y [1] ROTATING GP-PUMP  
29. 9T-2232 [1] PLATE-WAFER  
30. 9F-2247 [1] PLUG-PIPE  
31. 054-3433 J [1] SEAL  
32. 9T-2231 [1] SWASHPLATE  
33. 9H-1113 [1] RING-RETAINING  
34. 9T-2002 J [1] GASKET  
35. 5F-9144 J [1] SEAL-O-RING  
36. 257-5145 Y [1] VALVE GP-PUMP CONTROL (AUXILIARY PUMP)  
37. 8T-5089 [2] PIN-SPRING  
38. 7T-9752 [1] CONE-BEARING  
39. 7T-9753 [1] CUP-BEARING  
40. 100-4231 [1] CONNECTOR  
41. 8F-9206 [2] SEAL-O-RING  
42. 9T-3815 [1] SEAT  
43. 7L-0688 [4] BOLT-SOCKET HEAD (10-24X1.2-IN)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  1G-9660 J [1] KIT-SEAL (AUXILIARY PUMP)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#KEBP01790232
 

8I-0961: PUMP GP-PISTON

8I-0961 PUMP GP-PISTON
S/N 5GN1-UP; 9DN1-UP
PART OF 115-2278 LINES GP-CONVEYOR
i00708972 KEBP0179
8I0961 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2607 M [2] BOLT (M12X1.75X130-MM)  
2. 8T-0372 M [2] BOLT (M12X1.75X90-MM)  
3. 3E-7417 [2] PLUG  
4. 152-7576 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
5. 6E-6580 [1] GASKET  
6. 111-6801 [1] CUP-BEARING  
7. 111-6800 [1] CONE-BEARING  
8. 9T-3038 [1] SHIM PACK  
9. 6E-6569 Y [1] ROTATING GP-PUMP  
10. 152-7577 [1] SHAFT  
11. 6E-6583 [1] SWASHPLATE GP  
  8F-7219 [2] SEAL-O-RING  
  139-0532 [2] BLOCK-STOP  
12. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
13. 6E-6573 [1] BEARING  
14. 005-0471 [1] CONE-BEARING  
15. 005-0469 [1] CUP-BEARING  
16. 033-6036 [1] SEAL-O-RING  
17. 6E-4224 [1] PLUG-SWASHPLATE  
18. 064-9829 [1] PLUG  
19. 3K-0360 [1] SEAL-O-RING  
20. 008-3214 [1] RING-RETAINING (INTERNAL)  
21. 3E-6776 [1] SEAL-LIP TYPE  
22. 5P-3863 [2] SEAL-O-RING  
23. 6E-6575 [1] COVER  
24. 6V-8337 M [3] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
25. 6E-6576 [1] BEARING  
26. JZ [1] ROD  
27. JZ [1] PISTON  
28. 9T-3030 [1] PLATE  
29. 095-0888 [2] PIN-SPRING  
30. 9T-1652 [1] PIN  
31. 9T-1636 [1] SEAT  
32. 9T-1710 [1] POPPET  
33. 9T-1699 [1] SPRING  
34. 5E-0916 [2] SEAL-O-RING  
35. 8T-5039 [3] SEAL-O-RING  
36. 6V-5684 M [2] BOLT (M12X1.75X45-MM)  
37. 6V-8837 M [4] BOLT (M6X1X16-MM)  
38. JZ [1] SEAL  
39. HZ [1] SEAL  
40. HZ [1] ROD  
41. HZ [1] SPRING  
42. HZ [1] PISTON  
43. Z [1] HOUSING  
44. Z [1] COVER  
45. 161-3921 [1] PLATE-ADAPTER  
   
    AVAILABLE REPAIR KIT(S):
  6E-6582 H [1] KIT-PISTON CONTROL  
  6E-6578 J [1] KIT-PISTON BIAS  
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP01790233
 

8I-0962: PUMP GP-PISTON

8I-0962 PUMP GP-PISTON
S/N 5GN1-UP; 9DN1-UP
PART OF 115-2278 LINES GP-CONVEYOR
i00708973 KEBP0179
8I0962 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8336 M [1] BOLT (M12X1.75X70-MM)  
2. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
3. 3E-7417 [2] PLUG  
4. 152-7576 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
5. 6E-6580 [1] GASKET  
6. 111-6801 [1] CUP-BEARING  
7. 111-6800 [1] CONE-BEARING  
8. 9T-3038 [1] SHIM PACK  
9. 6E-6569 Y [1] ROTATING GP-PUMP  
10. 153-0063 [1] SHAFT  
11. 6E-6583 [1] SWASHPLATE GP  
  8F-7219 [2] SEAL-O-RING  
  139-0532 [2] BLOCK-STOP  
12. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
13. 6E-6573 [1] BEARING  
14. 005-0471 [1] CONE-BEARING  
15. 005-0469 [1] CUP-BEARING  
16. 033-6036 [1] SEAL-O-RING  
17. 6E-4224 [1] PLUG-SWASHPLATE  
18. 064-9829 [1] PLUG  
19. 3K-0360 [1] SEAL-O-RING  
20. 008-3214 [2] RING-RETAINING (INTERNAL)  
21. 3E-6776 [2] SEAL-LIP TYPE  
22. 5P-3863 [1] SEAL-O-RING  
23. 6E-6575 [1] COVER  
24. 6V-8337 M [3] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
25. 6E-6576 [1] BEARING  
26. Z [1] ROD  
27. JZ [1] PISTON  
28. 9T-3030 [1] PLATE  
29. 095-0888 [2] PIN-SPRING  
30. 9T-1652 [1] PIN  
31. 9T-1636 [1] SEAT  
32. 9T-1710 [1] POPPET  
33. 9T-1699 [1] SPRING  
34. 5E-0916 [2] SEAL-O-RING  
35. 8T-5039 [3] SEAL-O-RING  
36. 6V-5684 M [4] BOLT (M12X1.75X45-MM)  
37. 6V-8837 M [4] BOLT (M6X1X16-MM)  
38. JZ [1] SEAL  
39. HZ [1] SEAL  
40. HZ [1] ROD  
41. HZ [1] SPRING  
42. HZ [1] PISTON  
43. Z [1] HOUSING  
44. Z [1] COVER  
   
    AVAILABLE REPAIR KIT(S):
  6E-6582 H [1] KIT-PISTON CONTROL  
  6E-6578 J [1] KIT-PISTON BIAS  
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP01790234
 

6E-6569: ROTATING GP-PUMP

6E-6569 ROTATING GP-PUMP
S/N 5GN1-UP; 9DN1-UP
PART OF 154-6612, 154-6613, 185-3508, 185-3509, 8I-0961, 8I-0962 PUMP GP-PISTON
i00403042 KEBP0179
6E6569 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 002-3455 [1] RING-RETAINING  
2. 9T-3025 [1] GUIDE  
3. 3T-0849 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 6E-6584 [2] PLATE-SPACER  
5. 6E-6585 [2] PLATE-LIMITER  
6. 9T-3018 [9] PISTON AS  
7. 9T-3021 [1] GUIDE  
8. 9T-3023 [1] SPRING  
9. 9T-3026 [1] BARREL  
10. 9T-3019 [1] PLATE  
  M   METRIC PART
 

#KEBP01790235
 

9T-2031: ROTATING GP-PUMP

9T-2031 ROTATING GP-PUMP
S/N 5GN1-UP; 9DN1-UP
PART OF 8I-0836 PUMP GP-PISTON
i00169354 KEBP0179
9T2031 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3868 [1] KIT-PISTON (PUMP ROTATING GROUP)  
    (INCLUDES PISTONS)
2. 9T-3860 [1] PLATE  
3. 9T-3859 [1] WASHER (1.068X1.139X0.099-MM THK)  
4. 9T-3862 [1] RETAINER  
5. 9T-3857 [3] PIN  
6. 9T-3863 [1] BARREL  
7. 9T-3861 [1] WASHER (1.062X1.58X0.095-MM THK)  
8. 9T-3858 [1] SPRING  
9. 9T-3864 [1] WASHER (1.2X1.58X0.095-MM THK)  
10. 004-1683 [1] RING-SNAP  
 

#KEBP01790236
 

111-1326: TANK GP-HYDRAULIC

111-1326 TANK GP-HYDRAULIC
S/N 5GN1-UP; 9DN1-UP
PART OF 125-9224 TANK GP-HYDRAULIC
Type 1
i00475438 KEBP0179
1111326 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-9340 [1] TANK AS-HYDRAULIC  
2. 8I-0943 [1] GAUGE-SIGHT  
3. 8I-0858 [5] SCREEN-SUCTION  
4. 1B-2578 [19] NUT (3/8-16-THD)  
5. 7X-9958 Y [1] FILTER GP-OIL  
6. 077-3951 Y [1] CAP GP-HYDRAULIC OIL FILLER  
7. 107-9430 [1] COVER AS  
8. 6V-8801 [21] NUT (3/8-16-THD)  
9. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 133-2870 [1] GASKET  
11. 5P-1075 [18] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 005-8615 [1] NIPPLE-PIPE  
13. 107-9624 [1] DIFFUSER  
14. 134-3544 [1] COUPLING-REDUCER  
15. 133-7163 [2] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01790237
 

111-1326: TANK GP-HYDRAULIC

111-1326 TANK GP-HYDRAULIC
S/N 5GN1-UP; 9DN1-UP
PART OF 125-9224 TANK GP-HYDRAULIC
Type 2
i01854702 KEBP0179
1111326 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-9340 [1] TANK AS-HYDRAULIC  
2. 8I-0943 [1] GAUGE-SIGHT (HYDRAULIC TANK)  
3. 8I-0858 [5] SCREEN-SUCTION (HYDRAULIC TANK)  
4. 1B-2578 [18] NUT (3/8-16-THD)  
5. 176-9415 CY [1] FILTER GP-OIL (HYDRAULIC TANK)  
6. 077-3951 Y [1] CAP GP-HYDRAULIC OIL FILLER  
7. 107-9430 [1] COVER AS  
8. 6V-8801 [21] NUT (3/8-16-THD)  
9. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 236-5924 [1] GASKET-SEAL  
11. 5P-1075 [18] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 005-8615 [1] NIPPLE-PIPE  
14. 134-3544 [1] COUPLING-REDUCER  
16. 5M-6755 [6] SCREW-MACHINE (10-24X0.562-IN)  
17. 309-5157 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01790238
 

125-9224: TANK GP-HYDRAULIC

125-9224 TANK GP-HYDRAULIC
S/N 5GN1-UP; 9DN1-UP
PART OF 115-2277 HYDRAULIC AR
i00674424 KEBP0179
1259224 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-1326 Y [1] TANK GP-HYDRAULIC  
2. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL)  
3. 172-8660 Y [1] SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)  
4. 3E-7504 [1] SWITCH GP-TEMPERATURE (HYDRAULIC OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 155-7321 [1] ADAPTER AS  
  6V-1722 [1] ADAPTER  
  3D-2824 [1] SEAL-O-RING  
6. 174-1530 [1] PLUG AS  
  1N-5998 [1] PLUG  
  6K-6307 [1] SEAL-O-RING  
7. 3K-0360 [1] SEAL-O-RING  
8. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC TANK DRAIN)  
  3K-0360 [1] SEAL-O-RING  
9. 9X-2488 [1] CLAMP-HOSE  
10. 183-3633 I [1] HOSE AS  
11. 165-4935 [1] PLUG AS  
  6V-9510 [1] PLUG  
  7J-9108 [1] SEAL-O-RING  
12. 8T-9383 [2] BOLT (1/2-13X0.75-IN)  
13. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6V-8188 [2] NUT (1/2-13-THD)  
15. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
16. [5] PLUG AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
17. 148-8407 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
18. 3J-1907 [1] SEAL-O-RING  
19. 8C-0370 [1] CLAMP AS  
20. 2M-9780 [1] SEAL-O-RING  
21. 192-0864 [1] STEP AS  
22. 7V-6659 [2] CLAMP-DOUBLE  
23. 4V-0612 [1] PLATE  
24. 7X-0440 [1] BOLT (5/16-18X1.75-IN)  
25. 124-6300 [1] PLATE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP01790239
 

134-4720: VALVE GP-BANK

134-4720 VALVE GP-BANK
S/N 5GN1-UP; 9DN1-UP
PART OF 115-2283 LINES GP-SCREED ELEVATION
i00509484 KEBP0179
1344720 VALVE GP-BANK Parts scheme
  For full view, you need register

Parts for your BG-225C ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-5938 [1] VALVE-BLOCK  
2. 5K-9090 J [2] SEAL-O-RING  
3. 6R-1210 [2] BRACKET  
4. 6R-1877 [2] TIE ROD  
5. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
6. 7J-9108 J [4] SEAL-O-RING  
7. 8C-0445 J [2] RING-SQUARE  
8. 9X-7453 J [4] SEAL-QUAD RING  
9. 086-9083 [2] BODY  
10. 086-9085 [4] SPRING  
11. 086-9086 [4] WASHER  
12. 8T-8911 [2] BOLT (5/16-18X2-IN)  
13. 086-9094 [2] SPOOL  
14. 095-1751 J [8] SEAL-O-RING  
15. 128-7010 [1] VALVE GP-CHECK  
16. 5P-2955 [2] BOLT (5/16-18X2.5-IN)  
17. 9X-1813 BE SLEEVE  
18. 102-8802 [4] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
19. 9W-0852 [16] PIN-CONNECTOR (14-GA TO 16-GA)  
20. 086-9080 [4] CASE AS  
21. 114-0021 [4] COIL  
22. [2] KIT-SOLENOID VALVE (BANK VALVE)  
   
    AVAILABLE REPAIR KIT(S):
  086-9087 J [1] KIT-SEAL (BANK VALVE)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
Product Support Program For Horsepower Management On Certain AP-650 Asphalt Pavers; And On Certain Barber-Greene BG-225C Asphalt Pavers Manufactured By Caterpillar
Product Support Program For Horsepower Management On Certain AP-650 Asphalt Pavers; And On Certain Barber-Greene BG-225C Asphalt Pavers Manufactured By Caterpillar
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure
1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure
Specifications
Propel Pump
CATERPILLAR AP-650B ASPHALT PAVER & BARBER-GREENE BG225C ASP
Auxiliary Pump
CATERPILLAR AP-650B ASPHALT PAVER & BARBER-GREEN BG-225C ASP
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Solenoids
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Troubleshooting
CID 045 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 045 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 045 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 046 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 046 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 046 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 047 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 047 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 047 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 048 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 048 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
CID 048 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System
Disassembly and Assembly
Vibratory Pump
AP-650B & BG-225B ASPHALT PAVER MACHINE SYSTEMS
Auxiliary Pump
AP-650B & BG-225B ASPHALT PAVER MACHINE SYSTEMS
Feeder Pumps
AP-650B & BG-225B ASPHALT PAVER MACHINE SYSTEMS
Propel Pumps
AP-650B & BG-225B ASPHALT PAVER MACHINE SYSTEMS
Service Magazine
Different Pumps Now Used On X-Series Asphalt Pavers To Increase Conveyor System Pressure {5070}
1998/08/03
The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
2000/08/14
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog BG-225C :

PUMP GP-PISTON
185-3508 PUMP GP-PISTON
PUMP GP-PISTON
154-6613 PUMP GP-PISTON
PUMP GP-PISTON
154-6612 PUMP GP-PISTON
PUMP GP-PISTON
105-8881 PUMP GP-PISTON
PUMP GP-PISTON
105-8880 PUMP GP-PISTON
PUMP GP-PISTON
105-8880 PUMP GP-PISTON
PUMP GP-GEAR
226-2451 PUMP GP-GEAR
PUMP GP-GEAR
104-4199 PUMP GP-GEAR
PUMP GP-PISTON
8I-0836 PUMP GP-PISTON
PUMP GP-PISTON
8I-0961 PUMP GP-PISTON
PUMP GP-PISTON
8I-0962 PUMP GP-PISTON
ROTATING GP-PUMP
6E-6569 ROTATING GP-PUMP
ROTATING GP-PUMP
9T-2031 ROTATING GP-PUMP
TANK GP-HYDRAULIC
111-1326 TANK GP-HYDRAULIC
TANK GP-HYDRAULIC
111-1326 TANK GP-HYDRAULIC
TANK GP-HYDRAULIC
125-9224 TANK GP-HYDRAULIC

Truck sale:

2001 CAT BG-225C
USD $25,818 
2001 CAT BG-225C

TOROMONT CAT - Main
TORONTO, Ontario, Canada
2003 CAT BG-225C
USD $44,250 
2003 CAT BG-225C

Gulf Coast Equipment
CATERPILLAR BG-225C 2001
 
CATERPILLAR BG-225C 2001
- ASPHALT PAVERS
FABICK CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.