AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

PM-565 Cold Planer 3TK00113-UP (MACHINE) POWERED BY 3408 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



COLD PLANER PM-565 COLD PLANER 3TK
 PM-565 Cold Planer 3TK00113-UP (MACHINE) POWERED BY 3408 Engine KEBP0183 PM-565 3TK   (1992)

Parts group PM-565:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALARM GP
3E-6328 ALARM GP
3E-6328 ALARM GP
S/N 3TK113-UP
24-VOLT
PART OF 133-4053 WIRING GP-CONSOLE
ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
135-3224 ALTERNATOR GP-CHARGING
135-3224 ALTERNATOR GP-CHARGING
S/N 3TK113-123
PART OF 131-7241 INSTALLATION AR-ENGINE
ALTERNATOR GP-CHARGING
197-8820 ALTERNATOR GP-CHARGING
197-8820 ALTERNATOR GP-CHARGING
S/N 3TK113-UP
24-VOLT, 95-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@
ALTERNATOR GP-CHARGING
316-7251 ALTERNATOR GP-CHARGING
316-7251 ALTERNATOR GP-CHARGING
S/N 3TK113-UP
24-VOLT, 105-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@
ALTERNATOR GP-CHARGING
9X-7803 ALTERNATOR GP-CHARGING
9X-7803 ALTERNATOR GP-CHARGING
S/N 3TK113-123
24-VOLT, 100-AMPERE. BRUSHLESS, REQUIRES 2300 RPM MINIMUM IDLE SPEED
PART OF 135-3224 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@197-8820@@@@@
OPTIONAL FIELD REPLACEMENT ORDER @@@@@316-7251@@@@@, 3T-4688 TERMINAL-RING
BATTERY GP
BATTERY & WIRING GP
133-4054 BATTERY & WIRING GP
133-4054 BATTERY & WIRING GP
S/N 3TK113-UP
PART OF 133-4056 ELECTRICAL AR
BOX GP
BOX GP-ROTOR CONTROL
110-2882 BOX GP-ROTOR CONTROL
110-2882 BOX GP-ROTOR CONTROL
S/N 3TK113-UP
PART OF 1G-9473 WIRING GP-ROTOR
AN ATTACHMENT
CONTROL GP-ELECTRONIC
CONTROL & MTG GP-ENGINE ELEK
109-0400 CONTROL & MTG GP-ENGINE ELEK
109-0400 CONTROL & MTG GP-ENGINE ELEK
S/N 99C1-4494
PART OF 123-0205 ENGINE AR
CONTROL & MTG GP-ROTOR ELEK
6R-3010 CONTROL & MTG GP-ROTOR ELEK
6R-3010 CONTROL & MTG GP-ROTOR ELEK
S/N 3TK113-UP
PART OF 133-4053 WIRING GP-CONSOLE
Type 1
CONTROL & MTG GP-ROTOR ELEK
6R-3010 CONTROL & MTG GP-ROTOR ELEK
6R-3010 CONTROL & MTG GP-ROTOR ELEK
S/N 3TK113-UP
PART OF 133-4053 WIRING GP-CONSOLE
Type 2
CONTROL & MTG GP-STEERING
1G-7777 CONTROL & MTG GP-STEERING
1G-7777 CONTROL & MTG GP-STEERING
S/N 3TK113-UP
PART OF 1G-7776 STEERING GP-MECHANICAL
ELECTRONICS GP-ENGINE
CONTROL GP-ENGINE ELECTRONIC
105-6122 CONTROL GP-ENGINE ELECTRONIC
105-6122 CONTROL GP-ENGINE ELECTRONIC
S/N 99C1-4494
ADEM-II
PART OF 109-0400 CONTROL & MTG GP-ENGINE ELEK
128-3114 CONTROL GP-ENGINE ELECTRONIC
128-3114 CONTROL GP-ENGINE ELECTRONIC
S/N 99C1-4494
PART OF 123-0205 ENGINE AR
CONTROL GP-ENGINE ELECTRONIC
172-0802 CONTROL GP-ENGINE ELECTRONIC
172-0802 CONTROL GP-ENGINE ELECTRONIC
S/N 99C1-4494
ADEM-II
PART OF 105-6122 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-GRADE
CONTROL GP-GRADE & SLOPE
114-1774 CONTROL GP-GRADE & SLOPE
114-1774 CONTROL GP-GRADE & SLOPE
S/N 3TK113-UP
PART OF 133-4053 WIRING GP-CONSOLE
CONTROL GP-SLOPE
CONTROL GP-GRADE & SLOPE
114-1774 CONTROL GP-GRADE & SLOPE
114-1774 CONTROL GP-GRADE & SLOPE
S/N 3TK113-UP
PART OF 133-4053 WIRING GP-CONSOLE
CONTROL GP-SPEED
CONTROL GP-SPEED
1G-7784 CONTROL GP-SPEED
1G-7784 CONTROL GP-SPEED
S/N 3TK113-UP
PART OF 133-4053 WIRING GP-CONSOLE
Type 1
CONTROL GP-SPEED
1G-7784 CONTROL GP-SPEED
1G-7784 CONTROL GP-SPEED
S/N 3TK113-UP
PART OF 133-4053 WIRING GP-CONSOLE
Type 2
ELECTRICAL GP
133-4056 ELECTRICAL AR
133-4056 ELECTRICAL AR
S/N 3TK113-UP
PART OF 128-4073 GENERAL AR
PANEL GP-ELECTRONIC
143-0332 PANEL GP-ELECTRONIC
143-0332 PANEL GP-ELECTRONIC
S/N 3TK119-UP
PART OF 143-0338 PANEL GP-ELECTRONIC
PANEL GP-ELECTRONIC
143-0338 PANEL GP-ELECTRONIC
143-0338 PANEL GP-ELECTRONIC
S/N 3TK119-UP
PART OF 133-4053 WIRING GP-CONSOLE
LIGHTING GP
LAMP GP-FLOOD
162-3294 LAMP GP-FLOOD
162-3294 LAMP GP-FLOOD
S/N 3TK113-UP
24-VOLT, LOW BEAM
LAMP GP-FLOOD
9X-1439 LAMP GP-FLOOD
9X-1439 LAMP GP-FLOOD
S/N 3TK113-UP
24-VOLT
PART OF 133-4053 WIRING GP-CONSOLE, 134-6229 WIRING GP-CONVEYOR, 133-4057 WIRING GP-FRONT, 133-4059 WIRING GP-REAR, 133-4060, 1G-9473 WIRING GP-ROTOR
ALSO AN ATTACHMENT
LAMP GP-SERVICE
110-7564 LAMP GP-SERVICE
110-7564 LAMP GP-SERVICE
S/N 3TK113-UP
PART OF 1G-7788 TOOL GP
LAMP GP-SIGNAL
3E-6466 LAMP GP-SIGNAL
3E-6466 LAMP GP-SIGNAL
S/N 3TK113-UP
24-VOLT, 21-WATT
PART OF 133-4057 WIRING GP-FRONT, 133-4059 WIRING GP-REAR
LAMP GP-WARNING BEACON
110-7563 LAMP GP-WARNING BEACON
110-7563 LAMP GP-WARNING BEACON -STROBE LIGHT
S/N 3TK113-UP
24-VOLT
PART OF 110-9746 LIGHTING GP-WARNING BEACON
FIELD REPLACEMENT ORDER @@@@@338-1132@@@@@
LAMP GP-WARNING BEACON
338-1132 LAMP GP-WARNING BEACON
338-1132 LAMP GP-WARNING BEACON -STROBE
S/N 3TK113-UP
12-VOLT, 24-VOLT, LED
FIELD REPLACEMENT FOR @@@@@110-7563@@@@@
LIGHTING GP-WARNING BEACON
110-9746 LIGHTING GP-WARNING BEACON
110-9746 LIGHTING GP-WARNING BEACON
S/N 3TK113-UP
PART OF 131-4825 CHASSIS AR
MOTOR GP
PUMP & MOTOR GP-HYDRAULIC
1G-9813 PUMP & MOTOR GP-HYDRAULIC
1G-9813 PUMP & MOTOR GP-HYDRAULIC
S/N 3TK113-UP
PART OF 1G-7923 PUMP & MTG GP-ELECTRIC DRIVE
SENSOR GP
MOUNTING GP-SENSOR
134-8082 MOUNTING GP-SENSOR
134-8082 MOUNTING GP-SENSOR
S/N 3TK113-UP
PART OF 131-4825 CHASSIS AR
SENSOR & MTG GP-ELEVATION
1G-9610 SENSOR & MTG GP-ELEVATION
1G-9610 SENSOR & MTG GP-ELEVATION
S/N 3TK113-UP
PART OF 131-4825 CHASSIS AR
SENSOR GP-POSITION
1G-9498 SENSOR GP-POSITION
1G-9498 SENSOR GP-POSITION
S/N 3TK113-UP
PART OF 1G-9610 SENSOR & MTG GP-ELEVATION
SENSOR GP-POSITION
1G-9499 SENSOR GP-POSITION
1G-9499 SENSOR GP-POSITION
S/N 3TK113-UP
PART OF 1G-9610 SENSOR & MTG GP-ELEVATION
SENSOR GP-POSITION
266-1478 SENSOR GP-POSITION
266-1478 SENSOR GP-POSITION -ROTARY
S/N 3TK113-UP
PART OF 6R-3010 CONTROL & MTG GP-ROTOR ELEK, 1G-7777 CONTROL & MTG GP-STEERING, 1G-7784 CONTROL GP-SPEED, 1G-9332 CONTROL GP-STEERING
SENSOR GP-POSITION
6R-0486 SENSOR GP-POSITION
6R-0486 SENSOR GP-POSITION
S/N 3TK113-UP
PART OF 133-4057 WIRING GP-FRONT, 133-4060, 1G-9473 WIRING GP-ROTOR
ALSO AN ATTACHMENT
SENSOR GP-POSITION
9X-5592 SENSOR GP-POSITION
9X-5592 SENSOR GP-POSITION
S/N 3TK113-UP
PART OF 6R-3010 CONTROL & MTG GP-ROTOR ELEK, 1G-7784 CONTROL GP-SPEED, 1G-9332 CONTROL GP-STEERING
SENSOR GP-PRESSURE
103-6092 SENSOR GP-PRESSURE
103-6092 SENSOR GP-PRESSURE
S/N 99C1-4494
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
SENSOR GP-PRESSURE
103-6093 SENSOR GP-PRESSURE
103-6093 SENSOR GP-PRESSURE
S/N 99C1-4494
PART OF 125-3428 DRIVE GP-UNIT INJ HYD PUMP
FIELD REPLACEMENT ORDER @@@@@161-9926@@@@@
SENSOR GP-PRESSURE
153-3962 SENSOR GP-PRESSURE
153-3962 SENSOR GP-PRESSURE
S/N 3TK113-UP
FIELD REPLACEMENT FOR @@@@@ 9X-5272@@@@@
SENSOR GP-PRESSURE
161-9926 SENSOR GP-PRESSURE
161-9926 SENSOR GP-PRESSURE
S/N 99C1-4494
OPTIONAL FIELD REPLACEMENT ORDER 350-0664 SENSOR GP-PRESSURE, 249-5293 HARNESS AS-SENSOR
FIELD REPLACEMENT FOR @@@@@103-6093@@@@@
SENSOR GP-PRESSURE
167-1709 SENSOR GP-PRESSURE
167-1709 SENSOR GP-PRESSURE
S/N 99C1-4494
PART OF 107-7319 CYLINDER HEAD GP
SENSOR GP-PRESSURE
194-6724 SENSOR GP-PRESSURE
194-6724 SENSOR GP-PRESSURE
S/N 99C1-4494
PART OF 107-7319 CYLINDER HEAD GP
OPTIONAL FIELD REPLACEMENT ORDER 276-6793 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
9X-5272 SENSOR GP-PRESSURE
9X-5272 SENSOR GP-PRESSURE
S/N 3TK113-UP
PART OF 133-4059 WIRING GP-REAR
FIELD REPLACEMENT ORDER @@@@@153-3962@@@@@
SENSOR GP-PRESSURE ELECTRONIC
145-4876 SENSOR GP-PRESSURE ELECTRONIC
145-4876 SENSOR GP-PRESSURE ELECTRONIC
S/N 3TK124-UP
PART OF 133-4059 WIRING GP-REAR
SENSOR GP-SPEED
100-4505 SENSOR GP-SPEED
100-4505 SENSOR GP-SPEED
S/N 99C1-4494
PART OF 123-0205 ENGINE AR
SENSOR GP-SPEED
129-6628 SENSOR GP-SPEED
129-6628 SENSOR GP-SPEED
S/N 99C1-4494
PART OF 126-7280 HOUSING GP-FRONT
FIELD REPLACEMENT ORDER @@@@@265-9033@@@@@, @@@@@273-5041@@@@@
SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
S/N 99C1-4494
CAMSHAFT POSITION
FIELD REPLACEMENT FOR @@@@@129-6628@@@@@
SENSOR GP-SPEED
273-5041 SENSOR GP-SPEED
273-5041 SENSOR GP-SPEED
S/N 99C1-4494
FIELD REPLACEMENT FOR @@@@@129-6628@@@@@
FOR USE WITH FIELD REPLACEMENT OF 129-6628 ON THE FOLLOWING ENGINES ONLY, 3508, 3512, 3508B, 3512B, 3516B, & 3524B
SENSOR GP-TEMPERATURE
102-2240 SENSOR GP-TEMPERATURE
102-2240 SENSOR GP-TEMPERATURE
S/N 99C1-4494
PART OF 131-8646 LINES GP-WATER
SENSOR GP-TEMPERATURE
106-0735 SENSOR GP-TEMPERATURE
106-0735 SENSOR GP-TEMPERATURE
S/N 99C1-4494
PROVIDES SENSORS FOR MONITORING MARINE TRANSMISSION OIL TEMP AND PRESSURE, 3 PIN ACTIVE
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
SENSOR GP-TEMPERATURE
3E-8700 SENSOR GP-TEMPERATURE
3E-8700 SENSOR GP-TEMPERATURE
S/N 3TK113-UP
PART OF 133-4059 WIRING GP-REAR
STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
108-6570 STARTING MOTOR GP-ELECTRIC
108-6570 STARTING MOTOR GP-ELECTRIC
S/N 3TK113-123
PART OF 131-7241 INSTALLATION AR-ENGINE
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
S/N 3TK113-123
24-VOLT
STARTING MOTOR GP-ELECTRIC
6V-0890 STARTING MOTOR GP-ELECTRIC
6V-0890 STARTING MOTOR GP-ELECTRIC
S/N 3TK113-123
24-VOLT
PART OF 108-6570 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
SWITCH GP
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N 3TK113-UP
6-VOLT TO 24-VOLT
PART OF 133-4054 BATTERY & WIRING GP
SWITCH GP-FLOW
100-4417 SWITCH GP-FLOW
100-4417 SWITCH GP-FLOW
S/N 99C1-4494
PART OF 123-0205 ENGINE AR
SWITCH GP-LIQUID LEVEL
123-2993 SWITCH GP-LIQUID LEVEL
123-2993 SWITCH GP-LIQUID LEVEL
S/N 3TK113-UP
PART OF 133-4057 WIRING GP-FRONT
FIELD REPLACEMENT ORDER @@@@@172-8660@@@@@
FOR USE WITH DRY CIRCUIT APPLICATIONS
SWITCH GP-LIQUID LEVEL
172-8660 SWITCH GP-LIQUID LEVEL
172-8660 SWITCH GP-LIQUID LEVEL
S/N 3TK113-UP
FIELD REPLACEMENT FOR @@@@@123-2993@@@@@
FOR USE WITH DRY CIRCUIT APPLICATIONS ONLY
133-9403 SWITCH GP-ROCKER
133-9403 SWITCH GP-ROCKER
S/N 3TK113-UP
AN ATTACHMENT
133-9406 SWITCH GP-ROCKER
133-9406 SWITCH GP-ROCKER
S/N 3TK113-UP
AN ATTACHMENT
133-9408 SWITCH GP-ROCKER
133-9408 SWITCH GP-ROCKER
S/N 3TK113-UP
AN ATTACHMENT
SWITCH GP-ROTOR DOOR
137-8092 SWITCH GP-ROTOR DOOR
137-8092 SWITCH GP-ROTOR DOOR
S/N 3TK113-UP
PART OF 131-8746, 131-8747 HYDRAULIC AR-FRONT DOOR
AN ATTACHMENT
SWITCH GP-START
9G-7641 SWITCH GP-START
9G-7641 SWITCH GP-START -ENGINE, KEY
S/N 3TK113-UP
PART OF 133-4053 WIRING GP-CONSOLE
VALVE GP
VALVE GP-SOLENOID
107-0677 VALVE GP-SOLENOID
107-0677 VALVE GP-SOLENOID
S/N 99C1-4494
PART OF 134-1598, 134-9405, 144-0835 PUMP GP-UNIT INJECTOR HYD
VALVE GP-SOLENOID
6T-9290 VALVE GP-SOLENOID
6T-9290 VALVE GP-SOLENOID
S/N 3TK113-UP
24-VOLT
PART OF 6Y-9852 VALVE GP-CLUTCH
FIELD REPLACEMENT FOR 9P-0222 VALVE GP-SOLENOID
WIRING GP
BATTERY & WIRING GP
133-4054 BATTERY & WIRING GP
133-4054 BATTERY & WIRING GP
S/N 3TK113-UP
PART OF 133-4056 ELECTRICAL AR
WIRING GP-CENTER
133-4058 WIRING GP-CENTER
133-4058 WIRING GP-CENTER
S/N 3TK113-UP
PART OF 133-4055 WIRING GP-MACHINE
WIRING GP-CONSOLE
133-4053 WIRING GP-CONSOLE
133-4053 WIRING GP-CONSOLE
S/N 3TK113-118
PART OF 133-4056 ELECTRICAL AR
WIRING GP-CONSOLE
133-4053 WIRING GP-CONSOLE
133-4053 WIRING GP-CONSOLE
S/N 3TK119-UP
PART OF 133-4056 ELECTRICAL AR
WIRING GP-CONVEYOR
134-6229 WIRING GP-CONVEYOR
134-6229 WIRING GP-CONVEYOR
S/N 3TK113-UP
PART OF 131-4832 CONVEYOR AR-SECOND STAGE
WIRING GP-ENGINE ELECTRONIC
121-4082 WIRING GP-ENGINE ELECTRONIC
121-4082 WIRING GP-ENGINE ELECTRONIC
S/N 99C1-4494
PART OF 123-0205 ENGINE AR
WIRING GP-FRONT
133-4057 WIRING GP-FRONT
133-4057 WIRING GP-FRONT
S/N 3TK113-UP
PART OF 133-4055 WIRING GP-MACHINE
133-4055 WIRING GP-MACHINE
133-4055 WIRING GP-MACHINE
S/N 3TK113-UP
PART OF 133-4056 ELECTRICAL AR
WIRING GP-REAR
133-4059 WIRING GP-REAR
133-4059 WIRING GP-REAR
S/N 3TK113-UP
PART OF 133-4055 WIRING GP-MACHINE
WIRING GP-REAR
133-4059 WIRING GP-REAR
133-4059 WIRING GP-REAR
S/N 3TK124-UP
PART OF 133-4055 WIRING GP-MACHINE
WIRING GP-ROTOR
133-4060 WIRING GP-ROTOR
133-4060 WIRING GP-ROTOR
S/N 3TK113-UP
PART OF 7R-7643 ROTOR AR
AN ATTACHMENT
WIRING GP-ROTOR
1G-9473 WIRING GP-ROTOR
1G-9473 WIRING GP-ROTOR
S/N 3TK113-UP
PART OF 7R-7643 ROTOR AR
AN ATTACHMENT
WIRING GP-UNIT INJECTOR
109-0401 WIRING GP-UNIT INJECTOR
109-0401 WIRING GP-UNIT INJECTOR
S/N 99C1-4494
PART OF 123-0205 ENGINE AR
BLOCK GP-JUNCTION
BLOCK GP-JUNCTION
9W-0742 BLOCK GP-JUNCTION
9W-0742 BLOCK GP-JUNCTION -BATTERY
S/N 3TK113-UP
PART OF 133-4054 BATTERY & WIRING GP
HARNESS GP
121-0596 HARNESS AS-WIRING
121-0596 HARNESS AS-WIRING
S/N 99C1-4494
PART OF 121-4082 WIRING GP-ENGINE ELECTRONIC

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}
Systems Operation
Backup Alarm
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Disassembly and Assembly
Control Group-Backup
PM-565 COLD PLANER MACHINE SYSTEMS
Control Group-Backup
PM-565 & PM-565B COLD PLANER MACHINE SYSTEMS
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Technical Information Bulletin
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Specifications
Alternator Belt Tightener
3408 VEHICULAR ENGINE
Alternators And Regulators
3408 VEHICULAR ENGINE
Alternator Belt Tightener
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Alternator And Regulator
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Alternator and Regulator
3408E and 3412E Engines for Caterpillar Built Machines
Alternator Mounting
3408E and 3412E Engines for Caterpillar Built Machines
Alternator
30SI Series and 34SI Series Alternator
Systems Operation
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
Testing and Adjusting
Charging System - Test
3408E and 3412E Engines for Caterpillar Built Machines
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Troubleshooting
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Alternator
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Alternator V-Belt
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Pulley Group-Alternator
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Alternator
3408E ENGINE SUPPLEMENT FOR PM-565 & PM-565B COLD PLANER
Alternator V-Belt
3408E ENGINE SUPPLEMENT FOR PM-565 & PM-565B COLD PLANER
Pulley Group-Alternator
3408E ENGINE SUPPLEMENT FOR PM-565 & PM-565B COLD PLANER
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
New 100 Amp Alternators Available For Applications With Large Electrical Requirements{1405}
1992/02/17
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Cat<SUP>&reg;</SUP> Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Engine News
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
Battery - Test
3408E and 3412E Engines for Caterpillar Built Machines
Troubleshooting
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Batteries
3408E ENGINE SUPPLEMENT FOR PM-565 & PM-565B COLD PLANER
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Longer Battery Cable Improves Service Life of Battery Posts {1402}
1996/08/12
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
Service Letter-Asia
Service Letter-APD
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New Troubleshooting Guide Is Needed To Test The Grade/Slope System{7219,7569}
1996/02/26
Help Available For PC Based Service Tools Used For All Electronic Engines{1902}
1996/09/23
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Flash File Bulletin Board System To Be Discontinued {1920}
1998/10/05
Caterpillar Electronic Technician (ET) Version 2.4 Improves The Software FLASH Process For Engine Electronic Control Measures {0785,7610}
1999/07/19
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Electronic Control Module For 3408E And 3412E Engines {1901}
1999/08/30
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Introduction of New 3408E and 3412E Hydraulic Electronic Unit Injectors{1290, 1290, 1902, 7620}
Introduction of New 3408E and 3412E Hydraulic Electronic Unit Injectors{1290, 1290, 1902, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Letter-NACD
Product Support Program For Installing New Software On 3408E And 3412E Engines Used In D9R And D10R Track-type Tractors, 988FII And 990 Wheel Loaders, 769D, 771D, 773D And 775D Trucks And Tractors 631E, 633E, 637E, 651E And 657E Scrapers, 24H Motor Graders, 69D And 73D Trucks, PM565 Profilers, 834B Wheel Dozers And 836 Compactors
Product Support Program For Installing New Software On 3408E And 3412E Engines Used In D9R And D10R Track-type Tractors, 988FII And 990 Wheel Loaders, 769D, 771D, 773D And 775D Trucks And Tractors 631E, 633E, 637E, 651E And 657E Scrapers, 24H Motor Graders, 69D And 73D Trucks, PM565 Profilers, 834B Wheel Dozers And 836 Compactors
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Flashing New Software When Electronic Control Module (ECM) or Injectors Are Replaced
Flashing New Software When Electronic Control Module (ECM) or Injectors Are Replaced
Service Letter-China
Product Support Program For Installing New Software On 3408E And 3412E Engines Used In D9R And D10R Track-type Tractors, 988FII And 990 Wheel Loaders, 769D, 771D, 773D And 775D Trucks And Tractors 631E, 633E, 637E, 651E And 657E Scrapers, 24H Motor Graders, 69D And 73D Trucks, PM565 Profilers, 834B Wheel Dozers And 836 Compactors
Product Support Program For Installing New Software On 3408E And 3412E Engines Used In D9R And D10R Track-type Tractors, 988FII And 990 Wheel Loaders, 769D, 771D, 773D And 775D Trucks And Tractors 631E, 633E, 637E, 651E And 657E Scrapers, 24H Motor Graders, 69D And 73D Trucks, PM565 Profilers, 834B Wheel Dozers And 836 Compactors
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Speed/Timing Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Electronic Control Module - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Help Available For PC Based Service Tools Used For All Electronic Engines{1902}
1996/09/23
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Flash File Bulletin Board System To Be Discontinued {1920}
1998/10/05
Caterpillar Electronic Technician (ET) Version 2.4 Improves The Software FLASH Process For Engine Electronic Control Measures {0785,7610}
1999/07/19
Troubleshooting Hard Starting {1250}
1999/08/17
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Electronic Control Module For 3408E And 3412E Engines {1901}
1999/08/30
Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
2000/01/10
Subscriptions For Caterpillar Electronic Technician (ET) Software {7620}
2000/03/13
A New Test Electronic Control Module (ECM) Is Now Available {1901}
2000/07/24
The Value of the Low Idle Parameter Is Adjustable {1901}
2000/10/30
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
New Electronic Control Modules Used on Machine Engines {1901}
2002/10/21
New Flash Files are Available for Improved Starting in Cold Weather {7610, 7620}
2003/07/28
New Factory Password System for Caterpillar Engines {1000, 1900}
2005/03/07
Update on the Factory Password System {1901, 7620}
2008/02/11
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Caterpillar Electronic Technician (ET) Version 2.4 Improves The Software FLASH Process For Engine Electronic Control Measures {0785,7610}
1999/07/19
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Electronic Control Module For 3408E And 3412E Engines {1901}
1999/08/30
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Troubleshooting Guide Is Needed To Test The Grade/Slope System{7219,7569}
1996/02/26
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Procedure to Replace the Machine Control Software on Certain PM-565 Cold Planers{1408, 7620}
Procedure to Replace the Machine Control Software on Certain PM-565 Cold Planers{1408, 7620}
Procedure to Replace the Machine Control Software on Certain PM-565 and PM-565B Cold Planers{1408, 7620}
Procedure to Replace the Machine Control Software on Certain PM-565 and PM-565B Cold Planers{1408, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
Service Letter-Asia
Service Letter-APD
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Help Available For PC Based Service Tools Used For All Electronic Engines{1902}
1996/09/23
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Flash File Bulletin Board System To Be Discontinued {1920}
1998/10/05
Caterpillar Electronic Technician (ET) Version 2.4 Improves The Software FLASH Process For Engine Electronic Control Measures {0785,7610}
1999/07/19
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Electronic Control Module For 3408E And 3412E Engines {1901}
1999/08/30
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Flash Files are Available for Improved Starting in Cold Weather {7610, 7620}
2003/07/28
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
2008/05/19
A New Procedure is Available to Update the Machine Control Software for the Control of the Rotor on Certain Cold Planers {1408, 7620}
2010/01/28
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Specifications
Coolant Flow Switch
3408 VEHICULAR ENGINE
Disassembly and Assembly
Batteries
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Sensor
PM-565 COLD PLANER MACHINE SYSTEMS
Sensor Support
PM-565 COLD PLANER MACHINE SYSTEMS
Control Group-Backup
PM-565 COLD PLANER MACHINE SYSTEMS
Sonic Sensor Support
PM-565 & PM-565B COLD PLANER MACHINE SYSTEMS
Control Group-Backup
PM-565 & PM-565B COLD PLANER MACHINE SYSTEMS
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
New 24 Volt Amber Rotating Beacon {1431}
1993/03/01
How to Clean the Grade Sensor Transducer{5603}
1993/09/06
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Longer Battery Cable Improves Service Life of Battery Posts {1402}
1996/08/12
Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}
1996/09/16
Repair Centers For Sonic Grade Sensors Established {5645}
1997/01/27
Improved Coolant Flow Switches Available {7425}
1997/06/09
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
New Tool Makes Glow Plug Wire Removal Easier {0622,0621,1403}
1981/03/23
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
New 24 Volt Amber Rotating Beacon {1431}
1993/03/01
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}
1996/09/16
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Plunger Movement Must Be Adjusted When New Rack Shut-Off Solenoid Is Installed{1259}
1980/02/25
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New 100 Amp Alternators Available For Applications With Large Electrical Requirements{1405}
1992/02/17
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Help Available For PC Based Service Tools Used For All Electronic Engines{1902}
1996/09/23
Listing Of Deutsch Connector Components {0374,1408}
1997/11/24
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
An Improved Starting Motor is Now Available {1453}
2007/10/15
A New Starter Solenoid is Now Available {1467}
2008/03/17
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
Incorrect Output Signal from Rotary Position Sensor in Certain Cat Products{1913, 4809, 5737}
Specifications
Magnetic Pickup
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Engine Oil Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Coolant Temperature Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Speed/Timing Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Magnetic Pickup
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Testing and Adjusting
Speed Sensor - Adjust
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Propel Lever - Calibrate
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Front Steering Sensor - Calibrate
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Rear Steering Sensor - Calibrate
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Troubleshooting
CID 041 FMI F03
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 041 FMI F04
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 190 FMI F08
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 743 FMI F00
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 743 FMI F01
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 743 FMI F13
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 744 FMI F00
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 745 FMI F00
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 746 FMI F00
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 747 FMI F00
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 744 FMI F01
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 744 FMI F13
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 745 FMI F01
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 745 FMI F13
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 746 FMI F01
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 746 FMI F13
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 747 FMI F01
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 747 FMI F13
PM-565 and PM-565B Cold Planers Machine Electronic Control System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Sensor
PM-565 COLD PLANER MACHINE SYSTEMS
Sensor Support
PM-565 COLD PLANER MACHINE SYSTEMS
Sonic Sensor
PM-565 & PM-565B COLD PLANER MACHINE SYSTEMS
Sonic Sensor Support
PM-565 & PM-565B COLD PLANER MACHINE SYSTEMS
Turbocharger Outlet Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Speed/Timing Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Engine Oil Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Help Available For PC Based Service Tools Used For All Electronic Engines{1902}
1996/09/23
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Repair Centers For Sonic Grade Sensors Established {5645}
1997/01/27
Flash File Bulletin Board System To Be Discontinued {1920}
1998/10/05
Caterpillar Electronic Technician (ET) Version 2.4 Improves The Software FLASH Process For Engine Electronic Control Measures {0785,7610}
1999/07/19
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Electronic Control Module For 3408E And 3412E Engines {1901}
1999/08/30
A 201-1261 Transducer Kit Is Available For The Topcon 1G-8990 Sonic Grade Sensor Group and The 0R-4923 Sonic Grade Sensor Group {1408}
2001/02/19
A New Adapter is Used with the Pressure Sensor on the Rotor Clutch {1408, 3055}
2002/02/25
New Rotary Position Sensors Are Used {1400}
2002/07/29
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Improved Rotary Position Sensor Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {1439, 1913, 4806, 4809, 5736, 5737}
2012/07/11
Disassembly and Assembly
Governor Shutoff Solenoid
3408 VEHICULAR ENGINE
Governor Shutoff Solenoid
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Plunger Movement Must Be Adjusted When New Rack Shut-Off Solenoid Is Installed{1259}
1980/02/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Solenoid Valve
PM-565 COLD PLANER CONVEYOR SYSTEMS
Shutoff Solenoids
3408 VEHICULAR ENGINE
Starter Motor Solenoids
3408 VEHICULAR ENGINE
Starting Motor Solenoids
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Solenoid Valve (1st &amp; 2nd Stage Conveyor Assembly)
PM-565 COLD PLANER MACHINE SYSTEMS
Governor Shutoff Solenoid
3408 VEHICULAR ENGINE
Service Magazine
Plunger Movement Must Be Adjusted When New Rack Shut-Off Solenoid Is Installed{1259}
1980/02/25
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Specifications
Shutoff Solenoids
3408 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Shutoff Group
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Governor Shutoff Solenoid
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Specifications
Ether Starting Aid
3408 VEHICULAR ENGINE
Ether Starting Aid
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
New Tool Makes Glow Plug Wire Removal Easier {0622,0621,1403}
1981/03/23
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/24
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starter Motors
3408 VEHICULAR ENGINE
Starter Motor Solenoids
3408 VEHICULAR ENGINE
Starting Motor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Starting Motor Solenoids
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor
3408E and 3412E Engines for Caterpillar Built Machines
Electric Starting Motor
3408E and 3412E Engines for Caterpillar Built Machines
Electric Starting Motor
3408E and 3412E Engines for Caterpillar Built Machines
Electric Starting Motor
3408E and 3412E Engines for Caterpillar Built Machines
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Testing and Adjusting
Electric Starting System - Test
3408E and 3412E Engines for Caterpillar Built Machines
Pinion Clearance - Adjust
3408E and 3412E Engines for Caterpillar Built Machines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Starter
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Starter
3408E ENGINE SUPPLEMENT FOR PM-565 & PM-565B COLD PLANER
Electric Starting Motor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Technical Information Bulletin
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Specifications
Coolant Flow Switch
3408 VEHICULAR ENGINE
Coolant Flow Switch
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Coolant Flow Switch
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}
1996/09/16
Improved Coolant Flow Switches Available {7425}
1997/06/09
Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
2003/10/27
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/08/03
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/01
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Starting Motor - Delco 50-MT
Service Tools
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Service Tools
Product Link - PL522/523
Service Tools
Product Link 121S/300
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
How to Clean the Grade Sensor Transducer{5603}
1993/09/06
Caterpillar Electronic Technician (ET) Version 2.4 Improves The Software FLASH Process For Engine Electronic Control Measures {0785,7610}
1999/07/19
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/01
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/09/25
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Specifications
Solenoid Control Valve
PM-565 & PM-565B COLD PLANERS WATER SPRAY SYSTEM
Disassembly and Assembly
Solenoid Valve (1st &amp; 2nd Stage Conveyor Assembly)
PM-565 COLD PLANER MACHINE SYSTEMS
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}
Systems Operation
Backup Alarm
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Service Magazine
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Installation of the HEUI Wiring Harness{1251, 1408, 1714}
Installation of the HEUI Wiring Harness{1251, 1408, 1714}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Procedure to Replace Machine Control Software on Cold Planers{7620}
Procedure to Replace Machine Control Software on Cold Planers{7620}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Procedure to Replace the Machine Control Software on Certain PM-565 Cold Planers{1408, 7620}
Procedure to Replace the Machine Control Software on Certain PM-565 Cold Planers{1408, 7620}
Procedure to Replace the Machine Control Software on Certain PM-565 and PM-565B Cold Planers{1408, 7620}
Procedure to Replace the Machine Control Software on Certain PM-565 and PM-565B Cold Planers{1408, 7620}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Technical Information Bulletin
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Specifications
Unit Injector Wiring
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Systems Operation
Cat Data Link
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Relays
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Electronic Control Module (ECM)
PM-565 and PM-565B Cold Planers Machine Electronic Control System
General Information
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Computerized Monitoring System
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Switches
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Propel Control
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Load Control
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Steering Control
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Rotor Control
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Water Spray Control
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Diagnostic Operation
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE OF ON CERTAIN PM-565 AND PM-565B COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING MACHINE CONTROL SOFTWARE ON CERTAIN PM-565 AND PM-565B MODEL COLD PLANERS
Testing and Adjusting
Electric Starting System - Test
3408E and 3412E Engines for Caterpillar Built Machines
Electrical Connector - Inspect
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Electronic Control Module (ECM) - Replace
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Propel Lever - Calibrate
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Rotor Mode Switch - Calibrate
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Calibration
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Steering Mode Switch - Calibrate
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
Troubleshooting
Connector Locations
PM-565 and PM-565B Cold Planers Machine Electronic Control System
General Information
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Determining Diagnostic Codes
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 070 FMI F02
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 168 FMI F03
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 168 FMI F04
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 322 FMI F03
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 322 FMI F05
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 322 FMI F06
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 623 FMI F02
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 637 FMI F03
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 637 FMI F05
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 637 FMI F06
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Power Supply Circuit of Electronic Control Module
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 755 FMI F03
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 755 FMI F06
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 755 FMI F05
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 748 FMI F02
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 749 FMI F02
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 750 FMI F02
PM-565 and PM-565B Cold Planers Machine Electronic Control System
CID 751 FMI F02
PM-565 and PM-565B Cold Planers Machine Electronic Control System
Diagnostic Code List
PM-565 and PM-565B Cold Planers Machine Electronic Control System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
New Tool Makes Glow Plug Wire Removal Easier {0622,0621,1403}
1981/03/23
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}
1996/09/16
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Repair Centers For Sonic Grade Sensors Established {5645}
1997/01/27
Improved Coolant Flow Switches Available {7425}
1997/06/09
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Electronic Control Module For 3408E And 3412E Engines {1901}
1999/08/30
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23
New Injector Wiring Harnesses Are Color Coded {1251, 1408}
2000/08/21
A New Wiring Harness Is Available {1408}
2000/09/11
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service Magazine Article Retraction. {0000}
2003/02/03
The Main Power Relay Has Improved Sealing {1423}
2002/11/18
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
A New Procedure is Available to Update Software for the Control of the Rotor on Cold Planers {7620}
2008/03/24
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
A New Procedure is Available to Update the Machine Control Software for the Control of the Rotor on Certain Cold Planers {1408, 7620}
2010/01/28
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Special Instruction
Installing the 6I1864 12 VDC, 6I1868 24 VDC, and 6I1908 32 VDC Relay Kit{1422, 1423}
Installing the 6I1864 12 VDC, 6I1868 24 VDC, and 6I1908 32 VDC Relay Kit{1422, 1423}
Service Magazine
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Of Operator ID System on Cat<SUP>&reg;</SUP> and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Technical Information Bulletin
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Caterpillar Electronic Technician (ET) Version 2.4 Improves The Software FLASH Process For Engine Electronic Control Measures {0785,7610}
1999/07/19
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Service Magazine Article Retraction. {0000}
2003/02/03
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/11/28
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Version of Product Link Available {7602}
2001/08/27
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
New Flexible Antenna Whip Available for Product Link {7606}
2002/12/02

Truck sale:

CATERPILLAR PM-565 1995
 
CATERPILLAR PM-565 1995
- COLD PLANERS
ATLANTIC CAT
175 Akerley Blvd - Dartmouth - Nova Sc
2003 CAT PM-565
Call 
2003 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $55,000 
1993 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $65,000 
1993 CAT PM-565

PARK EAST SALES
Troy, New York
 
USD $41,000 
1997 CAT PM-565

Big D Heavy Equipment LLC
Dallas, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.