AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

RM-350 SM-350 Reclaimer, Stabilizer Mixer 1RM00060-UP (MACHINE) POWERED BY 3406C Engine AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



STABILIZER MIXER SM-350 STABILIZER MIXER 1RM
 RM-350 SM-350 Reclaimer, Stabilizer Mixer 1RM00060-UP (MACHINE) POWERED BY 3406C Engine KEBP0184 SM-350 1RM   (1993)

Parts group SM-350:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
AFTERCOOLER GP-WATER
1W-8347 AFTERCOOLER GP-WATER
1W-8347 AFTERCOOLER GP-WATER
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
KIT-AFTERCOOLER GASKET
434-0877 KIT-AFTERCOOLER GASKET
434-0877 KIT-AFTERCOOLER GASKET
S/N 5FK104-UP; 1RM60-UP
CONTAINS THE GASKETS AND SEALS TO INSTALL THE AFTERCOOLER AND ATTACHING LINES
FIELD INSTALLATION
AIR CLEANER GP
AIR CLEANER GP
107-1130 AIR CLEANER GP
107-1130 AIR CLEANER GP
S/N 5FK104-UP; 1RM60-UP
PART OF 107-1128 INSTALLATION AR-ENGINE
AIR CLEANER GP
114-0330 AIR CLEANER GP
114-0330 AIR CLEANER GP
S/N 5FK104-UP; 1RM60-UP
PART OF 107-1128 INSTALLATION AR-ENGINE
AIR CLEANER GP
6I-2588 AIR CLEANER GP
6I-2588 AIR CLEANER GP
S/N 5FK104-UP; 1RM60-UP
PART OF 114-0330 AIR CLEANER GP
PRECLEANER GP
7N-5974 PRECLEANER GP
7N-5974 PRECLEANER GP -AIR CLEANER
S/N 5FK104-UP; 1RM60-UP
179-MM (7.0-IN) ID, PART OF EXHAUST AUGMENTED HEAVY DUTY AIR CLEANER SYSTEM
PART OF 107-1130, 114-0330 AIR CLEANER GP
LINES GP-AIR
LINES GP-AIR
6I-4672 LINES GP-AIR
6I-4672 LINES GP-AIR
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
4N-0754 MANIFOLD GP-EXHAUST
4N-0754 MANIFOLD GP-EXHAUST
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
SHIELD GP-MANIFOLD
101-9052 SHIELD GP-MANIFOLD
101-9052 SHIELD GP-MANIFOLD
S/N 41Z19451-UP
PART OF 130-6536 ENGINE AR
SHIELD GP-MANIFOLD
9L-6671 SHIELD GP-MANIFOLD
9L-6671 SHIELD GP-MANIFOLD
S/N 41Z257-19450
PART OF 130-6536 ENGINE AR
MUFFLER GP
MUFFLER GP
107-1131 MUFFLER GP
107-1131 MUFFLER GP
S/N 5FK104-UP; 1RM60-UP
PART OF 107-1128 INSTALLATION AR-ENGINE
MUFFLER GP
114-0331 MUFFLER GP
114-0331 MUFFLER GP
S/N 5FK104-UP; 1RM60-UP
PART OF 107-1128 INSTALLATION AR-ENGINE
TURBOCHARGER GP
TURBOCHARGER GP
130-5469 TURBOCHARGER GP
130-5469 TURBOCHARGER GP -AIR INLET
S/N 41Z257-UP
PART OF 130-5622 TURBOCHARGER GP
TURBOCHARGER GP
130-5622 TURBOCHARGER GP
130-5622 TURBOCHARGER GP -ENGINE
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR

Information:

(For parts list, see above)

Service Letter-NACD
Product Support Program For Adding A Spacer To The Aftercooler Water Lines On Certain 824C And 824G Wheel Tractors, 825C, 825G, 826C, 826G Compactors, 621F, 623F, 627F Wheel Tractor Scrapers, 16H Motor Graders, 980G Wheel Loaders, SS250B Soil Stabilizers, RR250B Reclaimers, SM350 Stabilizer Mixer, And RM350 Reclaimer Mixers
Product Support Program For Adding A Spacer To The Aftercooler Water Lines On Certain 824C And 824G Wheel Tractors, 825C, 825G, 826C, 826G Compactors, 621F, 623F, 627F Wheel Tractor Scrapers, 16H Motor Graders, 980G Wheel Loaders, SS250B Soil Stabilizers, RR250B Reclaimers, SM350 Stabilizer Mixer, And RM350 Reclaimer Mixers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Aftercooler
3406B INDUSTRIAL & MARINE ENGINES
Aftercooler
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
Product Support Program For Adding A Spacer To The Aftercooler Water Lines On Certain 824C And 824G Wheel Tractors, 825C, 825G, 826C, 826G Compactors, 621F, 623F, 627F Wheel Tractor Scrapers, 16H Motor Graders, 980G Wheel Loaders, SS250B Soil Stabilizers, RR250B Reclaimers, SM350 Stabilizer Mixer, And RM350 Reclaimer Mixers
Product Support Program For Adding A Spacer To The Aftercooler Water Lines On Certain 824C And 824G Wheel Tractors, 825C, 825G, 826C, 826G Compactors, 621F, 623F, 627F Wheel Tractor Scrapers, 16H Motor Graders, 980G Wheel Loaders, SS250B Soil Stabilizers, RR250B Reclaimers, SM350 Stabilizer Mixer, And RM350 Reclaimer Mixers
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Sea Water Pump
3406B INDUSTRIAL & MARINE ENGINES
Aftercooler Core
3406B INDUSTRIAL & MARINE ENGINES
Aftercooler Housing
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Special Instruction
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Dust Ejector Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Air Cleaner
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Air Cleaner
3406 ENGINE SUPPLEMENT FOR RM-350 RECLAIMER MIXER AND SM-350
Air Cleaner
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Exhaust Manifold Shield
3406B INDUSTRIAL & MARINE ENGINES
Exhaust Manifold Shield
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Elbow Adapter Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Extension Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Disassembly and Assembly
Muffler
3406 ENGINE SUPPLEMENT FOR RM-350 RECLAIMER MIXER AND SM-350
Service Magazine
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Disassembly and Assembly
Air Cleaner
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Exhaust Manifold
3406B INDUSTRIAL & MARINE ENGINES
Exhaust Manifold Shield
3406B INDUSTRIAL & MARINE ENGINES
Exhaust Manifold
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Manifold Shield
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Exhaust Manifold
3406B INDUSTRIAL & MARINE ENGINES
Exhaust Manifold
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
New Exhaust Manifold End And Center Sections Used In Dry Type Exhaust Manifold Groups{1059}
1993/07/26
Stainless Steel Sleeve Assemblies Used In Exhaust Ports {1059}
1996/06/10
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
2000/10/16
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Exhaust Manifold End And Center Sections Used In Dry Type Exhaust Manifold Groups{1059}
1993/07/26
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Specifications
Muffler and Ejector Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Muffler
3406 ENGINE SUPPLEMENT FOR RM-350 RECLAIMER MIXER AND SM-350
Service Magazine
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (T04B91, TW4B91 and TW4C01)
3406B INDUSTRIAL & MARINE ENGINES
Turbochargers<BR> (TV72 &amp; TV78)
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (T12)
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger TW81
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger TV81
3406B INDUSTRIAL & MARINE ENGINES
Turbochargers<BR> (Schwitzer F552 &amp; F555)
3406B INDUSTRIAL & MARINE ENGINES
Turbochargers<BR> (Schwitzer 4MFW 701, 4MFW 711, 4MF 721 &amp; 4MFW 731)
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
Disassembly and Assembly
Turbocharger
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Tool Operating Manual
Compact DPF Cleaner{0599, 0701, 0702, 108F}
Compact DPF Cleaner{0599, 0701, 0702, 108F}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
Service Magazine
Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
2012/09/11

Truck sale:

CATERPILLAR SM-350 1995
 
CATERPILLAR SM-350 1995
- STABILIZERS / RECLAIMERS
MANTRAC NIGERIA LTD
Nigeria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.