AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

RM-350 SM-350 Reclaimer, Stabilizer Mixer 1RM00060-UP (MACHINE) POWERED BY 3406C Engine LUBRICATION SYSTEM Caterpillar SIS



STABILIZER MIXER SM-350 STABILIZER MIXER 1RM
 RM-350 SM-350 Reclaimer, Stabilizer Mixer 1RM00060-UP (MACHINE) POWERED BY 3406C Engine KEBP0184 SM-350 1RM   (1993)

Parts group SM-350:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
BREATHER GP
9Y-2989 BREATHER GP
9Y-2989 BREATHER GP
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
FOR USE WITH OPEN FUMES DISPOSAL
FILLER GP-ENGINE OIL
FILLER GP-ENGINE OIL
2W-7201 FILLER GP-ENGINE OIL
2W-7201 FILLER GP-ENGINE OIL
S/N 41Z257-UP
LEFT HAND
PART OF 130-6536 ENGINE AR
FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
4N-0745 FILTER GP-ENGINE OIL
4N-0745 FILTER GP-ENGINE OIL
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
FUMES DISPOSAL GP
FUMES DISPOSAL GP
4N-1288 FUMES DISPOSAL GP
4N-1288 FUMES DISPOSAL GP
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-9951 GAUGE GP-OIL LEVEL (DIPSTICK)
4N-9951 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N 41Z257-UP
LH
PART OF 130-6536 ENGINE AR
FOR USE WITH FRONT OR REAR SUMP STANDARD OIL PAN
LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
4N-2293 LINES GP-ENGINE OIL
4N-2293 LINES GP-ENGINE OIL
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-2465 LINES GP-TURBOCHARGER OIL
4N-2465 LINES GP-TURBOCHARGER OIL
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
PUMP GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING -ENGINE
S/N 41Z257-UP
PART OF 130-6536 ENGINE AR
PUMP GP-ENGINE OIL
161-4111 PUMP GP-ENGINE OIL
161-4111 PUMP GP-ENGINE OIL
S/N 41Z19451-UP
PART OF 130-6536 ENGINE AR
PUMP GP-ENGINE OIL
4N-0733 PUMP GP-ENGINE OIL
4N-0733 PUMP GP-ENGINE OIL
S/N 41Z257-19450
PART OF 130-6536 ENGINE AR

Information:

(For parts list, see above)

Specifications
Breather Cap
3406B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Filler Group
3406 ENGINE SUPPLEMENT FOR RM-350 RECLAIMER MIXER AND SM-350
Service Magazine
A New Oil Filler Tube and New Oil Filler Cap are Now Available {1316}
2003/12/01
Special Instruction
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Oil Filter
3406B INDUSTRIAL & MARINE ENGINES
Oil Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Cooler Bypass Valve
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Disassembly and Assembly
Fuel Filter Base
3406B INDUSTRIAL & MARINE ENGINES
Oil Filter Base
3406B INDUSTRIAL & MARINE ENGINES
Oil Filter & Base Assembly
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/22
New High Efficiency Oil Filters are Now Available {1308}
2006/07/03
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Specifications
Oil Filter
3406B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Piston Cooling Tubes
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Special Instruction
Installation and Operation of the Cat QuickEvac<SUP>TM</SUP> System{0707, 1325}
Installation and Operation of the Cat QuickEvacTM System{0707, 1325}
Supplement to the Operation and Maintenance Manual{0707}
Supplement to the Operation and Maintenance Manual{0707}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New Cat QuickEvac<SUP>TM</SUP> High Speed Oil Change Arrangements Are Available {1302, 1372}
2003/03/10
New QuickEvac High Speed Oil Change Arrangements Are Available {1325}
2003/05/05
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Disassembly and Assembly
Sump Pump
3406B INDUSTRIAL & MARINE ENGINES
Engine News
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Special Instruction
3400 Engine Oil Pumps{1304}
3400 Engine Oil Pumps{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Technical Information Bulletin
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Specifications
Oil Pump
3406B INDUSTRIAL & MARINE ENGINES
Oil Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Disassembly and Assembly
Sump Pump
3406B INDUSTRIAL & MARINE ENGINES
Oil Pump
3406B INDUSTRIAL & MARINE ENGINES
Oil Pump
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
New Oil Pump Gears Used {1304}
1986/07/07
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
Different Housings are Used on 3400 Remanufactured Engines {1304}
2007/04/02
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Disassembly and Assembly
Sump Pump
3406B INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Disassembly and Assembly
Sump Pump
3406B INDUSTRIAL & MARINE ENGINES
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2005/01/17
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

CATERPILLAR SM-350 1995
 
CATERPILLAR SM-350 1995
- STABILIZERS / RECLAIMERS
MANTRAC NIGERIA LTD
Nigeria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.