AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

132-0974 PUMP & LINES GP-HYDRAULIC S/N 5FK104-UP; 1RM60-UP PART OF 107-1145 HYDRAULIC AR-AUXILIARY SM-350


HYDRAULIC SYSTEM
PUMP GP
TANK GP
VALVE GP

STABILIZER MIXER SM-350 STABILIZER MIXER 1RM
 RM-350 SM-350 Reclaimer, Stabilizer Mixer 1RM00060-UP (MACHINE) POWERED BY 3406C Engine KEBP0184 SM-350 1RM   (1993)

HYDRAULIC SYSTEM

PUMP GP
107-1141 HYDRAULIC AR-AUXILIARY
107-1145 HYDRAULIC AR-AUXILIARY
PUMP & LINES GP-HYDRAULIC
132-0974 PUMP & LINES GP-HYDRAULIC
PUMP GP-GEAR
110-2399 PUMP GP-GEAR
PUMP GP-GEAR
135-2689 PUMP GP-GEAR
PUMP GP-GEAR
135-2689 PUMP GP-GEAR
 

#KEBP01840330
 

132-0974: PUMP & LINES GP-HYDRAULIC

132-0974 PUMP & LINES GP-HYDRAULIC
S/N 5FK104-UP; 1RM60-UP
PART OF 107-1145 HYDRAULIC AR-AUXILIARY
i00511906 KEBP0184
1320974 PUMP & LINES GP-HYDRAULIC Parts scheme 1320974 PUMP & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-7365 I [1] HOSE AS  
2. 132-6548 I [1] HOSE AS  
3. 110-2008 I [1] HOSE AS  
4. 132-6550 I [1] HOSE AS  
5. 110-1978 I [1] HOSE AS  
6. 110-2000 I [1] HOSE AS  
7. 132-7364 I [1] HOSE AS  
8. 6V-9009 [1] ELBOW  
9. 8V-7764 [2] ADAPTER-O-RING  
10. 6V-8635 [1] CONNECTOR  
11. 6V-8400 [4] SEAL-O-RING  
12. 5K-9090 [5] SEAL-O-RING  
13. 6K-6307 [2] SEAL-O-RING  
14. 2S-4078 [1] SEAL-O-RING  
15. 7M-8485 [3] SEAL-O-RING  
16. 6V-8398 [2] SEAL-O-RING  
17. 7R-7954 [1] PLATE  
18. 7R-7959 [2] BOLT-SPECIAL (1/4-20X1.12-IN)  
19. 7R-7908 [2] CLAMP  
20. 6V-8185 [4] NUT (1/4-20-THD)  
21. 7R-7955 [1] PLATE (SLOTTED)  
22. 7R-7960 [2] BOLT (1/4-20X2-IN)  
23. 7R-7940 [2] CLAMP  
24. 7R-7941 [2] CLAMP  
25. 7R-7951 [2] PLATE  
26. 7X-0264 [2] BOLT (1/4-20X2.5-IN)  
27. 109-1666 Y [1] PUMP GP-PISTON  
28. 106-1486 [1] ADAPTER-SPLINED  
29. 1J-6474 [1] RING-RETAINING (EXTERNAL)  
30. 2H-3934 [1] SEAL-O-RING  
31. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
32. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 121-7035 Y [1] VALVE GP-CONTROL  
34. 3P-9900 [4] WASHER (10.5X30X3-MM THK)  
35. 5S-7382 [4] BOLT (3/8-16X1.375-IN)  
36. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
37. 6V-0852 [2] CAP-DUST  
38. 3J-1907 [3] SEAL-O-RING  
39. 6R-2678 [2] CLAMP  
40. 6V-9173 [1] NUT-BULKHEAD (1-11/16-12-THD)  
41. 110-9160 [1] UNION  
42. 5P-2955 [1] BOLT (5/16-18X2.5-IN)  
43. 8C-3364 [1] ELBOW  
44. 6V-9182 [1] ELBOW  
45. 6V-9007 [3] ELBOW  
46. 6V-9873 [1] CONNECTOR  
47. 6V-8714 [1] CONNECTOR  
48. 6V-9854 [1] ELBOW (SWIVEL)  
49. 6V-8998 [1] UNION  
50. 6V-9172 [1] NUT (1-7/16-12-THD)  
51. 9V-8409 [2] CLAMP  
52. 3D-2824 [4] SEAL-O-RING  
53. 077-3129 [4] MOUNT-FLEXIBLE  
54. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
55. 174-7912 [3] MOUNT-FLEXIBLE  
56. 7V-6234 [1] PLATE  
57. 6V-9746 [4] SEAL-O-RING  
58. 1G-5377 [1] FILTER GP-OIL  
  132-2860 [1] INDICATOR  
  1G-5459 [1] FILTER ELEMENT-OIL (STANDARD EFFICIENCY)  
  127-8586 [1] SEAL-O-RING  
59. 7X-0265 [2] BOLT (1/4-20X2.75-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP01840331
 

110-2399: PUMP GP-GEAR

110-2399 PUMP GP-GEAR
S/N 5FK104-124; 1RM60-UP
PART OF 134-1940 LINES GP-POWER TRAIN OIL
i00494639 KEBP0184
1102399 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [4] PIN-DOWEL  
2. 113-3329 [1] GEAR-DRIVE  
3. 113-3327 [2] BEARING-BUSHING  
4. 113-3321 [1] SEAL-SHAFT  
5. 113-3322 [1] RING-SNAP  
6. 113-3320 [16] SCREW-HEX HEAD  
7. 113-3328 [1] GEAR-IDLER  
8. J [2] RING  
9. J [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  113-3323 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#KEBP01840332
 

135-2689: PUMP GP-GEAR

135-2689 PUMP GP-GEAR -ROTOR
S/N 5FK125-UP; 1RM60-UP
PART OF 134-1940 LINES GP-POWER TRAIN OIL
Type 1
i00782600 KEBP0184
1352689 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-3321 J [1] SEAL-SHAFT  
2. 113-3329 [1] GEAR-DRIVE  
3. 152-8284 [4] PIN-DOWEL  
4. 152-7958 [2] BLOCK-BEARING  
5. 113-3320 [16] SCREW-HEX HEAD  
6. 113-3328 [1] GEAR-IDLER  
7. 152-8281 J [4] WASHER  
8. 113-3322 [1] RING-SNAP  
   
    AVAILABLE REPAIR KIT(S):
  113-3323 J [1] KIT-SEAL (GEAR PUMP)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#KEBP01840333
 

135-2689: PUMP GP-GEAR

135-2689 PUMP GP-GEAR -ROTOR
S/N 5FK125-UP; 1RM60-UP
PART OF 134-1940 LINES GP-POWER TRAIN OIL
Type 2
i05358447 KEBP0184
1352689 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-3321 J [1] SEAL-SHAFT  
2. 6V-7723 C [1] RING-RETAINING  
3. 152-8284 [4] PIN-DOWEL  
4. 152-8281 J [4] WASHER  
5. 8T-0271 CM [16] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  113-3323 J [1] KIT-SEAL (GEAR PUMP)  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP01840334
 

109-0900: PUMP GP-PISTON

109-0900 PUMP GP-PISTON
S/N 5FK104-UP; 1RM60-UP
PART OF 109-1667 PUMP & MTG GP-PROPEL
i00488314 KEBP0184
1090900 PUMP GP-PISTON Parts scheme 1090900 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-8580 WM [4] BOLT-SOCKET HEAD (M5X0.8X16-MM)  
2. 5E-8747 NS [2] VALVE-CHECK  
3. 8L-2779 W [2] SEAL-O-RING  
4. 033-6033 W [1] SEAL-O-RING  
5. 5P-5600 W [1] SEAL-O-RING  
6. 5E-8771 H [1] SEAL-O-RING  
7. 8T-9534 SM [6] BOLT (M6X1X50-MM)  
8. 123-5208 S [1] GASKET-CONTROL  
9. 098-3039 [1] WASHER (8.33X15X2.12-MM THK)  
10. 5E-8742 N [1] SPRING  
11. 5E-8755 N [1] RETAINER-SPRING  
12. 6V-8837 M [6] BOLT (M6X1X16-MM)  
13. 9S-8004 [7] PLUG (9/16-18-THD)  
14. 3J-1907 [10] SEAL-O-RING  
15. 5E-8768 L [2] SEAL-O-RING  
16. 6V-8676 L [2] SEAL-O-RING  
17. 7R-3388 H [1] FLANGE  
18. 6V-5215 LM [6] BOLT (M8X1.25X16-MM)  
19. 7X-9232 [3] PLUG-VENT (CONTROL SCREEN)  
20. 5E-8773 [2] PIN  
21. 077-8353 [2] PIN (SPRING)  
22. 1G-5759 P [2] RING  
23. 6J-2419 P [2] SEAL-O-RING  
24. 6V-1320 H [1] SEAL-O-RING  
25. 9S-8008 [2] PLUG (1-1/16-12-THD)  
26. 3D-2824 [2] SEAL-O-RING  
27. 158-3414 [1] LEVELER  
28. 5E-8741 [2] POST-GUIDE  
29. 1G-5757 [2] SEAT  
30. 1G-5758 [2] SPRING  
31. 6R-1714 [2] SHIM  
32. 1G-5763 [1] SEAL-O-RING  
33. 1G-8026 H [4] WASHER (17X30X4-MM THK)  
34. 115-7418 [1] PLATE-RETAINER  
35. 132-6697 M [6] BOLT (M8X1.25X20-MM)  
36. 5E-8765 [2] NUT  
37. 1G-5744 [1] BEARING  
38. 1G-5755 [1] PIN  
39. 5E-8740 [1] CAGE-LINK  
40. 5E-8715 [1] LINK  
41. 108-3002 [1] BLOCK-SLIDER  
42. 108-3001 [1] SWASHPLATE  
43. 5E-8738 [1] SPRING  
44. 1G-8028 [1] SHAFT  
45. 1G-5737 [1] BEARING  
46. 2L-6965 [1] RING-RETAINING  
47. 6V-3834 [1] SEAL-O-RING  
48. 1G-5736 [1] SEAL-LIP TYPE  
49. 115-7417 [1] SEAL-CARRIER  
50. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
51. 1G-8027 H [4] SCREW  
52. 5E-8760 [1] PLATE-RETAINING  
53. 109-5166 H [1] COVER-CHARGE  
    (INCLUDES BUSHING)
54. 1G-9198 H [1] COUPLING  
55. 109-5164 [1] PUMP-CHARGE  
56. 1G-5767 [1] PIN  
57. 7R-3453 [1] KEY-WOODRUFF  
58. 109-5165 [1] SHAFT-CHARGE  
59. 5E-8743 H [2] BUSHING-TERMINAL  
60. 3J-7354 [2] SEAL-O-RING  
61. 9S-8002 [2] PLUG (7/16-20-THD)  
62. 133-9210 J [1] PLATE-VALVE  
63. 1G-5764 [1] BEARING  
64. 9S-4191 [3] PLUG (9/16-18-THD)  
65. 108-3003 [1] GASKET-END CAP  
66. 6R-1702 T [1] NUT-SPECIAL (7/8-14-THD)  
67. 6R-1704 T [1] PLUG AS  
68. 2M-9780 T [1] SEAL-O-RING  
69. 5E-8748 T [1] SPRING  
70. 6R-1703 T [1] POPPET  
71. 7X-9294 [1] COVER  
72. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
73. 8T-0338 M [2] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
74. 7R-3394 [1] FITTING  
75. 5E-8777 [2] PLUG  
76. 030-4605 V [2] SEAL-O-RING  
77. 5E-9816 V [2] SEAL-O-RING  
78. WZ [1] KIT-SOLENOID (PUMP CONTROL)  
79. SZ [1] COVER  
80. Z [1] SPACER  
81. Z [1] SPRING-LEAF  
82. VZ [2] VALVE  
83. Z [2] COVER (FRONT)  
84. JZ [1] RING  
85. JZ [1] RETAINER  
86. JZ [1] SPRING  
87. JZ [1] SEAT-SPRING  
88. JZ [1] CYLINDER BLOCK  
89. JZ [4] SPACER  
90. JZ [4] WASHER  
91. JZ [4] BOLT  
92. JZ [9] PISTON AS  
93. JZ [2] GUIDE-BEARING  
94. JZ [1] GUIDE  
95. Z [1] COVER (SIDE)  
96. Z [1] HOUSING  
97. LZ [2] SLEEVE  
98. PZ [1] PISTON  
99. NZ [1] VALVE-CHECK  
   
    AVAILABLE REPAIR KIT(S):
  1G-9327 L [1] KIT-SLEEVE  
  1G-9326 N [1] KIT-ORIFICE  
  1G-5770 S [1] KIT-ELECT DISPLACEMENT CONTROL  
  108-3005 P [1] KIT-SERVO PISTON  
  7R-3825 T [1] KIT-RELIEF VALVE  
  108-3004 H [1] KIT-AUXILIARY FLANGE  
  1G-5772 J [1] KIT-PISTON BLOCK  
  5E-8751 V [2] KIT-VALVE  
  6R-1701 W [1] VALVE  
  H   KIT MARKED H INCLUDES PART(S) MARKED H
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L INCLUDES PART(S) MARKED L
  M   METRIC PART
  N   KIT MARKED N INCLUDES PART(S) MARKED N
  P   KIT MARKED P INCLUDES PART(S) MARKED P
  S   KIT MARKED S INCLUDES PART(S) MARKED S
  T   KIT MARKED T INCLUDES PART(S) MARKED T
  V   KIT MARKED V INCLUDES PART(S) MARKED V
  W   KIT MARKED W INCLUDES PART(S) MARKED W
  Z   NOT SERVICED SEPARATELY
 

#KEBP01840335
 

109-1666: PUMP GP-PISTON

109-1666 PUMP GP-PISTON
S/N 5FK104-UP; 1RM60-UP
PART OF 132-0974 PUMP & LINES GP-HYDRAULIC
i00489519 KEBP0184
1091666 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2011 [8] SCREW-MACHINE (1/4-20X0.5-IN)  
2. 9T-2014 [2] COVER  
3. 9T-2011 B [2] SHIM PACK  
4. 005-8593 J [2] SEAL-O-RING  
5. 9T-2017 [2] SPACER (12.2-MM THK)  
6. 3P-8680 [2] CUP-BEARING  
7. 087-1666 [6] SCREW  
8. 9T-1752 J [1] GASKET  
9. 7T-9754 [1] CONE-BEARING  
10. 9T-2168 [1] SPRING  
11. 9T-2171 [1] SEAT  
12. 9T-2173 [1] SEAT  
13. 8J-8308 [1] PIN-ROLL  
14. 9T-2231 [1] SWASHPLATE  
15. 9T-2172 [1] PISTON  
16. 9T-2170 [1] ROD-PISTON  
17. 8F-9206 J [1] SEAL-O-RING  
18. 7T-9831 [2] CONE-BEARING  
19. 109-3632 [1] PLATE-VALVE  
20. 7T-9752 [1] CONE-BEARING  
21. 9F-2247 [1] PLUG-PIPE  
22. 069-1745 [1] PLUG  
23. 054-3433 J [1] SEAL  
24. 255-4865 Y [1] VALVE GP-PUMP CONTROL (PRESSURE AND FLOW COMPENSATOR)  
25. 5F-9144 J [1] SEAL-O-RING  
26. 9T-2002 J [1] GASKET  
27. 9T-2001 [1] PIN  
28. 8T-5089 [2] PIN-SPRING  
29. 9T-3867 [1] SPRING  
30. 9T-1710 [1] POPPET  
31. 9T-1636 [1] SEAT  
32. 9T-2000 B [1] KIT-SPACER (AUXILIARY PUMP)  
33. 1G-9785 [1] SHAFT  
34. 9T-8248 Y [1] ROTATING GP-PUMP  
35. 7T-9753 [1] CUP-BEARING  
36. 8Q-2979 [1] RING  
37. 8T-5040 J [1] SEAL-LIP TYPE  
38. 7T-9755 [1] CUP-BEARING  
39. 9H-1113 [1] RING-RETAINING  
40. 7L-0688 [4] BOLT-SOCKET HEAD (10-24X1.2-IN)  
   
    AVAILABLE REPAIR KIT(S):
  1G-9660 J [1] KIT-SEAL (AUXILIARY PUMP)  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#KEBP01840336
 

110-8045: PUMP GP-PISTON

110-8045 PUMP GP-PISTON -HYDRAULIC
S/N 5FK104-UP; 1RM60-UP
PART OF 110-4321 PUMP & MTG GP-HYDRAULIC
AN ATTACHMENT
i00472229 KEBP0184
1108045 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-3873 [1] RING-RETAINING  
2. 116-1335 [1] CARRIER-SHAFT  
3. 1G-7357 [1] SEAL-LIP TYPE  
4. 6V-1196 [1] SEAL-O-RING  
5. 5L-4019 T [1] RING-RETAINING  
6. 165-9126 T [1] BEARING-ROLLER  
8. 2S-1564 T [1] BEARING-ROLLER  
9. 116-1436 L [9] PISTON  
10. 116-1437 L [1] RETAINER  
12. 116-1441 L [1] GUIDE  
13. 165-9762 L [3] PIN (HOLD DOWN)  
14. 116-1442 L [1] PIN-RETAINING  
16. 116-1447 L [1] WASHER (24X37.5X2-MM THK)  
17. 116-1446 L [1] SPRING-CYLINDER  
18. 116-1444 L [1] WASHER-SPECIAL  
19. 116-4118 L [1] RING-RETAINING  
20. 116-1367 L [1] PLATE  
21. 116-1434 [1] GASKET  
22. 116-3881 [15] SCREW (M6X1X20-MM)  
23. 9S-4191 [6] PLUG (9/16-18-THD)  
24. 3J-1907 [7] SEAL-O-RING  
26. 9S-8008 [2] PLUG (1-1/16-12-THD)  
27. 3D-2824 [2] SEAL-O-RING  
28. 116-3883 [1] NUT-SEAL  
30. 7X-5448 H [1] KIT-PISTON RING  
    (INCLUDES SEAL-O-RING)
32. 4L-7711 H [2] SEAL-O-RING  
35. 2M-9780 P [2] SEAL-O-RING  
36. 7X-5453 P [2] RING-BACKUP  
37. 7J-9108 P [2] SEAL-O-RING  
39. 116-3878 N [4] SCREW (M8X1.25X30-MM)  
40. 116-3877 N [3] SCREW  
41. 116-1336 [1] BEARING AS-NEEDLE  
42. 116-1322 [1] GASKET-CONTROL  
43. 116-1332 [1] LINKAGE-CONTROL  
44. 116-1333 [1] SCREW-MOUNTING  
45. 116-1331 [1] LINK-FEEDBACK  
46. 116-1330 [1] LINK  
47. 077-8353 [2] PIN (SPRING)  
48. 7X-9232 [2] PLUG-VENT  
49. 9F-2247 [3] PLUG-PIPE  
58. 231-4318 [1] GASKET  
59. 116-3879 [7] SCREW (M8X1.25X30-MM)  
60. 164-6665 [1] SCREW  
61. 116-3871 [1] NUT-SEAL  
63. 175-2544 J [1] SPRING  
64. 3K-0360 [1] SEAL-O-RING  
65. 174-6117 [1] PLUG  
68. 149-0589 [1] PISTON  
69. 9S-8004 [1] PLUG (9/16-18-THD)  
71. 1J-9671 [1] SEAL-O-RING  
73. 1G-7386 [1] POPPET  
    -OR-
  6R-1703 [1] POPPET  
74. 116-2009 [1] SPRING  
    -OR-
  1G-5730 [1] SPRING  
75. 110-6323 [1] KIT-RELIEF SHIM (PROPEL MOTOR)  
76. 116-2010 [1] PLUG-RELIEF  
77. 116-3874 [2] BEARING AS-NEEDLE  
78. 116-1337 [1] BEARING  
    (INCLUDES BEARING AS-NEEDLE)
79. 116-3881 [10] SCREW (M6X1X20-MM)  
    -OR-
  165-5560 [10] SCREW (M6X1X30-MM)  
80. 177-0992 [1] GASKET (SVO COVER)  
81. 177-0993 [2] GASKET (SIDE)  
85. 175-2545 [1] ADAPTER-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  116-2008 H [1] KIT-SERVO PISTON (VIBRATORY PISTON PUMP)  
  116-1449 L [1] KIT-CYLINDER (PISTON PUMP)  
  116-1328 N [1] KIT-CONTROL VALVE (PISTON PUMP)  
  116-2005 P [2] KIT-VALVE PLUG (PISTON PUMP)  
  169-4849 J [1] SPOOL (PISTON PUMP)  
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   KIT MARKED P SERVICES PART(S) MARKED P
  T   KIT MARKED T SERVICES PART(S) MARKED T
 

#KEBP01840337
 

9T-8248: ROTATING GP-PUMP

9T-8248 ROTATING GP-PUMP
S/N 5FK104-UP; 1RM60-UP
PART OF 109-1666 PUMP GP-PISTON
i00170977 KEBP0184
9T8248 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8249 [1] KIT-PISTON  
2. 9T-3860 [1] PLATE  
3. 9T-3859 [1] WASHER (1.068X1.139X0.099-MM THK)  
4. 9T-3862 [1] RETAINER  
5. 9T-3857 [3] PIN  
6. 9T-8250 [1] BARREL  
7. 9T-3861 [1] WASHER (1.062X1.58X0.095-MM THK)  
8. 9T-3858 [1] SPRING  
9. 9T-3864 [1] WASHER (1.2X1.58X0.095-MM THK)  
10. 004-1683 [1] RING-SNAP  
 

#KEBP01840338
 

132-0973: TANK & MTG GP-HYDRAULIC

132-0973 TANK & MTG GP-HYDRAULIC
S/N 5FK104-UP; 1RM60-UP
PART OF 107-1145 HYDRAULIC AR-AUXILIARY
i00511905 KEBP0184
1320973 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-5149 [1] TANK AS (HYDRAULIC OIL)  
2. 098-4240 Y [1] FILTER GP-OIL (OIL RETURN)  
3. 081-7420 Y [1] FILTER GP-OIL (OIL SUCTION)  
4. 9B-7237 [10] BOLT (3/8-16X1.25-IN)  
5. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 077-5200 Y [1] GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)  
7. 2S-4078 [2] SEAL-O-RING  
8. 9H-6454 [1] GASKET  
9. 7H-1447 [1] CAP-FILLER (HYDRAULIC OIL)  
10. 8T-2275 [1] BALL  
11. 2D-4202 [1] PLATE  
12. 6H-9361 [1] RING-RETAINING  
13. 5D-7927 [1] STRAINER AS-OIL (HYDRAULIC OIL)  
14. 9M-7394 [1] LEVER  
15. 1L-5072 [1] DOWEL  
16. 5D-1911 [1] COVER-HYDRAULIC CAP  
17. 2J-7761 [1] RING-RETAINING  
18. 191-5439 [1] VALVE-BREAKER RELIEF  
19. 3D-2824 [3] SEAL-O-RING  
20. 1U-2827 [1] GUIDE-VALVE  
21. 7B-3039 [1] SPRING  
22. 8J-8783 [1] VALVE-DRAIN  
23. 8T-3298 [1] SEAL-RECTANGULAR  
24. 5M-2057 [1] SEAL-O-RING  
25. 9J-7031 [1] PLUG-DRAIN (HYDRAULIC OIL TANK)  
26. 8J-8782 [1] BODY-DRAIN VALVE  
27. 9S-6130 [1] PLUG  
28. 8D-0983 [4] MOUNTING AS-VIBRATION ISOLATOR  
29. 7X-0312 [4] BOLT (7/16-14X2.5-IN)  
30. 7X-0447 [4] NUT (7/16-14-THD)  
31. 1C-1976 [4] WASHER (0.438X1.5X0.075-IN THK)  
32. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
33. 8R-0126 [4] WASHER (12.2X50X3-MM THK)  
34. 3E-8700 Y [1] SENSOR GP-TEMPERATURE (HYDRAULIC OIL)  
35. 3J-1907 [1] SEAL-O-RING  
36. 9S-4183 [1] PLUG (1-1/16-12-THD)  
37. 1G-7663 [1] STRAINER AS (HYDRAULIC OIL)  
38. 030-4606 [1] SEAL-O-RING  
39. 109-3657 [1] CONNECTOR  
40. 6K-6307 [2] SEAL-O-RING  
41. 6V-8400 [2] SEAL-O-RING  
42. 8V-7764 [1] ADAPTER-O-RING  
43. 7M-8485 [1] SEAL-O-RING  
44. 6V-8635 [1] CONNECTOR  
45. 5K-9090 [1] SEAL-O-RING  
46. 6V-9009 [1] ELBOW  
47. 6V-9007 [1] ELBOW  
48. 6V-9746 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01840339
 

121-7035: VALVE GP-CONTROL

121-7035 VALVE GP-CONTROL
S/N 5FK104-UP; 1RM60-UP
PART OF 132-0974 PUMP & LINES GP-HYDRAULIC
i00486259 KEBP0184
1217035 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-9836 [1] VALVE-DIRECTIONAL  
2. 107-0809 [3] KIT-BOLT  
3. 121-7037 [1] VALVE-PRESSURE SEQUENCE  
4. 109-9835 [1] VALVE-SOLENOID  
5. 107-0818 [3] COIL  
6. 7X-9178 [3] PLATE-IDENTIFICATION  
7. 2U-6509 [3] NUT-SOLENOID (1/2-18-THD)  
8. 1G-9922 [2] VALVE GP-SOLENOID  
    (EACH INCLUDES)
  1G-4380 [1] KIT-SEAL  
9. 9S-8004 [4] PLUG (9/16-18-THD)  
10. 3J-1907 [4] SEAL-O-RING  
11. 109-9837 [1] PISTON-PILOT  
12. 109-9833 [2] VALVE-CHECK  
13. 109-9834 [1] VALVE-RELIEF  
14. 121-7036 [1] VALVE-PRESSURE SEQUENCE  
15. 9S-8003 [2] PLUG (1/2-20-THD)  
16. 1J-9671 [2] SEAL-O-RING  
17. 9S-8006 [1] PLUG (7/8-14-THD)  
18. 2M-9780 [1] SEAL-O-RING  
19. 9S-8002 [1] PLUG (7/16-20-THD)  
20. 3J-7354 [1] SEAL-O-RING  
21. 109-9838 [1] VALVE-RELIEF  
22. 214-5309 [2] VALVE GP-SOLENOID  
    (EACH INCLUDES)
  155-1280 [2] COIL  
  155-4016 [1] KIT-SEAL  
  183-8608 [2] NUT-RETAINING  
23. 128-5098 [2] PLUG-ORIFICE  
 

Information:

Special Instruction
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Implement Pump
RM-350 RECLAIMER MIXER AND SM-350 STABILIZER MIXER MACHINE S
Transmission
RM-350 RECLAIMER MIXER AND SM-350 STABILIZER MIXER MACHINE S
Piston Pump (Water Spray)
Water Spray System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Piston Pump (Water Spray)
Water Spray System
Reuse And Salvage Guidelines
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{3108, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
Disassembly and Assembly
Pump Assembly
3406 ENGINE SUPPLEMENT FOR RM-350 RECLAIMER MIXER AND SM-350
Auxiliary Pump
RM-350 RECLAIMER MIXER & SM-350 STABILIZER MIXER MACHINE SYS
Emulsion Hydraulic Pump
RM-350 RECLAIMER MIXER & SM-350 STABILIZER MIXER MACHINE SYS
Scavenger Pump
RM-350 RECLAIMER MIXER & SM-350 STABILIZER MIXER MACHINE SYS
Service Magazine
Tooling Plates Simplify Swashplate Neutral Adjustment On Sauer Sunstrand Hydraulic Pumps; 4C-8498 Plate (42 CC Pumps - Drum Propel), 4C-9419 Plate (55 CC Pumps - Axle Propel), 127-5653 Plate, Neutral (75 CC Pumps), 127-5654 Plate, Neutral (100 CC Pumps){3203,5070,0767}
1996/12/09
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog SM-350 :

MOTOR GP-PISTON
6R-2496 MOTOR GP-PISTON
MOTOR GP-PISTON
6R-2496 MOTOR GP-PISTON
MOTOR GP-PISTON
123-8957 MOTOR GP-PISTON
MOTOR GP-PISTON
101-8286 MOTOR GP-PISTON
MOTOR GP-GEROTOR
098-0302 MOTOR GP-GEROTOR
312-2180 MOTOR GP-GEAR
MOTOR GP-GEAR
118-0410 MOTOR GP-GEAR
LINES GP-TILT CYLINDER
132-0964 LINES GP-TILT CYLINDER
PUMP GP-GEAR
110-2399 PUMP GP-GEAR
PUMP GP-GEAR
135-2689 PUMP GP-GEAR
PUMP GP-GEAR
135-2689 PUMP GP-GEAR
PUMP GP-PISTON
109-0900 PUMP GP-PISTON
PUMP GP-PISTON
109-1666 PUMP GP-PISTON
PUMP GP-PISTON
110-8045 PUMP GP-PISTON
ROTATING GP-PUMP
9T-8248 ROTATING GP-PUMP
TANK & MTG GP-HYDRAULIC
132-0973 TANK & MTG GP-HYDRAULIC

Truck sale:

CATERPILLAR SM-350 1995
 
CATERPILLAR SM-350 1995
- STABILIZERS / RECLAIMERS
MANTRAC NIGERIA LTD
Nigeria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.