AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

106-7671 CASE GP-CHAIN DRIVE S/N 5FK104-UP; 1RM60-UP PART OF 107-1135 ROTOR DRIVE AR SM-350 STABILIZER MIXER


IMPLEMENTS
CASE GP-CHAIN DRIVE
TRANSMISSION GP
CASE GP-CHAIN DRIVE
CHAMBER GP
TRANSMISSION GP
COUPLING GP

STABILIZER MIXER SM-350 STABILIZER MIXER 1RM
 RM-350 SM-350 Reclaimer, Stabilizer Mixer 1RM00060-UP (MACHINE) POWERED BY 3406C Engine KEBP0184 SM-350 1RM   (1993)

IMPLEMENTS

CASE GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
120-9912 CASE & COVER GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
120-9915 CASE & COVER GP-CHAIN DRIVE
CASE GP-CHAIN DRIVE
106-7671 CASE GP-CHAIN DRIVE
CASE GP-CHAIN DRIVE
120-9918 CASE GP-CHAIN DRIVE
CHAIN GP-DRIVE
138-4424 CHAIN GP-DRIVE
DRIVE GP-CHAIN
107-1138 DRIVE GP-CHAIN
DRIVE GP-CHAIN
107-1138 DRIVE GP-CHAIN
IDLER GP-CHAIN DRIVE
120-9910 IDLER GP-CHAIN DRIVE
LATCH GP-ROTOR
107-1137 LATCH GP-ROTOR
SHAFT GP-ROTOR STUB
109-6643 SHAFT GP-ROTOR STUB
 

#KEBP01840350
 

106-7671: CASE GP-CHAIN DRIVE

106-7671 CASE GP-CHAIN DRIVE
S/N 5FK104-UP; 1RM60-UP
PART OF 107-1135 ROTOR DRIVE AR
i00490906 KEBP0184
1067671 CASE GP-CHAIN DRIVE Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-9909 C [1] BAR AS  
2. 7X-0368 [16] BOLT (3/4-10X3-IN)  
3. 7X-0521 [16] WASHER-HARD (20X36.5X5-MM THK)  
4. 120-9912 YC [1] CASE & COVER GP-CHAIN DRIVE  
5. 120-9915 YC [1] CASE & COVER GP-CHAIN DRIVE  
6. 120-9918 YC [2] CASE GP-CHAIN DRIVE  
7. 109-6643 Y [2] SHAFT GP-ROTOR STUB  
8. 120-9910 YC [2] IDLER GP-CHAIN DRIVE  
9. 107-1138 Y [2] DRIVE GP-CHAIN  
10. 107-1137 Y [1] LATCH GP-ROTOR  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01840351
 

120-9918: CASE GP-CHAIN DRIVE

120-9918 CASE GP-CHAIN DRIVE
S/N 5FK104-UP; 1RM60-UP
PART OF 106-7671 CASE GP-CHAIN DRIVE
i00478509 KEBP0184
1209918 CASE GP-CHAIN DRIVE Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-5008 [3] ELBOW-PIPE  
2. 120-9919 [1] TANK-OIL  
3. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
5. 6G-0078 [1] BREATHER  
6. 077-8196 [4] CONNECTOR  
7. 5P-1465 E HOSE (22CM)  
8. 3B-6552 [1] ELBOW-PIPE  
9. 3B-7736 [2] FITTING  
10. 5P-1465 E HOSE (9.5CM)  
11. 3B-6487 [2] COUPLING (PIPE)  
  E   ORDER BY THE CENTIMETER
 

#KEBP01840352
 

8E-1414: CASE GP-ROTOR TRANSMISSION

8E-1414 CASE GP-ROTOR TRANSMISSION
S/N 1XX104-UP
PART OF 8E-4238 TRANSMISSION AR-ROTOR
i00412017 KEBP0184
8E1414 CASE GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9H-0846 [1] SEAL-O-RING  
2. 9G-5127 [1] BREATHER (ATMOSPHERIC)(PLANETARY CASE)  
3. 1P-3262 [1] COVER  
4. 307-2670 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  238-5080 [1] SEAL-O-RING  
5. 8E-2390 [1] VALVE GP-RELIEF (PLANETARY CASE)  
6. 9X-4609 [1] SEAL-O-RING  
7. 6V-6228 [2] SEAL-O-RING  
8. 9W-7189 Y [1] VALVE GP-FLOW CONTROL (PLANETARY CASE)  
9. 3M-7045 [1] PLUG (3/4-14 NPT-THD)  
10. 8E-1776 Y [1] CASE GP-ROTOR TRANSMISSION  
11. 8S-9130 [1] SCREEN-SUCTION (PLANETARY CASE)  
12. 8S-9129 [1] FILTER-MAGNETIC (PLANETARY CASE)  
13. 0S-1594 [4] BOLT (3/8-16X1-IN)  
14. 2H-6338 [1] SEAL-O-RING  
15. 326-0316 [1] PLUG AS  
  9S-6130 [1] PLUG  
  228-7096 [1] SEAL-O-RING  
16. 329-5453 [1] ADAPTER AS  
  4S-6679 [1] ADAPTER  
  228-7096 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01840353
 

8E-1776: CASE GP-ROTOR TRANSMISSION

8E-1776 CASE GP-ROTOR TRANSMISSION
S/N 1XX104-UP
PART OF 8E-1414 CASE GP-ROTOR TRANSMISSION
i02438397 KEBP0184
8E1776 CASE GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-7432 [1] RING  
2. 5H-5672 [2] SEAL-O-RING  
3. 6D-7013 [2] COVER  
4. 7X-0345 [8] BOLT (5/8-11X1.75-IN)  
5. 8E-1777 [1] SLEEVE  
 

#KEBP01840354
 

138-4424: CHAIN GP-DRIVE

138-4424 CHAIN GP-DRIVE
S/N 5FK120-UP; 1RM80-UP
PART OF 107-1138 DRIVE GP-CHAIN
i01175296 KEBP0184
1384424 CHAIN GP-DRIVE Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-6916 [1] LINK-MASTER  
2. 138-6917 [1] LINK-OFFSET  
 

#KEBP01840355
 

105-9204: CHAMBER GP-MIXING

105-9204 CHAMBER GP-MIXING
S/N 5FK104-108; 1RM60-78
ROTOR HOUSING
PART OF 132-0958, 132-0960 CHASSIS AR
i00485166 KEBP0184
1059204 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
2. 8T-4896 C [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 120-9166 [1] ANGLE  
4. 105-9736 [1] DOOR AS-FRONT  
5. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
6. 7X-0443 [4] BOLT (1-8X5.5-IN)  
7. 6K-3632 [6] LOCKNUT (1-8-THD)  
8. 7X-0404 [2] BOLT (1-8X2.5-IN)  
9. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
10. 1G-6646 [2] ANGLE  
11. 1G-6643 [1] ANGLE  
12. 1G-6642 [2] PLATE  
13. 4F-3646 [22] BOLT (1/2-13X1.5-IN)  
14. 8T-4223 [48] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 1K-6872 [57] LOCKNUT (1/2-13-THD)  
16. 123-4605 C [1] CHAMBER AS  
17. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
18. 6R-2360 [4] PIN  
19. 4L-6454 [12] BOLT (3/8-16X1-IN)  
20. 2K-4973 [7] LOCKNUT (3/8-16-THD)  
21. 077-7730 [1] BLADE  
22. 122-8015 C [1] DOOR AS  
23. 034-9458 [2] EYEBOLT  
24. 1G-6053 C [1] TUBE  
25. 1B-2578 [2] NUT (3/8-16-THD)  
26. 1G-6052 [1] LEVER AS  
27. 1G-6644 [1] ANGLE  
28. 1G-7861 [2] HOUSING-DISC  
29. 137-7604 [2] DISC  
30. 121-0154 C [2] PIVOT  
31. 8T-9398 [4] BOLT (3/4-10X1.75-IN)  
32. 8T-9380 [18] BOLT (7/16-14X1-IN)  
33. 8T-5360 [18] WASHER (12X22.5X2.5-MM THK)  
34. 121-0158 C [2] BEARING  
35. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 1K-8061 [4] WASHER-THRUST (4.03X5.72X0.265-IN THK)  
38. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
39. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
40. 1D-4688 [22] BOLT (1/2-13X1.5-IN)  
41. 4L-6459 [4] BOLT (3/8-16X2.5-IN)  
42. 7R-3962 [1] CHAIN  
43. 114-4367 [2] PLATE  
44. 123-4609 [2] PLATE  
45. 7X-0368 [1] BOLT (3/4-10X3-IN)  
46. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
47. 1D-4687 [4] BOLT-CARRIAGE  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01840356
 

105-9204: CHAMBER GP-MIXING

105-9204 CHAMBER GP-MIXING
S/N 5FK109-117; 1RM79-79
ROTOR HOUSING
PART OF 132-0958, 132-0960 CHASSIS AR
i01175784 KEBP0184
1059204 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
2. 8T-4896 [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 120-9166 [1] ANGLE  
4. 105-9736 [1] DOOR AS-FRONT  
5. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
6. 7X-0443 [4] BOLT (1-8X5.5-IN)  
7. 6K-3632 [6] LOCKNUT (1-8-THD)  
8. 7X-0404 [2] BOLT (1-8X2.5-IN)  
9. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
10. 1G-6646 [2] ANGLE  
11. 1G-6643 [1] ANGLE  
12. 1G-6642 [2] PLATE  
13. 4F-3646 [22] BOLT (1/2-13X1.5-IN)  
14. 8T-4223 [48] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 1K-6872 [57] LOCKNUT (1/2-13-THD)  
16. 123-4605 [1] CHAMBER AS  
17. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
18. 6R-2360 [4] PIN  
19. 4L-6454 [12] BOLT (3/8-16X1-IN)  
20. 2K-4973 [7] LOCKNUT (3/8-16-THD)  
21. 077-7730 [1] BLADE  
22. 122-8015 [1] DOOR AS  
23. 034-9458 [2] EYEBOLT  
24. 1G-6053 [1] TUBE  
25. 1B-2578 [2] NUT (3/8-16-THD)  
26. 1G-6052 [1] LEVER AS  
27. 1G-6644 [1] ANGLE  
28. 1G-7861 [2] HOUSING-DISC  
29. 139-2792 C [2] DISC AS  
30. 121-0154 [2] PIVOT  
31. 8T-9398 [4] BOLT (3/4-10X1.75-IN)  
32. 8T-9380 [18] BOLT (7/16-14X1-IN)  
33. 8T-5360 [18] WASHER (12X22.5X2.5-MM THK)  
34. 121-0158 [2] BEARING  
35. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 1K-8061 [4] WASHER-THRUST (4.03X5.72X0.265-IN THK)  
38. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
39. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
40. 1D-4688 [22] BOLT (1/2-13X1.5-IN)  
41. 4L-6459 [4] BOLT (3/8-16X2.5-IN)  
42. 7R-3962 [1] CHAIN  
43. 114-4367 [2] PLATE  
44. 123-4609 [2] PLATE  
45. 7X-0368 [1] BOLT (3/4-10X3-IN)  
46. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
47. 1D-4687 [4] BOLT-CARRIAGE  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01840357
 

105-9204: CHAMBER GP-MIXING

105-9204 CHAMBER GP-MIXING
S/N 5FK118-UP; 1RM80-UP
ROTOR HOUSING
PART OF 132-0958, 132-0960 CHASSIS AR
i01175785 KEBP0184
1059204 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
2. 8T-4896 [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 120-9166 [1] ANGLE  
4. 105-9736 [1] DOOR AS-FRONT  
5. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
6. 7X-0443 [4] BOLT (1-8X5.5-IN)  
7. 6K-3632 [6] LOCKNUT (1-8-THD)  
8. 7X-0404 [2] BOLT (1-8X2.5-IN)  
9. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
10. 1G-6646 [2] ANGLE  
11. 1G-6643 [1] ANGLE  
12. 1G-6642 [2] PLATE  
13. 4F-3646 [22] BOLT (1/2-13X1.5-IN)  
14. 8T-4223 [48] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 1K-6872 [57] LOCKNUT (1/2-13-THD)  
16. 123-4605 [1] CHAMBER AS  
17. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
18. 6R-2360 [4] PIN  
19. 4L-6454 [12] BOLT (3/8-16X1-IN)  
20. 2K-4973 [7] LOCKNUT (3/8-16-THD)  
21. 077-7730 [1] BLADE  
22. 122-8015 [1] DOOR AS  
23. 034-9458 [2] EYEBOLT  
24. 1G-6053 [1] TUBE  
25. 1B-2578 [2] NUT (3/8-16-THD)  
26. 1G-6052 [1] LEVER AS  
27. 1G-6644 [1] ANGLE  
28. 1G-7861 [2] HOUSING-DISC  
29. 137-7604 C [2] DISC  
30. 121-0154 [2] PIVOT  
31. 8T-9398 [4] BOLT (3/4-10X1.75-IN)  
32. 8T-9380 [18] BOLT (7/16-14X1-IN)  
33. 8T-5360 [18] WASHER (12X22.5X2.5-MM THK)  
34. 121-0158 [2] BEARING  
35. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
37. 1K-8061 [4] WASHER-THRUST (4.03X5.72X0.265-IN THK)  
38. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
39. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
40. 1D-4688 [22] BOLT (1/2-13X1.5-IN)  
41. 4L-6459 [4] BOLT (3/8-16X2.5-IN)  
42. 7R-3962 [1] CHAIN  
43. 114-4367 [2] PLATE  
44. 123-4609 [2] PLATE  
45. 7X-0368 [1] BOLT (3/4-10X3-IN)  
46. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
47. 1D-4687 [4] BOLT-CARRIAGE  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01840358
 

8E-4240: CONTROL GP-TRANSMISSION HYD

8E-4240 CONTROL GP-TRANSMISSION HYD
S/N 1XX1-UP
PART OF 8E-4238 TRANSMISSION AR-ROTOR
i00413662 KEBP0184
8E4240 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4241 Y [1] VALVE GP-TRANSMISSION CONTROL  
2. 9P-9150 [34] WASHER (8.25X18X0.84-MM THK)  
3. 1T-0738 [17] WASHER (8.4X19X1.83-MM THK)  
4. 9G-9150 [2] CLIP  
5. 0T-0102 [2] BOLT (3/8-16X0.625-IN)  
6. 1F-4111 [9] BOLT (5/16-18X3.5-IN)  
7. 4B-3903 [8] BOLT (5/16-18X4-IN)  
8. 8C-5175 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01840359
 

120-7631: COUPLING GP-TORQUE LIMITING

120-7631 COUPLING GP-TORQUE LIMITING
S/N 5FK104-UP; 1RM60-UP
PART OF 6R-2486 SHAFT & MTG GP-ROTOR DRIVE
i00476168 KEBP0184
1207631 COUPLING GP-TORQUE LIMITING Parts scheme
  For full view, you need register

Parts for your SM-350 STABILIZER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1844 [12] LOCKNUT  
2. 120-9491 [4] BOLT-SPRING  
3. 115-5238 [8] BOLT-SPECIAL  
4. 120-9490 [6] WASHER  
5. 120-9489 [6] BOLT  
6. 120-9488 [6] PIN-DOWEL  
   
    AVAILABLE REPAIR KIT(S):
  120-9487 [1] KIT-REPAIR  
 

Information:

Service Letter-NACD
Product Support Program For Replacing Rotor Drive Stub Shafts On Certain RM-350 Reclaimer Mixers And SM-350 Stabilizer Mixers
Product Support Program For Replacing Rotor Drive Stub Shafts On Certain RM-350 Reclaimer Mixers And SM-350 Stabilizer Mixers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Stub Shaft Assembly
RM-350 RECLAIMER MIXER AND SM-350 STABILIZER MIXER MACHINE S
Service Letter-China
Product Support Program For Replacing Rotor Drive Stub Shafts On Certain RM-350 Reclaimer Mixers And SM-350 Stabilizer Mixers
Product Support Program For Replacing Rotor Drive Stub Shafts On Certain RM-350 Reclaimer Mixers And SM-350 Stabilizer Mixers
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Implements
RM-350 RECLAIMER MIXER & SM-350 STABILIZER MIXER MACHINE SYS
Service Magazine
Retention Between Rotor Drive Axle Sprocket And Retaining Plate Improved {5631}
1997/09/01
Update Is Available For The RM/SM350 Rotor Drive Chain Idler Wheels {5634}
1998/08/24
Update Is Available For The RM/SM350 Rotor Drive Chain Idler Wheels{5634}
1998/10/26

Caterpillar Parts SIS Catalog SM-350 :

CASE & COVER GP-CHAIN DRIVE
120-9915 CASE & COVER GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
120-9912 CASE & COVER GP-CHAIN DRIVE
BIT AS-CUTTER
292-5103 BIT AS-CUTTER
BAR GP-BREAKER
112-2388 BAR GP-BREAKER
BAR GP-BREAKER
112-2388 BAR GP-BREAKER
VALVE GP-SOLENOID & RELIEF
132-0970 VALVE GP-SOLENOID & RELIEF
VALVE GP-SOLENOID & RELIEF
132-0969 VALVE GP-SOLENOID & RELIEF
VALVE GP-PUMP CONTROL
255-4865 VALVE GP-PUMP CONTROL
CASE GP-CHAIN DRIVE
120-9918 CASE GP-CHAIN DRIVE
CASE GP-ROTOR TRANSMISSION
8E-1414 CASE GP-ROTOR TRANSMISSION
CASE GP-ROTOR TRANSMISSION
8E-1776 CASE GP-ROTOR TRANSMISSION
CHAIN GP-DRIVE
138-4424 CHAIN GP-DRIVE
CHAMBER GP-MIXING
105-9204 CHAMBER GP-MIXING
CHAMBER GP-MIXING
105-9204 CHAMBER GP-MIXING
CHAMBER GP-MIXING
105-9204 CHAMBER GP-MIXING
CONTROL GP-TRANSMISSION HYD
8E-4240 CONTROL GP-TRANSMISSION HYD

Truck sale:

CATERPILLAR SM-350 1995
 
CATERPILLAR SM-350 1995
- STABILIZERS / RECLAIMERS
MANTRAC NIGERIA LTD
Nigeria
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.