POWER TRAIN
AXLE GPPOWER TRAIN
AXLE GP#KEBP01850190
183-2039: AXLE GP-DRIVE
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3B-8490 | [2] | FITTING-GREASE (1/8-27 PTF) | |
2. | 5V-9155 | [4] | CLAMP-HOSE | |
3. | 0S-1629 | [2] | BOLT (1/2-20X1-IN) | |
4. | 6U-1989 | [2] | VALVE-RELIEF (DIFFERENTIAL) | |
5. | 7C-2465 | [2] | BRACKET | |
6. | 8C-6865 | [2] | ADAPTER | |
7. | 8C-6866 | [2] | CONNECTOR | |
8. | 9G-5127 | [2] | BREATHER AS (POWER TRAIN OIL) | |
9. | 9U-6992 C | [2] | CONNECTOR AS | |
10. | 077-2967 B | [4] | SHIM (0.08-M THK) | |
11. | 077-3005 B | [4] | SHIM (3.5-MM THK) | |
12. | 122-3629 | [2] | FASTENER GP | |
(EACH INCLUDES) | ||||
8V-4102 | [2] | STRAP | ||
8V-4107 | [4] | BOLT-SELF-LOCKING (1/4-28X0.62-IN) | ||
13. | 122-3631 | [2] | YOKE | |
14. | 122-8064 | [4] | PIN AS | |
15. | 150-8759 I | [2] | HOSE AS | |
16. | 160-1099 | [2] | FITTING (NYLON) | |
17. | 180-7328 | [2] | ADAPTER | |
18. | 185-6315 CY | [2] | DIFFERENTIAL GP | |
19. | 4J-5477 | [4] | SEAL-O-RING | |
20. | 4S-1962 | [2] | CLIP (LOOP) | |
21. | 8T-4821 | [2] | WASHER (13.5X40X3-MM THK) | |
22. | 7X-4743 | [1] | GROMMET | |
23. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
24. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
25. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
26. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
27. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
28. | 8T-5387 | [1] | GROMMET | |
29. | 136-1955 CE | HOSE (74-CM) | ||
29A. | 136-1955 CE | HOSE (80-CM) | ||
30. | 7K-1181 | [4] | STRAP-CABLE | |
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
E | ORDER BY THE CENTIMETER | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#KEBP01850191
213-4812: AXLE GP-DRIVE
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 077-2967 B | [4] | SHIM (0.08-M THK) | |
2. | 077-3005 B | [4] | SHIM (3.5-MM THK) | |
3. | 122-3629 | [2] | FASTENER GP | |
(EACH INCLUDES) | ||||
8V-4102 | [2] | STRAP | ||
8V-4107 | [4] | BOLT-SELF-LOCKING (1/4-28X0.62-IN) | ||
4. | 122-3631 | [2] | YOKE | |
5. | 122-8064 | [4] | PIN AS | |
6. | 212-2776 Y | [1] | DIFFERENTIAL GP (RH) | |
7. | 212-2777 Y | [1] | DIFFERENTIAL GP (LH) | |
8. | 213-5244 | [2] | SEAL | |
9. | 0S-1629 | [2] | BOLT (1/2-20X1-IN) | |
10. | 148-8318 | [4] | CONNECTOR AS | |
(EACH INCLUDES) | ||||
3K-0360 | [1] | SEAL-O-RING | ||
6V-8397 | [1] | SEAL-O-RING | ||
6V-8634 | [1] | CONNECTOR | ||
11. | 148-8433 | [2] | TEE AS | |
(EACH INCLUDES) | ||||
6V-8397 | [2] | SEAL-O-RING | ||
6V-9836 | [1] | TEE-SWIVEL | ||
12. | 171-6727 | [2] | ADAPTER AS | |
(EACH INCLUDES) | ||||
4J-5477 | [1] | SEAL-O-RING | ||
8T-4128 | [1] | ADAPTER | ||
13. | 5K-5068 | [2] | FITTING-PIPE (1/8-27 PTF) | |
14. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
15. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
16. | 8T-4821 | [2] | WASHER (13.5X40X3-MM THK) | |
B | USE AS REQUIRED | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#KEBP01850192
121-5912: AXLE GP-FRONT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2P-8119 | [10] | CONE-BEARING | |
2. | 3B-8489 | [5] | FITTING-GREASE (1/8-27 PTF) | |
3. | 002-1212 | [10] | CUP-BEARING | |
4. | 122-2077 Y | [2] | AXLE GP-FRONT | |
5. | 122-2078 Y | [1] | AXLE GP-FRONT | |
6. | 122-4184 | [5] | HUB | |
7. | 053-1720 | [5] | PIN-SPRING | |
8. | 6V-7744 M | [3] | LOCKNUT (M10X1.5-THD) | |
9. | 077-2872 | [5] | RING-SEAL | |
10. | 077-3126 | [5] | WASHER | |
11. | 077-3228 | [5] | GASKET | |
12. | 077-3266 | [5] | NUT | |
13. | 077-3279 | [5] | CAP | |
14. | 077-4215 | [3] | PIN-PIVOT | |
15. | 7X-0440 | [15] | BOLT (5/16-18X1.75-IN) | |
16. | 8T-4224 | [15] | WASHER-HARD (8.8X16X2-MM THK) | |
17. | 8T-6466 M | [3] | BOLT (M10X1.5X60-MM) | |
18. | 208-7569 | [5] | SHIM | |
19. | 201-5216 | [5] | SEAL-V-RING | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#KEBP01850193
122-2077: AXLE GP-FRONT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SIS#KEBP01850194
122-2078: AXLE GP-FRONT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SIS#KEBP01850195
144-9856: AXLE GP-FRONT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SIS#KEBP01850196
203-2733: AXLE GP-FRONT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2P-8119 | [10] | CONE-BEARING | |
2. | 3B-8489 | [5] | FITTING-GREASE (1/8-27 PTF) | |
3. | 002-1212 | [10] | CUP-BEARING | |
4. | 077-2872 | [5] | RING-SEAL | |
5. | 077-3126 | [5] | WASHER | |
6. | 077-3228 | [5] | GASKET | |
7. | 077-3266 | [5] | NUT | |
8. | 077-3279 | [5] | CAP | |
9. | 122-4184 | [5] | HUB | |
10. | 203-0230 | [3] | PIN AS | |
11. | 203-3829 Y | [2] | AXLE GP-FRONT (2-WHEEL) | |
12. | 203-3830 Y | [1] | AXLE GP-FRONT (1-WHEEL) | |
13. | 053-1720 | [5] | PIN-SPRING | |
14. | 208-7569 | [5] | SHIM | |
15. | 201-5216 | [5] | SEAL-V-RING | |
16. | 7X-0440 | [15] | BOLT (5/16-18X1.75-IN) | |
17. | 7X-7729 | [3] | WASHER (11X25X3-MM THK) | |
18. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
19. | 8T-4224 | [15] | WASHER-HARD (8.8X16X2-MM THK) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#KEBP01850197
203-3829: AXLE GP-FRONT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SIS#KEBP01850198
203-3830: AXLE GP-FRONT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SIS#KEBP01850199
209-5792: AXLE GP-FRONT
209-5792 AXLE GP-FRONT -1-WHEEL
S/N 3XR1-UP
PART OF 144-9857, 263-8610 INFLATION GP-AIR
AN ATTACHMENT
S/N 3XR1-UP
PART OF 144-9857, 263-8610 INFLATION GP-AIR
AN ATTACHMENT
Parts for your PS-150B PNEUMATIC COMPACTOR:
CATERPILLAR SISInformation:
POWER TRAIN
AXLE GP
Operation and Maintenance Manual
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Bearings for the Axle Hubs in Pneumatic Compactors{3282}
Installation of Bearings for the Axle Hubs in Pneumatic Compactors{3282}
Installation of Bearings for the Axle Hubs in Pneumatic Compactors{3282}
Service Letter-NACD
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Service Letter-Australia
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Service Letter-CFEL
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Service Letter-CSARL
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Service Letter-Americas
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Technical Information Bulletin
Proper Placement Of Hydraulic Jacks When Raising The Rear End Of Pneumatic Compactors
Proper Placement Of Hydraulic Jacks When Raising The Rear End Of Pneumatic Compactors
Proper Placement Of Hydraulic Jacks When Raising The Rear End Of Pneumatic Compactors
Specifications
Service Letter-China
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Service Letter-Asia
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Drive Shaft Bolts Need To Be Tightened To The Correct Torque On Certain PF-290, PS-150B, PS-200B, And PS-360B Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Installing Remote Axle Breathers In Certain PS-150, PS-200B, PF-290B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Product Support Program For Replacing The Drive Axle Pivot Bearings On Certain PF-290, PS-150B, PS-200B, And PS-360B Pneumatic Compactors
Disassembly and Assembly
Assembly & Installation Of Conventional Duo-Cone Seals
PS-150B & PS-200B PNEUMATIC COMPACTORS MACHINE SYSTEMS
PS-150B & PS-200B PNEUMATIC COMPACTORS MACHINE SYSTEMS
Service Magazine
Caterpillar Parts SIS Catalog PS-150B :
Truck sale:
16.201
Caterpillar PS150B, gummiradwalzen, Bau-Und Bergbauausrüstung
- pneumatic tired compactors
TOROMONT CAT
- pneumatic tired compactors
TOROMONT CAT
18.024
Caterpillar PS-150B, Verdichter, Bau-Und Bergbauausrüstung
- Compactors
WILLIAM ADAMS PTY. LTD.
Australia
- Compactors
WILLIAM ADAMS PTY. LTD.
Australia