AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-0283 FITTING GP-FUEL LINES S/N 98Z20866-30399 PART OF 133-4245 ENGINE AR AP-1000B ASPHALT PAVER


FUEL SYSTEM
LINES GP-FUEL
GOVERNOR GP
LINES GP-FUEL
KIT-FUEL SYSTEM PARTS
LINES GP-FUEL

ASPHALT PAVER AP-1000B ASPHALT PAVER 7HN
 AP-1000B, BG-260C Asphalt Paver 7HN00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0190 AP-1000B 7HN   (1998)

FUEL SYSTEM

LINES GP-FUEL
9Y-0283 FITTING GP-FUEL LINES
JOINT AS-TUBE
8L-3471 JOINT AS-TUBE
LINES GP-FUEL
142-0334 LINES GP-FUEL
LINES GP-FUEL
142-0334 LINES GP-FUEL
LINES GP-FUEL
142-0334 LINES GP-FUEL
LINES GP-FUEL FILTER
149-1350 LINES GP-FUEL FILTER
 

#KEBP01900110
 

9Y-0283: FITTING GP-FUEL LINES

9Y-0283 FITTING GP-FUEL LINES
S/N 98Z20866-30399
PART OF 133-4245 ENGINE AR
i00436217 KEBP0190
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-4924 [2] ELBOW  
  3J-1907 [2] SEAL-O-RING  
 

#KEBP01900111
 

129-1213: GOVERNOR GP-UNIT INJECTOR

129-1213 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16051-UP
PART OF 133-4245, 159-5999 ENGINE AR
i00541732 KEBP0190
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  131-7899 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01900112
 

130-7323: GOVERNOR GP-UNIT INJECTOR

130-7323 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16051-UP
PART OF 131-7899 GOVERNOR GP-UNIT INJECTOR
i00195729 KEBP0190
1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
15A. Z [1] PIN  
15B. Z [2] SWIVEL  
16. 7W-5594 [1] SHAFT AS-PIVOT  
16A. Z [1] PIN  
17. 7E-3216 [1] BLOCK AS-BEARING  
17A. 6F-5933 [2] BEARING AS-NEEDLE  
18. 7E-3217 [1] LEVER AS  
18A. Z [1] SWIVEL  
19. 4P-8948 [1] SEAT AS-SPRING  
19A. Z [1] INSERT  
20. 7C-3776 [1] PISTON AS  
20A. 4N-6407 [1] SPOOL-DASHPOT  
20B. 4N-6406 [1] RING-SPACER  
20C. 4N-6404 [1] RING-RETAINING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7W-5591 [1] SEAT-GOVERNOR SPRING  
26. 7C-5883 B [7] SHIM (0.25-MM THK)  
27. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
28. 4P-4000 [1] SPRING-LEVER  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 130-7322 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 5C-8312 M [1] NUT (M4X0.7-THD)  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP01900113
 

131-7899: GOVERNOR GP-UNIT INJECTOR

131-7899 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16051-UP
PART OF 129-1213 GOVERNOR GP-UNIT INJECTOR
i00649949 KEBP0190
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  130-7323 Y [1] GOVERNOR GP-UNIT INJECTOR  
  131-7889 [1] CAM-TORQUE  
  4P-5745 [1] CONTROL AS-FUEL RATIO  
  7C-5989 [1] PLATE-GOVERNOR INFORMATION  
  4P-6493 [1] PLATE-INFORMATION (GOVERNOR)  
  4P-2467 [1] SPRING GP-GOVERNOR  
  7C-4466 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01900114
 

8L-3471: JOINT AS-TUBE

8L-3471 JOINT AS-TUBE
S/N 7HN1-UP; 8GN1-UP
PART OF 142-0334 LINES GP-FUEL
i00068671 KEBP0190
8L3471 JOINT AS-TUBE Parts scheme
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-7536 [2] SEAL  
 

#KEBP01900115
 

390-9331: KIT-INJECTOR

390-9331 KIT-INJECTOR
S/N 7HN1-UP; 8GN1-UP
SINGLE FUEL INJECTOR
FOR USE WITH @@@@@159-5999@@@@@
FIELD INSTALLATION
i05235910 KEBP0190
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-8718 [1] SEAL-O-RING  
  125-8274 [1] SEAL-O-RING  
 

#KEBP01900116
 

142-0334: LINES GP-FUEL

142-0334 LINES GP-FUEL
S/N 7HN1-265; 8GN1-560
PART OF 115-8327 ENGINE AR
i00648158 KEBP0190
1420334 LINES GP-FUEL Parts scheme 1420334 LINES GP-FUEL Parts scheme 1420334 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9801 [1] BASE-SEPARATOR  
2. 8N-9803 [1] FILTER-FUEL (WATER SEPARATOR)  
3. 8N-9802 [1] CLAMP  
4. 111-5166 [1] BRACKET  
5. 4L-6454 [2] BOLT (3/8-16X1-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 146-0187 [2] CONNECTOR  
9. 1J-9671 [5] SEAL-O-RING  
10. 6V-8397 [15] SEAL-O-RING  
11. 3K-8460 [2] PLUG (1/2-20-THD)  
12. 6V-2611 [1] VALVE (DRAIN)  
13. 6S-8620 [1] CLAMP-HOSE  
14. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
15. 6V-8627 [1] ELBOW  
16. 8M-2773 [2] CLIP (LOOP)  
17. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
18. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
19. 3K-0360 [10] SEAL-O-RING  
20. 5E-0114 [6] CLAMP  
21. 5E-2176 [2] CLAMP  
22. 130-3912 I [1] HOSE AS  
23. 7R-9920 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [1] NUT (10-32-THD)  
  9X-8862 [1] LOCKWASHER  
24. 8C-7974 [1] GASKET  
25. 8L-6521 [5] BOLT (10-32X0.5-IN)  
26. 4B-4274 [5] WASHER (5.5X13X1.2-MM THK)  
27. 149-5380 Y [1] PUMP GP-FUEL TRANSFER  
28. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
29. 149-5253 I [1] HOSE AS  
30. 139-5856 I [1] HOSE AS  
31. 130-3901 I [1] HOSE AS  
32. 119-0072 [1] FILTER GP-FUEL  
33. 5P-8998 [1] FITTING  
34. 6V-9836 [1] TEE-SWIVEL  
35. 8C-6868 [1] CONNECTOR  
36. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
37. 5P-4961 [1] CLAMP-HOSE  
38. 142-5942 I [1] HOSE AS  
39. 130-3911 I [1] HOSE AS  
40. 120-4210 [1] TANK AS-FUEL  
41. 9S-4185 [4] PLUG (3/4-16-THD)  
42. 6V-3342 [1] ELBOW-PIPE  
43. 2T-2305 [2] ELBOW  
44. 4J-5477 [1] SEAL-O-RING  
45. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
46. 108-2153 I [1] HOSE AS  
47. 3J-1907 [2] SEAL-O-RING  
48. 5P-1442 E HOSE (110CM)  
49. 095-0912 [1] CLIP  
50. 6V-8723 [3] ELBOW  
51. 6V-8634 [2] CONNECTOR  
52. 6V-8987 [1] ELBOW  
53. 6V-9168 [1] NUT (11/16-16-THD)  
54. 5E-8837 [1] ADAPTER  
55. 8T-9925 [1] BUSHING-TERMINAL (9/16-18 STR-THD)  
56. 5R-6306 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
57. 5R-6302 [1] CAP-DUST  
58. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
59. 123-6305 [1] CAP AS-FILLER  
60. 7X-0448 [4] NUT (5/8-11-THD)  
61. 7X-0345 [4] BOLT (5/8-11X1.75-IN)  
62. 5C-6266 [8] BOLT (5/8-11X1-IN)  
63. 8L-3471 Y [2] JOINT AS-TUBE  
64. 120-4209 [1] TANK AS-FUEL  
65. 8M-2770 [1] CLIP (LOOP)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01900117
 

142-0334: LINES GP-FUEL

142-0334 LINES GP-FUEL
S/N 7HN266-311; 8GN561-576
PART OF 115-8327 ENGINE AR
i01820245 KEBP0190
1420334 LINES GP-FUEL Parts scheme 1420334 LINES GP-FUEL Parts scheme 1420334 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9801 [1] BASE-SEPARATOR  
2. 8N-9803 [1] FILTER-FUEL (WATER SEPARATOR)  
3. 8N-9802 [1] CLAMP  
4. 111-5166 [1] BRACKET  
5. 4L-6454 [2] BOLT (3/8-16X1-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 146-0187 [2] CONNECTOR  
9. 1J-9671 [5] SEAL-O-RING  
10. 6V-8397 [15] SEAL-O-RING  
11. 3K-8460 [2] PLUG (1/2-20-THD)  
12. 6V-2611 [1] VALVE (DRAIN)  
13. 6S-8620 [1] CLAMP-HOSE  
14. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
15. 6V-8627 [1] ELBOW  
16. 8M-2773 [2] CLIP (LOOP)  
17. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
18. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
19. 3K-0360 [10] SEAL-O-RING  
20. 5E-0114 C [5] CLAMP  
21. 5E-2176 [2] CLAMP  
22. 130-3912 I [1] HOSE AS  
23. 7R-9920 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [1] NUT (10-32-THD)  
  9X-8862 [1] LOCKWASHER  
24. 8C-7974 [1] GASKET  
25. 8L-6521 [5] BOLT (10-32X0.5-IN)  
26. 4B-4274 [5] WASHER (5.5X13X1.2-MM THK)  
27. 149-5380 Y [1] PUMP GP-FUEL TRANSFER  
28. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
29. 149-5253 I [1] HOSE AS  
30. 139-5856 I [1] HOSE AS  
31. 134-4425 CI [1] HOSE AS  
32. 119-0072 [1] FILTER GP-FUEL  
33. 5P-8998 [1] FITTING  
34. 6V-9836 [1] TEE-SWIVEL  
35. 8C-6868 C [2] CONNECTOR  
36. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
37. 5P-4961 [1] CLAMP-HOSE  
38. 142-5942 I [1] HOSE AS  
39. 130-3911 I [1] HOSE AS  
40. 120-4210 [1] TANK AS-FUEL  
41. 9S-4185 C [5] PLUG (3/4-16-THD)  
42. 6V-3342 [1] ELBOW-PIPE  
43. 2T-2305 [2] ELBOW  
44. 4J-5477 [1] SEAL-O-RING  
45. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
46. 108-2153 I [1] HOSE AS  
47. 3J-1907 [2] SEAL-O-RING  
48. 5P-1442 E HOSE (110CM)  
49. 095-0912 [1] CLIP  
50. 6V-8723 C [2] ELBOW  
51. 6V-8634 [2] CONNECTOR  
52. 6V-8987 [1] ELBOW  
53. 6V-9168 [1] NUT (11/16-16-THD)  
54. 5E-8837 [1] ADAPTER  
55. 8T-9925 [1] BUSHING-TERMINAL (9/16-18 STR-THD)  
56. 5R-6306 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
57. 5R-6302 [1] CAP-DUST  
58. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
59. 123-6305 [1] CAP AS-FILLER  
60. 7X-0448 [4] NUT (5/8-11-THD)  
61. 7X-0345 [4] BOLT (5/8-11X1.75-IN)  
62. 5C-6266 [8] BOLT (5/8-11X1-IN)  
63. 8L-3471 Y [2] JOINT AS-TUBE  
64. 120-4209 [1] TANK AS-FUEL  
65. 8M-2770 [1] CLIP (LOOP)  
66. 1S-0996 C [1] CLIP  
67. 1S-6420 C [1] CLIP  
68. 8S-7169 C [1] COUPLING  
69. 9G-5127 C [1] BREATHER  
70. 3S-7386 [1] LEG-CANOPY  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01900118
 

142-0334: LINES GP-FUEL

142-0334 LINES GP-FUEL
S/N 7HN312-UP; 8GN577-UP
PART OF 115-8327 ENGINE AR
i01744895 KEBP0190
1420334 LINES GP-FUEL Parts scheme 1420334 LINES GP-FUEL Parts scheme 1420334 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4896 C [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 6V-8397 C [13] SEAL-O-RING  
3. 6V-8627 [1] ELBOW  
4. 8M-2773 C [3] CLIP (LOOP)  
5. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
7. 3K-0360 [10] SEAL-O-RING  
8. 5E-0114 [5] CLAMP  
9. 5E-2176 [2] CLAMP  
10. 130-3912 I [1] HOSE AS  
11. 7R-9920 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [1] NUT (10-32-THD)  
  9X-8862 [1] LOCKWASHER  
12. 8C-7974 [1] GASKET  
13. 8L-6521 [5] BOLT (10-32X0.5-IN)  
14. 4B-4274 [5] WASHER (5.5X13X1.2-MM THK)  
15. 149-5380 Y [1] PUMP GP-FUEL TRANSFER  
16. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
17. 149-5253 I [1] HOSE AS  
18. 134-4425 I [1] HOSE AS  
19. 119-0072 [1] FILTER GP-FUEL  
  119-0073 [1] FILTER ELEMENT-FUEL (FUEL)  
20. 5P-8998 [1] FITTING  
21. 6V-9836 [1] TEE-SWIVEL  
22. 8C-6868 [2] CONNECTOR  
23. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
24. 5P-4961 [1] CLAMP-HOSE  
25. 184-3197 CI [1] HOSE AS  
26. 130-3911 I [1] HOSE AS  
27. 120-4210 [1] TANK AS-FUEL  
28. 9S-4185 [5] PLUG (3/4-16-THD)  
29. 6V-3342 [1] ELBOW-PIPE  
30. 2T-2305 [2] ELBOW  
31. 4J-5477 [1] SEAL-O-RING  
32. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
33. 108-2153 I [1] HOSE AS  
34. 3J-1907 [2] SEAL-O-RING  
35. 6V-8723 [2] ELBOW  
36. 6V-8634 [2] CONNECTOR  
37. 6V-8987 [1] ELBOW  
38. 6V-9168 [1] NUT (11/16-16-THD)  
39. 5E-8837 [1] ADAPTER  
40. 8T-9925 [1] BUSHING-TERMINAL (9/16-18 STR-THD)  
41. 5R-6306 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
42. 5R-6302 [1] CAP-DUST  
43. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
44. 164-4858 CY [1] CAP GP-FUEL FILLER (EXTREME SERVICE, LOCKABLE)  
45. 7X-0448 [4] NUT (5/8-11-THD)  
46. 7X-0345 [4] BOLT (5/8-11X1.75-IN)  
47. 5C-6266 [8] BOLT (5/8-11X1-IN)  
48. 8L-3471 Y [2] JOINT AS-TUBE  
49. 120-4209 [1] TANK AS-FUEL  
50. 4K-8864 C [1] CLIP  
51. 1S-0996 [1] CLIP  
52. 1S-6420 [1] CLIP  
53. 8S-7169 [1] COUPLING  
54. 9G-5127 [1] BREATHER (HYDRAULIC TANK DRAIN)  
55. 3S-7386 [1] LEG-CANOPY  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP01900119
 

149-1350: LINES GP-FUEL FILTER

149-1350 LINES GP-FUEL FILTER
S/N 98Z16051-UP
PART OF 133-4245, 159-5999 ENGINE AR
i00711781 KEBP0190
1491350 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
2. 129-2145 [1] TUBE AS  
3. 129-1102 Y [1] BASE GP-FUEL FILTER  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [13] SEAL-O-RING  
6. 129-1672 [1] BRACKET  
7. 6V-8397 [8] SEAL-O-RING  
8. 7X-2459 [2] ADAPTER-TEE  
9. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
10. 9S-4191 [3] PLUG (9/16-18-THD)  
11. 5F-7054 [1] SEAL-O-RING  
12. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
13. 7E-5190 [1] TUBE AS  
14. 7E-5189 [1] VALVE AS (FUEL)  
15. 8T-0151 [1] ADAPTER  
16. 5P-1046 [1] CONNECTOR  
17. 3N-3252 [1] SPRING  
18. 1P-1670 [1] PLUG-SEAL  
19. 5P-7813 [1] SEAL-O-RING  
20. 6V-9850 [1] ELBOW  
21. 129-2146 [1] TUBE AS  
22. 149-0671 [1] TUBE AS  
23. 5M-5689 [2] CLAMP  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
26. 8T-4971 M [1] BOLT (M6X1X30-MM)  
27. 6V-8636 [2] CONNECTOR  
28. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
29. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
30. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
32. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
33. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
34. 8T-0788 [2] ELBOW  
35. 5P-4961 [2] CLAMP-HOSE  
36. 103-2529 E HOSE (87.5CM)(2EACH)  
37. 096-0061 [1] STRAP-CABLE  
38. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
39. 8C-6869 [2] CONNECTOR  
40. 129-1090 [2] VALVE-DRAIN  
41. 003-7764 [2] END-HOSE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Fuel System Filter (Screed) - Replace
AP-1000B and BG-260C Asphalt Pavers
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CFEL
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-CSARL
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Americas
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Brazil
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Specifications
Primary Fuel Filter
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Systems Operation
Solenoids
Asphalt Pavers Burner Electronic Control System
Service Letter-APD
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Troubleshooting
CID 930 FMI F03
Asphalt Pavers Burner Electronic Control System
CID 930 FMI F05
Asphalt Pavers Burner Electronic Control System
CID 930 FMI F06
Asphalt Pavers Burner Electronic Control System
CID 934 FMI F03
Asphalt Pavers Burner Electronic Control System
CID 934 FMI F05
Asphalt Pavers Burner Electronic Control System
CID 934 FMI F06
Asphalt Pavers Burner Electronic Control System
CID 938 FMI F03
Asphalt Pavers Burner Electronic Control System
CID 938 FMI F05
Asphalt Pavers Burner Electronic Control System
CID 938 FMI F06
Asphalt Pavers Burner Electronic Control System
CID 942 FMI F03
Asphalt Pavers Burner Electronic Control System
CID 942 FMI F05
Asphalt Pavers Burner Electronic Control System
CID 942 FMI F06
Asphalt Pavers Burner Electronic Control System
Disassembly and Assembly
Fuel Filter
SUPPLEMENT FOR AP-1050B & AP-1055B ASPHALT PAVER - 3116 ENGI
Fuel & Water Separator
SUPPLEMENT FOR AP-1050B & AP-1055B ASPHALT PAVER - 3116 ENGI
Fuel Filter
3116 ENGINE SUPPLEMENT FOR CATERPILLAR AP-1000B ASPHALT PAVE
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Filters On X-Series Machines {1054,1308,1261,5068}
1999/02/15
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Vent Lines For The Fuel Tanks Have Been Changed {1273}
2001/02/19
The Water Separator has been Removed {1261, 1263, 1274}
2002/02/25

Caterpillar Parts SIS Catalog AP-1000B :

FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
CAP GP-FUEL FILLER
164-4858 CAP GP-FUEL FILLER
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
TURBOCHARGER GP
124-9340 TURBOCHARGER GP
129-1213 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
131-7899 GOVERNOR GP-UNIT INJECTOR
JOINT AS-TUBE
8L-3471 JOINT AS-TUBE
390-9331 KIT-INJECTOR
LINES GP-FUEL
142-0334 LINES GP-FUEL
LINES GP-FUEL
142-0334 LINES GP-FUEL
LINES GP-FUEL
142-0334 LINES GP-FUEL

Truck sale:

Caterpillar AP-1000B, Construction
22,500 USD 
Caterpillar AP-1000B, Construction
- Asphalt pavers
MILTON CAT
Caterpillar AP-1000B, Construction
30,941 
Caterpillar AP-1000B, Construction
- Asphalt pavers
TOROMONT CAT (QUÉBEC)
Canada
Caterpillar AP-1000B, Construction
28,500 
Caterpillar AP-1000B, Construction
- Asphalt pavers
PATTEN INDUSTRIES, INC.
CATERPILLAR AP-1000B 2001
 
CATERPILLAR AP-1000B 2001
- ASPHALT PAVERS
PATTEN INDUSTRIES
United States
CATERPILLAR AP1000B 1999
 
CATERPILLAR AP1000B 1999
- ASPHALT PAVERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.