197-5326 PUMP GP-PISTON S/N 7HN264-UP; 8GN1555-UP PART OF 136-3091 ASSIST GP-FRONT WHEEL AN ATTACHMENT AP-1000B

HYDRAULIC SYSTEM

PUMP GP

0. 197-5326 PUMP GP-PI
1. 8I-0836 PUMP GP-PI
2. 8I-0961 PUMP GP-PI
3. 8I-0962 PUMP GP-PI
4. 6E-6569 ROTATING G
5. 9T-2031 ROTATING G

TANK GP

6. 111-1326 TANK GP-HY
7. 111-1326 TANK GP-HY
8. 144-3556 TANK GP-HY

VALVE GP

9. 134-4720 VALVE GP-B
0. INFORMATION

ASPHALT PAVER AP-1000B ASPHALT PAVER 7HN
AP-1000B, BG-260C Asphalt Paver 7HN00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0190 AP-1000B 7HN (1998)

HYDRAULIC SYSTEM

PUMP GP

154-6613 PUMP GP-PISTON

160-5113 PUMP GP-PISTON

197-5326 PUMP GP-PISTON

8I-0836 PUMP GP-PISTON

8I-0961 PUMP GP-PISTON

8I-0962 PUMP GP-PISTON

#KEBP01900320

197-5326: PUMP GP-PISTON

PUMP GP-PISTON

197-5326 PUMP GP-PISTON
S/N 7HN264-UP; 8GN1555-UP
PART OF 136-3091 ASSIST GP-FRONT WHEEL
AN ATTACHMENT

i01469025 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	154-6020	[1]	SHAFT
2.	154-6046	[1]	KEY
3.	3P-8680	[2]	CUP-BEARING
4.	9S-2011	[8]	SCREW-MACHINE (1/4-20X0.5-IN)
5.	7T-9831	[2]	CONE-BEARING
6.	005-8593	[2]	SEAL-O-RING
7.	9T-2003	[1]	RING
8.	8F-9206	[1]	SEAL-O-RING
9.	5F-9144	[1]	SEAL-O-RING
10.	195-8506	[1]	BLOCK-VALVE
11.	9T-3867	[1]	SPRING
12.	9T-1710	[1]	POPPET
13.	9T-1752	[1]	GASKET
14.	9T-1636	[1]	SEAT
15.	9T-2014	[2]	COVER
16.	9T-2015	[1]	HOUSING
17.	7T-9754	[1]	CONE-BEARING
18.	7T-9755	[1]	CUP-BEARING
19.	5P-0076	[6]	BOLT-12 POINT HEAD (3/8-16X1.5-IN)
20.	9T-2000	[1]	KIT-SPACER
21.	7T-9752	[1]	CONE-BEARING
22.	7T-9753	[1]	CUP-BEARING
23.	9T-2001	[1]	PIN
24.	9T-2031 Y	[1]	ROTATING GP-PUMP
25.	9T-2231	[1]	SWASHPLATE
26.	8T-5040	[1]	SEAL-LIP TYPE
27.	8Q-2979	[1]	RING
28.	9T-2002	[1]	GASKET
29.	9T-2170	[1]	ROD-PISTON
30.	9T-2173	[1]	SEAT
31.	8J-8308	[1]	PIN-ROLL
32.	9T-2171	[1]	SEAT
33.	9T-2168	[1]	SPRING
34.	9T-2232	[1]	PLATE-WAFER
35.	7L-0688	[4]	BOLT-SOCKET HEAD (10-24X1.2-IN)
36.	197-6906 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE COMPENSATOR)
37.	8T-5089	[2]	PIN-SPRING
38.	2M-9780	[1]	SEAL-O-RING
39.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
40.	9T-2017	[2]	SPACER (12.2-MM THK)

	9S-8007 F	[1]	PLUG
	7J-0204 F	[1]	SEAL-O-RING
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#KEBP01900321

8I-0836: PUMP GP-PISTON

PUMP GP-PISTON

8I-0836 PUMP GP-PISTON -AUXILIARY
S/N 7HN1-UP; 8GN1-UP
PART OF 125-9155 LINES GP-HOPPER

i00424307 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	031-0214	[8]	BOLT-LOCKING (1/4-20X0.5-IN)
2.	9T-2017	[2]	SPACER (12.2-MM THK)
3.	9T-2014	[2]	COVER
4.	9T-2011	[1]	SHIM PACK
5.	005-8593 J	[2]	SEAL-O-RING
6.	7T-9831	[2]	CONE-BEARING
7.	3P-8680	[2]	CUP-BEARING
8.	8Q-2979	[1]	RING
9.	8T-5040 J	[1]	SEAL-LIP TYPE
10.	5P-0076	[6]	BOLT-12 POINT HEAD (3/8-16X1.5-IN)
11.	9T-2168	[1]	SPRING
12.	9T-2171	[1]	SEAT
13.	9T-2173	[1]	SEAT
14.	8J-8308	[1]	PIN-ROLL
15.	9T-1752 J	[1]	GASKET
16.	7T-9754	[1]	CONE-BEARING
17.	7T-9755	[1]	CUP-BEARING
18.	9T-2172	[1]	PISTON
19.	9T-2170	[1]	ROD-PISTON
20.	7Y-5219 J	[1]	SEAL-O-RING
21.	6E-6481	[1]	SHAFT
22.	9T-1636	[1]	SEAT
23.	9T-1710	[1]	POPPET
24.	9T-3867	[1]	SPRING
25.	9T-2000	[1]	KIT-SPACER (AUXILIARY PUMP)
26.	9T-2001	[1]	PIN
27.	069-1745	[1]	PLUG
28.	9T-2031 Y	[1]	ROTATING GP-PUMP
29.	9T-2232	[1]	PLATE-WAFER
30.	9F-2247	[1]	PLUG-PIPE
31.	054-3433 J	[1]	SEAL
32.	9T-2231	[1]	SWASHPLATE
33.	9H-1113	[1]	RING-RETAINING
34.	9T-2002 J	[1]	GASKET
35.	5F-9144 J	[1]	SEAL-O-RING
36.	257-5145 Y	[1]	VALVE GP-PUMP CONTROL (AUXILIARY PUMP)
37.	8T-5089	[2]	PIN-SPRING
38.	7T-9752	[1]	CONE-BEARING
39.	7T-9753	[1]	CUP-BEARING
40.	100-4231	[1]	CONNECTOR
41.	8F-9206	[2]	SEAL-O-RING
42.	9T-3815	[1]	SEAT
43.	7L-0688	[4]	BOLT-SOCKET HEAD (10-24X1.2-IN)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	1G-9660 J	[1]	KIT-SEAL (AUXILIARY PUMP)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	Y		SEPARATE ILLUSTRATION

#KEBP01900322

8I-0961: PUMP GP-PISTON

PUMP GP-PISTON

8I-0961 PUMP GP-PISTON
S/N 7HN1-176; 8GN1-522
PART OF 115-8335 LINES GP-CONVEYOR

i00708972 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-2607 M	[2]	BOLT (M12X1.75X130-MM)
2.	8T-0372 M	[2]	BOLT (M12X1.75X90-MM)
3.	3E-7417	[2]	PLUG
4.	152-7576 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
5.	6E-6580	[1]	GASKET
6.	111-6801	[1]	CUP-BEARING
7.	111-6800	[1]	CONE-BEARING
8.	9T-3038	[1]	SHIM PACK
9.	6E-6569 Y	[1]	ROTATING GP-PUMP
10.	152-7577	[1]	SHAFT
11.	6E-6583	[1]	SWASHPLATE GP
	8F-7219	[2]	SEAL-O-RING
	139-0532	[2]	BLOCK-STOP
12.	3E-4302 M	[2]	SCREW-FLAT HEAD (M4X0.7X10-MM)
13.	6E-6573	[1]	BEARING
14.	005-0471	[1]	CONE-BEARING
15.	005-0469	[1]	CUP-BEARING
16.	033-6036	[1]	SEAL-O-RING
17.	6E-4224	[1]	PLUG-SWASHPLATE
18.	064-9829	[1]	PLUG
19.	3K-0360	[1]	SEAL-O-RING
20.	008-3214	[1]	RING-RETAINING (INTERNAL)
21.	3E-6776	[1]	SEAL-LIP TYPE
22.	5P-3863	[2]	SEAL-O-RING
23.	6E-6575	[1]	COVER
24.	6V-8337 M	[3]	BOLT-SOCKET HEAD (M8X1.25X35-MM)
25.	6E-6576	[1]	BEARING
26.	JZ	[1]	ROD
27.	JZ	[1]	PISTON
28.	9T-3030	[1]	PLATE
29.	095-0888	[2]	PIN-SPRING
30.	9T-1652	[1]	PIN
31.	9T-1636	[1]	SEAT
32.	9T-1710	[1]	POPPET
33.	9T-1699	[1]	SPRING
34.	5E-0916	[2]	SEAL-O-RING
35.	8T-5039	[3]	SEAL-O-RING
36.	6V-5684 M	[2]	BOLT (M12X1.75X45-MM)
37.	6V-8837 M	[4]	BOLT (M6X1X16-MM)
38.	JZ	[1]	SEAL
39.	HZ	[1]	SEAL
40.	HZ	[1]	ROD
41.	HZ	[1]	SPRING
42.	HZ	[1]	PISTON
43.	Z	[1]	HOUSING
44.	Z	[1]	COVER
45.	161-3921	[1]	PLATE-ADAPTER

			AVAILABLE REPAIR KIT(S):
	6E-6582 H	[1]	KIT-PISTON CONTROL
	6E-6578 J	[1]	KIT-PISTON BIAS
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#KEBP01900323

8I-0962: PUMP GP-PISTON

PUMP GP-PISTON

8I-0962 PUMP GP-PISTON
S/N 7HN1-176; 8GN1-522
PART OF 115-8335 LINES GP-CONVEYOR

i00708973 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8336 M	[1]	BOLT (M12X1.75X70-MM)
2.	8T-0372 M	[1]	BOLT (M12X1.75X90-MM)
3.	3E-7417	[2]	PLUG
4.	152-7576 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
5.	6E-6580	[1]	GASKET
6.	111-6801	[1]	CUP-BEARING
7.	111-6800	[1]	CONE-BEARING
8.	9T-3038	[1]	SHIM PACK
9.	6E-6569 Y	[1]	ROTATING GP-PUMP
10.	153-0063	[1]	SHAFT
11.	6E-6583	[1]	SWASHPLATE GP
	8F-7219	[2]	SEAL-O-RING
	139-0532	[2]	BLOCK-STOP
12.	3E-4302 M	[2]	SCREW-FLAT HEAD (M4X0.7X10-MM)
13.	6E-6573	[1]	BEARING
14.	005-0471	[1]	CONE-BEARING
15.	005-0469	[1]	CUP-BEARING
16.	033-6036	[1]	SEAL-O-RING
17.	6E-4224	[1]	PLUG-SWASHPLATE
18.	064-9829	[1]	PLUG
19.	3K-0360	[1]	SEAL-O-RING
20.	008-3214	[2]	RING-RETAINING (INTERNAL)
21.	3E-6776	[2]	SEAL-LIP TYPE
22.	5P-3863	[1]	SEAL-O-RING
23.	6E-6575	[1]	COVER
24.	6V-8337 M	[3]	BOLT-SOCKET HEAD (M8X1.25X35-MM)
25.	6E-6576	[1]	BEARING
26.	Z	[1]	ROD
27.	JZ	[1]	PISTON
28.	9T-3030	[1]	PLATE
29.	095-0888	[2]	PIN-SPRING
30.	9T-1652	[1]	PIN
31.	9T-1636	[1]	SEAT
32.	9T-1710	[1]	POPPET
33.	9T-1699	[1]	SPRING
34.	5E-0916	[2]	SEAL-O-RING
35.	8T-5039	[3]	SEAL-O-RING
36.	6V-5684 M	[4]	BOLT (M12X1.75X45-MM)
37.	6V-8837 M	[4]	BOLT (M6X1X16-MM)
38.	JZ	[1]	SEAL
39.	HZ	[1]	SEAL
40.	HZ	[1]	ROD
41.	HZ	[1]	SPRING
42.	HZ	[1]	PISTON
43.	Z	[1]	HOUSING
44.	Z	[1]	COVER

			AVAILABLE REPAIR KIT(S):
	6E-6582 H	[1]	KIT-PISTON CONTROL
	6E-6578 J	[1]	KIT-PISTON BIAS
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#KEBP01900324

6E-6569: ROTATING GP-PUMP

ROTATING GP-PUMP

6E-6569 ROTATING GP-PUMP
S/N 7HN1-UP; 8GN1-UP
PART OF 154-6612, 154-6613, 8I-0961, 8I-0962 PUMP GP-PISTON

i00403042 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	002-3455	[1]	RING-RETAINING
2.	9T-3025	[1]	GUIDE
3.	3T-0849 M	[4]	BOLT-SOCKET HEAD (M6X1X25-MM)
4.	6E-6584	[2]	PLATE-SPACER
5.	6E-6585	[2]	PLATE-LIMITER
6.	9T-3018	[9]	PISTON AS
7.	9T-3021	[1]	GUIDE
8.	9T-3023	[1]	SPRING
9.	9T-3026	[1]	BARREL
10.	9T-3019	[1]	PLATE
	M		METRIC PART

#KEBP01900325

9T-2031: ROTATING GP-PUMP

ROTATING GP-PUMP

9T-2031 ROTATING GP-PUMP
S/N 7HN1-UP; 8GN1-UP
PART OF 104-9268, 160-5113, 197-5326, 8I-0836 PUMP GP-PISTON
ALSO AN ATTACHMENT

i00169354 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-3868	[1]	KIT-PISTON (PUMP ROTATING GROUP)
			(INCLUDES PISTONS)
2.	9T-3860	[1]	PLATE
3.	9T-3859	[1]	WASHER (1.068X1.139X0.099-MM THK)
4.	9T-3862	[1]	RETAINER
5.	9T-3857	[3]	PIN
6.	9T-3863	[1]	BARREL
7.	9T-3861	[1]	WASHER (1.062X1.58X0.095-MM THK)
8.	9T-3858	[1]	SPRING
9.	9T-3864	[1]	WASHER (1.2X1.58X0.095-MM THK)
10.	004-1683	[1]	RING-SNAP

#KEBP01900326

111-1326: TANK GP-HYDRAULIC

TANK GP-HYDRAULIC

111-1326 TANK GP-HYDRAULIC
S/N 7HN1-UP; 8GN1-UP
PART OF 144-3556 TANK GP-HYDRAULIC
Type 1

i00475438 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-9340	[1]	TANK AS-HYDRAULIC
2.	8I-0943	[1]	GAUGE-SIGHT
3.	8I-0858	[5]	SCREEN-SUCTION
4.	1B-2578	[19]	NUT (3/8-16-THD)
5.	7X-9958 Y	[1]	FILTER GP-OIL
6.	077-3951 Y	[1]	CAP GP-HYDRAULIC OIL FILLER
7.	107-9430	[1]	COVER AS
8.	6V-8801	[21]	NUT (3/8-16-THD)
9.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	133-2870	[1]	GASKET
11.	5P-1075	[18]	WASHER-HARD (10.2X22.5X3-MM THK)
12.	005-8615	[1]	NIPPLE-PIPE
13.	107-9624	[1]	DIFFUSER
14.	134-3544	[1]	COUPLING-REDUCER
15.	133-7163	[2]	GASKET
	Y		SEPARATE ILLUSTRATION

#KEBP01900327

111-1326: TANK GP-HYDRAULIC

TANK GP-HYDRAULIC

111-1326 TANK GP-HYDRAULIC
S/N 7HN1-UP; 8GN1-UP
PART OF 144-3556 TANK GP-HYDRAULIC
Type 2

i01854702 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-9340	[1]	TANK AS-HYDRAULIC
2.	8I-0943	[1]	GAUGE-SIGHT (HYDRAULIC TANK)
3.	8I-0858	[5]	SCREEN-SUCTION (HYDRAULIC TANK)
4.	1B-2578	[18]	NUT (3/8-16-THD)
5.	176-9415 CY	[1]	FILTER GP-OIL (HYDRAULIC TANK)
6.	077-3951 Y	[1]	CAP GP-HYDRAULIC OIL FILLER
7.	107-9430	[1]	COVER AS
8.	6V-8801	[21]	NUT (3/8-16-THD)
9.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	236-5924	[1]	GASKET-SEAL
11.	5P-1075	[18]	WASHER-HARD (10.2X22.5X3-MM THK)
12.	005-8615	[1]	NIPPLE-PIPE
14.	134-3544	[1]	COUPLING-REDUCER
16.	5M-6755	[6]	SCREW-MACHINE (10-24X0.562-IN)
17.	309-5157	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#KEBP01900328

144-3556: TANK GP-HYDRAULIC

TANK GP-HYDRAULIC

144-3556 TANK GP-HYDRAULIC
S/N 7HN1-UP; 8GN1-UP
PART OF 115-8323 HYDRAULIC AR

i00586802 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-1326 Y	[1]	TANK GP-HYDRAULIC
2.	4W-9972	[1]	SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL)
3.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
4.	3E-7504	[1]	SWITCH GP-TEMPERATURE (HYDRAULIC OIL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
5.	155-7321	[1]	ADAPTER AS
	3D-2824	[1]	SEAL-O-RING
	6V-1722	[1]	ADAPTER
6.	6V-8801	[1]	NUT (3/8-16-THD)
7.	3K-0360	[1]	SEAL-O-RING
8.	6V-7238	[1]	VALVE-SHUTOFF (HYDRAULIC TANK)
	3K-0360	[1]	SEAL-O-RING
9.	9X-2488	[1]	CLAMP-HOSE
10.	183-3633 I	[1]	HOSE AS
11.	165-4935	[1]	PLUG AS
	6V-9510	[1]	PLUG
	7J-9108	[1]	SEAL-O-RING
12.	8T-9383	[2]	BOLT (1/2-13X0.75-IN)
13.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	6V-8188	[2]	NUT (1/2-13-THD)
15.	5P-2566	[2]	BOLT (1/2-13X1.5-IN)
16.		[4]	PLUG AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	9S-4183	[1]	PLUG (1-1/16-12-THD)
17.	148-8407	[2]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
18.	3J-1907	[1]	SEAL-O-RING
19.	4L-6454	[1]	BOLT (3/8-16X1-IN)
20.	124-6300	[1]	PLATE
21.	6V-1889	[1]	CLIP (LOOP)
22.	2M-9780	[1]	SEAL-O-RING
23.	192-0864	[1]	STEP AS
24.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
25.	208-2984	[1]	PLUG AS
	5P-7684	[1]	PLUG
	6K-6307	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

#KEBP01900329

134-4720: VALVE GP-BANK

VALVE GP-BANK

134-4720 VALVE GP-BANK
S/N 7HN1-UP; 8GN1-UP
PART OF 121-1268 LINES GP-SCREED ELEVATION

i00509484 KEBP0190

For full view, you need register

Parts for your AP-1000B ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	151-5938	[1]	VALVE-BLOCK
2.	5K-9090 J	[2]	SEAL-O-RING
3.	6R-1210	[2]	BRACKET
4.	6R-1877	[2]	TIE ROD
5.	6V-8183	[2]	NUT-FULL (3/8-24-THD)
6.	7J-9108 J	[4]	SEAL-O-RING
7.	8C-0445 J	[2]	RING-SQUARE
8.	9X-7453 J	[4]	SEAL-QUAD RING
9.	086-9083	[2]	BODY
10.	086-9085	[4]	SPRING
11.	086-9086	[4]	WASHER
12.	8T-8911	[2]	BOLT (5/16-18X2-IN)
13.	086-9094	[2]	SPOOL
14.	095-1751 J	[8]	SEAL-O-RING
15.	128-7010	[1]	VALVE GP-CHECK
16.	5P-2955	[2]	BOLT (5/16-18X2.5-IN)
17.	9X-1813 BE		SLEEVE
18.	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
19.	9W-0852	[16]	PIN-CONNECTOR (14-GA TO 16-GA)
20.	086-9080	[4]	CASE AS
21.	114-0021	[4]	COIL
22.		[2]	KIT-SOLENOID VALVE (BANK VALVE)

			AVAILABLE REPAIR KIT(S):
	086-9087 J	[1]	KIT-SEAL (BANK VALVE)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J

Information:

HYDRAULIC SYSTEM

PUMP GP

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Technical Information Bulletin

1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure
1G-9335 Pressure Control Pilot (PCP) Performance Test Procedure

Specifications

Piston Pump (Auxiliary)
AP-1000B and BG-260C Asphalt Pavers Auxiliary System

Piston Pump (Conveyor)
AP-1000B and BG-260C Asphalt Pavers Conveyor Systems

Piston Pump (Generator)
AP-1000B and BG-260C Asphalt Pavers Auxiliary System

Gear Pump (Vibratory)
AP-1000B and BG-260C Asphalt Pavers Vibratory System

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Systems Operation

Gear Pump (Vibratory)
AP-1000B and BG-260C Asphalt Pavers Vibratory System

Piston Pump (Auxiliary)
AP-1000B and BG-260C Asphalt Pavers Auxiliary System

Piston Pump (Conveyor)
AP-1000B and BG-260C Asphalt Pavers Conveyor Systems

Solenoids
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

Reuse And Salvage Guidelines

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}

Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Testing and Adjusting

Relief Valve (Vibratory Pump) - Test
AP-1000B and BG-260C Asphalt Pavers Vibratory System

Pump Control Valve (Conveyor) - Test and Adjust
AP-1000B and BG-260C Asphalt Pavers Conveyor Systems

Piston Pump Neutral - Test and Adjust
AP-1000B and BG-260C Asphalt Pavers Propel System

Relief Valve (Charge) - Test and Adjust
AP-1000B and BG-260C Asphalt Pavers Propel System

Bench Test Procedures

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}

Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}

Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}

Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}

Troubleshooting

CID 045 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 045 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 045 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 046 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 046 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 046 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 047 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 047 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 047 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 048 FMI F03
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 048 FMI F05
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

CID 048 FMI F06
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System

Disassembly and Assembly

Vibratory Pump
AP-1055B & BG-2455C ASPHALT PAVER MACHINE SYSTEMS

Auxiliary System Pump
AP-1055B & BG-2455C ASPHALT PAVER MACHINE SYSTEMS

Conveyor System Pumps
AP-1055B & BG-2455C ASPHALT PAVER MACHINE SYSTEMS

Propel System Pumps
AP-1055B & BG-2455C ASPHALT PAVER MACHINE SYSTEMS

Vibratory Pump
AP-1050B & AP-1055B ASPHALT PAVER MACHINE SYSTEMS

Auxiliary System Pump
AP-1050B & AP-1055B ASPHALT PAVER MACHINE SYSTEMS

Feeder System Pumps
AP-1050B & AP-1055B ASPHALT PAVER MACHINE SYSTEMS

Vibratory Pump
CATERPILLAR AP-1000B ASPHALT PAVER & BARBER-GREENE BG-260C A

Auxiliary Pump
CATERPILLAR AP-1000B ASPHALT PAVER & BARBER-GREENE BG-260C A

Feeder Pumps
CATERPILLAR AP-1000B ASPHALT PAVER & BARBER-GREENE BG-260C A

Propel Pump
CATERPILLAR AP-1000B ASPHALT PAVER & BARBER-GREENE BG-260C A

Generator Pump
CATERPILLAR AP-1000B ASPHALT PAVER & BARBER-GREENE BG-260C A

Service Magazine

Different Pumps Now Used On X-Series Asphalt Pavers To Increase Conveyor System Pressure {5070}
1998/08/03

The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
2000/08/14

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog AP-1000B :

160-5113 PUMP GP-PISTON

154-6613 PUMP GP-PISTON

154-6612 PUMP GP-PISTON

105-8881 PUMP GP-PISTON

105-8880 PUMP GP-PISTON

8I-0836 PUMP GP-PISTON

8I-0961 PUMP GP-PISTON

8I-0962 PUMP GP-PISTON

6E-6569 ROTATING GP-PUMP

9T-2031 ROTATING GP-PUMP

111-1326 TANK GP-HYDRAULIC

144-3556 TANK GP-HYDRAULIC

Truck sale:

22,500 USD

Caterpillar AP-1000B, Construction
- Asphalt pavers
MILTON CAT

30,941

Caterpillar AP-1000B, Construction
- Asphalt pavers
TOROMONT CAT (QUÉBEC)
Canada

28,500

Caterpillar AP-1000B, Construction
- Asphalt pavers
PATTEN INDUSTRIES, INC.

CATERPILLAR AP-1000B 2001
- ASPHALT PAVERS
PATTEN INDUSTRIES
United States

CATERPILLAR AP1000B 1999
- ASPHALT PAVERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan