AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

127-9334 SCREED AR 8-16B ASPHALT SCREED


MACHINE ARRANGEMENT
SCREED AR
FUEL SYSTEM
FUEL GP-SCREED
LINES GP-FUEL
CONTROLS
ADJUSTER GP

ASPHALT SCREED 8-16B ASPHALT SCREED 7MR
 8-16B Screed 7MR00001-UP KEBP0193 8-16B 7MR   (1998)

MACHINE ARRANGEMENT

SCREED AR
127-9334 SCREED AR
 

#KEBP01930001
 

127-9334: SCREED AR

127-9334 SCREED AR
i00990913 KEBP0193
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8I-0257 Y [1] ADJUSTER GP-HEIGHT  
  119-7093 Y [1] ARM GP-DROP  
  112-3464 Y [1] BURNER GP (DIESEL HEAT)  
  120-5898 Y [1] CROWN GP-MANUAL  
  8I-0291 Y [1] DEFLECTOR GP  
  8I-0470 Y [1] FINISH GP  
  120-5906 Y [1] FRAME GP-SCREED (8-FT)  
  145-9437 Y [1] GATE GP-END  
    -OR-
  145-9438 Y [1] GATE GP-END  
  112-3468 Y [1] LINES GP-EXTENSION  
  112-3466 Y [1] LINES GP-VIBRATORY  
  8I-0176 Y [1] PLATE GP-SCREED (DIESEL HEAT)  
  118-4338 Y [1] PLATFORM GP  
  8I-0213 Y [1] SLOPER GP-MANUAL  
  8I-0142 Y [1] VIBRATORY GP  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01930002
 

112-3464: BURNER GP

112-3464 BURNER GP -DIESEL HEAT
S/N 7MR1-2157
PART OF 127-9334 SCREED AR
i00606141 KEBP0193
1123464 BURNER GP Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-9269 C [4] CHAMBER AS-UPPER  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8I-0155 [4] CHAMBER AS (LOWER)  
5. 141-9272 C [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 030-9612 C [20] SCREW-FORMING (10-24X0.5-IN)  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 109-0334 [4] MOTOR GP-BURNER BLOWER (24-VOLT)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 E SLEEVE (64-CM)  
16. 102-2697 [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 045-4065 [16] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 C [24] LOCKWASHER  
20. 102-2736 [4] SCREEN-INLET  
21. 8J-1256 [4] CLIP  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 102-2706 [4] RING-FLAME  
24. 102-2688 [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK (FUEL FLOW)  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#KEBP01930003
 

112-3464: BURNER GP

112-3464 BURNER GP -DIESEL HEAT
S/N 7MR2158-2170
PART OF 127-9334 SCREED AR
i01370037 KEBP0193
1123464 BURNER GP Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-5091 C [4] CHAMBER AS (UPPER)  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8I-0155 [4] CHAMBER AS (LOWER)  
5. 141-9272 [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 030-9612 [20] SCREW-FORMING (10-24X0.5-IN)  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 109-0334 [4] MOTOR GP-BURNER BLOWER (24-VOLT)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 E SLEEVE (64-CM)  
16. 102-2697 [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 045-4065 [16] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 [24] LOCKWASHER  
20. 187-9760 C [4] PLATE  
21. 8J-1256 [4] CLIP  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 191-5983 C [4] CONE AS  
    (EACH INCLUDES)
  9X-6259 [1] SCREW-MACHINE (6-32X0.375-IN)  
  [1] LOCKNUT  
24. 187-9608 C [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK (FUEL FLOW)  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
30. 191-1036 C [4] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#KEBP01930004
 

112-3464: BURNER GP

112-3464 BURNER GP -DIESEL HEAT
S/N 7MR2171-UP
PART OF 127-9334 SCREED AR
i01742977 KEBP0193
1123464 BURNER GP Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-5091 C [4] CHAMBER AS (UPPER)  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8I-0155 [4] CHAMBER AS (LOWER)  
5. 141-9272 [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 030-9612 [20] SCREW-FORMING (10-24X0.5-IN)  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 206-6749 C [4] MOTOR GP-ELECTRIC (24-VOLT)(BLOWER)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 206-6728 C [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 6V-5764 C [16] SCREW-MACHINE (10-32X0.625-IN)  
19. 9F-8125 [24] LOCKWASHER  
20. 187-9760 [4] PLATE  
21. 8J-1256 [4] CLIP  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 191-5983 [4] CONE AS  
    (EACH INCLUDES)
  9X-6259 [1] SCREW-MACHINE (6-32X0.375-IN)  
  [1] LOCKNUT  
24. 187-9608 [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK (FUEL FLOW)  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
30. 191-1036 [4] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01930005
 

103-0757: LINES GP-BURNER

103-0757 LINES GP-BURNER -DIESEL HEAT
PART OF 149-2994, 192-1911 CONTROL AR-MANUAL BURNER
Type 1
AN ATTACHMENT
i00468341 KEBP0193
1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
2. 5R-6301 [1] PLUG-DUST  
3. 3K-0360 [3] SEAL-O-RING  
4. 6V-8634 [1] CONNECTOR  
5. 6V-8397 [21] SEAL-O-RING  
6. 116-8208 I [1] HOSE AS  
7. 7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0709 I [2] HOSE AS  
10. 8I-0710 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 5P-6944 [2] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 129-3078 [4] VALVE AS-SHUTOFF (BURNER)  
23. 8C-6868 [6] CONNECTOR  
24. 2T-2305 [2] ELBOW  
25. 6V-9850 [2] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
28. 3S-2093 [3] STRAP-CABLE  
29. 6V-8994 [1] UNION (STRAIGHT)  
30. 6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0712 I [1] HOSE AS  
33. 8I-0713 I [1] HOSE AS  
34. 003-8747 [2] ELBOW  
35. 8C-8988 [1] ELBOW  
36. 8M-2773 [5] CLIP (LOOP)  
37. 4M-6425 [1] BOLT (5/16-18X1-IN)  
38. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 [3] NUT (5/16-18-THD)  
40. 160-2244 G SLEEVE-ABRASION (17.5-IN EACH)  
40A. 160-2244 G SLEEVE-ABRASION (21-IN EACH)  
40B. 160-2244 G SLEEVE-ABRASION (24-IN)  
40C. 160-2244 G SLEEVE-ABRASION (12-IN)  
41. 077-8184 [8] CLAMP  
42. 6V-8918 [1] BOLT (5/16-18X1.25-IN)  
43. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
44. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01930006
 

103-0757: LINES GP-BURNER

103-0757 LINES GP-BURNER -DIESEL HEAT
PART OF 149-2994, 192-1911 CONTROL AR-MANUAL BURNER
Type 2
AN ATTACHMENT
i02451428 KEBP0193
1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
2. 5R-6301 [1] PLUG-DUST  
4. 148-8318 C [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
6. 116-8208 I [1] HOSE AS  
7. 153-6246 C [1] TEE AS  
  6V-8397 [3] SEAL-O-RING  
  7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0709 I [2] HOSE AS  
10. 8I-0710 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 148-8313 C [2] ADAPTER AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  5P-6944 [1] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 129-3078 [4] VALVE AS-SHUTOFF (BURNER)  
23. 164-5597 C [6] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8C-6868 [1] CONNECTOR  
24. 199-6290 C [2] ELBOW AS  
    (EACH INCLUDES)
  2T-2305 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
25. 148-8367 C [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
29. 149-5452 C [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 148-8377 C [1] ELBOW AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0712 I [1] HOSE AS  
33. 145-0292 CI [1] HOSE AS  
34. 003-8747 [2] ELBOW  
36. 8M-2773 C [7] CLIP (LOOP)  
37. 4M-6425 [1] BOLT (5/16-18X1-IN)  
38. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 C [2] NUT (5/16-18-THD)  
40. 160-2244 G SLEEVE-ABRASION (17.5-IN EACH)  
40A. 160-2244 G SLEEVE-ABRASION (21-IN EACH)  
40B. 160-2244 G SLEEVE-ABRASION (24-IN)  
40C. 160-2244 G SLEEVE-ABRASION (12-IN)  
42. 8T-4182 CM [2] BOLT (M10X1.5X45-MM)  
43. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
45. 148-8371 C [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
47. 077-8184 [8] CLAMP  
48. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
49. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP01930007
 

103-0757: LINES GP-BURNER

103-0757 LINES GP-BURNER -DIESEL HEAT
PART OF 149-2994, 192-1911 CONTROL AR-MANUAL BURNER
Type 3
AN ATTACHMENT
i02441569 KEBP0193
1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme 1030757 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
2. 5R-6301 [1] PLUG-DUST  
4. 148-8318 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
6. 116-8208 I [1] HOSE AS  
7. 153-6246 [1] TEE AS  
  6V-8397 [3] SEAL-O-RING  
  7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0709 I [2] HOSE AS  
10. 8I-0710 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 148-8313 [2] ADAPTER AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  5P-6944 [1] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 129-3078 [4] VALVE AS-SHUTOFF (BURNER)  
23. 164-5597 [6] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8C-6868 [1] CONNECTOR  
24. 199-6290 [2] ELBOW AS  
    (EACH INCLUDES)
  2T-2305 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
25. 148-8367 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
29. 149-5452 [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
30. 148-8377 [1] ELBOW AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0712 I [1] HOSE AS  
33. 145-0292 I [1] HOSE AS  
34. 003-8747 [2] ELBOW  
36. 8M-2773 [7] CLIP (LOOP)  
37. 4M-6425 [1] BOLT (5/16-18X1-IN)  
38. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 [2] NUT (5/16-18-THD)  
40. 160-2244 G SLEEVE-ABRASION (21-IN EACH)  
40A. 160-2244 G SLEEVE-ABRASION (17-IN EACH)  
40B. 160-2244 G SLEEVE-ABRASION (26-IN)  
40C. 160-2244 G SLEEVE-ABRASION (12-IN)  
42. 6V-7357 CM [2] BOLT (M6X1X25-MM)  
43. 8T-4205 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 148-8371 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
47. 077-8184 [8] CLAMP  
48. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
49. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP01930008
 

143-3338: LINES GP-BURNER

143-3338 LINES GP-BURNER
PART OF 149-2996 CONTROL AR-AUTOMATIC BURNER
AN ATTACHMENT
i00677509 KEBP0193
1433338 LINES GP-BURNER Parts scheme 1433338 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
2. 5R-6301 [1] PLUG-DUST  
3. 3K-0360 [3] SEAL-O-RING  
4. 6V-8634 [1] CONNECTOR  
5. 6V-8397 [33] SEAL-O-RING  
6. 116-8208 I [1] HOSE AS  
7. 7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 5P-4653 [1] CONNECTOR  
10. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
11. 8I-0400 [1] ADAPTER  
12. 5P-4317 [1] CONNECTOR  
13. 3J-1907 [10] SEAL-O-RING  
14. 5P-6944 [2] ADAPTER  
15. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
16. 5R-6302 [2] CAP-DUST  
17. 8C-6868 [4] CONNECTOR  
18. 6V-9850 [3] ELBOW  
19. 8I-0705 I [4] HOSE AS  
20. 8I-0709 I [1] HOSE AS  
21. 6V-8994 [1] UNION (STRAIGHT)  
22. 6V-8980 [1] ELBOW  
23. 8S-7169 [2] COUPLING  
24. 8I-0712 I [1] HOSE AS  
25. 8I-0713 I [1] HOSE AS  
26. 003-8747 [2] ELBOW  
27. 6V-9836 [4] TEE-SWIVEL  
28. 8M-2773 [2] CLIP (LOOP)  
29. 6V-8918 [1] BOLT (5/16-18X1.25-IN)  
30. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
31. 6V-8189 [1] NUT (5/16-18-THD)  
32. 160-2244 BE SLEEVE-ABRASION  
33. 6V-9001 [2] ELBOW  
34. 141-9277 [4] VALVE AS-SOLENOID  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 BE SLEEVE  
35. 6V-8724 [6] ELBOW  
36. 8I-0704 I [1] HOSE AS  
37. 3S-2093 [4] STRAP-CABLE  
38. 8C-8988 [1] ELBOW  
39. 8T-0788 [1] ELBOW  
40. 077-8184 [2] CLAMP  
41. 5P-2675 [8] BOLT (1/4-20X1.75-IN)  
42. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
43. 6V-8185 [4] NUT (1/4-20-THD)  
44. 117-8571 I [2] HOSE AS  
45. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
46. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
47. [1] HOSE AS  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01930009
 

102-2703: ADJUSTER GP-HEIGHT

102-2703 ADJUSTER GP-HEIGHT -MANUAL
PART OF 8I-0257 ADJUSTER GP-HEIGHT
i00465645 KEBP0193
1022703 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 8-16B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 163-5736 [1] SCREW-LIFTING  
3. 107-0247 [1] GEAR-WORM  
4. 3P-8680 [2] CUP-BEARING  
5. 187-5527 [1] HOUSING  
6. 107-0250 [1] GUIDE-BUSHING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 163-5737 [1] PIPE  
9. 2D-6398 [2] RING-RETAINING  
10. 8L-4070 [2] BALL BEARING  
11. 7T-9831 [2] CONE-BEARING  
12. 112-2181 [1] WORM  
13. 142-6282 [1] CAP  
   
  8T-5069 F [4] SETSCREW-SOCKET (10-24X0.25-IN)  
  F   NOT SHOWN
 

Information:

Specifications
Introduction
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Systems Operation
Systems Operation
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Testing and Adjusting
Testing And Adjusting
8-16B, 10-20B & 10-20WB EXTEND-A-MAT SCREEDS
Service Magazine
Improved Screed Hoses {7554,5057}
1998/04/13
Addition Of Screed Deflectors {6643}
1998/09/07
Installation Replacement For Screed Extender Support Bushings {6641}
1998/10/05
Installation Replacement For Screed Extender Support Bushings {6641}
1999/01/25
New Actuator Motors Available for Power Screed Options {6640}
1999/02/15
New Screed Plates Are Now Available {6641}
1999/04/19
Correction to the Callouts for the Extender Cylinder {5640, 6640, 6641}
2000/09/04
A New Procedure for Securing the Lines on the Extender is Now Available for the Asphalt Screeds {1408, 6642}
2006/02/20

Caterpillar Parts SIS Catalog 8-16B :

BURNER GP
112-3464 BURNER GP
BURNER GP
112-3464 BURNER GP
BURNER GP
112-3464 BURNER GP
LINES GP-BURNER
103-0757 LINES GP-BURNER
LINES GP-BURNER
103-0757 LINES GP-BURNER
LINES GP-BURNER
103-0757 LINES GP-BURNER
LINES GP-BURNER
143-3338 LINES GP-BURNER
ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT

Truck sale:

 
$35,000 USD 
CATERPILLAR 816B 1992
- COMPACTORS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
1989 CAT 816B
Call 
1989 CAT 816B

ima noleggi
 
 
CAT 816B

RD Williams Parts
1987 CAT 816B
USD $40,023 
1987 CAT 816B

ima noleggi
1985 CAT 816B
USD $67,213 
1985 CAT 816B

EMSCO
Regina, Saskatchewan, Canada S4R 8R6
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.