8N-3148 COVER GP-CYLINDER BLOCK S/N 41Z4926-UP PART OF 131-4021, 165-8137 ENGINE AR PM-465 COLD PLANER

BASIC ENGINE

CYLINDER BLOCK GP

0. 8N-3148 COVER GP-C

HOUSING GP-FLYWHEEL

1. 165-8309 COVER GP-F
2. 1W-8341 COVER GP-F
3. 4N-4792 COVER GP-F

HOUSING GP-FRONT

4. 1W-1395 COVER GP-F

VALVE MECHANISM GP

5. 6I-3818 COVER GP-V

CRANKSHAFT GP

6. 430-2593 CRANKSHAFT
7. 4N-0741 CRANKSHAFT
8. 4N-0741 CRANKSHAFT

CYLINDER BLOCK GP

9. 202-1257 CYLINDER B
0. INFORMATION

COLD PLANER PM-465 COLD PLANER 5ZS
PM-465 Cold Planer 5ZS00001-UP (MACHINE) POWERED BY 3406 Engine KEBP0200 PM-465 5ZS (1996)

BASIC ENGINE

CYLINDER BLOCK GP

8N-3148 COVER GP-CYLINDER BLOCK

202-1257 CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS

108-3914 CYLINDER BLOCK GP

#KEBP02000010

8N-3148: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

8N-3148 COVER GP-CYLINDER BLOCK
S/N 41Z4926-UP
PART OF 131-4021, 165-8137 ENGINE AR

i00430249 KEBP0200

8N3148 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[4]	BOLT (3/8-16X1-IN)
2.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	4W-9890	[2]	COVER
4.	4N-0699	[2]	GASKET

#KEBP02000011

165-8309: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

165-8309 COVER GP-FLYWHEEL HOUSING
S/N 41Z15282-UP
PART OF 165-8137 ENGINE AR

i01191018 KEBP0200

1658309 COVER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3H-0761	[1]	COVER-OPENING
2.	9Y-6089	[1]	GASKET
3.	4B-4043	[3]	BOLT (5/8-11X1.375-IN)
4.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)

#KEBP02000012

1W-8341: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

1W-8341 COVER GP-FLYWHEEL HOUSING
S/N 41Z19451-UP
PART OF 165-8137 ENGINE AR
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING

i00353803 KEBP0200

1W8341 COVER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[2]	BOLT (3/8-16X1-IN)
2.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	1M-0130	[1]	COVER
4.	4M-6480	[1]	GASKET

#KEBP02000013

4N-4792: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

4N-4792 COVER GP-FLYWHEEL HOUSING
S/N 41Z4926-UP
PART OF 131-4021, 165-8137 ENGINE AR

i00147167 KEBP0200

4N4792 COVER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
2.	5H-0244	[1]	GASKET
3.	8F-3030	[1]	FLANGE
4.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
5.	0S-1619	[1]	BOLT (3/8-16X3-IN)
6.	2P-2772	[1]	COVER
7.	234-8937	[1]	SEAL-INTEGRAL
8.	0S-1594	[1]	BOLT (3/8-16X1-IN)
9.	9Y-6089 C	[1]	GASKET
10.	4B-4043 C	[3]	BOLT (5/8-11X1.375-IN)
11.	5P-8247 C	[3]	WASHER-HARD (17X32X3.5-MM THK)
12.	3H-0761 C	[1]	COVER-OPENING
	C		CHANGE FROM PREVIOUS TYPE

#KEBP02000014

1W-1395: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

1W-1395 COVER GP-FRONT HOUSING
S/N 41Z4926-UP
PART OF 131-4021, 165-8137 ENGINE AR

i00355594 KEBP0200

1W1395 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-5733	[1]	GASKET
2.	4N-0273	[1]	COVER
3.	5M-2894	[22]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	0S-1588	[5]	BOLT (3/8-16X1.25-IN)(MARKED X)
5.	1A-5964	[7]	BOLT (3/8-16X4.5-IN)
6.	315-5008 B	[2]	STUD-TAPERLOCK
7.	2M-0849 B	[2]	WASHER-HARD (13.5X25.5X5-MM THK)
8.	1F-7958	[5]	NUT-FULL (1/2-13-THD)
9.	1H-7339 C	[1]	SEAL-O-RING
10.	4P-1650 C	[1]	COVER
11.	9S-8752 C	[10]	NUT-FULL (3/8-16-THD)
12.	6V-4259	[2]	BOLT-SHALLOW HEAD (3/8-16X0.5-IN)
13.	7W-9467	[1]	COVER
14.	1W-2488	[1]	COVER
15.	2W-0459	[1]	GASKET
16.	2B-2006	[1]	BOLT (1/2-13X4.75-IN)
17.	9S-1366	[1]	BOLT (1/2-13X2.5-IN)
18.	100-7432	[1]	GASKET
19.	5P-8245	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
20.	5M-6214	[1]	PLUG (1/8-27 PTF)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#KEBP02000015

6I-3818: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

6I-3818 COVER GP-VALVE MECHANISM
S/N 41Z4926-UP
NO OIL FILL
PART OF 131-4021, 165-8137 ENGINE AR
CANNOT BE USED WITH JAKE BRAKE OR PACBRAKE

i00397819 KEBP0200

6I3818 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-0330	[1]	COVER (ROCKER ARM)
2.	7C-9621	[2]	PLUG
	8C-5196	[2]	SEAL-O-RING
3.	7E-0329	[2]	BASE
4.	9L-8925	[26]	BOLT (5/16-18X1.25-IN)
5.	5P-5678 BD		SEAL
6.	7E-1518	[1]	COVER AS
	7E-0330	[1]	COVER (ROCKER ARM)
7.	7C-6514	[1]	ADAPTER
8.	7C-9621	[1]	PLUG
9.	8C-5196	[2]	SEAL-O-RING

	3S-6252 ABF		SEALANT
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	F		NOT SHOWN

#KEBP02000016

430-2593: CRANKSHAFT AS

CRANKSHAFT AS

430-2593 CRANKSHAFT AS
S/N 41Z13657-UP
PART OF 4N-0741 CRANKSHAFT GP

i05941503 KEBP0200

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-0684	[1]	DOWEL
2.	7S-5005	[1]	DOWEL
3.	1W-9302	[1]	GEAR-CRANKSHAFT (80-TEETH)

#KEBP02000017

4N-0741: CRANKSHAFT GP

CRANKSHAFT GP

4N-0741 CRANKSHAFT GP
S/N 41Z4926-UP
PART OF 131-4021, 165-8137 ENGINE AR

i00122071 KEBP0200

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	317-8766 J	[7]	BEARING-MAIN (STANDARD)
	4W-5698 AB		BEARING-MAIN (0.63-MM US)
	4W-5699 AB		BEARING-MAIN (1.27-MM US)
	4W-5700 AB		BEARING-MAIN (0.63-MM OS)
	4W-5701 AB		BEARING-MAIN (0.63-MM OS, 0.63-MM US)
2.	6I-1453	[1]	CRANKSHAFT AS
2A.	1W-9302	[1]	GEAR-CRANKSHAFT (80-TEETH)
2B.	7S-5005	[1]	DOWEL
2C.	4N-0684	[1]	DOWEL
3.	253-1752 J	[2]	PLATE-THRUST
4.	319-0785 Y	[1]	SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)
5.	319-7401 Y	[1]	SEAL GP-CRANKSHAFT (FRONT)

			AVAILABLE REPAIR KIT(S):
	243-6718 AJ		KIT-CRANKSHAFT BEARING (STANDARD)
			(INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#KEBP02000018

4N-0741: CRANKSHAFT GP

CRANKSHAFT GP

4N-0741 CRANKSHAFT GP
S/N 41Z13657-UP
PART OF 165-8137 ENGINE AR

i05941433 KEBP0200

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	317-8766 J	[7]	BEARING-MAIN (STANDARD)
	4W-5698 AB		BEARING-MAIN (0.63-MM US)
	4W-5699 AB		BEARING-MAIN (1.27-MM US)
	4W-5700 AB		BEARING-MAIN (0.63-MM OS)
	4W-5701 AB		BEARING-MAIN (0.63-MM OS, 0.63-MM US)
2.	430-2593 Y	[1]	CRANKSHAFT AS
3.	253-1752 J	[2]	PLATE-THRUST
4.	319-0785 Y	[1]	SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)
5.	319-7401 Y	[1]	SEAL GP-CRANKSHAFT (FRONT)

			AVAILABLE REPAIR KIT(S):
	243-6718 AJY	[1]	KIT-CRANKSHAFT BEARING (STANDARD)
			(INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#KEBP02000019

202-1257: CYLINDER BLOCK AS

CYLINDER BLOCK AS

202-1257 CYLINDER BLOCK AS
S/N 41Z19826-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP

i01570723 KEBP0200

For full view, you need register

Parts for your PM-465 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	167-8081	[7]	CAP-CRANKSHAFT BEARING
2.	167-8083	[14]	BOLT (7/8-14X7.5-IN)
3.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

The Cylinder Liners Have a New Appearance {1216}
2005/03/01

Special Instruction

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Tool Operating Manual

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Magazine

Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24

The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog PM-465 :

7W-3798 CAMSHAFT GP

4P-1912 AIR COMPRESSOR GP

4P-0676 AIR COMPRESSOR GP

354-7532 AIR COMPRESSOR GP

124-8706 INSTALLATION AR-ENGINE

165-8137 ENGINE AR

131-4021 ENGINE AR

124-8701 GENERAL AR

165-8309 COVER GP-FLYWHEEL HOUSING

1W-8341 COVER GP-FLYWHEEL HOUSING

4N-4792 COVER GP-FLYWHEEL HOUSING

1W-1395 COVER GP-FRONT HOUSING

6I-3818 COVER GP-VALVE MECHANISM

430-2593 CRANKSHAFT AS

4N-0741 CRANKSHAFT GP

Truck sale:

CATERPILLAR PM-465 2003
- COLD PLANERS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -

USD $83,000

1997 CAT PM-465

Ransome CAT
Bensalem, Pennsylvania

USD $87,500

2003 CAT PM-465

Vesco Tractors, LLC
Georgia

CATERPILLAR PM-465 1997
- COLD PLANERS
RANSOME CAT
Pennsylvania United States

USD $109,500

2002 CAT PM-465

Gateway Machinery, LLC
Syracuse, New York