7E-8794 DRIVE GP-GOV & TRANSFER PUMP S/N 4TF52183-UP; 98Z33158-38205 PART OF 133-3062 GOVERNOR GP-UNIT INJECTOR CS-563D

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 4TF52183-UP; 98Z33158-38205
PART OF 133-3062 GOVERNOR GP-UNIT INJECTOR

Parts for your CS-563D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	4P-5612	[1]	HOUSING AS-FRONT
1A.	101-0768	[1]	GEAR AS-DRIVE (44-TEETH)
	8T-0114	[1]	PIN-SPRING
1B.	7S-6798	[1]	SEAL-LIP TYPE
1C.	7S-5005	[2]	DOWEL
1D.	9Y-3107 M	[1]	BOLT (M8X1.25X45-MM)
2.		[1]	SPRING-TORSION
3.	4P-9490	[1]	SHAFT AS-SHUTOFF
3A.	9X-8902 M	[4]	BOLT-SOCKET HEAD (M3X0.5X8-MM)
3B.	4P-9492	[1]	BRACKET-SHAFT
3C.	4P-9493	[1]	LEVER-SHUTOFF (SOLENOID)
3D.	4P-9494	[1]	SPRING-SHUTOFF
3E.	105-0585	[1]	LEVER-SHUTOFF (OUTPUT)
4.	6V-5213 M	[2]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
5.	7W-5615	[1]	SLEEVE AS-PUMP
	1W-0565	[1]	RING-RETAINING
6.	4D-9986	[2]	SEAL-O-RING
7.	4P-3953	[1]	PISTON AS
8.	7E-0156	[1]	FITTING-INLET
9.	4P-4224	[1]	COVER-TRANSFER PUMP
10.	7C-5294	[1]	SPRING
11.	8C-6364 M	[3]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
12.	7E-9898	[1]	CONNECTOR
13.	3J-1907	[2]	SEAL-O-RING
14.	7W-7383	[2]	VALVE AS-CHECK
15.	7E-3943	[1]	LEVER-CONTROL
16.	9Y-9846 M	[1]	SCREW-LOCATOR
17.	6L-8598	[2]	RING-RETAINING
18.	4P-3538	[1]	SHAFT-THROTTLE
19.	7E-3944	[1]	SLEEVE
	M		METRIC PART

7W-4812: FASTENER GP-FUEL INJ PUMP

FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 4TF52183-UP; 98Z33158-38205
PART OF 137-1408 GOVERNOR GP, 113-6219 GOVERNOR GP-UNIT INJECTOR

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-3872 J	[1]	SLEEVE
2.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
3.	6V-5218 M	[3]	BOLT (M8X1.25X35-MM)
4.	9Y-5295	[1]	TUBE
5.	6F-6673	[1]	SEAL-O-RING
6.	7C-3839	[1]	CLIP-SPRING
7.	7E-0844	[1]	SEAL
8.	1T-1068	[1]	SEAL-O-RING (FUEL INJECTION PUMP)
	J		INSTALL SLEEVE IN FRONT HOUSING
	M		METRIC PART

115-2544: GOVERNOR GP

GOVERNOR GP

115-2544 GOVERNOR GP
S/N 4TF52183-UP; 98Z33158-38205
PART OF 137-1408 GOVERNOR GP, 113-6219 GOVERNOR GP-UNIT INJECTOR

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-3062 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	117-1147	[1]	CAM AS
3.	4P-2467	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	100-4391	[1]	SPRING-OIL SIDE
	Y		SEPARATE ILLUSTRATION

137-1408: GOVERNOR GP

GOVERNOR GP

137-1408 GOVERNOR GP
S/N 4TF80272-UP
PART OF 143-0037 ENGINE AR

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7W-4812 Y	[1]	FASTENER GP-FUEL INJ PUMP
115-2544 Y	[1]	GOVERNOR GP
7W-8434 Y	[1]	LINES GP-GOVERNOR OIL
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

113-6219: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

113-6219 GOVERNOR GP-UNIT INJECTOR
S/N 4TF52183-UP; 98Z33158-38205
PART OF 143-0037 ENGINE AR

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7W-4812 Y	[1]	FASTENER GP-FUEL INJ PUMP
115-2544 Y	[1]	GOVERNOR GP
135-1716 Y	[1]	LINES GP-GOVERNOR OIL
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

133-3062: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

133-3062 GOVERNOR GP-UNIT INJECTOR
S/N 4TF52183-UP; 98Z33158-38205
PART OF 115-2544 GOVERNOR GP

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7325	[1]	HOUSING AS
	100-5734	[1]	SHAFT-LIMIT
2.	129-3897	[1]	VALVE
3.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
4.	4P-3539	[1]	LEVER-THROTTLE
5.	4P-3537	[1]	RING-TOLERANCE
6.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
7.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
8.	5C-2874 M	[1]	NUT (M5X0.8-THD)
9.	100-5740	[1]	SPRING-TORSION
10.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
11.	6V-8189	[1]	NUT (5/16-18-THD)
12.	100-5732	[1]	LEVER-TORQUE CAM
13.	105-9790	[1]	BRACKET AS
	8N-0984	[1]	PIN-SPRING
14.	100-5736 M	[1]	SCREW (M6X0.5X22.5-MM)
15.	100-5738 M	[1]	NUT (M6X0.5-THD)
16.	101-1167 M	[2]	SCREW-BUTTON HEAD (M5X0.8X14-MM)
17.	7C-5480	[1]	SPRING-TORSION
18.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
19.	4P-7351	[1]	LEVER AS-SHAFT
20.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
21.	107-7498	[1]	BLOCK AS-BEARING
22.	7E-3217	[1]	LEVER AS
23.	3P-3547	[1]	RING-RETAINING
24.	8C-8546 M	[1]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
25.	7C-4483	[1]	SCREEN AS (OIL INLET)(UNIT INJECTOR)
26.	100-5742	[1]	LEVER AS-CONTROL
	100-5733	[1]	PIN
27.	100-5739	[1]	SPRING-TORSION
28.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
29.	8T-7060	[1]	RING-RETAINING
30.	100-8311	[1]	RING (TOLERANCE)
31.	7C-5148	[1]	CARRIER-FLYWEIGHT
32.	2S-7316	[2]	DOWEL
33.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
34.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
35.	4P-8947	[1]	RISER
36.	4P-0737	[1]	SHAFT-RISER
37.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
38.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
39.	7L-3386	[1]	SEAL-O-RING
40.	7C-5884	[1]	COVER-OIL SUMP
41.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
42.	4P-4231	[1]	COVER-REAR
43.	6V-5100	[1]	SEAL-O-RING
44.	7C-5883 B	[7]	SHIM (0.25-MM THK)
45.	7W-5591	[1]	SEAT-GOVERNOR SPRING
46.	7C-3776	[1]	PISTON AS
46A.	4N-6407	[1]	SPOOL-DASHPOT
46B.	4N-6404	[1]	RING-RETAINING
46C.	4N-6406	[1]	RING-SPACER
47.	4P-8948	[1]	SEAT AS-SPRING
		[1]	INSERT
48.	7W-8993	[2]	WEIGHT
49.	7C-5541	[2]	PLATE
50.	7W-1440 B	[8]	SHIM (0.12-MM THK)
51.	115-1192	[1]	SEAL-GOVERNOR HOUSING
52.	7C-2743	[2]	RACE
53.	7W-5561	[1]	BEARING-THRUST
54.	8C-5061	[1]	RING-RETAINING
55.	8C-8546 M	[8]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
56.	7C-5150	[1]	PIN
57.	117-9099	[1]	FLANGE
58.	9Y-1837	[1]	SPRING
59.	125-8158	[1]	SLEEVE-RACK CONTROL
60.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
61.	5P-9757	[1]	SEAL-O-RING
62.	109-4587	[1]	RING-TOLERANCE
63.	6D-9953	[1]	PIN-SPRING
64.	8T-1460	[2]	RING-RETAINING
65.	108-1612	[1]	CLEVIS
66.	7C-8854	[1]	PIN-CLEVIS
67.	108-1613	[1]	PISTON-SERVO
68.	8C-3312	[1]	RING-RETAINING
69.	114-2897	[1]	COVER-FUEL RATIO CONTROL
70.	7N-2171	[1]	RING-RETAINING
71.	7W-5324	[1]	BEARING
72.	115-2553	[1]	VALVE-GOVERNOR SERVO
73.	100-4390	[1]	SPRING
74.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
75.	129-4284	[1]	SEAT-SPRING
76.	6I-1564	[1]	DIAPHRAGM
77.	114-2899	[1]	RETAINER-DIAPHRAGM
78.	100-4392	[1]	SPRING-SERVO
79.	100-4394	[1]	SEAT-SPRING
80.	8N-5763	[1]	SEAL
81.	8N-5764	[1]	PISTON
82.	100-4393	[1]	SPRING-RETURN
83.	100-4397	[1]	BODY-VALVE
84.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
85.	100-5738 M	[1]	NUT (M6X0.5-THD)
86.	2M-9780	[2]	SEAL-O-RING
87.	128-4786	[2]	PLUG
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

143-6261: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

143-6261 LINES GP-FUEL FILTER
S/N 1SZ1-UP
PART OF 163-3208 INSTALLATION AR-ENGINE

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	149-2683 Y	[1]	SEPARATOR GP-WATER
2.	152-0269 I	[1]	HOSE AS
3.	152-0270 I	[2]	HOSE AS
4.	3J-1907	[5]	SEAL-O-RING
5.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
6.	6V-8397	[6]	SEAL-O-RING
7.	6V-8636	[2]	CONNECTOR
8.	6V-9001	[1]	ELBOW
9.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
10.	9S-8004	[2]	PLUG (9/16-18-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

158-5074: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

158-5074 LINES GP-FUEL FILTER
S/N 4TF52183-UP; 98Z33158-38205
PART OF 143-0037 ENGINE AR

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-9024	[2]	WASHER-HARD (10.2X22.5X5-MM THK)
2.	129-2145	[1]	TUBE AS
3.	129-1102 Y	[1]	BASE GP-FUEL FILTER
4.	6V-8724	[1]	ELBOW
5.	3J-1907	[11]	SEAL-O-RING
6.	129-1672	[1]	BRACKET
7.	6V-8397	[6]	SEAL-O-RING
8.	7X-2459	[1]	ADAPTER-TEE
9.	6V-6317 M	[5]	BOLT (M10X1.5X20-MM)
10.	9S-4191	[3]	PLUG (9/16-18-THD)
11.	5F-7054	[1]	SEAL-O-RING
12.	6V-2317 M	[2]	BOLT (M8X1.25X30-MM)
13.	7E-5190	[1]	TUBE AS
14.	7E-5189	[1]	VALVE AS (FUEL)
15.	8T-0151	[1]	ADAPTER
16.	1R-0751	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
17.	3N-3252	[1]	SPRING
18.	5P-7813	[1]	SEAL-O-RING
19.	6V-8781	[1]	TEE
20.	129-2146	[1]	TUBE AS
21.		[1]	TUBE AS
22.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
23.	1R-0753	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
24.	141-8275	[2]	VALVE-DRAIN (FUEL)
25.	1P-4278	[2]	CLAMP-HOSE
26.	103-2529 E		HOSE (10-CM EACH)
27.	6V-8636	[2]	CONNECTOR
28.	6V-1820 M	[4]	BOLT (M10X1.5X30-MM)
29.	6V-5217 M	[3]	BOLT (M8X1.25X20-MM)
30.	6V-5839	[6]	WASHER (11X21X2.5-MM THK)
31.	5M-5689	[2]	CLAMP
32.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
33.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
34.	6V-8225 M	[1]	NUT (M6X1-THD)
35.	122-3324	[1]	BRACKET
36.	3E-4353	[1]	WASHER-HARD (11X25X3-MM THK)
37.	6V-3940 M	[1]	BOLT (M8X1.25X25-MM)
38.	3E-4352	[2]	WASHER-HARD (8.8X20.5X2.5-MM THK)
39.	5P-7970 M	[1]	NUT (M8X1.25-THD)
40.	9S-1350	[1]	CLIP
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

107-7731: LINES GP-FUEL RATIO CONTROL

LINES GP-FUEL RATIO CONTROL

107-7731 LINES GP-FUEL RATIO CONTROL
S/N 4TF52183-UP; 98Z33158-38205
PART OF 143-0037 ENGINE AR

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8647	[1]	CONNECTOR
2.	6V-8723	[1]	ELBOW
3.	107-7680	[1]	TUBE AS
4.	3K-0360	[1]	SEAL-O-RING
5.	4J-5477	[1]	SEAL-O-RING
6.	3J-7354	[1]	SEAL-O-RING
7.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
8.	6V-8397	[1]	SEAL-O-RING
9.	8M-2772	[1]	CLIP (LOOP)

135-1716: LINES GP-GOVERNOR OIL

LINES GP-GOVERNOR OIL

135-1716 LINES GP-GOVERNOR OIL
S/N 4TF52183-80271; 98Z33158-38205
PART OF 113-6219 GOVERNOR GP-UNIT INJECTOR

Parts for your CS-563D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-3313	[1]	TEE-O-RING
2.	135-8657	[1]	TUBE AS
3.	6V-8647	[1]	CONNECTOR
4.	3J-7354	[3]	SEAL-O-RING
5.	4J-5477	[2]	SEAL-O-RING
6.	8C-3445	[1]	CAP-DUST
7.	8C-3446	[1]	VALVE-SAMPLING
8.	3J-1907	[1]	SEAL-O-RING
9.	5P-9617	[1]	ADAPTER

Information:

FUEL SYSTEM

GOVERNOR GP

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}

Governor Performance Data{1264}
Governor Performance Data{1264}

Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}

Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Service Letter-NACD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly

Specifications

Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Specification
3114, 3116 and 3126 MUI Engine Governors

Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Tool Operating Manual

Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}

Service Letter-China

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Asia

Systems Operation

Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors

Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors

Information Release Memo

PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS

Service Letter-APD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Testing and Adjusting

Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors

Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors

Governor - Adjust
3114, 3116, and 3126 Engines

Disassembly and Assembly

Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Service Magazine

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21

New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01

Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog CS-563D :

Truck sale:

CATERPILLAR CS-563D 2000
- COMPACTORS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr

USD $66,950

2002 CAT CS-563D

Global Heavy Resources Inc.

CATERPILLAR CS-563D 2001
- WT - COMPACTOR
MANTRAC TANZANIA LTD.

USD $40,190

2003 CAT CS-563D

Gleneden Plant Sales
Great Barford, England, United Kingdom

CATERPILLAR CS-563D 2000
- VIBRATORY SINGLE DRUM SMOOTH
BLANCHARD MACHINERY