AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

257-5145 VALVE GP-PUMP CONTROL -AUXILIARY PUMP S/N ABB1-UP; ACM1-UP PART OF 8I-0836 PUMP GP-PISTON AP-1055B


HYDRAULIC SYSTEM
PUMP GP
VALVE GP-RELIEF
VALVE GP-SOLENOID
VIBRATORY GP
OPERATOR STATION
CONSOLE GP

ASPHALT PAVER AP-1055B ASPHALT PAVER ABB
 Caterpillar AP-1055B, Barber-Greene BG-2455C Asphalt Paver ABB00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0211 AP-1055B ABB   (1999)

HYDRAULIC SYSTEM

PUMP GP
VALVE GP-PUMP CONTROL
196-6988 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
214-7732 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
257-5145 VALVE GP-PUMP CONTROL
 

#KEBP02110390
 

257-5145: VALVE GP-PUMP CONTROL

257-5145 VALVE GP-PUMP CONTROL -AUXILIARY PUMP
S/N ABB1-UP; ACM1-UP
PART OF 8I-0836 PUMP GP-PISTON
i02188548 KEBP0211
2575145 VALVE GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8001 [1] PLUG  
2. 6E-6614 [1] BODY-COMPENSATOR  
3. 9T-3813 [1] PLUG  
4. 5L-4758 [1] SEAL-O-RING  
5. 9T-3814 [1] SPRING  
6. 9T-3815 [1] SEAT  
7. 6E-6613 [1] SPOOL-COMPENSATOR  
8. 4J-7533 [1] SEAL-O-RING  
 

#KEBP02110391
 

176-3200: VALVE GP-RELIEF

176-3200 VALVE GP-RELIEF
S/N ABB1-UP; ACM1-UP
FIELD INSTALLATION
i01371420 KEBP0211
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1G-9194 [2] GASKET  
  123-5208 [2] GASKET-CONTROL  
  175-5581 [4] ORIFICE  
  5E-8777 [4] PLUG  
  170-4717 [1] SEAL-O-RING  
  159-4010 [4] KIT-RELIEF VALVE (PRESSURE LIMITER)  
  5E-8747 [4] VALVE-CHECK  
 

#KEBP02110392
 

103-3602: VALVE GP-SOLENOID

103-3602 VALVE GP-SOLENOID
S/N ABB1-UP; ACM1-UP
PART OF 112-3469, 197-5289 LINES GP-EXTENDER, 197-5285 LINES GP-SLOPE
AN ATTACHMENT
i00948683 KEBP0211
1033602 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] KIT-SOLENOID VALVE  
2. [1] KIT-SOLENOID VALVE  
    (INCLUDES BODY, O-RING SEALS, SPRING, SEAT & SPOOL)
3. 114-0021 [2] COIL  
4. 134-5939 [1] VALVE-BLOCK  
5. 102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
6. 9X-1813 E SLEEVE (15-CM EACH)  
   
    AVAILABLE REPAIR KIT(S):
  [1] KIT-SEAL (SOLENOID VALVE)  
  E   ORDER BY THE CENTIMETER
 

#KEBP02110393
 

332-1453: VALVE GP-SOLENOID

332-1453 VALVE GP-SOLENOID
S/N ABB1-UP; ACM1-UP
PART OF 311-1959 LINES GP-SLOPE
AN ATTACHMENT
i03468725 KEBP0211
3321453 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 369-4724 J [2] VALVE GP-SOLENOID (24-VOLT)(EXTENDER SLOPE)  
    (EACH INCLUDES)
  2N-0402 [4] BOLT-SOCKET HEAD (10-24X1.75-IN)  
  375-5986 [2] COIL-SOLENOID  
  375-5987 [2] NUT-SPECIAL  
2. 030-0167 [4] RING-BACKUP  
3. 313-2505 [4] VALVE-CHECK  
    (EACH INCLUDES)
  255-6257 [1] KIT-SEAL (CHECK VALVE)  
    (INCLUDES O-RINGS & BACKUP RING)
   
    AVAILABLE REPAIR KIT(S):
  313-3551 J [1] KIT-SEAL  
    (INCLUDES O-RING SEALS & RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#KEBP02110394
 

110-0998: VIBRATORY GP

110-0998 VIBRATORY GP
S/N ABB1-UP; ACM1-UP
PART OF 109-7071 SCREED AR-FIXED
AN ATTACHMENT
i00494291 KEBP0211
1100998 VIBRATORY GP Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-1276 [1] SHAFT GP-DRIVE (ECCENTRIC WEIGHT)  
2. 102-2695 [4] BEARING  
3. 139-2372 [1] COUPLING  
4. 105-1533 [2] KEY-SQUARE  
5. 102-2735 [2] KEY-SQUARE  
6. 5P-2566 [16] BOLT (1/2-13X1.5-IN)  
7. 8T-4223 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 6V-8188 [16] NUT (1/2-13-THD)  
9. 5P-2228 [4] BOLT (1/2-13X1-IN)  
10. 205-7165 [1] COVER  
11. 205-7164 [1] COVER  
12. 8I-0145 [2] SHAFT AS-VIBRATORY  
13. 8I-0720 [4] CONNECTOR  
14. 5P-9982 [4] FITTING-GREASE  
15. 9S-1812 [4] FITTING (NIPPLE-PIPE)  
 

#KEBP02110395
 

197-5294: VIBRATORY GP

197-5294 VIBRATORY GP
S/N ABB1-UP; ACM1-UP
PART OF 197-5300, 231-4642 SCREED AR
Type 2
AN ATTACHMENT
i01638484 KEBP0211
1975294 VIBRATORY GP Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-3947 C [4] FITTING-GREASE  
2. 8I-0144 [2] SHAFT AS-VIBRATORY  
3. 8I-0720 [8] CONNECTOR  
4. 102-2690 [4] COUPLING  
5. 102-2695 [8] BEARING  
6. 102-2739 [4] KEY-SQUARE  
7. 105-1533 [4] KEY-SQUARE  
8. 386-7458 [2] SHAFT AS  
9. 196-2533 [1] COVER AS (LH)  
  1F-0750 [5] NUT-WELD (3/8-16-THD)  
  4V-0969 [3] PLATE AS  
10. 197-9741 [1] COVER AS (RH)  
  1F-0750 [5] NUT-WELD (3/8-16-THD)  
  4V-0969 [1] PLATE AS  
11. 4L-6454 [10] BOLT (3/8-16X1-IN)  
12. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 5P-1076 [64] WASHER-HARD (13.5X30X4-MM THK)  
14. 6V-8188 [32] NUT (1/2-13-THD)  
15. 8T-8919 [32] BOLT (1/2-13X1.75-IN)  
16. 4K-8864 C [10] CLIP  
17. 8T-4896 C [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
19. 5P-8167 C [8] BOLT (3/8-16X0.625-IN)  
20. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
21. 148-8320 [7] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
22. 131-6468 CI [2] HOSE AS  
23. 187-7684 CI [2] HOSE AS  
24. 148-8389 [1] ELBOW AS  
  4J-5477 [1] SEAL-O-RING  
  7X-0492 [1] ELBOW  
25. 113-4339 [2] SPACER (10.5X18X21-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP02110396
 

197-5294: VIBRATORY GP

197-5294 VIBRATORY GP
S/N ABB1-UP; ACM1-UP
PART OF 197-5300 SCREED AR
Type 1
AN ATTACHMENT
i01446328 KEBP0211
1975294 VIBRATORY GP Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 8I-0144 [2] SHAFT AS-VIBRATORY  
3. 8I-0720 [8] CONNECTOR  
4. 102-2690 [4] COUPLING  
5. 102-2695 [8] BEARING  
6. 102-2739 [4] KEY-SQUARE  
7. 105-1533 [4] KEY-SQUARE  
8. 193-1325 [2] SHAFT AS  
9. 196-2533 [1] COVER AS (LH)  
10. 197-9741 [1] COVER AS (RH)  
    (EACH COVER AS INCLUDES)
  1F-0750 [5] NUT-WELD (3/8-16-THD)  
  4V-0969 [1] PLATE AS  
11. 4L-6454 [10] BOLT (3/8-16X1-IN)  
12. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 5P-1076 [64] WASHER-HARD (13.5X30X4-MM THK)  
14. 6V-8188 [32] NUT (1/2-13-THD)  
15. 8T-8919 [32] BOLT (1/2-13X1.75-IN)  
16. 9M-8406 [6] CLIP (LOOP)  
17. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
19. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
20. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
21. 8C-6865 [7] CONNECTOR  
22. 188-4401 I [2] HOSE AS  
23. 185-1622 I [2] HOSE AS  
24. 4J-5477 [8] SEAL-O-RING  
25. 7X-0492 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP02110397
 

8I-0143: VIBRATORY GP

8I-0143 VIBRATORY GP
S/N ABB1-UP; ACM1-UP
PART OF 112-3475, 112-3476, 229-3115 SCREED AR
AN ATTACHMENT
i02942177 KEBP0211
8I0143 VIBRATORY GP Parts scheme 8I0143 VIBRATORY GP Parts scheme 8I0143 VIBRATORY GP Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0144 [2] SHAFT AS-VIBRATORY  
2. 112-1276 Y [1] SHAFT GP-DRIVE (ECCENTRIC WEIGHT)  
3. 102-2695 [8] BEARING  
4. 310-6046 C [4] COUPLER  
5. 310-6052 C [4] COUPLER  
6. 105-1533 [4] KEY-SQUARE  
7. 102-2735 [2] KEY-SQUARE  
9. 5P-2566 [32] BOLT (1/2-13X1.5-IN)  
10. 8T-4223 [36] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 6V-8188 [32] NUT (1/2-13-THD)  
12. 5P-2228 [4] BOLT (1/2-13X1-IN)  
13. 205-7165 [1] COVER  
14. 205-7164 [1] COVER  
15. 8I-0145 [2] SHAFT AS-VIBRATORY  
16. 8I-0720 [8] CONNECTOR  
17. 148-8320 [11] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6865 [1] CONNECTOR  
19. 8I-0718 I [2] HOSE AS  
20. 144-0360 I [2] HOSE AS  
21. 5P-9982 [5] FITTING-GREASE  
22. 8J-1256 [4] CLIP  
23. 6V-8185 [2] NUT (1/4-20-THD)  
24. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 7R-7906 [4] CLAMP  
26. 7V-5628 [2] PLATE  
27. 4M-5282 [4] BOLT (1/4-20X1.5-IN)  
28. 9S-1812 [1] FITTING (NIPPLE-PIPE)  
29. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
30. 8I-0967 [1] TUBE AS  
31. 8I-0968 [1] TUBE AS  
32. 8I-0969 [1] TUBE AS  
33. 148-8337 [3] CONNECTOR AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  8C-6866 [1] CONNECTOR  
34. 098-2599 [3] FITTING-GREASE  
36. 7C-4354 [1] CLIP  
38. 4D-0659 [1] BOSS  
39. 6V-8801 [1] NUT (3/8-16-THD)  
40. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 310-6051 C [4] SPIDER  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP02110398
 

104-7449: CONSOLE AR

104-7449 CONSOLE AR
S/N ABB1-UP; ACM1-UP
PART OF 168-8435, 168-8436 COMMON AR
i00475826 KEBP0211
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-7473 Y [1] CONSOLE GP-OPERATOR  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02110399
 

104-7473: CONSOLE GP-OPERATOR

104-7473 CONSOLE GP-OPERATOR
S/N ABB1-UP; ACM1-UP
PART OF 104-7449 CONSOLE AR
i00942601 KEBP0211
1047473 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-7139 Y [1] STEERING COLUMN GP  
2. 134-8545 [1] SUPPORT AS-CONSOLE  
3. 108-4708 [1] CONSOLE AS  
  7T-1099 [3] LINK  
  102-2868 [2] GRIP-HANDLE  
4. 5P-2228 [4] BOLT (1/2-13X1-IN)  
5. 6V-8188 [4] NUT (1/2-13-THD)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 126-1504 [2] PLATE AS  
8. 030-7571 [4] BOLT (3/8-16X1-IN)  
9. 6V-8801 C [17] NUT (3/8-16-THD)  
10. 8T-4896 C [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 104-1824 [1] BAR  
12. 5M-3062 [5] BOLT (3/8-16X0.75-IN)  
13. 104-3962 [1] COVER AS  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 081-8353 [2] BOLT (3/8-16X0.625-IN)(3/8-16 THD)  
15. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
16. 108-4678 [1] PLATE  
17. 166-0691 [1] BLOCK AS-MOUNTING (POSITION SENSOR)  
18. 150-6598 [1] ARM  
19. 118-5034 [2] FLASHING  
20. 8T-4138 M [2] BOLT (M6X1X20-MM)  
21. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
22. 169-5882 [2] CLAMP AS  
23. 118-5215 [2] BAR  
24. 170-3495 [4] BEARING AS  
25. 126-1505 [1] PLATE AS  
26. 7X-0346 [5] BOLT (5/8-11X2-IN)  
27. 7X-0448 [1] NUT (5/8-11-THD)  
28. 109-2776 [1] SUPPORT AS  
29. 4L-6454 [2] BOLT (3/8-16X1-IN)  
30. 109-2777 [1] SPRING-EXTENSION  
31. 169-3653 [1] SHAFT AS  
32. 9X-6270 [1] BOLT-SPECIAL  
33. 109-2237 [1] PEDAL AS  
34. 109-2778 [1] BAR  
35. 133-8106 [11] SCREW-BUTTON HEAD (1/2-13X1.5-IN)  
36. 8T-7566 [1] PIN-SPRING  
37. 4B-4274 [9] WASHER (5.5X13X1.2-MM THK)  
38. 7S-9868 [4] FITTING-GREASE  
39. 4S-6336 [1] PLUG-BUTTON  
40. 114-9949 [1] PLATE  
41. 4B-1282 [4] SCREW-MACHINE (1/4-20X0.75-IN)  
42. 113-0924 [1] LATCH  
43. 3L-2540 [4] BOLT-SOCKET HEAD (10-24X0.75-IN)  
44. 031-0249 [4] LOCKNUT (10-24-THD)(10-24 THD)  
45. 8T-9007 E SEAL (10.84CM)  
46. 6B-6683 [4] NUT (5/8-18-THD)  
47. 8T-4122 [13] WASHER-HARD (17X32X3.5-MM THK)  
48. 6V-0894 [1] SEAL-O-RING  
49. 8T-7368 M [2] SCREW-MACHINE (10-32X28.58-MM)  
50. 4B-2047 [3] NUT (10-24-THD)  
51. 214-4863 Y [1] SENSOR GP-POSITION (ROTARY)(BRAKE PEDAL)  
52. 169-1797 [1] PIN AS  
  168-8921 [1] ROD  
53. 3L-5919 [1] SPRING-GOVERNOR SHAFT  
54. 118-9584 [1] FLASHING  
55. 3B-4618 [1] PIN-COTTER  
56. 5L-5976 [1] END  
57. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
58. 118-9585 [1] BAR  
59. 2K-3673 [3] BOLT-TRUNNION (5/8-11X1.84-IN)(5/8X11X1/2IN)  
60. 134-5930 [3] SPACER (19X41X12.7-MM THK)  
61. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
62. 141-4760 [1] PLATE-COVER  
63. 1D-5118 [3] NUT-JAM (5/8-11-THD)  
64. 8T-1688 [3] SCREW-MACHINE (10-24X12.7-MM)  
65. 169-3757 [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
66. 8T-2502 [13] BOLT (3/8-16X1.125-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog AP-1055B :

VALVE GP-PUMP CONTROL
214-7732 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
196-6988 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
152-7576 VALVE GP-PUMP CONTROL
VALVE GP-PRESSURE REDUCING
168-8609 VALVE GP-PRESSURE REDUCING
VALVE GP-PRESSURE REDUCING
116-6863 VALVE GP-PRESSURE REDUCING
VALVE GP-PRESSURE REDUCING
112-4568 VALVE GP-PRESSURE REDUCING
VALVE GP-MANIFOLD
132-7429 VALVE GP-MANIFOLD
VALVE GP-FLUSHING
134-5294 VALVE GP-FLUSHING
176-3200 VALVE GP-RELIEF
VALVE GP-SOLENOID
103-3602 VALVE GP-SOLENOID
VALVE GP-SOLENOID
332-1453 VALVE GP-SOLENOID
VIBRATORY GP
110-0998 VIBRATORY GP
VIBRATORY GP
197-5294 VIBRATORY GP
VIBRATORY GP
197-5294 VIBRATORY GP
VIBRATORY GP
8I-0143 VIBRATORY GP
104-7449 CONSOLE AR

Truck sale:

Caterpillar AP-1055B, Construction
92,000 
Caterpillar AP-1055B, Construction
- Asphalt pavers
H.O. PENN MACHINERY CO., INC.
CATERPILLAR AP-1055B 2005
 
CATERPILLAR AP-1055B 2005
- ASPHALT PAVERS
PATTEN INDUSTRIES
United States
CATERPILLAR AP-1055B 1999
 
CATERPILLAR AP-1055B 1999
- ASPHALT PAVERS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo
CATERPILLAR AP-1055B 2002
 
CATERPILLAR AP-1055B 2002
- ASPHALT PAVERS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR AP 1055 B 1999
 
CATERPILLAR AP 1055 B 1999
- ASPHALT PAVERS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.