AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CS-583D Vibratory Compactor 2CZ00001-UP (MACHINE) POWERED BY 3116 Engine BASIC ENGINE Caterpillar SIS



VIBRATORY COMPACTOR CS-583D VIBRATORY COMPACTOR 2CZ
 CS-583D Vibratory Compactor 2CZ00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0213 CS-583D 2CZ   (1999)

Parts group CS-583D:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
108-5759 CAMSHAFT GP
108-5759 CAMSHAFT GP
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
CARRIER GP-SEAL
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
S/N 4TF52183-UP; 98Z29296-UP
PART OF 7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
FOR USE WITH TWO-PIECE PISTONS
CYLINDER HEAD GP
CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
S/N 98Z29296-32171
PART OF 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
S/N 4TF52183-UP; 98Z32172-38205
FIELD REPLACEMENT FOR @@@@@119-3065@@@@@, @@@@@190-9066@@@@@
CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
S/N 4TF52183-UP; 98Z32172-38205
PART OF 140-7373 CYLINDER HEAD AS, 140-7371 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
S/N 4TF52183-UP; 98Z32172-38205
PART OF 159-0305, 160-5130 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
S/N 4TF52183-UP; 98Z32172-38205
PART OF 143-0037 ENGINE AR
CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
S/N 4TF52183-UP; 98Z32172-38205
FIELD REPLACEMENT FOR @@@@@140-7371@@@@@
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
S/N 98Z29296-32171
PART OF 4P-8264 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@160-5130@@@@@
CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
S/N 98Z29296-32171
PART OF 143-0037 ENGINE AR
DAMPER GP
DAMPER & PULLEY GP
117-8272 DAMPER & PULLEY GP
117-8272 DAMPER & PULLEY GP
S/N 4TF52183-85749; 98Z29296-38205
PART OF 143-0037 ENGINE AR
DRIVE GP-PUMP
DRIVE GP-PUMP
146-6237 DRIVE GP-PUMP
146-6237 DRIVE GP-PUMP
S/N 2CZ1-UP
PART OF 136-9086 INSTALLATION AR-ENGINE
DRIVE GP-WATER PUMP
DRIVE GP-WATER PUMP
4W-5428 DRIVE GP-WATER PUMP
4W-5428 DRIVE GP-WATER PUMP
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
FLYWHEEL GP
FLYWHEEL GP
9Y-2755 FLYWHEEL GP
9Y-2755 FLYWHEEL GP
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING & 10 OR 11.5-IN OVER CENTER CLUTCH
GEAR GP
GEAR GP-FRONT
101-4540 GEAR GP-FRONT
101-4540 GEAR GP-FRONT
S/N 4TF52183-UP; 98Z29296-UP
PART OF 143-0037 ENGINE AR
GEAR GP-FRONT
101-4540 GEAR GP-FRONT
101-4540 GEAR GP-FRONT
S/N 98Z29296-38205
PART OF 143-0037 ENGINE AR
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
7W-8813 HOUSING GP-FLYWHEEL
7W-8813 HOUSING GP-FLYWHEEL
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING EQUIPPED WITH STARTING MOTOR MOUNTING FLANGE ON RH SIDE
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
HOUSING GP-FRONT
101-4539 HOUSING GP-FRONT
101-4539 HOUSING GP-FRONT
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
LIFTING GP-ENGINE
LIFTING GP-ENGINE
4W-2515 LIFTING GP-ENGINE
4W-2515 LIFTING GP-ENGINE
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE FLEXIBLE
138-7527 MOUNTING GP-ENGINE FLEXIBLE
138-7527 MOUNTING GP-ENGINE FLEXIBLE
S/N 2CZ1-UP
PART OF 136-9086 INSTALLATION AR-ENGINE
PAN GP-OIL
DRAIN GP-ENGINE OIL
136-8877 DRAIN GP-ENGINE OIL
136-8877 DRAIN GP-ENGINE OIL
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
DRAIN GP-ENGINE OIL
170-5933 DRAIN GP-ENGINE OIL
170-5933 DRAIN GP-ENGINE OIL
S/N 2CZ1-UP
PART OF 136-9086 INSTALLATION AR-ENGINE
PAN GP-OIL
115-4119 PAN GP-OIL
115-4119 PAN GP-OIL
S/N 4TF83847-UP
PART OF 143-0037 ENGINE AR
PAN GP-OIL
4P-1723 PAN GP-OIL
4P-1723 PAN GP-OIL -ENGINE
S/N 4TF52183-83846; 98Z29296-38205
PART OF 143-0037 ENGINE AR
PISTON & ROD GP
PISTON & ROD GP
107-7639 PISTON & ROD GP
107-7639 PISTON & ROD GP
S/N 4TF52183-UP; 98Z29296-UP
16.7:1 RATIO
PART OF 143-0037 ENGINE AR
PISTON & ROD GP
107-7639 PISTON & ROD GP
107-7639 PISTON & ROD GP
S/N 4TF52183-UP
16.7:1 RATIO
PART OF 143-0037 ENGINE AR
PULLEY GP
DAMPER & PULLEY GP
117-8272 DAMPER & PULLEY GP
117-8272 DAMPER & PULLEY GP
S/N 4TF52183-85749; 98Z29296-38205
PART OF 143-0037 ENGINE AR
PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
S/N 4TF52183-UP; 98Z29296-38205
PART OF 143-0037 ENGINE AR
ROCKER ARM GP
107-7722 ROCKER ARM GP
107-7722 ROCKER ARM GP
S/N 4TF52183-UP; 98Z29296-38205
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Disassembly and Assembly
Air Compressor Drive Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Air Compressor - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Disassembly and Assembly
Engine Balancer Shaft - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Disassembly and Assembly
Belt Tensioner - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Belt Tightener - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Belt Tightener - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/01/06
Disassembly and Assembly
Crankshaft Rear Seal Carrier - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
Specifications
Flexible Coupling Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Remove - If Equipped
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2002/12/23
There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/08/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Special Instruction
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Cylinder Sleeve Available For Reconditioning Cylinder Blocks {1222}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
Special Instruction
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
New Valve Cover Gasket Used {1107}
1994/01/17
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Correction to Service Magazine, SEPD0533 , "A New Inlet Valve is Released for use in 3116 and in 3126 Machine Engines with Two Valve Configuration" {1105}
2000/06/19
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07
A New Cylinder Head Gasket is Now Used {1100, 1124}
2008/12/29
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3114, 3116, and 3126 Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
A New Vibration Damper is Available {1205, 5569}
2003/12/15
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Specifications
Fan Drive
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Pump Drive
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System
Disassembly and Assembly
Pump Drive
CP-563D, CS-563D , CS-573D & CS-583D VIBRATORY COMPACTORS MA
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Disassembly and Assembly
Engine
3116 ENGINE SUPPLEMENT FOR CP-563D, CS-563D, & CS-583D VIBR
Service Magazine
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Flywheel - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Flywheel - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3114, 3116, and 3126 Engines
Disassembly and Assembly
Gear Group (Front) - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Testing and Adjusting
Flywheel Housing - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Remove the Plug from the Flywheel Housing in order to Allow the Moisture to Escape {1157}
2002/07/01
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Housing (Front) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Housing (Front) - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Front Cover - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Disassembly and Assembly
Engine Lifting Bracket - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Specifications
Alternator Mounting Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Disassembly and Assembly
Alternator
3116 ENGINE SUPPLEMENT FOR CP-563D, CS-563D, & CS-583D VIBR
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Operation and Maintenance Manual
Engine Mounts - Inspect
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Operation and Maintenance Manual
Engine Oil Level - Check
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Engine Oil Sample - Obtain
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Engine Oil and Filter - Change
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Specifications
Oil Pan Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/07/21
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
Special Instruction
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116, and 3126 Engines
Compression - Test
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Connecting Rod Bearings - Inspect
3114, 3116, and 3126 Engines
Piston Ring Groove - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
New Top Piston Rings Available {1215}
1999/03/15
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Specifications
Air Cleaner Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Alternator Mounting Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Belts - Inspect/Adjust/Replace
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Specifications
Alternators And Regulators
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Alternator Mounting Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2002/12/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Disassembly and Assembly
Alternator Belt
3116 ENGINE SUPPLEMENT FOR CP-563D, CS-563D, & CS-583D VIBR
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash and Injector Fuel Timing - Check/Adjust
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors
Special Instruction
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3114, 3116, and 3126 Engines
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Rocker Shaft and Pushrod - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
New Valve Cover Gasket Used {1107}
1994/01/17
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Correction to Service Magazine, SEPD0533 , "A New Inlet Valve is Released for use in 3116 and in 3126 Machine Engines with Two Valve Configuration" {1105}
2000/06/19
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

 
On Request 
Caterpillar CS-583D, Construction
- Single drum rollers
BERGERAT MONNOYEUR S.A.S.
France
2002 CAT CS-583D
USD $54,775 
2002 CAT CS-583D

Finning Canada
Edmonton, Alberta, Canada T5P4C3
2002 CAT CS-583D
Call 
2002 CAT CS-583D

Best Machinery Holland BV
Rotterdam, The Netherlands
2000 CAT CS-583D
USD $33,500 
2000 CAT CS-583D

Frontline Heavy Equipment
Danville, California
2002 CAT CS-583D
Call 
2002 CAT CS-583D

Best Machinery Holland BV
Rotterdam, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.