BASIC ENGINE
CYLINDER HEAD GPDAMPER GP
PAN GP-OIL
DRIVE GP-ACCESSORY
DRIVE GP-FAN
DRIVE GP-PUMP
DRIVE GP-WATER PUMP
BASIC ENGINE
CYLINDER HEAD GP#KEBP02230020
160-5130: CYLINDER HEAD GP
#KEBP02230021
4P-2844: DAMPER & PULLEY GP
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS#KEBP02230022
136-8877: DRAIN GP-ENGINE OIL
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS#KEBP02230023
108-5434: DRIVE GP-ACCESSORY
108-5434 DRIVE GP-ACCESSORY
S/N AGJ1-UP; AGL1-UP
PART OF 180-9474, 190-4165 GENERATOR GP-HYDRAULIC
AN ATTACHMENT
S/N AGJ1-UP; AGL1-UP
PART OF 180-9474, 190-4165 GENERATOR GP-HYDRAULIC
AN ATTACHMENT
#KEBP02230024
7C-0044: DRIVE GP-FAN
7C-0044 DRIVE GP-FAN
S/N 98Z31739-UP
DOES NOT INCLUDE DRIVE BELTS, DRIVE PULLEY OR FAN ADAPTER
PART OF 159-6000 ENGINE AR
FOR USE WITH INDUSTRIAL ENGINE WITH FAN DRIVE REQUIREMENTS
S/N 98Z31739-UP
DOES NOT INCLUDE DRIVE BELTS, DRIVE PULLEY OR FAN ADAPTER
PART OF 159-6000 ENGINE AR
FOR USE WITH INDUSTRIAL ENGINE WITH FAN DRIVE REQUIREMENTS
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-8365 | [1] | DRIVE GP-FAN | |
| 1A. | 5S-9062 | [1] | SPACER (35.032X50.8X15.88-MM THK) | |
| 1B. | 4W-1203 | [2] | CUP-BEARING | |
| 1C. | 4W-1204 | [2] | CONE-BEARING | |
| 1D. | 4W-2042 | [1] | SPACER (35.3X45.5X38.331-MM THK) | |
| 1E. | 6V-8004 M | [1] | BOLT (M12X1.75X120-MM) | |
| 1F. | 6V-9748 | [1] | SEAL-LIP TYPE | |
| 1G. | 7C-8366 | [1] | BRACKET AS | |
| 1H. | 7C-8369 | [1] | HUB | |
| 1J. | 7C-8370 | [1] | CAP-DUST (FAN DRIVE) | |
| 1K. | 7C-8634 | [1] | PLATE | |
| 2. | 6V-4249 M | [4] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
#KEBP02230025
161-1245: DRIVE GP-PUMP
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-9473 Y | [1] | DRIVE GP-PUMP | |
| 2. | 8W-6650 I | [1] | HOSE AS | |
| 3. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 4. | 8C-6872 | [1] | CONNECTOR | |
| 5. | 6V-8398 | [2] | SEAL-O-RING | |
| 6. | 6V-9509 | [1] | PLUG (13/16-16-THD) | |
| 7. | 9B-7237 | [8] | BOLT (3/8-16X1.25-IN) | |
| 8. | 8T-4896 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 1S-0994 | [1] | CLIP (LOOP) | |
| 10. | 3E-4915 | [1] | HUB-COUPLING | |
| 11. | 102-1733 | [1] | FLANGE-NYLON | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02230026
161-1245: DRIVE GP-PUMP
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 187-8715 CY | [1] | DRIVE GP-PUMP | |
| 2. | 8W-6650 I | [1] | HOSE AS | |
| 3. | 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | |
| 4. | 8C-6872 | [1] | CONNECTOR | |
| 5. | 6V-8398 | [2] | SEAL-O-RING | |
| 6. | 6V-9509 | [1] | PLUG (13/16-16-THD) | |
| 7. | 9B-7237 | [8] | BOLT (3/8-16X1.25-IN) | |
| 8. | 8T-4896 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 1S-0994 | [1] | CLIP (LOOP) | |
| 10. | 4D-9517 C | [1] | CLIP | |
| 11. | 102-1733 | [1] | FLANGE-NYLON | |
| 12. | 3E-4915 | [1] | HUB-COUPLING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02230027
163-9473: DRIVE GP-PUMP
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7R-9335 | [1] | HOUSING | |
| 2. | 7X-5867 | [1] | PLUG | |
| 3. | 8T-6763 | [3] | PLUG-PIPE (1/4-18-THD) | |
| 4. | 2B-0858 | [1] | PLUG-PIPE | |
| 5. | 002-6453 | [1] | ELBOW | |
| 6. | 6B-5072 | [1] | ADAPTER | |
| 7. | 7R-7874 | [1] | BREATHER | |
| 8. | 9X-6011 | [12] | SCREW-HEX SOCKET (5/8-11X1.5-IN) | |
| 9. | 5E-8878 | [2] | PLUG | |
| 10. | 081-7090 | [3] | GEAR | |
| 11. | 2D-5658 | [8] | BALL BEARING | |
| 12. | 8C-2323 | [1] | GEAR | |
| 13. | 117-1694 | [2] | ADAPTER-PUMP | |
| 14. | 1H-6227 | [2] | SEAL-O-RING | |
| 15. | 117-1693 | [1] | ADAPTER-PUMP | |
| 16. | 5F-3144 | [1] | SEAL-O-RING | |
| 17. | 078-0613 | [2] | SLEEVE | |
| 18. | 077-6606 | [1] | COUPLING | |
| 19. | 7X-5870 | [1] | COVER | |
| 20. | 077-2982 | [1] | SEAL | |
| 21. | 7X-6814 | [7] | BOLT | |
| 22. | 123-6562 | [1] | SHAFT-DRIVE | |
| 23. | 123-6563 | [1] | BEARING | |
| 24. | 7J-8611 | [1] | ELBOW-PIPE | |
| 25. | 154-2561 | [1] | NIPPLE-PIPE | |
| 26. | 154-2560 | [1] | ELBOW-PIPE | |
| 27. | 154-2562 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (OIL LEVEL) |
#KEBP02230028
187-8715: DRIVE GP-PUMP
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7R-9335 | [1] | HOUSING | |
| 2. | 7X-5867 | [1] | PLUG | |
| 3. | 8T-6763 | [3] | PLUG-PIPE (1/4-18-THD) | |
| 4. | 2B-0858 | [1] | PLUG-PIPE | |
| 5. | 002-6453 | [1] | ELBOW | |
| 6. | 6B-5072 | [1] | ADAPTER | |
| 7. | 7R-7874 | [1] | BREATHER | |
| 8. | 9X-6011 | [12] | SCREW-HEX SOCKET (5/8-11X1.5-IN) | |
| 9. | 5E-8878 | [2] | PLUG | |
| 10. | 081-7090 | [3] | GEAR | |
| 11. | 2D-5658 | [8] | BALL BEARING | |
| 12. | 8C-2323 | [1] | GEAR | |
| 13. | 117-1694 | [2] | ADAPTER-PUMP | |
| 14. | 1H-6227 | [2] | SEAL-O-RING | |
| 15. | 117-1693 | [1] | ADAPTER-PUMP | |
| 16. | 5F-3144 | [1] | SEAL-O-RING | |
| 17. | 078-0613 | [2] | SLEEVE | |
| 18. | 077-6606 | [1] | COUPLING | |
| 19. | 7X-5870 | [1] | COVER | |
| 20. | 131-2163 | [1] | SEAL | |
| 21. | 7X-6814 | [7] | BOLT | |
| 22. | 123-6562 | [1] | SHAFT-DRIVE | |
| 23. | 123-6563 | [1] | BEARING | |
| 24. | 7J-8611 | [1] | ELBOW-PIPE | |
| 25. | 154-2561 | [1] | NIPPLE-PIPE | |
| 26. | 154-2560 | [1] | ELBOW-PIPE | |
| 27. | 154-2562 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (OIL LEVEL) |
#KEBP02230029
4W-5428: DRIVE GP-WATER PUMP
Parts for your AP-900B ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 036-6775 | [1] | V-BELT (PUMP DRIVE)(WATER) | |
| 2. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM) | |
| 3. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 4. | 115-4204 | [1] | PULLEY AS-IDLER | |
| 115-4237 | [1] | PULLEY-IDLER | ||
| 4A. | 2L-8509 | [1] | RING-LOCK | |
| 4B. | 117-7114 | [1] | BEARING AS-BALL | |
| 4C. | 100-6267 | [1] | PLATE AS-IDLER | |
| 5. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 6. | 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | |
| 7. | 4F-3714 | [1] | WASHER (0.375X1.5X0.135-IN THK) | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
CYLINDER HEAD GP
Special Instruction
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Specifications
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Testing and Adjusting
Disassembly and Assembly
Inlet and Exhaust Valves - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
