AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

120-5898 CROWN GP-MANUAL PART OF 112-3475, 233-6725 SCREED AR 10-20B ASPHALT SCREED


CONTROLS
CROWN GP
SLOPER GP
MOTOR GP-POWER ADJUSTER

ASPHALT SCREED 10-20B ASPHALT SCREED AGT
 10-20B EXTEND-A-MAT Screed AGT00001-UP KEBP0230 10-20B AGT   (2000)

CONTROLS

CROWN GP
CROWN GP-MANUAL
120-5898 CROWN GP-MANUAL
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
 

#KEBP02300020
 

120-5898: CROWN GP-MANUAL

120-5898 CROWN GP-MANUAL
PART OF 112-3475, 233-6725 SCREED AR
i00555204 KEBP0230
1205898 CROWN GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0587 [1] SHAFT AS  
2. 7X-0616 [2] WASHER-HARD (28X57X6-MM THK)  
3. 6K-3632 [2] LOCKNUT (1-8-THD)  
4. 3E-4300 [2] NUT-FULL  
5. 120-5912 [2] TRUNNION  
6. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
7. 1A-0075 [4] BOLT (3/4-16X1.75-IN)  
8. 8I-0903 [2] BLOCK-BEARING  
9. 3P-8680 [4] CUP-BEARING  
10. 3P-8681 [4] CONE-BEARING  
11. 9S-4185 [2] PLUG (3/4-16-THD)  
12. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
13. 102-2701 [2] BEARING  
14. 7X-0264 [2] BOLT (1/4-20X2.5-IN)  
15. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 6V-8185 [2] NUT (1/4-20-THD)  
17. 119-0750 [2] SPROCKET (12-TEETH)  
18. 8I-0592 [1] SCALE-CROWN CONTROL  
19. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
20. 107-2531 [1] CHAIN AS  
21. 102-2687 [1] LINK-CONNECTING  
22. 5D-8412 [2] SCREW-ROUND HEAD (8-32X0.5-IN)  
23. 102-2738 [1] POINTER  
24. 4L-6454 [4] BOLT (3/8-16X1-IN)  
25. 6V-8801 [1] NUT (3/8-16-THD)  
26. 8I-0588 [1] PLATE-MOUNTING  
27. 8I-0589 [1] BRACKET  
28. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
29. 8I-0586 [1] BLOCK-TAKEUP  
30. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
31. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-6871 [1] BOLT (5/8-11X2.5-IN)  
33. 1D-5118 [1] NUT-JAM (5/8-11-THD)  
34. 107-2532 [1] SHAFT AS  
35. 7X-0537 [4] WASHER-HARD (40.5X67X6-MM THK)  
36. 120-5899 [2] BAR  
37. 005-8639 [4] BEARING-ALIGNING  
38. 120-5900 [2] YOKE AS  
39. 120-5903 [4] SPACER  
40. 053-2809 [4] BOLT-SOCKET HEAD  
41. 3B-8485 [2] ELBOW  
42. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#KEBP02300021
 

8I-0734: CROWN GP-MANUAL

8I-0734 CROWN GP-MANUAL
AN ATTACHMENT
i00424264 KEBP0230
8I0734 CROWN GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2728 [1] SHAFT AS-ADJUSTMENT  
2. 102-2714 [1] HANDLE  
3. 8T-7566 [2] PIN-SPRING  
4. 8I-0260 [1] WHEEL AS  
5. 135-8177 [1] LOCKOUT  
6. 8T-8908 [1] BOLT (1/4-20X1-IN)  
7. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
8. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#KEBP02300022
 

112-3472: CROWN GP-POWER

112-3472 CROWN GP-POWER
Type 1
AN ATTACHMENT
i01091701 KEBP0230
1123472 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3729 CY [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0746 [1] SUPPORT AS-MOTOR  
5. 8T-8920 [4] BOLT (1/2-13X3.25-IN)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6V-8188 [4] NUT (1/2-13-THD)  
8. 8I-0747 [1] SHAFT AS-ADJUSTMENT  
  8I-0740 [1] COUPLING GP  
9. 8I-0280 [1] KEEPER  
10. 8T-7566 [1] PIN-SPRING  
11. 7N-8008 [1] SWITCH AS-TOGGLE (CROWN)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
12. 114-2384 [1] WIRE AS  
13. 114-2383 [1] WIRE AS  
14. 105-6610 [2] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP02300023
 

112-3472: CROWN GP-POWER

112-3472 CROWN GP-POWER
Type 2
AN ATTACHMENT
i02395182 KEBP0230
1123472 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-2006 CY [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0746 [1] SUPPORT AS-MOTOR  
5. 8T-8920 [4] BOLT (1/2-13X3.25-IN)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6V-8188 [4] NUT (1/2-13-THD)  
8. 8I-0747 [1] SHAFT AS-ADJUSTMENT  
  8I-0740 [1] COUPLING GP  
9. 8I-0280 [1] KEEPER  
10. 253-8868 C [1] PIN-SPRING  
11. 7N-8008 [1] SWITCH AS-TOGGLE (CROWN)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
12. 114-2384 [1] WIRE AS  
13. 114-2383 [1] WIRE AS  
14. 105-6610 [2] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP02300024
 

102-2699: JACK GP-SLOPER

102-2699 JACK GP-SLOPER
PART OF 8I-0214 SLOPER GP-MANUAL
i00465644 KEBP0230
1022699 JACK GP-SLOPER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 143-3031 [1] PIPE  
3. 143-3032 [1] SCREW AS-LIFTING  
4. 107-0246 [1] GEAR-WORM  
5. 107-2064 [2] BEARING-THRUST  
6. 4M-5281 [8] BOLT (1/4-20X0.75-IN)  
7. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 4S-7756 [2] SEAL-LIP TYPE  
9. 6D-3852 [2] BALL BEARING  
10. 107-0249 [1] GUIDE-BUSHING  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 111-4249 [1] WORM  
13. 196-5244 [1] CAP  
 

#KEBP02300025
 

165-3728: MOTOR GP-POWER ADJUSTER

165-3728 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3470 SLOPER GP-POWER
Type 1
AN ATTACHMENT
i01159590 KEBP0230
1653728 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6592 [1] MOTOR AS  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 171-3715 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 123-3683 [2] BUSHING-BRONZE  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 107-2074 [1] LIMITER-TORQUE  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 9X-1813 E SLEEVE (23-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP02300026
 

165-3728: MOTOR GP-POWER ADJUSTER

165-3728 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3470 SLOPER GP-POWER
Type 2
AN ATTACHMENT
i02198448 KEBP0230
1653728 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 171-3715 [1] SHAFT-IDLER  
8. 1L-0834 B [1] BEARING AS-NEEDLE (1/2IN SHAFT)  
9. 123-3683 [1] BUSHING-BRONZE  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7899 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 [1] RACE-THRUST BEARING  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP02300027
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
Type 1
AN ATTACHMENT
i01159640 KEBP0230
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6592 [1] MOTOR AS  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 171-3714 [1] LIMITER-TORQUE  
14. 7M-7193 [1] RACE-THRUST BEARING  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 9X-1813 E SLEEVE (23-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP02300028
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
Type 2
AN ATTACHMENT
i02198331 KEBP0230
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7897 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 B [1] RACE-THRUST BEARING (1/2IN SHAFT)  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP02300029
 

277-2006: MOTOR GP-POWER ADJUSTER

277-2006 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 112-3471 ADJUSTER GP-HEIGHT, 112-3472 CROWN GP-POWER
AN ATTACHMENT
i02453264 KEBP0230
2772006 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 272-7281 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, TORQUE LIMITER, HOUSING COVER & REAR HOUSING)
20. 311-8715 J [1] WASHER (5X11X1-MM THK)  
21. 311-8716 J [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 J [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 J [1] BUSHING-BRONZE  
24. 6L-4082 J [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Crown Control
10-20B Extend-A-Mat© Screed
Crown Control - Lubricate
10-20B Extend-A-Mat© Screed
Special Instruction
Procedure To Install the New Shaft Assemblies on the Screeds for the Large Asphalt Pavers{5639, 6647}
Procedure To Install the New Shaft Assemblies on the Screeds for the Large Asphalt Pavers{5639, 6647}
Specifications
Crown
10-20B Extend-A-Mat© Screed
Service Magazine
A New Shaft Assembly for Crown Control is Now Used on Screeds for Large Asphalt Pavers {5639, 6647}
2006/08/07

Caterpillar Parts SIS Catalog 10-20B :

CONTROL GP-THICKNESS
8I-0340 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0339 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0338 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
8I-0337 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7160 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7158 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
222-7157 CONTROL GP-THICKNESS
ADJUSTER GP-HEIGHT
8I-0732 ADJUSTER GP-HEIGHT
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP-POWER
112-3472 CROWN GP-POWER
CROWN GP-POWER
112-3472 CROWN GP-POWER
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.