AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

169-2615 SCREED AR-FIXED 10B ASPHALT SCREED


MACHINE ARRANGEMENT
SCREED AR
FUEL SYSTEM
FUEL GP-SCREED
LINES GP-FUEL
CONTROLS
CONTROL GP-THICKNESS
CROWN GP

ASPHALT SCREED 10B ASPHALT SCREED BKB
 10B PAVEMASTER Screed BKB00001-UP KEBP0231 10B BKB   (2000)

MACHINE ARRANGEMENT

SCREED AR
169-2615 SCREED AR-FIXED
 

#KEBP02310001
 

169-2615: SCREED AR-FIXED

169-2615 SCREED AR-FIXED
i01555611 KEBP0231
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  134-1722 Y [1] ARM GP-DROP  
  117-5240 Y [1] BURNER GP  
  110-1531 Y [1] CROWN GP  
  205-7171 Y [1] DEFLECTOR GP  
  110-1535 Y [1] FINISH GP  
  133-7369 Y [1] FRAME GP-SCREED  
    S/N BKB1-136
  205-7178 Y [1] FRAME GP-SCREED  
    S/N BKB137-UP
  110-1550 Y [1] LINES GP-BURNER  
  116-6835 Y [1] LINES GP-VIBRATORY  
  110-0996 Y [1] PLATE GP-SCREED  
  110-1528 Y [1] PLATFORM GP  
  110-0998 Y [1] VIBRATORY GP  
  188-0918 Y [1] WIRING GP-SCREED  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02310002
 

117-5240: BURNER GP

117-5240 BURNER GP
S/N BKB1-136
PART OF 169-2615 SCREED AR-FIXED
i00750261 KEBP0231
1175240 BURNER GP Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0156 [2] CHAMBER AS-LOWER BURNER  
2. 8T-4835 [8] BOLT (1/2-13X2-IN)  
3. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 145-8985 C [2] CHAMBER AS  
5. 141-9272 C [2] PLATE-COVER  
6. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
7. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
8. 8I-0997 [2] CONNECTOR AS  
9. 8I-0998 [2] BRACKET-MOUNTING  
10. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [4] NUT (1/2-13-THD)  
12. 8M-6802 [8] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [8] NUT (1/4-20-THD)  
15. 109-0334 [2] MOTOR GP-BURNER BLOWER (24-VOLT)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 BE SLEEVE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 102-2697 [2] WHEEL-BLOWER  
17. 102-2698 [2] HOUSING-BLOWER  
18. 045-4065 [8] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 C [12] LOCKWASHER  
20. 187-9760 [2] PLATE  
21. 030-9612 C [8] SCREW-FORMING (10-24X0.5-IN)  
22. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
23. 191-5983 [2] CONE AS  
    (EACH INCLUDES)
  9X-6259 [1] SCREW-MACHINE (6-32X0.375-IN)  
  [1] LOCKNUT  
24. 187-9608 [2] NOZZLE  
25. 102-2725 [2] ADAPTER  
26. 111-8140 [2] VALVE-CHECK  
27. 8I-0163 [2] INSULATION  
28. 191-1036 [2] PLUG  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#KEBP02310003
 

117-5240: BURNER GP

117-5240 BURNER GP
S/N BKB137-UP
PART OF 169-2615 SCREED AR-FIXED
i01623230 KEBP0231
1175240 BURNER GP Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0156 [2] CHAMBER AS-LOWER BURNER  
2. 8T-4835 [8] BOLT (1/2-13X2-IN)  
3. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 145-8985 [2] CHAMBER AS  
5. 141-9272 [2] PLATE-COVER  
6. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
7. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
8. 8I-0997 [2] CONNECTOR AS  
9. 8I-0998 [2] BRACKET-MOUNTING  
10. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [4] NUT (1/2-13-THD)  
12. 8M-6802 [8] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [8] NUT (1/4-20-THD)  
15. 206-6749 C [2] MOTOR GP-ELECTRIC (24-VOLT)  
16. 206-6728 C [2] WHEEL-BLOWER  
17. 102-2698 [2] HOUSING-BLOWER  
18. 6V-5764 C [8] SCREW-MACHINE (10-32X0.625-IN)  
19. 9F-8125 [12] LOCKWASHER  
20. 187-9760 [2] PLATE  
21. 030-9612 [8] SCREW-FORMING (10-24X0.5-IN)  
22. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
23. 191-5983 [2] CONE AS  
    (EACH INCLUDES)
  9X-6259 [1] SCREW-MACHINE (6-32X0.375-IN)  
  [1] LOCKNUT  
24. 187-9608 [2] NOZZLE  
25. 102-2725 [2] ADAPTER  
26. 111-8140 [2] VALVE-CHECK  
27. 8I-0163 [2] INSULATION  
28. 191-1036 [2] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP02310004
 

110-1550: LINES GP-BURNER

110-1550 LINES GP-BURNER
PART OF 169-2615 SCREED AR-FIXED
i00494497 KEBP0231
1101550 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8397 [11] SEAL-O-RING  
2. 116-8208 I [1] HOSE AS  
3. 6V-8634 [1] CONNECTOR  
4. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
5. 5R-6301 [1] PLUG-DUST  
6. 7X-0820 [1] TEE  
7. 6V-9168 [1] NUT (11/16-16-THD)  
8. 116-8686 I [1] HOSE AS  
9. 116-8687 I [1] HOSE AS  
10. 5P-4653 [2] CONNECTOR  
11. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
12. 5P-8998 [4] FITTING  
13. 7B-0192 [2] CONNECTOR  
14. 8I-0400 [2] ADAPTER  
15. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
16. 5R-6302 [2] CAP-DUST  
17. 5P-6944 [2] ADAPTER  
18. 5P-4317 [2] CONNECTOR  
19. 3J-1907 [2] SEAL-O-RING  
20. 129-3078 [2] VALVE AS-SHUTOFF  
21. 8C-6868 [4] CONNECTOR  
22. 8I-0709 I [2] HOSE AS  
23. 003-8747 [2] ELBOW  
24. 077-8184 [3] CLAMP  
25. 8C-8988 [1] ELBOW  
26. 5M-6213 [2] PLUG-PIPE  
27. 3S-2093 [1] STRAP-CABLE  
28. 3K-0360 [3] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP02310005
 

134-1725: CONTROL GP-THICKNESS

134-1725 CONTROL GP-THICKNESS
CLOCKWISE
AN ATTACHMENT
i00554300 KEBP0231
1341725 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0911 [2] KNOB  
2. 1D-6306 [4] NUT (1-8-THD)  
3. 8I-0352 [2] HANDLE AS  
4. 1J-8136 [6] PIN-SPRING  
5. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
6. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
7. 4M-5282 [2] BOLT (1/4-20X1.5-IN)  
8. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
9. 7X-8698 [2] UNIVERSAL JOINT GP  
    (EACH INCLUDES)
  3B-8485 [1] ELBOW  
  177-6969 [1] KIT-BEARING  
10. 134-2207 [2] ROD  
11. 134-2208 [2] SLEEVE AS-ADJUSTABLE  
12. 134-9520 [2] BOLT-SPECIAL  
13. 8T-5361 [6] WASHER-HARD (28X49X5-MM THK)  
14. 134-1720 [2] SHAFT  
15. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
16. 7X-8686 [2] BEARING  
17. 3P-8680 [4] CUP-BEARING  
18. 3P-8681 [4] CONE-BEARING  
19. 8I-0904 [2] SCALE-THICKNESS  
20. 8I-0358 [2] POINTER  
21. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
24. 135-8177 [2] LOCKOUT  
25. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
26. 6V-8182 [2] NUT (3/4-10-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP02310006
 

134-1726: CONTROL GP-THICKNESS

134-1726 CONTROL GP-THICKNESS
COUNTERCLOCKWISE
AN ATTACHMENT
i00508261 KEBP0231
1341726 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0911 [2] KNOB  
2. 1D-6306 [4] NUT (1-8-THD)  
3. 8I-0352 [2] HANDLE AS  
4. 1J-8136 [6] PIN-SPRING  
5. 8I-0910 [2] FILM-INSTRUCTION (MAT THICKNESS, CCW TO INCREASE)  
6. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
7. 4M-5282 [2] BOLT (1/4-20X1.5-IN)  
8. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
9. 7X-8698 [2] UNIVERSAL JOINT GP  
    (EACH INCLUDES)
  3B-8485 [1] ELBOW  
  177-6969 [1] KIT-BEARING  
10. 134-2320 [2] ROD-THREADED  
11. 134-2323 [2] SLEEVE AS-ADJUSTMENT  
12. 134-9520 [2] BOLT-SPECIAL  
13. 8T-5361 [6] WASHER-HARD (28X49X5-MM THK)  
14. 134-1720 [2] SHAFT  
15. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
16. 7X-8686 [2] BEARING  
17. 3P-8680 [4] CUP-BEARING  
18. 3P-8681 [4] CONE-BEARING  
19. 8I-0904 [2] SCALE-THICKNESS  
20. 8I-0358 [2] POINTER  
21. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
24. 135-8177 [2] LOCKOUT  
25. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
26. 6V-8182 [2] NUT (3/4-10-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP02310007
 

134-1727: CONTROL GP-THICKNESS

134-1727 CONTROL GP-THICKNESS
CLOCKWISE ACME
AN ATTACHMENT
i00508283 KEBP0231
1341727 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0911 [2] KNOB  
2. 1D-6306 [4] NUT (1-8-THD)  
3. 8I-0352 [2] HANDLE AS  
4. 1J-8136 [6] PIN-SPRING  
5. 8I-0909 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
6. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
7. 4M-5282 [2] BOLT (1/4-20X1.5-IN)  
8. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
9. 7X-8698 [2] UNIVERSAL JOINT GP  
    (EACH INCLUDES)
  3B-8485 [1] ELBOW  
  177-6969 [1] KIT-BEARING  
10. 134-2321 [2] ROD-THREADED (1-5-ACME THD, LH)  
11. 134-2324 [2] SLEEVE AS-ADJUSTMENT  
12. 134-9520 [2] BOLT-SPECIAL  
13. 8T-5361 [6] WASHER-HARD (28X49X5-MM THK)  
14. 134-1720 [2] SHAFT  
15. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
16. 7X-8686 [2] BEARING  
17. 3P-8680 [4] CUP-BEARING  
18. 3P-8681 [4] CONE-BEARING  
19. 8I-0904 [2] SCALE-THICKNESS  
20. 8I-0358 [2] POINTER  
21. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
24. 135-8177 [2] LOCKOUT  
25. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
26. 6V-8182 [2] NUT (3/4-10-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP02310008
 

134-1728: CONTROL GP-THICKNESS

134-1728 CONTROL GP-THICKNESS
COUNTERCLOCKWISE ACME
AN ATTACHMENT
i00508285 KEBP0231
1341728 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0911 [2] KNOB  
2. 1D-6306 [4] NUT (1-8-THD)  
3. 8I-0352 [2] HANDLE AS  
4. 1J-8136 [6] PIN-SPRING  
5. 8I-0910 [2] FILM-INSTRUCTION (MAT THICKNESS, CCW TO INCREASE)  
6. 3F-5535 [2] SCREW-DRIVE (NO 10X0.375-IN)  
7. 4M-5282 [2] BOLT (1/4-20X1.5-IN)  
8. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
9. 7X-8698 [2] UNIVERSAL JOINT GP  
    (EACH INCLUDES)
  3B-8485 [1] ELBOW  
  177-6969 [1] KIT-BEARING  
10. 134-2322 [2] ROD-THREADED (1-5-ACME THD)  
11. 134-2325 [2] SLEEVE AS-ADJUSTMENT  
12. 134-9520 [2] BOLT-SPECIAL  
13. 8T-5361 [6] WASHER-HARD (28X49X5-MM THK)  
14. 134-1720 [2] SHAFT  
15. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
16. 7X-8686 [2] BEARING  
17. 3P-8680 [4] CUP-BEARING  
18. 3P-8681 [4] CONE-BEARING  
19. 8I-0904 [2] SCALE-THICKNESS  
20. 8I-0358 [2] POINTER  
21. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 3B-8488 [4] FITTING-GREASE (1/8-27 PTF)  
24. 135-8177 [2] LOCKOUT  
25. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
26. 6V-8182 [2] NUT (3/4-10-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP02310009
 

110-1531: CROWN GP

110-1531 CROWN GP
S/N BKB1-136
PART OF 169-2615 SCREED AR-FIXED
i00494439 KEBP0231
1101531 CROWN GP Parts scheme
  For full view, you need register

Parts for your 10B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0587 [1] SHAFT AS  
2. 7X-0616 [2] WASHER-HARD (28X57X6-MM THK)  
3. 6K-3632 [2] LOCKNUT (1-8-THD)  
4. 3E-4300 [2] NUT-FULL  
5. 120-5912 [2] TRUNNION  
6. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
7. 1A-0075 [4] BOLT (3/4-16X1.75-IN)  
8. 8I-0903 [2] BLOCK-BEARING  
9. 3P-8680 [4] CUP-BEARING  
10. 3P-8681 [4] CONE-BEARING  
11. 9S-4185 [2] PLUG (3/4-16-THD)  
12. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
13. 102-2701 [2] BEARING  
14. 7X-0264 [2] BOLT (1/4-20X2.5-IN)  
15. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 6V-8185 [2] NUT (1/4-20-THD)  
17. 119-0750 [2] SPROCKET (12-TEETH)  
18. 120-5899 [2] BAR  
19. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
20. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
21. 110-9239 [1] CHAIN AS  
  102-2687 [1] LINK-CONNECTING  
22. 8I-0592 [1] SCALE-CROWN CONTROL  
23. 5D-8412 [2] SCREW-ROUND HEAD (8-32X0.5-IN)  
24. 102-2738 [1] POINTER  
25. 4L-6454 [1] BOLT (3/8-16X1-IN)  
26. 6V-8801 [1] NUT (3/8-16-THD)  
27. 8I-0588 [1] PLATE-MOUNTING  
28. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
29. 8I-0586 [1] BLOCK-TAKEUP  
30. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
31. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-6871 [1] BOLT (5/8-11X2.5-IN)  
33. 1D-5118 [1] NUT-JAM (5/8-11-THD)  
34. 107-2532 [1] SHAFT AS  
35. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
36. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
37. 005-8639 [4] BEARING-ALIGNING  
38. 120-5900 [2] YOKE AS  
39. 120-5903 [4] SPACER  
40. 053-2809 [4] BOLT-SOCKET HEAD  
41. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
42. 6V-8188 [1] NUT (1/2-13-THD)  
43. 123-4886 [1] COVER AS  
 

Information:

Systems Operation
General Information
10B Pavemaster Screed
Screed Hydraulic System
10B Pavemaster Screed
Testing and Adjusting
Machine Preparation for Troubleshooting
10B Pavemaster Screed
Visual Inspection
10B Pavemaster Screed

Caterpillar Parts SIS Catalog 10B :

BURNER GP
117-5240 BURNER GP
BURNER GP
117-5240 BURNER GP
LINES GP-BURNER
110-1550 LINES GP-BURNER
CONTROL GP-THICKNESS
134-1725 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
134-1726 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
134-1727 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
134-1728 CONTROL GP-THICKNESS
CROWN GP
110-1531 CROWN GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.