BASIC ENGINE
PISTON & ROD GPCYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
PULLEY GP
VALVE MECHANISM GP
LUBRICATION SYSTEM
PUMP GP-ENGINE OILVALVE GP-FLUID SAMPLING
COOLING SYSTEM
LINES GP-WATERBASIC ENGINE
PISTON & ROD GP#KEBP02330040
198-0992: PISTON & ROD GP
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 152-1390 | [6] | PISTON AS | |
| (EACH INCLUDES) | ||||
| 1A. | 124-3536 | [2] | RING-RETAINING | |
| 2. | 138-2073 | [6] | KIT-PISTON RING | |
| 3. | 225-5454 BCJ | [6] | ROD AS-CONNECTING (GRADE H) | |
| -OR- | ||||
| 225-5441 BCJ | [6] | ROD AS-CONNECTING (GRADE L) | ||
| (EACH ROD AS INCLUDES) | ||||
| 4. | 225-5439 | [2] | BOLT-SPECIAL | |
| 5. | 225-5438 | [1] | BUSHING | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | ENSURE THAT THE CORRECT ROD LENGTH IS FITTED. | |||
#KEBP02330041
147-5524: PLUG GP-CYLINDER BLOCK
147-5524 PLUG GP-CYLINDER BLOCK
S/N 8XJ1-UP
PART OF 163-9275 ENGINE AR-PRIMARY
S/N 8XJ1-UP
PART OF 163-9275 ENGINE AR-PRIMARY
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 069-1124 | [2] | PLUG |
#KEBP02330042
141-8614: PLUG GP-CYLINDER HEAD
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02330043
163-0264: PLUG GP-ENGINE
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2B-0858 | [2] | PLUG-PIPE |
#KEBP02330044
147-5488: PULLEY GP-CRANKSHAFT
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 243-2249 | [1] | DAMPER | |
| 2. | 6I-4714 | [1] | SPACER | |
| 3. | 7W-4632 | [1] | SET-TAPERED RING | |
| 4. | 7W-4635 | [1] | BLOCK-THRUST | |
| 5. | 7D-8048 | [1] | SEAL-O-RING | |
| 6. | 7W-4634 | [3] | BOLT (7/16-20X1.5-IN) | |
| 7. | 6I-4716 | [1] | KEY | |
| 8. | 102-9941 M | [8] | BOLT (M12X1.75X25-MM) | |
| 9. | 107-2554 | [1] | PULLEY | |
| M | METRIC PART | |||
#KEBP02330045
146-8956: ROCKER ARM GP
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-1206 | [6] | BRACKET-SHAFT | |
| 2. | 6I-3717 | [1] | BOLT (10X0.5-IN) | |
| 3. | 6I-3718 | [1] | CONNECTION-FEED | |
| 4. | 6V-8183 | [12] | NUT-FULL (3/8-24-THD) | |
| 5. | 195-7004 B | [2] | SHIM | |
| 6. | 006-8606 | [2] | RING-RETAINING | |
| 7. | 067-6087 | [4] | SPRING-SHAFT | |
| 8. | 067-6088 | [2] | SPRING-SHAFT | |
| 9. | 185-1546 | [8] | SCREW | |
| 10. | 138-2054 | [2] | WASHER | |
| 11. | 209-0091 | [6] | LEVER AS (LH)(EXHAUST) | |
| (EACH INCLUDES) | ||||
| 12. | 209-0093 | [1] | BUSHING | |
| 13. | 209-0092 | [6] | LEVER AS (RH)(INTAKE) | |
| (EACH INCLUDES) | ||||
| 14. | 209-0093 | [1] | BUSHING | |
| 15. | 146-8957 | [1] | SHAFT AS | |
| 16. | 067-6083 | [2] | PLUG-SHAFT END | |
| 17. | 129-3493 | [1] | FERRULE | |
| B | USE AS REQUIRED | |||
#KEBP02330046
198-0990: VALVE MECHANISM GP
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02330047
198-0987: PUMP GP-ENGINE OIL
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5C-1796 | [1] | GASKET | |
| 2. | 6I-0260 M | [6] | BOLT (M8X1.25X25-MM) | |
| 3. | 6I-0291 M | [1] | NUT (M8X1.25-THD) | |
| 4. | 6I-4374 M | [2] | BOLT (M8X1.25X60-MM) | |
| 5. | 067-6933 | [1] | GASKET | |
| 6. | 100-3717 | [1] | PUMP AS-ENGINE OIL | |
| 7. | 106-8916 M | [2] | BOLT (M6X16-MM) | |
| 8. | 183-6318 | [1] | TUBE AS | |
| 189-5601 | [1] | SEAL-O-RING | ||
| 9. | 134-4139 | [1] | STUD | |
| 10. | 112-7702 | [1] | HOUSING AS | |
| 10A. | 6I-0787 | [1] | RING-RETAINING | |
| 10B. | 7W-4648 | [1] | SEAT-SPRING | |
| 10C. | 7W-4650 | [1] | SPRING | |
| 10D. | 7W-4782 | [1] | PLUNGER | |
| 11. | 124-3815 M | [1] | BOLT (M8X1.25X16-MM) | |
| 12. | 133-6105 | [1] | TUBE AS | |
| 13. | 112-7704 M | [2] | BOLT (M6X1X30-MM) | |
| M | METRIC PART | |||
#KEBP02330048
140-8911: VALVE GP-FLUID SAMPLING
140-8911 VALVE GP-FLUID SAMPLING
S/N AEF1-UP; AFL1-UP
PART OF 184-6538 INSTALLATION AR-ENGINE
S/N AEF1-UP; AFL1-UP
PART OF 184-6538 INSTALLATION AR-ENGINE
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02330049
179-7074: CONNECTION GP-WATER
Parts for your CS-663E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-4374 M | [2] | BOLT (M8X1.25X60-MM) | |
| 3. | 216-9743 | [1] | CONNECTION AS | |
| 4. | 140-7515 | [1] | SEAL-O-RING (REGULATOR) | |
| 5. | 141-6188 | [1] | SEAL (HOUSING, REGULATOR) | |
| 6. | 162-0236 | [1] | RING (WATER TEMPERATURE REGULATOR) | |
| 7. | 162-0237 | [1] | PLUG | |
| 8. | 216-9737 | [1] | REGULATOR-WATER TEMPERATURE | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
PISTON & ROD GP
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Disassembly and Assembly
Service Magazine


