AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

199-6011 WIRING GP-CONSOLE S/N AWG1-UP PART OF 199-6012 ELECTRICAL AR RM-250C RECLAIMER MIXER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
TRANSMISSION GP
DRIVE GP
TRANSMISSION GP
WHEEL GP
HYDRAULIC AR-PROPEL

RECLAIMER MIXER RM-250C RECLAIMER MIXER AWG
 RM-250C Reclaimer Mixer AWG00001-UP (MACHINE) POWERED BY 3406C Engine KEBP0236 RM-250C AWG   (2000)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
BATTERY & WIRING GP
125-8743 BATTERY & WIRING GP
WIRING GP-CONSOLE
199-6011 WIRING GP-CONSOLE
WIRING GP-FRONT
125-8746 WIRING GP-FRONT
WIRING GP-REAR
125-9070 WIRING GP-REAR
WIRING GP-REAR DRIVE
139-1174 WIRING GP-REAR DRIVE
 

#KEBP02360160
 

199-6011: WIRING GP-CONSOLE

199-6011 WIRING GP-CONSOLE
S/N AWG1-UP
PART OF 199-6012 ELECTRICAL AR
i01437916 KEBP0236
1996011 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-9090 [1] S-HOOK  
2. 2N-3478 [2] SCREW-MACHINE (10-24X0.375-IN)  
3. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
4. 3T-2357 [1] SWITCH GP-PUSH BUTTON (HORN)(HORN)  
  2H-3922 [1] LOCKWASHER  
  3B-4501 [1] LOCKWASHER  
  5L-7200 [1] SCREW (8-32X0.375-IN)  
  6V-8363 [2] SCREW (10-32X0.312-IN)  
  6V-8370 [1] NUT-HEX (3/4-32-THD)  
  7T-9515 [1] KNOB-HORN  
  8F-1434 [2] LOCKWASHER  
  9X-0199 [1] BOOT-SWITCH  
5. 3T-4405 [1] SWITCH GP-TOGGLE (ROTOR MAN/AUTO)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
6. 4D-1836 [1] SWITCH-TOGGLE (PROPEL TRANS HI/LOW)  
7. 4V-6981 [2] SCREW-BUTTON HEAD (1/4-20X0.75-IN)  
8. 1S-9593 [30] STRAP-CABLE  
9. 6D-2379 [1] INDICATOR-TEMPERATURE  
  3L-8187 [3] LOCKWASHER  
  4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
  6V-3507 [1] SEAL-RECTANGULAR  
  6V-8368 [3] NUT (6-32-THD)  
  6V-8377 [2] NUT (8-32-THD)  
  9B-7233 [2] LOCKWASHER  
10. 6D-5801 [9] LOCKNUT (8-32-THD)  
11. 6G-4195 [1] SWITCH AS-LIMIT (ROTOR TRANS SHIFT)  
  3L-8187 [3] LOCKWASHER  
  6V-8373 [3] SCREW-MACHINE (6-32X0.187-IN)  
12. 6R-2475 Y [1] CONTROL GP-PROPEL  
13. 6R-2730 [1] SWITCH AS (ROTOR TRANS HIGH/LOW)  
  3L-8187 [12] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [12] SCREW-MACHINE (6-32X0.25-IN)  
14. 6R-3291 [1] CAP-SWITCH  
15. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
16. 7D-6922 [2] LOCKNUT (6-32-THD)  
17. 7N-8008 [1] SWITCH AS-TOGGLE (ROTOR RAISE/LOWER)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
18. 7W-0780 [1] GAUGE AS-ENGINE OIL PRESSURE  
  3L-8187 [3] LOCKWASHER  
  4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
  6V-3507 [1] SEAL-RECTANGULAR  
  6V-8368 [3] NUT (6-32-THD)  
  6V-8377 [2] NUT (8-32-THD)  
  9B-7233 [2] LOCKWASHER  
19. 9D-3127 [4] BASE AS-INDICATOR LIGHT  
  6V-8367 [1] LOCKWASHER  
  6V-8382 [1] NUT-HEX (11/16-27-THD)  
20. 9G-4360 [1] CAP-CONNECTOR  
21. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
22. 9N-7980 [1] CONTROLLER GP  
  118-8479 [1] POTENTIOMETER  
23. 197-7348 [1] TACHOMETER GP  
  6V-8377 [2] NUT (8-32-THD)  
  9B-7233 [2] LOCKWASHER  
24. 087-0812 [4] LENS-CLEAR  
25. 105-1457 Y [1] VOLTMETER GP (24-VOLT)  
26. 116-0118 [1] CLIP  
27. 116-5270 [3] LAMP (24-VOLT)  
28. 116-5271 [2] LAMP (24-VOLT, YELLOW)  
29. 116-5274 [1] KNOB (PARKING BRAKE)  
30. 116-5275 [1] SWITCH GP-PUSH BUTTON (OPERATOR)(OPERATOR)  
31. 116-6565 [1] BLOCK AS (LIGHT)  
32. 180-3592 [1] BLOCK-CONTACT  
33. 199-6014 Y [1] PANEL GP-CIRCUIT BREAKER  
34. 116-4684 [1] GAUGE GP-FUEL LEVEL (24-VOLT)  
  3L-8187 [3] LOCKWASHER  
  4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
  6V-3507 [1] SEAL-RECTANGULAR  
  6V-8368 [3] NUT (6-32-THD)  
  6V-8377 [2] NUT (8-32-THD)  
  9B-7233 [2] LOCKWASHER  
35. 2N-3477 [2] SCREW-MACHINE (6-32X1.25-IN)  
36. 4B-4863 [11] WASHER (4.7X11X1.2-MM THK)  
37. 4B-5324 [2] WASHER (3.9X9.6X1.2-MM THK)  
38. 5P-8392 [4] WASHER (3.1X6.3X0.8-MM THK)  
39. 6V-2480 [4] SCREW (4-40X0.5-IN)  
40. 7K-1181 [3] STRAP-CABLE  
41. 7S-1197 [1] SCREW-MACHINE (8-32X0.5-IN)  
42. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9N-7446 [4] LOCKNUT (4-40-THD)  
45. 9X-0941 [1] LOCKNUT (1/2-13-THD)  
46. 9X-8486 [8] SCREW-MACHINE (8-32X0.75-IN)  
47. 1G-9089 [1] CHAIN  
48. 206-4591 [1] HARNESS AS  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  7T-1875 [4] RECEPTACLE AS  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  8T-8729 [46] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  3T-0204 [1] RECEPTACLE AS-CONNECTOR (20-PIN)  
  7G-7917 [6] PLUG-SEAL  
  7T-6365 [1] HOUSING-RECEPTACLE  
  8T-8737 [34] PLUG-SEAL  
  9X-0145 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-4813 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  100-5805 [1] CAP-RECEPTACLE (3-PIN)  
49. 3S-2093 [10] STRAP-CABLE  
50. 8L-8413 [15] STRAP-CABLE (WHITE)  
   
  5P-8500 F [2] KEY  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360161
 

125-8746: WIRING GP-FRONT

125-8746 WIRING GP-FRONT
S/N AWG1-UP
PART OF 199-6012 ELECTRICAL AR
i00512729 KEBP0236
1258746 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-0969 [1] HORN AS (24-VOLT, LOW TONE)  
  096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
2. 3E-7842 [1] RESISTOR AS (STARTER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-5677 BD WIRE (18-GA, BLACK)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 7R-8674 [1] BRACKET-HORN  
5. 4L-6454 [5] BOLT (3/8-16X1-IN)  
6. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 3K-6060 [5] LOCKNUT (3/8-16-THD)  
8. 6D-4246 [3] CLIP (LOOP)  
9. 4M-0061 [2] BOLT (5/16-18X0.75-IN)  
10. 5P-9085 [2] CLIP (LOOP)  
11. 5P-9299 [2] CLIP (LOOP)  
12. 9X-0941 [1] LOCKNUT (1/2-13-THD)  
13. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 128-8609 [1] HARNESS AS-FRONT  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  7N-7782 [2] HOUSING-PLUG (14-GA TO 18-GA)  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
    (INCLUDES BOLT, RETAINING RING & SEAL
  8T-8737 [7] PLUG-SEAL  
  8T-8799 [1] BOOT (RED)  
  8T-8827 [1] BOOT (RED)  
  9G-3695 [2] PLUG-SEAL  
15. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
16. 9M-8406 [2] CLIP (LOOP)  
17. 6D-4244 [1] CLIP (LOOP)  
18. 9G-9152 [1] CLIP  
19. 3S-2093 [14] STRAP-CABLE  
20. 116-0118 [1] CLIP  
21. 6R-4330 [1] CABLE AS  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  9G-4344 [1] TERMINAL-RING (4-GA, 1/2-IN SCREW)  
22. 7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
23. 9G-3695 [3] PLUG-SEAL  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#KEBP02360162
 

125-9070: WIRING GP-REAR

125-9070 WIRING GP-REAR
S/N AWG1-UP
PART OF 199-6012 ELECTRICAL AR
i00512793 KEBP0236
1259070 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [8] STRAP-CABLE  
2. 7T-0969 [1] HORN AS (24-VOLT, LOW TONE)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
  096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
3. 3T-1815 [1] ALARM GP  
4. 3K-6060 [5] LOCKNUT (3/8-16-THD)  
5. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 8T-9379 [2] BOLT (3/8-16X4.25-IN)  
7. 128-8611 [1] HARNESS AS-REAR  
  7R-2750 [5] SEAL-CONNECTOR  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  101-8106 [1] LOCK-CONNECTOR  
  101-8108 [1] PLUG-CONNECTOR  
  7N-9738 [4] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  8T-8737 [36] PLUG-SEAL  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
8. 8M-2773 [1] CLIP (LOOP)  
9. 108-4145 [8] CLAMP  
10. 4V-0612 [4] PLATE  
11. 5A-4878 [1] GROMMET  
12. 8L-8413 B [12] STRAP-CABLE (WHITE)  
13. 7R-7964 [8] PLATE  
14. 7X-0440 [4] BOLT (5/16-18X1.75-IN)  
15. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 9G-9150 [4] CLIP  
17. 9X-0941 [2] LOCKNUT (1/2-13-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP02360163
 

139-1174: WIRING GP-REAR DRIVE

139-1174 WIRING GP-REAR DRIVE
S/N AWG1-UP
PART OF 199-5490 DRIVE AR-REAR
AN ATTACHMENT
i00557923 KEBP0236
1391174 WIRING GP-REAR DRIVE Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-1836 [1] SWITCH-TOGGLE (REAR WHEEL ASSIST)  
2. 3S-2093 [25] STRAP-CABLE  
 

#KEBP02360164
 

077-6395: CLUTCH GP

077-6395 CLUTCH GP
S/N AWG1-UP
PART OF 077-5973 CLUTCH GP-POWER TAKE-OFF
i02051157 KEBP0236
0776395 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 081-9174 [1] BODY  
2. 098-3627 [1] PLATE  
3. 077-5269 [2] DISC AS-DRIVE  
4. 9F-0745 [1] PLATE-CENTER  
5. 5E-3344 [4] LEVER  
6. 077-7057 [2] BOLT  
7. 2U-4206 [2] NUT  
8. 078-0197 [1] SLEEVE  
9. 077-3643 [1] BEARING  
   
   
    AVAILABLE REPAIR KIT(S):
  7X-8293 [1] KIT-SERVICE (CLUTCH)  
    (INCLUDES RINGS,PINS,WASHERS,SPRINGS & LINKS MARKED "H" IN GRAPHIC)
  077-5888 [1] KIT-ADJUSTER (CLUTCH)  
    (MARKED "K" IN GRAPHIC)
    (PARTS MARKED "H" & "K" IN GRAPHIC ARE NOT SERVICED SEPARATELY)
 

#KEBP02360165
 

199-5490: DRIVE AR-REAR

199-5490 DRIVE AR-REAR
S/N AWG1-UP
AN ATTACHMENT
i01439629 KEBP0236
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  123-8954 Y [1] DRIVE GP-WHEEL  
  133-3238 Y [1] LINES GP-HYDROSTATIC  
  124-6921 Y [1] VALVE & MTG GP-REAR DRIVE  
  139-1174 Y [1] WIRING GP-REAR DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360166
 

123-8954: DRIVE GP-WHEEL

123-8954 DRIVE GP-WHEEL
S/N AWG1-UP
PART OF 199-5490 DRIVE AR-REAR
AN ATTACHMENT
i00515830 KEBP0236
1238954 DRIVE GP-WHEEL Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-8957 Y [2] MOTOR GP-PISTON  
2. 7X-0374 [16] BOLT (3/4-10X5.75-IN)  
3. 8T-4994 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 6V-8182 [16] NUT (3/4-10-THD)  
5. 113-5076 [1] LEG AS  
6. 122-2249 [1] LEG AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360167
 

086-9778: GEAR GP-PLANETARY

086-9778 GEAR GP-PLANETARY
S/N AWG1-UP
PART OF 135-2688 XMSN, AXLE & FINAL DRIVE GP
i00462176 KEBP0236
0869778 GEAR GP-PLANETARY Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 053-5655 [3] BUTTON-THRUST  
2. 7X-5591 [3] SETSCREW  
3. 098-0735 [1] BUTTON  
4. 065-2802 [3] WASHER (38.89X65.07X1.56-MM THK)  
5. 7R-8986 [3] PINION-PLANETARY (19-TEETH)  
6. 008-1959 [3] WASHER  
7. Z [1] SPIDER  
8. 7R-5859 [3] SHAFT  
9. 5E-0918 [3] SEAL-O-RING  
  Z   NOT SERVICED SEPARATELY
 

#KEBP02360168
 

199-5489: HUB GP-WHEEL

199-5489 HUB GP-WHEEL
S/N AWG1-UP
AN ATTACHMENT
i01439546 KEBP0236
1995489 HUB GP-WHEEL Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-3861 [1] LEG AS  
2. 118-3862 [1] LEG AS  
3. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
4. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 082-1872 [2] WASHER  
6. 6F-2956 [2] CUP-BEARING  
7. 6V-0347 [2] CONE-BEARING  
8. 1B-5174 [2] PLUG-PIPE  
9. 203-7128 [2] HUB-WHEEL  
10. 077-3612 [12] STUD  
11. 108-6600 [12] NUT  
12. 2A-4576 [2] CUP-BEARING (TAPERED ROLLER)  
13. 6V-0957 [2] CONE-BEARING  
14. 082-1742 [2] SEAL  
15. 082-1618 [2] NUT  
16. 3B-4647 [2] PIN-COTTER  
17. 108-6604 [2] CAP  
18. 4L-6454 [12] BOLT (3/8-16X1-IN)  
 

#KEBP02360169
 

125-8758: HYDRAULIC AR-PROPEL

125-8758 HYDRAULIC AR-PROPEL
S/N AWG1-UP
PART OF 199-5464 GENERAL AR
i00512751 KEBP0236
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  126-5051 Y [1] COOLER GP-HYDRAULIC OIL  
  125-8761 Y [1] LINES GP-HYDROSTATIC  
  126-5050 Y [1] LINES GP-ROTOR DRIVE LUBE  
  125-8760 Y [1] MOTOR & MTG GP-PROPEL  
  125-8759 Y [1] PUMP & MTG GP-PROPEL  
  126-5049 Y [1] PUMP & MTG GP-GEAR  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog RM-250C :

SWITCH GP-TEMPERATURE
108-3190 SWITCH GP-TEMPERATURE
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-MAGNETIC
254-3783 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
241-8368 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
167-0138 SWITCH GP-MAGNETIC
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
STARTING MOTOR GP-ELECTRIC
6V-5582 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-5540 STARTING MOTOR GP-ELECTRIC
WIRING GP-FRONT
125-8746 WIRING GP-FRONT
WIRING GP-REAR
125-9070 WIRING GP-REAR
WIRING GP-REAR DRIVE
139-1174 WIRING GP-REAR DRIVE
CLUTCH GP
077-6395 CLUTCH GP
199-5490 DRIVE AR-REAR
DRIVE GP-WHEEL
123-8954 DRIVE GP-WHEEL
GEAR GP-PLANETARY
086-9778 GEAR GP-PLANETARY
HUB GP-WHEEL
199-5489 HUB GP-WHEEL

Truck sale:

2005 CAT RM-250C
USD $80,000 
2005 CAT RM-250C

Edgar Machinery
2001 CAT RM-250C
Call 
2001 CAT RM-250C

BLC PLANT
GAUTENG, South Africa
CAT RM-250C
Call 
CAT RM-250C

BLC PLANT
GAUTENG, South Africa
 
 
2003 CAT RM-250C

STAR TRACTOR
Fort Worth, Texas
 
 
2005 CAT RM-250C

Cat Auction Services
Edmonton, Alberta, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.