AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

125-8761 LINES GP-HYDROSTATIC S/N AWG1-UP PART OF 125-8758 HYDRAULIC AR-PROPEL RM-250C RECLAIMER MIXER


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
POWER TRAIN
MOTOR GP
AXLE GP
POWER TRAIN AR
PUMP GP
TRANSMISSION GP
UNIVERSAL JOINT GP-PUMP DRIVE
DRIVE GP

RECLAIMER MIXER RM-250C RECLAIMER MIXER AWG
 RM-250C Reclaimer Mixer AWG00001-UP (MACHINE) POWERED BY 3406C Engine KEBP0236 RM-250C AWG   (2000)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
LINES GP-HYDROSTATIC
125-8761 LINES GP-HYDROSTATIC
LINES GP-HYDROSTATIC
133-3238 LINES GP-HYDROSTATIC
125-8765 HYDRAULIC AR-AUXILIARY
LINES GP-HYDRAULIC
125-8769 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
130-2804 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
137-9839 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
155-1008 LINES GP-HYDRAULIC
 

#KEBP02360170
 

125-8761: LINES GP-HYDROSTATIC

125-8761 LINES GP-HYDROSTATIC
S/N AWG1-UP
PART OF 125-8758 HYDRAULIC AR-PROPEL
i00889798 KEBP0236
1258761 LINES GP-HYDROSTATIC Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-0141 I [1] HOSE AS  
2. 5E-8097 I [1] HOSE AS  
3. 1P-5766 [6] FLANGE-HALF  
4. 8C-6877 [16] BOLT (7/16-14X1.75-IN)  
5. 8T-5360 [16] WASHER (12X22.5X2.5-MM THK)  
6. 108-4367 CI [1] HOSE AS  
7. 8C-0370 [1] CLAMP AS  
8. 131-4999 [1] TUBE AS  
9. 7K-1181 [10] STRAP-CABLE  
10. 7R-7824 [2] GUARD-HOSE  
11. 1P-3703 [4] SEAL-RECTANGULAR  
12. 131-2168 I [1] HOSE AS  
13. 131-1408 I [1] HOSE AS  
14. 131-1409 I [1] HOSE AS  
15. 7X-9733 [1] FITTING  
16. 8T-3425 BE CHANNEL-TRIM  
17. 5K-9090 [2] SEAL-O-RING  
18. 6V-8946 [1] REDUCER  
19. 6V-9746 [1] SEAL-O-RING  
20. 101-7938 [8] CLAMP-HALF  
21. 7V-6234 [3] PLATE  
22. 5P-2955 [3] BOLT (5/16-18X2.5-IN)  
23. 8V-5719 [1] BOLT (5/16-18X2-IN)(5/16-18X2.5 IN)  
24. 7R-7964 [1] PLATE  
25. 5E-8841 [2] FLANGE-SPLIT  
26. 7R-7940 [4] CLAMP  
27. 7R-7951 [2] PLATE  
28. 7X-0264 [4] BOLT (1/4-20X2.5-IN)  
29. 8T-4606 [1] CLAMP AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP02360171
 

133-3238: LINES GP-HYDROSTATIC

133-3238 LINES GP-HYDROSTATIC
S/N AWG1-UP
PART OF 199-5490 DRIVE AR-REAR
AN ATTACHMENT
i00501082 KEBP0236
1333238 LINES GP-HYDROSTATIC Parts scheme 1333238 LINES GP-HYDROSTATIC Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8038 I [2] HOSE AS  
2. 118-5587 I [4] HOSE AS  
3. 118-1744 I [4] HOSE AS  
4. 119-5751 [2] HOSE AS  
5. 130-1279 I [2] HOSE AS  
6. 137-4255 I [1] HOSE AS  
7. 133-3282 I [2] HOSE AS  
8. 133-8654 I [1] HOSE AS  
9. 116-2866 I [1] HOSE AS  
10. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
11. 148-8376 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8983 [1] ELBOW  
  6V-9746 [2] SEAL-O-RING  
12. 6V-9169 [6] NUT (13/16-16-THD)  
13. 2P-1293 [3] LOCKNUT (1-3/16-12-THD)  
14. 7V-6234 [4] PLATE  
15. 086-8656 [12] NUT  
16. 148-8384 [1] ELBOW AS  
  4J-5477 [2] SEAL-O-RING  
  6V-8979 [1] ELBOW  
17. 5P-2955 [4] BOLT (5/16-18X2.5-IN)  
18. 164-6862 [1] TEE AS  
  6V-9160 [1] TEE-FACE SEAL  
  6V-9746 [3] SEAL-O-RING  
19. 143-9605 I [1] HOSE AS  
20. 148-8429 [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-9840 [1] TEE-SWIVEL  
21. 148-8328 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8633 [1] CONNECTOR  
22. 118-2469 [2] BLOCK  
23. 7X-0317 [8] BOLT (7/16-14X3.75-IN)  
24. 148-8340 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
25. 148-8375 [6] ELBOW AS  
    (EACH INCLUDES)
  6V-8398 [2] SEAL-O-RING  
  6V-8981 [1] ELBOW  
26. 129-4743 [3] CONNECTOR  
27. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
28. 148-8392 [1] ELBOW AS  
  6V-9746 [1] SEAL-O-RING  
  6V-9853 [1] ELBOW  
29. 129-4744 [3] CONNECTOR  
30. 6V-8555 [3] NUT-FACE SEAL (1-14-THD)  
31. 148-8393 [3] ELBOW AS  
    (EACH INCLUDES)
  6V-9852 [1] ELBOW (SWIVEL)  
  7J-9108 [1] SEAL-O-RING  
32. 215-3191 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8937 [1] REDUCER  
33. 148-8444 [2] TEE AS-SWIVEL  
    (EACH INCLUDES)
  6V-8398 [2] SEAL-O-RING  
  6V-9837 [1] TEE-SWIVEL  
34. 148-8416 [2] REDUCER AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  6V-8939 [1] REDUCER-O-RING  
35. 4J-0520 [2] SEAL-O-RING  
36. 160-2249 BG SLEEVE-ABRASION  
37. 7V-6089 [8] CLAMP  
38. 7R-7908 [4] CLAMP  
39. 7V-5628 [6] PLATE (TOP)  
40. 5P-2675 [12] BOLT (1/4-20X1.75-IN)  
41. 101-7938 [8] CLAMP-HALF  
42. 8V-5719 [4] BOLT (5/16-18X2-IN)(5/16-18 THD)  
43. 7R-7964 [12] PLATE  
44. 9C-2643 [8] CLAMP  
45. 4V-0612 [2] PLATE  
46. 7X-0440 [2] BOLT (5/16-18X1.75-IN)  
47. 6R-1317 [4] CLAMP  
48. 4V-0939 [2] BOLT (5/16-18X1.73-IN)  
49. 4V-0611 [4] CLAMP  
50. 7R-7965 [4] NUT  
51. 086-9299 [2] BAR  
52. 7K-1181 [14] STRAP-CABLE  
53. 134-1020 [1] VALVE (HYDRAULIC OIL)  
54. 225-5161 [1] ELBOW AS  
  6V-9746 [1] SEAL-O-RING  
  9X-2398 [1] ELBOW  
55. 130-1278 I [1] HOSE AS  
56. 7J-9108 [3] SEAL-O-RING  
57. 6V-9746 [3] SEAL-O-RING  
  B   USE AS REQUIRED
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP02360172
 

125-8760: MOTOR & MTG GP-PROPEL

125-8760 MOTOR & MTG GP-PROPEL
S/N AWG1-UP
PART OF 125-8758 HYDRAULIC AR-PROPEL
i01362477 KEBP0236
1258760 MOTOR & MTG GP-PROPEL Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-6814 Y [1] MOTOR GP-PISTON  
2. 7X-0368 [4] BOLT (3/4-10X3-IN)  
3. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
4. 6V-8182 [4] NUT (3/4-10-THD)  
5. 6V-9853 C [1] ELBOW  
6. 3D-2824 [1] SEAL-O-RING  
7. 6V-9746 C [2] SEAL-O-RING  
8. 6V-8637 C [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360173
 

149-5921: MOUNTING GP-AXLE

149-5921 MOUNTING GP-AXLE
S/N AWG1-UP
PART OF 154-8139 SUSPENSION AR
AN ATTACHMENT
i01705410 KEBP0236
1495921 MOUNTING GP-AXLE Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8K-1493 [8] BOLT  
2. 3E-9862 [8] LOCKNUT (3/4-10-THD)  
3. 149-3257 [2] PLATE  
 

#KEBP02360174
 

125-8750: POWER TRAIN AR

125-8750 POWER TRAIN AR
S/N AWG1-UP
PART OF 199-5464 GENERAL AR
i00512736 KEBP0236
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  125-8751 Y [1] CONTROL GP-TRANSMISSION  
  125-8754 Y [1] XMSN, AXLE & FINAL DRIVE GP  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360175
 

201-3419: POWER TRAIN AR

201-3419 POWER TRAIN AR
S/N AWG1-UP
PART OF 199-5464 GENERAL AR
i01495818 KEBP0236
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  125-8748 Y [1] CASE GP-CHAIN DRIVE  
  125-8749 Y [1] CHAMBER GP-MIXING  
  201-3414 Y [1] DRIVE GP-ROTOR  
  125-8764 Y [1] POWER TAKE-OFF GP  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360176
 

125-8759: PUMP & MTG GP-PROPEL

125-8759 PUMP & MTG GP-PROPEL
S/N AWG1-UP
PART OF 125-8758 HYDRAULIC AR-PROPEL
i00889651 KEBP0236
1258759 PUMP & MTG GP-PROPEL Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-6812 Y [1] PUMP GP-PISTON  
2. 5P-2424 [4] BOLT (1/2-13X2.25-IN)  
3. 5E-8112 [1] HUB (DRIVE)  
4. 7X-0612 [1] WASHER-HARD (28X51X1.6-MM THK)  
5. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
6. 148-8357 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
7. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
8. 7X-5308 [3] CAP-DUST  
9. 9X-0941 [4] LOCKNUT (1/2-13-THD)  
10. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 0T-0244 [4] BOLT (7/16-20X1.25-IN)  
12. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
13. 148-8423 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  8T-3311 [1] TEE  
14. 6V-9828 [1] CAP (ORFS)  
15. 148-8305 [1] ADAPTER AS  
  3J-1907 [1] SEAL-O-RING  
  5P-9617 [1] ADAPTER  
16. 164-5590 [1] VALVE AS-FLUID SAMPLING  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
17. 8C-3447 [1] CAP-DUST  
18. 180-9286 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  3E-2345 [1] ADAPTER-TEE  
  6V-9746 [1] SEAL-O-RING  
19. 187-3547 [2] COUPLER AS-QUICK DISCONNECT  
20. A [1] PIN-COTTER  
21. A [1] NUT  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360177
 

201-3418: TRANSMISSION GP

201-3418 TRANSMISSION GP
S/N AWG1-UP
PART OF 201-3414 DRIVE GP-ROTOR
i01503705 KEBP0236
2013418 TRANSMISSION GP Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-9558 [2] CLAMP  
2. 1L-8444 [1] TEE  
3. 3B-4617 [2] PIN-COTTER  
4. 7X-9578 Y [1] LINKAGE GP-ROTOR TRANSMISSION  
5. 077-8654 [2] LINK  
6. 081-6808 [1] FLANGE  
7. 081-6856 [1] SUPPORT AS-REAR  
8. 098-0679 [1] SHEAVE  
9. 098-4237 [1] FILTER  
10. 101-9605 [1] PLATE  
11. 106-7650 [1] ADAPTER AS  
12. 109-5081 I [1] HOSE AS  
13. 111-7700 Y [2] UNIVERSAL JOINT GP-ROTOR DRIVE  
14. 129-1905 Y [1] TRANSMISSION GP-ROTOR  
15. 004-7270 [1] FITTING-PIPE  
16. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
17. 2K-4821 [2] LOCKNUT (5/8-18-THD)  
18. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
19. 3M-7045 [1] PLUG (3/4-14 NPT-THD)  
20. 5G-1492 [2] PIN  
21. 6V-9746 [4] SEAL-O-RING  
22. 7X-0269 [2] BOLT (1/4-20X4-IN)  
23. 7X-3183 [8] BOLT (3/8-24X1-IN)  
24. 8C-6874 [3] CONNECTOR  
25. 8F-8306 [1] BUSHING-REDUCER  
26. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
27. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 8J-1256 [1] CLIP (LOOP)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP02360178
 

077-7813: UNIVERSAL JOINT GP-PUMP DRIVE

077-7813 UNIVERSAL JOINT GP-PUMP DRIVE
S/N AWG1-UP
PART OF 125-8757 MOUNTING GP-ENGINE
i00455556 KEBP0236
0777813 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-0509 C [2] FLANGE-YOKE  
2. 5V-7199 C [2] SPIDER & BEARING AS  
    (INCLUDES BEARINGS, CROSS, RINGS & FITTING)
3. 7R-8462 [1] YOKE-SLIP  
4. 098-1062 [1] SHAFT-YOKE  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP02360179
 

124-6921: VALVE & MTG GP-REAR DRIVE

124-6921 VALVE & MTG GP-REAR DRIVE
S/N AWG1-UP
PART OF 199-5490 DRIVE AR-REAR
AN ATTACHMENT
i00518877 KEBP0236
1246921 VALVE & MTG GP-REAR DRIVE Parts scheme
  For full view, you need register

Parts for your RM-250C RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-5158 Y [1] VALVE GP-REAR DRIVE  
2. 126-1289 Y [1] VALVE GP-SOLENOID  
3. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
4. 7X-7729 [4] WASHER (11X25X3-MM THK)  
5. 6V-8653 M [4] BOLT-SOCKET HEAD (M6X1X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26

Caterpillar Parts SIS Catalog RM-250C :

125-8758 HYDRAULIC AR-PROPEL
HUB GP-WHEEL
199-5489 HUB GP-WHEEL
GEAR GP-PLANETARY
086-9778 GEAR GP-PLANETARY
DRIVE GP-WHEEL
123-8954 DRIVE GP-WHEEL
199-5490 DRIVE AR-REAR
CLUTCH GP
077-6395 CLUTCH GP
WIRING GP-REAR DRIVE
139-1174 WIRING GP-REAR DRIVE
WIRING GP-REAR
125-9070 WIRING GP-REAR
LINES GP-HYDROSTATIC
133-3238 LINES GP-HYDROSTATIC
MOTOR & MTG GP-PROPEL
125-8760 MOTOR & MTG GP-PROPEL
MOUNTING GP-AXLE
149-5921 MOUNTING GP-AXLE
125-8750 POWER TRAIN AR
201-3419 POWER TRAIN AR
PUMP & MTG GP-PROPEL
125-8759 PUMP & MTG GP-PROPEL
TRANSMISSION GP
201-3418 TRANSMISSION GP
UNIVERSAL JOINT GP-PUMP DRIVE
077-7813 UNIVERSAL JOINT GP-PUMP DRIVE

Truck sale:

2005 CAT RM-250C
USD $80,000 
2005 CAT RM-250C

Edgar Machinery
2001 CAT RM-250C
Call 
2001 CAT RM-250C

BLC PLANT
GAUTENG, South Africa
CAT RM-250C
Call 
CAT RM-250C

BLC PLANT
GAUTENG, South Africa
 
 
2003 CAT RM-250C

STAR TRACTOR
Fort Worth, Texas
 
 
2005 CAT RM-250C

Cat Auction Services
Edmonton, Alberta, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.