266-0274 CONTROL GP-DIRECTION &amp; SPEED S/N EAA1-UP; FGH1-UP PART OF 350-1441 OPERATOR AR Type 2 AN ATTACHMENT CB-534D

266-0274 CONTROL GP-DIRECTION & SPEED
S/N EAA1-UP; FGH1-UP
PART OF 350-1441 OPERATOR AR
Type 2
AN ATTACHMENT

i04178990 KEBP0242

2660274 CONTROL GP-DIRECTION & SPEED Parts scheme

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	116-0118	[1]	CLIP
2.	216-7943	[1]	FILM-INSTRUCTION (HORN, WTR SPRAY, DRUM CONTROL)
3.	266-3310	[1]	PLATE AS-COVER
	8E-3276	[4]	SPACER (7.5X15X5-MM THK)
4.	363-0351 CY	[1]	CONTROL GP-HANDLE
5.	511-0164	[1]	CONTROL GP-ELECTRONIC (DIRECTION, SPEED)
	502-2366	[1]	CONTROLLER
	510-8303	[1]	SOFTWARE GP-MACHINE
6.	7X-2535 M	[4]	BOLT (M6X1X60-MM)
7.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
8.	7X-7877 E		STRIP-EDGE (4-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02420561

285-3596: CONTROL GP-DIRECTION & SPEED

285-3596 CONTROL GP-DIRECTION & SPEED
S/N EAA530-UP; FGH631-UP
PART OF 202-0025 OPERATOR AR
Type 1
AN ATTACHMENT

i02565924 KEBP0242

2853596 CONTROL GP-DIRECTION & SPEED Parts scheme

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	116-0118	[1]	CLIP
2.	216-7943	[1]	FILM-INSTRUCTION (HORN, WTR SPRAY, DRUM CONTROL)
3.	266-3310	[1]	PLATE AS-COVER
4.	285-3590 Y	[1]	CONTROL GP-HANDLE (DIRECTION, SPEED)
5.	290-7910	[1]	CONTROL GP-ELECTRONIC (DIRECTION, SPEED)
6.	7X-2535 M	[4]	BOLT (M6X1X60-MM)
7.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
8.	7X-7877 E		STRIP-EDGE (4-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02420562

285-3596: CONTROL GP-DIRECTION & SPEED

285-3596 CONTROL GP-DIRECTION & SPEED
S/N EAA530-UP; FGH631-UP
PART OF 202-0025 OPERATOR AR
Type 2
AN ATTACHMENT

i03808623 KEBP0242

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	116-0118	[1]	CLIP
2.	216-7943	[1]	FILM-INSTRUCTION (HORN, WTR SPRAY, DRUM CONTROL)
3.	266-3310	[1]	PLATE AS-COVER
4.	337-3151 CY	[1]	CONTROL GP-HANDLE (DIRECTION, SPEED)
5.	339-5418 C	[1]	CONTROL GP-ELECTRONIC (DIRECTION, SPEED)
6.	7X-2535 M	[4]	BOLT (M6X1X60-MM)
7.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
8.	7X-7877 E		STRIP-EDGE (4-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02420563

291-1828: CONTROL GP-DIRECTION & SPEED

291-1828 CONTROL GP-DIRECTION & SPEED
S/N EAA487-529; FGH580-630
PART OF 202-0025 OPERATOR AR
AN ATTACHMENT

i02514918 KEBP0242

2911828 CONTROL GP-DIRECTION & SPEED Parts scheme

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	116-0118	[1]	CLIP
2.	216-7943	[1]	FILM-INSTRUCTION (HORN, WTR SPRAY, DRUM CONTROL)
3.	266-3310	[1]	PLATE AS-COVER
4.	285-3590 Y	[1]	CONTROL GP-HANDLE (DIRECTION, SPEED)
5.	290-7906	[1]	CONTROL GP-ELECTRONIC (DIRECTION, SPEED)
6.	7X-2535 M	[4]	BOLT (M6X1X60-MM)
7.	9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
8.	7X-7877 E		STRIP-EDGE (4-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02420564

234-9723: CONTROL GP-HANDLE

234-9723 CONTROL GP-HANDLE
S/N EAA1-261; FGH1-UP
PART OF 190-4204 CONTROL GP-DIRECTION & SPEED
ALSO AN ATTACHMENT

i01902615 KEBP0242

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	229-2295	[1]	KIT-INPUT DRIVE
			(INCLUDES INPUT LEVER, BOLT, WASHERS, LOCKNUT & OUTPUT LEVER)
3.	198-6562	[4]	SCREW-FLAT HEAD (10-32X0.625-IN)
4.	231-4021	[1]	COVER
5.	4M-6424 H	[1]	BOLT (5/16-18X3-IN)
7.	4L-1250	[4]	LOCKNUT (10-32-THD)
8.	7X-9443	[2]	NUT (1/4-28-THD)
9.	8T-4171 NM	[1]	BOLT (M6X1X12-MM)
11.	129-3178 NM	[1]	LOCKNUT (M6X1-THD)
12.	178-9983 PM	[2]	LOCKNUT (M4X0.7-THD)
14.	6V-9491 PM	[2]	SCREW-MACHINE (M4X0.7X20-MM)
15.	033-4843 H	[1]	NUT (5/16-18-THD)
16.	230-8774	[1]	KIT-CONNECTOR (CONTROL HANDLE)
			(INCLUDES CONNECTOR, PINS, SEALING PLUGS & LOCKING WEDGE)
17.	166-8074	[4]	WASHER (5.2X11.2X1.6-MM THK)
18.	166-8075	[4]	WASHER (5.2X11.2X0.8-MM THK)
19.	200-5965 P	[1]	LEVER AS

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	230-8771	[1]	KIT-JOYSTICK (SPEED & DIRECTION CONTROL)
			(INCLUDES SWITCH ASSEBLIES, EXPANDABLE TUBE, SHRINK TUBES, SETSCREWS, HANDLE AS & PARTS MARKED J IN THE GRAPHIC)
	245-3019 N	[1]	KIT-DETENT (SPEED & DIRECTION CONTROL)
			(ALSO INCLUDES SPRING-ROLLER LEAF, SPRING LEAF, BOLT & LOCKNUT)
	235-8504 P	[1]	KIT-SENSOR (SPEED & DIRECTION CONTROL)
			(ALSO INCLUDES POTENTIOMETER, SPRING CLIP, SCREWS, LOCKNUTS & PARTS MARKED P IN THE GRAPHIC)
	230-8773 H	[1]	KIT-BEARING (SPEED & DIRECTION CONTROL)
			(ALSO INCLUDES BUSHINGS, WASHER, THRUST RACES, NEEDLE BEARING, NEEDLE BEARING CUP, SPRING WASHERS & PARTS MARKED H IN
			THE GRAPHIC)
	H		KIT MARKED H SERVICES PART(S) MARKED H
	M		METRIC PART
	N		KIT MARKED N SERVICES PART(S) MARKED N
	P		KIT MARKED P SERVICES PART(S) MARKED P

#KEBP02420565

262-7164: CONTROL GP-HANDLE

262-7164 CONTROL GP-HANDLE -DIRECTION, SPEED
S/N EAA262-UP; FGH340-UP
PART OF 190-4204 CONTROL GP-DIRECTION & SPEED, 284-0971 CONTROL GP-HANDLE
AN ATTACHMENT

i02226727 KEBP0242

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	229-2295	[1]	KIT-INPUT DRIVE
			(INCLUDES INPUT LEVER, BOLT, WASHERS, LOCKNUT & OUTPUT LEVER)
2.	230-8774	[1]	KIT-CONNECTOR (CONTROL HANDLE)
			(INCLUDES CONNECTOR, PINS, SEALING PLUGS & WEDGE)
3.	198-6562	[4]	SCREW-FLAT HEAD (10-32X0.625-IN)
4.	231-4021	[1]	COVER
5.	4M-6424 H	[1]	BOLT (5/16-18X3-IN)
6.	166-8074	[4]	WASHER (5.2X11.2X1.6-MM THK)
7.	4L-1250	[4]	LOCKNUT (10-32-THD)
8.	7X-9443	[2]	NUT (1/4-28-THD)
9.	8T-4171 NM	[1]	BOLT (M6X1X12-MM)
10.	166-8075	[4]	WASHER (5.2X11.2X0.8-MM THK)
11.	129-3178 NM	[1]	LOCKNUT (M6X1-THD)
12.	262-7733	[1]	SENSOR GP-POSITION (DIRECTION, SPEED)
	257-2531	[1]	SENSOR GP-POSITION (DIRECTION, SPEED)
	6V-9491 M	[1]	SCREW-MACHINE (M4X0.7X20-MM)
	178-9983 M	[1]	LOCKNUT (M4X0.7-THD)
13.	033-4843 H	[1]	NUT (5/16-18-THD)
14.	200-5965	[1]	LEVER AS

			AVAILABLE REPAIR KIT(S):
	230-8771	[1]	KIT-JOYSTICK (SPEED & DIRECTION CONTROL)
			(INCLUDES SWITCH ASSEBLIES, EXPANDABLE TUBE, SHRINK TUBES, SETSCREWS, HANDLE AS & PARTS MARKED J IN THE GRAPHIC)
	245-3019 N	[1]	KIT-DETENT (SPEED & DIRECTION CONTROL)
			(ALSO INCLUDES SPRING-ROLLER LEAF, SPRING LEAF, BOLT & LOCKNUT)
	230-8773 H	[1]	KIT-BEARING (SPEED & DIRECTION CONTROL)
			(ALSO INCLUDES BUSHINGS, WASHER, THRUST RACES, NEEDLE BEARING, NEEDLE BEARING CUP, SPRING WASHERS & PARTS MARKED H IN
			THE GRAPHIC)
	H		KIT MARKED H SERVICES PART(S) MARKED H
	M		METRIC PART
	N		KIT MARKED N SERVICES PART(S) MARKED N

#KEBP02420566

284-0971: CONTROL GP-HANDLE

284-0971 CONTROL GP-HANDLE
S/N EAA262-486; FGH340-579
PART OF 190-4204 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT

i02453303 KEBP0242

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	262-7164 Y	[1]	CONTROL GP-HANDLE (DIRECTION, SPEED)
2.	283-8438	[1]	SENSOR AS
	9W-0852	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	124-0284 E		TUBE-HEAT SHRINK (3.2-MM DIA)(6-CM)
3.	234-4982	[1]	SCREW-FLAT HEAD (4-40X12.7-MM)
4.	5C-2874 M	[1]	NUT (M5X0.8-THD)
5.	8T-4127 M	[1]	SCREW-MACHINE (M5X0.8X20-MM)
6.	9N-7446	[1]	LOCKNUT (4-40-THD)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02420567

285-3590: CONTROL GP-HANDLE

285-3590 CONTROL GP-HANDLE -DIRECTION, SPEED
S/N EAA1-UP; FGH580-UP
PART OF 266-0274, 285-3596, 291-1828 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT

i02486470 KEBP0242

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	229-2295	[1]	KIT-INPUT DRIVE
			(INCLUDES INPUT LEVER, OUTPUT LEVER, BOLT, LOCKNUT & FLATWASHERS)
3.	198-6562	[4]	SCREW-FLAT HEAD (10-32X0.625-IN)
4.	231-4021	[1]	COVER
5.	4M-6424	[1]	BOLT (5/16-18X3-IN)
7.	4L-1250	[4]	LOCKNUT (10-32-THD)
8.	7X-9443	[2]	NUT (1/4-28-THD)
9.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
10.	245-3019	[1]	KIT-DETENT
			(INCLUDES LOCKNUT, SPRING-ROLLER LEAF, SPRING-LEAF & BOLT)
11.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
12.	262-7733	[1]	SENSOR GP-POSITION (DIRECTION, SPEED)
12A.	6V-9491 M	[2]	SCREW-MACHINE (M4X0.7X20-MM)
12B.	178-9983 M	[2]	LOCKNUT (M4X0.7-THD)
	257-2531	[1]	SENSOR GP-POSITION
13.	033-4843	[1]	NUT (5/16-18-THD)
14.	230-8774	[1]	KIT-CONNECTOR
			(INCLUDES CONNECTOR HOUSING, PINS, SEALING PLUGS & LOCKING WEDGE)
15.	4F-2320	[4]	WASHER (5.5X11X1.6-MM THK)
16.	166-8075	[5]	WASHER (5.2X11.2X0.8-MM THK)
17.	200-5965	[1]	LEVER AS
18.	4F-5395	[1]	LOCKWASHER
19.	8H-9299	[1]	SCREW-PLUNGER GEAR
20.	5C-2874 M	[1]	NUT (M5X0.8-THD)
21.	8T-2658 M	[1]	LOCKNUT (M3X0.5-THD)
22.	8T-4127 M	[1]	SCREW-MACHINE (M5X0.8X20-MM)
23.	195-0940	[1]	SCREW-FLAT HEAD (M3X0.5X20-MM)
24.	283-8438	[1]	SENSOR AS (NEUTRAL POSITION)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	180-9339	[3]	PIN-CONNECTOR (14-GA TO 18-GA)
	124-0284 E		TUBE-HEAT SHRINK (3.2-MM DIA)(6-CM)
25.	326-8252	[1]	BRACKET

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	230-8771	[1]	KIT-JOYSTICK
			(INCLUDES SHRINK TUBE, EXPANDABLE TUBING & PARTS MARKED H IN GRAPHIC)
	230-8773	[1]	KIT-BEARING
			(INCLUDES PARTS MARKED K IN GRAPHIC)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#KEBP02420568

337-3151: CONTROL GP-HANDLE

337-3151 CONTROL GP-HANDLE
S/N EAA1-UP; FGH1-UP
PART OF 266-0274, 285-3596 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT

i03731745 KEBP0242

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	229-2295	[1]	KIT-INPUT DRIVE
			(INCLUDES OUTPUT LEVER, FLATWASHERS, LOCKNUT, INPUT LEVER & BOLT)
3.	198-6562	[4]	SCREW-FLAT HEAD (10-32X0.625-IN)
4.	231-4021	[1]	COVER
5.	4M-6424	[1]	BOLT (5/16-18X3-IN)
7.	4L-1250	[4]	LOCKNUT (10-32-THD)
8.	7X-9443	[2]	NUT (1/4-28-THD)
9.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
10.	300-6857	[1]	KIT-SPRING
			(INCLUDES SPRING AS-LEAF)
11.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
12.	257-8858	[1]	SENSOR GP-POSITION (DIRECTION, SPEED)
13.	031-4155	[1]	LOCKNUT (5/16-18-THD)
14.	230-8774	[1]	KIT-CONNECTOR
			(INCLUDES HOUSING CONNECTOR, PINS, SEALING PLUGS & LOCKING WEDGE)
15.	4F-2320	[4]	WASHER (5.5X11X1.6-MM THK)
16.	166-8075	[5]	WASHER (5.2X11.2X0.8-MM THK)
17.	200-5965	[1]	LEVER AS
18.	4F-5395	[1]	LOCKWASHER
19.	8H-9299	[1]	SCREW-PLUNGER GEAR
20.	5C-2874 M	[1]	NUT (M5X0.8-THD)
21.	8T-2658 M	[1]	LOCKNUT (M3X0.5-THD)
22.	8T-4127 M	[1]	SCREW-MACHINE (M5X0.8X20-MM)
23.	195-0940	[1]	SCREW-FLAT HEAD (M3X0.5X20-MM)
24.	283-8438	[1]	SENSOR AS
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	124-0284 E		TUBE-HEAT SHRINK (3.2-MM DIA)(6-CM)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
25.	326-8252	[1]	BRACKET

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	230-8771	[1]	KIT-JOYSTICK
			(INCLUDES PARTS MARKED J IN THE GRAPHICS)
	230-8773	[1]	KIT-BEARING
			(INCLUDES PARTS MARKED L IN THE GRAPHICS)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#KEBP02420569

363-0351: CONTROL GP-HANDLE

363-0351 CONTROL GP-HANDLE
S/N EAA1-UP; FGH1-UP
PART OF 266-0274 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT

i04178995 KEBP0242

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR: