226-9307 WIRING GP-MACHINE S/N CNH1-438 PART OF 183-4754 ELECTRICAL AR CB-434D VIBRATORY COMPACTOR

226-9307: WIRING GP-MACHINE

226-9307 WIRING GP-MACHINE
S/N CNH1-438
PART OF 183-4754 ELECTRICAL AR

Parts for your CB-434D VIBRATORY COMPACTOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[33]	STRAP-CABLE
2.	224-7716	[1]	HARNESS AS-CHASSIS
3.	224-7585	[1]	HARNESS AS-REAR
4.	116-0118	[5]	CLIP
5.	164-9425	[1]	HORN AS (12-VOLT, LOW TONE)
6.	132-5789	[3]	CLIP
7.	177-2215	[13]	STRAP-DUAL CLAMP
9.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
10.	8T-4133 M	[3]	NUT (M10X1.5-THD)
11.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
12.	2M-3432	[3]	GROMMET
13.	4P-7429	[1]	CLIP (LADDER)
14.	150-1293 M	[3]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
15.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
16.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
17.	192-0279	[1]	SENSOR GP-SPEED (DRUM)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
18.	7K-1181	[37]	STRAP-CABLE
19.	8T-8799	[1]	BOOT (RED)
21.	8M-2773	[1]	CLIP (LOOP)
22.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
23.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
24.	239-4281	[1]	HARNESS AS-SENSOR (DRUM SPEED)
26.	247-3770	[1]	DIODE AS
27.	247-3772	[1]	RESISTOR AS
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	M		METRIC PART

226-9307: WIRING GP-MACHINE

WIRING GP-MACHINE

226-9307 WIRING GP-MACHINE
S/N CNH439-458
PART OF 183-4754 ELECTRICAL AR

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[33]	STRAP-CABLE
2.	224-7716	[1]	HARNESS AS-CHASSIS
3.	224-7585	[1]	HARNESS AS-REAR
4.	116-0118	[5]	CLIP
5.	164-9425	[1]	HORN AS (12-VOLT, LOW TONE)
6.	132-5789	[3]	CLIP
7.	177-2215	[13]	STRAP-DUAL CLAMP
9.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
10.	8T-4133 M	[3]	NUT (M10X1.5-THD)
11.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
12.	2M-3432	[3]	GROMMET
13.	4P-7429	[1]	CLIP (LADDER)
14.	150-1293 M	[3]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
15.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
16.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
17.	263-6123 C	[1]	SENSOR GP-SPEED (DRUM)
	6V-5758	[1]	SEAL-O-RING
	8T-0267 M	[2]	BOLT-SOCKET HEAD (M6X1X12-MM)
18.	7K-1181	[37]	STRAP-CABLE
19.	8T-8799	[1]	BOOT (RED)
21.	8M-2773	[1]	CLIP (LOOP)
22.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
23.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
24.	239-4281	[1]	HARNESS AS-SENSOR (DRUM SPEED)
26.	247-3770	[1]	DIODE AS
27.	247-3772	[1]	RESISTOR AS
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

226-9307: WIRING GP-MACHINE

WIRING GP-MACHINE

226-9307 WIRING GP-MACHINE
S/N CNH459-UP
PART OF 183-4754 ELECTRICAL AR

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[33]	STRAP-CABLE
2.	224-7716	[1]	HARNESS AS-CHASSIS
3.	283-5789 C	[1]	HARNESS AS-REAR
4.	116-0118	[3]	CLIP
5.	164-9425	[1]	HORN AS (12-VOLT, LOW TONE)
6.	132-5789	[2]	CLIP
7.	177-2215	[13]	STRAP-DUAL CLAMP
9.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
10.	8T-4133 M	[3]	NUT (M10X1.5-THD)
11.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
12.	2M-3432	[3]	GROMMET
13.	4P-7429	[1]	CLIP (LADDER)
14.	150-1293 M	[3]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
15.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
16.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
17.	263-6123	[1]	SENSOR GP-SPEED
	6V-5758	[1]	SEAL-O-RING
	8T-0267 M	[2]	BOLT-SOCKET HEAD (M6X1X12-MM)
18.	7K-1181 C	[35]	STRAP-CABLE
19.	8T-8799	[1]	BOOT (RED)
21.	8M-2773	[1]	CLIP (LOOP)
22.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
23.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
24.	130-5300	[2]	CLIP
25.	4P-7581	[1]	CLIP (LADDER)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

202-0030: WIRING GP-PLATFORM

WIRING GP-PLATFORM

202-0030 WIRING GP-PLATFORM -CONSOLE
S/N CNH1-348
PART OF 190-4192 OPERATOR AR
AN ATTACHMENT

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	7Y-8298	[1]	CABLE AS
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
3.	8T-8799	[2]	BOOT (RED)
4.	9G-9154	[1]	CLIP
5.	113-8490	[7]	FUSE (10-AMPERE)
6.	113-8491	[5]	FUSE (15-AMPERE)
7.	113-8492	[4]	FUSE (20-AMPERE)
8.	8T-4244 M	[3]	NUT (M12X1.75-THD)
9.	140-9378	[1]	RELAY AS (12-VOLT)(REAR WORK LIGHTS)
9A.	140-9378	[1]	RELAY AS (12-VOLT)(FRONT WORK LIGHT)
9B.	140-9378	[1]	RELAY AS (12-VOLT)(BRAKE RELEASE LATCH)
9C.	140-9378	[1]	RELAY AS (12-VOLT)(BRAKE RELEASE)
9D.	140-9378	[1]	RELAY AS (12-VOLT)(NEUTRAL START ONE)
9E.	140-9378	[1]	RELAY AS (12-VOLT)(NEUTRAL START TWO)
9F.	140-9378	[1]	RELAY AS (12-VOLT)(INTERMITTENT WATER SPRAY)
9G.	140-9378	[1]	RELAY AS (12-VOLT)(CONTINUOUS WATER SPRAY)
9H.	140-9378	[1]	RELAY AS (12-VOLT)(BACKUP ALARM)
9I.	140-9378	[1]	RELAY AS (12-VOLT)(HORN)
9J.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY NEUTRAL STOP)
9K.	140-9378	[1]	RELAY AS (12-VOLT)(DRUM SPRAY)
10.	205-9915	[1]	HARNESS AS
11.	150-1293 M	[1]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
12.	4B-4863	[1]	WASHER (4.7X11X1.2-MM THK)
13.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
15.	5P-6459	[1]	GROMMET
16.	7K-1181	[14]	STRAP-CABLE
17.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

202-0030: WIRING GP-PLATFORM

WIRING GP-PLATFORM

202-0030 WIRING GP-PLATFORM -CONSOLE
S/N CNH349-579
PART OF 190-4192 OPERATOR AR
AN ATTACHMENT

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	7Y-8298	[1]	CABLE AS
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
3.	8T-8799	[2]	BOOT (RED)
4.	9G-9154	[1]	CLIP
5.	113-8490	[7]	FUSE (10-AMPERE)
6.	113-8491	[5]	FUSE (15-AMPERE)
7.	113-8492	[4]	FUSE (20-AMPERE)
8.	8T-4244 M	[3]	NUT (M12X1.75-THD)
9.	140-9378	[1]	RELAY AS (12-VOLT)(REAR WORK LIGHTS)
9A.	140-9378	[1]	RELAY AS (12-VOLT)(FRONT WORK LIGHT)
9B.	140-9378	[1]	RELAY AS (12-VOLT)(BRAKE RELEASE LATCH)
9C.	140-9378	[1]	RELAY AS (12-VOLT)(BRAKE RELEASE)
9D.	140-9378	[1]	RELAY AS (12-VOLT)(NEUTRAL START ONE)
9E.	140-9378	[1]	RELAY AS (12-VOLT)(NEUTRAL START TWO)
9F.	140-9378	[1]	RELAY AS (12-VOLT)(INTERMITTENT WATER SPRAY)
9G.	140-9378	[1]	RELAY AS (12-VOLT)(CONTINUOUS WATER SPRAY)
9H.	140-9378	[1]	RELAY AS (12-VOLT)(BACKUP ALARM)
9I.	140-9378	[1]	RELAY AS (12-VOLT)(HORN)
9J.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY NEUTRAL STOP)
9K.	140-9378	[1]	RELAY AS (12-VOLT)(DRUM SPRAY)
10.	250-3398 C	[1]	HARNESS AS-CHASSIS
11.	7K-1181	[14]	STRAP-CABLE
12.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
15.	5P-6459	[1]	GROMMET
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

265-5806: WIRING GP-PLATFORM

WIRING GP-PLATFORM

265-5806 WIRING GP-PLATFORM
S/N CNH1-UP
PART OF 268-4742 OPERATOR AR
AN ATTACHMENT

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
2.	8T-8799	[2]	BOOT (RED)
3.	9G-9154	[1]	CLIP
4.	113-8490	[7]	FUSE (10-AMPERE)
5.	113-8491	[5]	FUSE (15-AMPERE)
6.	113-8492	[4]	FUSE (20-AMPERE)
7.	116-0118	[1]	CLIP
8.	140-9378	[1]	RELAY AS (12-VOLT)(HORN)
8A.	140-9378	[1]	RELAY AS (12-VOLT)(FLOODLIGHT, REAR)
8B.	140-9378	[1]	RELAY AS (12-VOLT)(FLOODLIGHTS, FRONT)
8C.	140-9378	[1]	RELAY AS (12-VOLT)(BACKUP ALARM)
8D.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY PUMP, REAR)
8E.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY PUMP, FRONT)
9.	240-5204	[1]	RESISTOR AS
10.	265-5288	[1]	HARNESS AS-CHASSIS
11.	132-5789	[2]	CLIP
12.	134-2540	[1]	RESISTOR AS-CONNECTION (3-PIN)
13.	150-1293 M	[1]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
14.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
15.	5C-2890 M	[1]	NUT (M6X1-THD)
16.	5P-4115	[3]	WASHER-HARD (7.2X19X2-MM THK)
17.	5P-6459	[1]	GROMMET
18.	7K-1181	[10]	STRAP-CABLE
19.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
22.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

291-2596: WIRING GP-PLATFORM

WIRING GP-PLATFORM

291-2596 WIRING GP-PLATFORM
S/N CNH580-1063
PART OF 190-4192 OPERATOR AR
AN ATTACHMENT

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
3.	8T-8799	[2]	BOOT (RED)
4.	9G-9154	[1]	CLIP
5.	113-8490	[7]	FUSE (10-AMPERE)
6.	113-8491	[5]	FUSE (15-AMPERE)
7.	113-8492	[4]	FUSE (20-AMPERE)
8.	140-9378	[12]	RELAY AS (12-VOLT)
9.	291-6180 C	[1]	HARNESS AS-PLATFORM
10.	5P-6459	[1]	GROMMET
11.	7K-1181 C	[14]	STRAP-CABLE
12.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
14.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

291-2596: WIRING GP-PLATFORM

WIRING GP-PLATFORM

291-2596 WIRING GP-PLATFORM
S/N CNH1064-1076
PART OF 190-4192 OPERATOR AR
AN ATTACHMENT

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
3.	8T-8799	[2]	BOOT (RED)
4.	9G-9154	[1]	CLIP
5.	113-8490	[7]	FUSE (10-AMPERE)
6.	113-8491	[5]	FUSE (15-AMPERE)
7.	113-8492	[4]	FUSE (20-AMPERE)
8.	140-9378	[12]	RELAY AS (12-VOLT)
9.	339-5425 C	[1]	HARNESS AS-PLATFORM
	112-9609	[2]	BLOCK-MICRORELAY
	124-9636	[1]	BLOCK-MINIFUSE
	142-9117	[2]	CONNECTOR (10-PIN)
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	111-6795	[1]	HOUSING-RELAY
	112-9610	[4]	LOCK-MICRORELAY
	124-9637	[1]	LOCK-MINIFUSE
	111-6816	[1]	LOCK
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8T-8729	[29]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	180-0050	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	8T-8737	[65]	PLUG-SEAL
	7G-7919	[1]	PLUG-SEAL
	9G-3695	[1]	PLUG-SEAL
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-0146	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	160-2246 G		SLEEVE-ABRASION (83-IN)
	8T-8730	[143]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[11]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	128-4178	[3]	TERMINAL AS
			(EACH INCLUDES)
	2L-8068	[1]	TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)
	5P-6006 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	5P-1477	[2]	TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)
	5P-1475	[2]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	9G-4344	[2]	TERMINAL-RING (4-GA, 1/2-IN SCREW)
	128-4168	[4]	TERMINAL AS
			(EACH INCLUDES)
	6H-3592	[1]	TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)
	128-4172	[2]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	3K-4528	[1]	TERMINAL-RING (6-GA TO 8-GA, 1/2-IN SCREW)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)
	2L-8079	[2]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	5P-4571	[11]	TERMINAL-BLADE (14-GA TO 16-GA)
	2L-8078	[1]	TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)
	112-9611	[23]	TERMINAL-BLADE (18-GA TO 20-GA)
	112-9612	[26]	TERMINAL-BLADE
	116-4160	[9]	TERMINAL-BLADE (12-GA TO 14-GA)
	116-4161	[12]	TERMINAL-BLADE (16-GA TO 18-GA)
	3E-9179	[4]	TERMINAL-RECEPTACLE (14-GA TO 18-GA)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(20-CM)
	9X-8243 E		TUBE-HEAT SHRINK (39.9-MM DIA)(20-CM)
10.	5P-6459	[1]	GROMMET
11.	7K-1181	[14]	STRAP-CABLE
12.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
14.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

300-0531: WIRING GP-PLATFORM

WIRING GP-PLATFORM

300-0531 WIRING GP-PLATFORM
S/N CNH1-1063
PART OF 268-4742 OPERATOR AR
AN ATTACHMENT

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
2.	8T-8799	[2]	BOOT (RED)
3.	9G-9154	[1]	CLIP
4.	113-8490	[7]	FUSE (10-AMPERE)
5.	113-8491	[5]	FUSE (15-AMPERE)
6.	113-8492	[4]	FUSE (20-AMPERE)
7.	116-0118	[1]	CLIP
8.	140-9378	[6]	RELAY AS (12-VOLT)
9.	172-9200	[1]	SUPPRESSOR-ARC
10.	240-5204	[1]	RESISTOR AS
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	116-0118	[1]	CLIP
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(4-CM)
	5P-5677 D		WIRE (18-GA, BLACK)(0.1-M)
11.	297-8775	[1]	HARNESS AS-CHASSIS
12.	132-5789	[2]	CLIP
13.	134-2540	[1]	RESISTOR AS-CONNECTION (3-PIN)
14.	150-1293 M	[1]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
15.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
16.	5C-2890 M	[1]	NUT (M6X1-THD)
17.	5P-4115	[3]	WASHER-HARD (7.2X19X2-MM THK)
18.	5P-6459	[1]	GROMMET
19.	7K-1181	[10]	STRAP-CABLE
20.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
21.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
23.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
24.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

300-0531: WIRING GP-PLATFORM

WIRING GP-PLATFORM

300-0531 WIRING GP-PLATFORM
S/N CNH1064-1135
PART OF 268-4742, 350-3502 OPERATOR AR
AN ATTACHMENT

Parts for your CB-434D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
2.	8T-8799	[2]	BOOT (RED)
3.	9G-9154	[1]	CLIP
4.	113-8490	[7]	FUSE (10-AMPERE)
5.	113-8491	[5]	FUSE (15-AMPERE)
6.	113-8492	[4]	FUSE (20-AMPERE)
7.	116-0118 C	[2]	CLIP
8.	140-9378	[6]	RELAY AS (12-VOLT)
9.	172-9200	[1]	SUPPRESSOR-ARC
10.	339-5427 C	[1]	HARNESS AS-CHASSIS
	112-9609	[1]	BLOCK-MICRORELAY
	124-9636	[1]	BLOCK-MINIFUSE
	142-9117	[3]	CONNECTOR (10-PIN)
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	111-6795	[1]	HOUSING-RELAY
	112-9610	[2]	LOCK-MICRORELAY
	124-9637	[1]	LOCK-MINIFUSE
	111-6816	[1]	LOCK
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	253-8112	[1]	PLUG
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	180-0050	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS & WEDGES)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	8T-8737	[71]	PLUG-SEAL
	7G-7919	[1]	PLUG-SEAL
	9G-3695	[1]	PLUG-SEAL
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-0146	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	169-0705	[2]	SEAL
	160-2246 G		SLEEVE-ABRASION (75.2-IN)
	180-9340	[126]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	283-8106	[48]	SOCKET-CONNECTOR (20-GA)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3L-6513	[1]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	131-1489	[4]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	6H-3592	[1]	TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1492	[3]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	3K-4528	[1]	TERMINAL-RING (6-GA TO 8-GA, 1/2-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	2L-8065	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	131-1497	[4]	TERMINAL AS-RING (10-GA TO 12-GA)
			(EACH INCLUDES)
	2L-8068	[1]	TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	2L-8079	[2]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	112-9611	[16]	TERMINAL-BLADE (18-GA TO 20-GA)
	112-9612	[12]	TERMINAL-BLADE
	116-4160	[15]	TERMINAL-BLADE (12-GA TO 14-GA)
	116-4161	[12]	TERMINAL-BLADE (16-GA TO 18-GA)
	3E-9179	[3]	TERMINAL-RECEPTACLE (14-GA TO 18-GA)
	111-6792	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	111-6793	[1]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(85-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)
11.	132-5789 C	[1]	CLIP
12.	134-2540	[1]	RESISTOR AS-CONNECTION (3-PIN)
13.	150-1293 M	[1]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
14.	4B-4863 C	[2]	WASHER (4.7X11X1.2-MM THK)
15.	5C-2890 M	[1]	NUT (M6X1-THD)
16.	5P-4115 C	[2]	WASHER-HARD (7.2X19X2-MM THK)
17.	5P-6459	[1]	GROMMET
18.	7K-1181	[10]	STRAP-CABLE
19.	8T-0337 CM	[1]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
22.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Engine Starting with Auxiliary Start Receptacle
CB-434D Paving Compactor

Battery Disconnect Switch
CB-434D Paving Compactor

Circuit Breakers - Reset
CB-434D Paving Compactor

Battery or Battery Cable - Inspect/Replace
CB-434D Paving Compactor

Battery - Clean/Check
CB-434D Paving Compactor

Fuses - Replace
CB-434D Paving Compactor

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Procedure to Install Improved Control System on Certain Asphalt Compactors{1408, 3065, 5070, 5462, 7620}
Procedure to Install Improved Control System on Certain Asphalt Compactors{1408, 3065, 5070, 5462, 7620}

Procedure to Install a New Parking Brake Switch on Certain Paving Compactors{1408, 4267}
Procedure to Install a New Parking Brake Switch on Certain Paving Compactors{1408, 4267}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW MACHINE ECM SOFTWARE AND REPLACING THE PROPEL PUMP EDC ON CERTAIN CB-434D AND CB-534D ASPHALT COMPACTORS CONFIGURED WITH ITIALIAN ROAD HOMOLOGATION
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW MACHINE ECM SOFTWARE AND REPLACING THE PROPEL PUMP EDC ON CERTAIN CB-434D AND CB-534D ASPHALT COMPACTORS CONFIGURED WITH ITIALIAN ROAD HOMOLOGATION

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Specifications

Engine Wiring
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems

Platform Wiring
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems

Switch (Offset)
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Systems Operation

Location of Electrical Components (Propel System)
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System

Propel Electrical System
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System

Location of Electrical Components
CB-434D and CB-434D XW Vibratory Paving Compactor Vibratory System

Water Spray Electrical System
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PL641 CELLULAR RADIO ON CERTAIN CATERPILLAR PRODUCTS WITH A 12 VOLT ELECTRICAL SYSTEM

Testing and Adjusting

Electric Starting System - Test
3054C Engines for Caterpillar Built Machines

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

Wiring Harness (Short Circuit) - Test
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors

Wiring Harness (Open Circuit) - Test
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors

Electrical Connector - Inspect
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors

Connector Locations
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors

Harness Jumper (Vibratory Configuration) - Test
CB-434D, CB-534D and CB-564D Asphalt Compactors

Harness Jumper (Drum Offset) - Test
CB-434D, CB-534D and CB-564D Asphalt Compactors

Harness Jumper (Model Configuration) - Test
CB-434D, CB-534D and CB-564D Asphalt Compactors

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

A New Procedure to Test the Solenoid is Now Available for the Throttle Control on Paving Compactors and Asphalt Pavers {1264, 1265, 1408}
2009/02/02

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog CB-434D :

Truck sale:

55,146 USD

Caterpillar CB-434D, Construction
- Twin drum rollers
Parana Equipamentos S.A.
Brazil

55,146 USD

Caterpillar CB-434D, Construction
- Twin drum rollers
Parana Equipamentos S.A.
Brazil

39,000

Caterpillar CB-434D, Construction
- Twin drum rollers
H.O. PENN MACHINERY CO., INC.

62,500

Caterpillar CB-434D, Construction
- Twin drum rollers
FOLEY, INC.

55,000

Caterpillar CB-434D, Construction
- Twin drum rollers
CASHMAN EQUIPMENT CO.