BASIC ENGINE
CYLINDER BLOCK GPHOUSING GP-FLYWHEEL
PULLEY GP
VALVE MECHANISM GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OILGAUGE GP-OIL LEVEL (DIPSTICK)
BASIC ENGINE
CYLINDER BLOCK GP#KEBP02580040
236-6604: PLUG GP-CYLINDER BLOCK
236-6604 PLUG GP-CYLINDER BLOCK
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 035-8063 | [2] | PLUG |
#KEBP02580041
239-1349: PLUG GP-CYLINDER BLOCK
239-1349 PLUG GP-CYLINDER BLOCK
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 069-1124 | [2] | PLUG |
#KEBP02580042
233-2765: PLUG GP-ENGINE
233-2765 PLUG GP-ENGINE -TIMING CASE
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2B-0858 | [1] | PLUG-PIPE |
#KEBP02580043
220-6152: PLUG GP-FLYWHEEL HOUSING
220-6152 PLUG GP-FLYWHEEL HOUSING
S/N CPT1-UP
PART OF 176-3165 ENGINE AR-PRIMARY
S/N CPT1-UP
PART OF 176-3165 ENGINE AR-PRIMARY
#KEBP02580044
233-2684: PULLEY GP-CRANKSHAFT
233-2684 PULLEY GP-CRANKSHAFT
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02580045
146-8956: ROCKER ARM GP
146-8956 ROCKER ARM GP
S/N CPT1-UP
PART OF 216-8619 VALVE MECHANISM GP
ALSO AN ATTACHMENT
S/N CPT1-UP
PART OF 216-8619 VALVE MECHANISM GP
ALSO AN ATTACHMENT
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-1206 | [6] | BRACKET-SHAFT | |
| 2. | 6I-3717 | [1] | BOLT (10X0.5-IN) | |
| 3. | 6I-3718 | [1] | CONNECTION-FEED | |
| 4. | 6V-8183 | [12] | NUT-FULL (3/8-24-THD) | |
| 5. | 195-7004 B | [2] | SHIM | |
| 6. | 006-8606 | [2] | RING-RETAINING | |
| 7. | 067-6087 | [4] | SPRING-SHAFT | |
| 8. | 067-6088 | [2] | SPRING-SHAFT | |
| 9. | 185-1546 | [8] | SCREW | |
| 10. | 138-2054 | [2] | WASHER | |
| 11. | 209-0091 | [6] | LEVER AS (LH)(EXHAUST) | |
| (EACH INCLUDES) | ||||
| 12. | 209-0093 | [1] | BUSHING | |
| 13. | 209-0092 | [6] | LEVER AS (RH)(INTAKE) | |
| (EACH INCLUDES) | ||||
| 14. | 209-0093 | [1] | BUSHING | |
| 15. | 146-8957 | [1] | SHAFT AS | |
| 16. | 067-6083 | [2] | PLUG-SHAFT END | |
| 17. | 129-3493 | [1] | FERRULE | |
| B | USE AS REQUIRED | |||
#KEBP02580046
216-8619: VALVE MECHANISM GP
216-8619 VALVE MECHANISM GP
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02580047
216-9683: FILTER GP-ENGINE OIL
216-9683 FILTER GP-ENGINE OIL
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N CPT1-UP
PART OF 176-3165, 302-0524 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-2327 | [2] | FILTER AS-ENGINE OIL |
#KEBP02580048
204-4343: GAUGE GP-OIL LEVEL (DIPSTICK)
204-4343 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N ASA1-UP; BWE1-UP
PART OF 203-3845 INSTALLATION AR-ENGINE
Type 1
S/N ASA1-UP; BWE1-UP
PART OF 203-3845 INSTALLATION AR-ENGINE
Type 1
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-1497 | [1] | SEAL | |
| 2. | 166-3988 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE) | |
| 3. | 166-3990 | [1] | FILM-INFORMATION (ENGINE OIL) | |
| 4. | 236-0473 | [1] | BRACKET | |
| 5. | 204-4344 | [1] | TUBE AS | |
| 5A. | 6I-4079 | [1] | NUT | |
| 6. | 7X-7729 | [3] | WASHER (11X25X3-MM THK) | |
| 7. | 8S-8820 | [1] | CLIP | |
| 8. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 9. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#KEBP02580049
204-4343: GAUGE GP-OIL LEVEL (DIPSTICK)
204-4343 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N ASA1-UP; BWE1-UP
PART OF 203-3845 INSTALLATION AR-ENGINE
Type 2
S/N ASA1-UP; BWE1-UP
PART OF 203-3845 INSTALLATION AR-ENGINE
Type 2
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SISInformation:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Specifications
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Disassembly and Assembly
Caterpillar Parts SIS Catalog CS-563E :
Truck sale:
90,640


