OPERATOR STATION
CONTROL GP-PROPELCONTROL GP-STEERING
TILT GP-CAB
MONITOR GP
DOOR GP
OPERATOR STATION
CONTROL GP-PROPEL
#KEBP02580370
197-3300: CONTROL GP-PROPEL
197-3300 CONTROL GP-PROPEL
S/N ASA1-UP; BWE1-UP
PART OF 209-0532 CONTROL GP-DIRECTION & SPEED
Type 2
AN ATTACHMENT
S/N ASA1-UP; BWE1-UP
PART OF 209-0532 CONTROL GP-DIRECTION & SPEED
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 197-9695 | [1] | BEARING-NEEDLE | |
| 2. | 9X-3401 C | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 3. | 151-9274 C | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 4B-1282 | [2] | SCREW-MACHINE (1/4-20X0.75-IN) | |
| 5. | 009-9258 | [2] | NUT (1/4-20-THD) | |
| 6. | 186-3169 | [2] | SPACER | |
| 7. | 198-1111 | [1] | BUSHING | |
| 8. | 186-3171 | [1] | BUSHING | |
| 9. | 5B-3180 | [1] | NUT (5/16-18-THD) | |
| 10. | 031-4155 | [1] | LOCKNUT (5/16-18-THD) | |
| 11. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 12. | 140-9685 | [4] | WASHER-SPRING (8.64X22.1X1.9-MM THK) | |
| 13. | 077-7467 | [2] | RACE-THRUST BEARING | |
| 14. | 197-9181 | [1] | DISC-FRICTION | |
| 15. | 166-8072 | [2] | SPRING-COMPRESSION | |
| 16. | 4L-1250 C | [5] | LOCKNUT (10-32-THD) | |
| 17. | 166-8070 | [2] | BOLT-SOCKET HEAD (10-32X11.18-MM) | |
| 18. | 166-8071 | [1] | BEARING-CONNECTING ROD | |
| 19. | 8L-6521 | [1] | BOLT (10-32X0.5-IN) | |
| 20. | 7X-2466 | [1] | CLIP | |
| 21. | 140-9337 | [1] | SWITCH-MICRO (BACKUP ALARM) | |
| 22. | 171-2842 | [2] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | |
| 23. | 8T-2658 M | [2] | LOCKNUT (M3X0.5-THD) | |
| 24. | 426-1999 | [1] | CONTROL GP-HANDLE (PROPEL LEVER) | |
| 107-1721 | [1] | CAP | ||
| 107-1964 | [6] | SCREW-PAN HEAD (6-19X0.5-IN) | ||
| 312-5546 | [1] | SWITCH AS-PUSH BUTTON | ||
| 25. | 456-3464 | [1] | LEVER | |
| 26. | 140-9338 | [1] | BOOT | |
| 27. | 8H-4959 | [2] | BOLT (10-32X0.875-IN) | |
| 28. | 098-3602 | [1] | SWIVEL | |
| 29. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 141-1794 | [1] | PIN-COTTER | |
| 31. | 166-8068 | [1] | CLAMP-CABLE | |
| 32. | 3E-9865 | [1] | LOCKNUT (1/4-20-THD) | |
| 33. | 3K-5761 | [1] | WASHER (0.328X0.62X0.032-IN THK) | |
| 34. | 197-9238 | [1] | CUP-BEARING | |
| 35. | 125-7876 CE | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP02580371
197-8545: CONTROL GP-PROPEL
197-8545 CONTROL GP-PROPEL
S/N ASA1-UP; BWE1-UP
PART OF 216-9513 CONTROL GP-PROPEL
Type 1
AN ATTACHMENT
S/N ASA1-UP; BWE1-UP
PART OF 216-9513 CONTROL GP-PROPEL
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-1282 | [2] | SCREW-MACHINE (1/4-20X0.75-IN) | |
| 2. | 009-9258 | [2] | NUT (1/4-20-THD) | |
| 3. | 186-3169 | [2] | SPACER | |
| 4. | 198-1111 | [1] | BUSHING | |
| 5. | 186-3171 | [2] | BUSHING | |
| 6. | 5B-3180 | [1] | NUT (5/16-18-THD) | |
| 7. | 031-4155 | [1] | LOCKNUT (5/16-18-THD) | |
| 8. | 7X-3393 | [1] | WASHER-HARD (8.3X19X1.83-MM THK) | |
| 9. | 140-9685 | [4] | WASHER-SPRING (8.64X22.1X1.9-MM THK) | |
| 10. | 077-7467 | [2] | RACE-THRUST BEARING | |
| 11. | 197-9181 | [1] | DISC-FRICTION | |
| 12. | 4L-1250 | [3] | LOCKNUT (10-32-THD) | |
| 13. | 166-8072 | [2] | SPRING-COMPRESSION | |
| 14. | 166-8070 | [2] | BOLT-SOCKET HEAD (10-32X11.18-MM) | |
| 15. | 166-8071 | [1] | BEARING-CONNECTING ROD | |
| 16. | 8L-6521 | [1] | BOLT (10-32X0.5-IN) | |
| 17. | 7X-2466 | [1] | CLIP | |
| 18. | 140-9337 | [1] | SWITCH-MICRO (NEUTRAL POSITION SENSOR) | |
| 19. | 171-2842 | [2] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | |
| 20. | 8T-2658 M | [2] | LOCKNUT (M3X0.5-THD) | |
| 21. | 186-3380 Y | [1] | CONTROL GP-HANDLE (PROPEL LEVER) | |
| 22. | 198-3034 | [1] | LEVER | |
| 23. | 140-9338 | [1] | BOOT | |
| 24. | 8H-4959 | [2] | BOLT (10-32X0.875-IN) | |
| 25. | 098-3602 | [1] | SWIVEL | |
| 26. | 141-1794 | [1] | PIN-COTTER | |
| 27. | 3K-5761 | [1] | WASHER (0.328X0.62X0.032-IN THK) | |
| 28. | 3E-9865 | [1] | LOCKNUT (1/4-20-THD) | |
| 29. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 166-8068 | [1] | CLAMP-CABLE | |
| 31. | 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 32. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 33. | 197-9238 | [1] | CUP-BEARING | |
| 34. | 197-9695 | [1] | BEARING-NEEDLE | |
| 35. | 218-9847 | [1] | WIRE AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02580372
197-8545: CONTROL GP-PROPEL
197-8545 CONTROL GP-PROPEL
S/N ASA1-UP; BWE1-UP
PART OF 216-9513 CONTROL GP-PROPEL
Type 2
AN ATTACHMENT
S/N ASA1-UP; BWE1-UP
PART OF 216-9513 CONTROL GP-PROPEL
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-1282 | [2] | SCREW-MACHINE (1/4-20X0.75-IN) | |
| 2. | 009-9258 | [2] | NUT (1/4-20-THD) | |
| 3. | 186-3169 | [2] | SPACER | |
| 4. | 198-1111 | [1] | BUSHING | |
| 5. | 186-3171 | [2] | BUSHING | |
| 6. | 5B-3180 | [1] | NUT (5/16-18-THD) | |
| 7. | 031-4155 | [1] | LOCKNUT (5/16-18-THD) | |
| 8. | 7X-3393 | [1] | WASHER-HARD (8.3X19X1.83-MM THK) | |
| 9. | 140-9685 | [4] | WASHER-SPRING (8.64X22.1X1.9-MM THK) | |
| 10. | 077-7467 | [2] | RACE-THRUST BEARING | |
| 11. | 197-9181 | [1] | DISC-FRICTION | |
| 12. | 4L-1250 C | [5] | LOCKNUT (10-32-THD) | |
| 13. | 166-8072 | [2] | SPRING-COMPRESSION | |
| 14. | 166-8070 | [2] | BOLT-SOCKET HEAD (10-32X11.18-MM) | |
| 15. | 166-8071 | [1] | BEARING-CONNECTING ROD | |
| 16. | 8L-6521 | [1] | BOLT (10-32X0.5-IN) | |
| 17. | 7X-2466 | [1] | CLIP | |
| 18. | 140-9337 | [1] | SWITCH-MICRO (NEUTRAL POSITION) | |
| 19. | 171-2842 | [2] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | |
| 20. | 8T-2658 M | [2] | LOCKNUT (M3X0.5-THD) | |
| 21. | 186-3380 Y | [1] | CONTROL GP-HANDLE (PROPEL LEVER) | |
| 22. | 198-3034 | [1] | LEVER | |
| 23. | 140-9338 | [1] | BOOT | |
| 24. | 8H-4959 | [2] | BOLT (10-32X0.875-IN) | |
| 25. | 098-3602 | [1] | SWIVEL | |
| 26. | 141-1794 | [1] | PIN-COTTER | |
| 27. | 3K-5761 | [1] | WASHER (0.328X0.62X0.032-IN THK) | |
| 28. | 3E-9865 | [1] | LOCKNUT (1/4-20-THD) | |
| 29. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 30. | 166-8068 | [1] | CLAMP-CABLE | |
| 31. | 9X-3401 C | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 32. | 151-9274 C | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 33. | 197-9238 | [1] | CUP-BEARING | |
| 34. | 197-9695 | [1] | BEARING-NEEDLE | |
| 36. | 8T-7931 | [1] | SETSCREW (1/2-20-THD) | |
| 37. | 245-2930 | [1] | NUT-JAM (1/2-20-THD)(1/4-20-THD) | |
| 38. | 245-2931 | [1] | SWITCH AS-BALL | |
| 39. | 245-2959 | [1] | LOCKNUT-SPECIAL (9/16-18-THD) | |
| 40. | 125-7876 CE | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02580373
216-9513: CONTROL GP-PROPEL
216-9513 CONTROL GP-PROPEL
S/N ASA1-UP; BWE1-UP
PART OF 217-8179 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT
S/N ASA1-UP; BWE1-UP
PART OF 217-8179 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-6329 | [1] | BEZEL | |
| 2. | 6V-8927 | [2] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 194-1924 | [1] | HARNESS AS (VIBRATORY CONTROL) | |
| 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2272 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3736 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [5] | STRAP-CABLE | ||
| 5P-2321 | [4] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 5. | 194-3748 | [1] | FILM-IDENTIFICATION (VIBRATORY) | |
| 6. | 197-3229 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROLS) | |
| 7. | 197-8545 Y | [1] | CONTROL GP-PROPEL | |
| 8. | 6T-3990 | [1] | SWITCH AS-ROCKER (AUTO VIB) | |
| 3L-8187 | [2] | LOCKWASHER | ||
| 6V-8374 | [2] | SCREW-MACHINE (6-32X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02580374
203-6554: CONTROL GP-STEERING
203-6554 CONTROL GP-STEERING
S/N ASA1-569; BWE1-248
PART OF 203-4399 HYDRAULIC AR-AUXILIARY
S/N ASA1-569; BWE1-248
PART OF 203-4399 HYDRAULIC AR-AUXILIARY
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2T-3360 | [1] | BUTTON AS-HORN | |
| 2. | 8R-2918 | [1] | KNOB AS (STEERING WHEEL) | |
| 3. | 9D-7924 | [4] | MOUNTING AS | |
| 4. | 107-6141 | [1] | COVER | |
| 5. | 111-7874 | [1] | SEAL | |
| 6. | 111-7878 | [1] | COVER | |
| 7. | 129-3270 | [1] | STEERING WHEEL AS | |
| 8. | 134-2364 | [1] | ANGLE AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 9. | 225-6323 | [1] | PLATE AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 10. | 154-5212 | [1] | SUPPORT AS | |
| 7T-1099 | [2] | LINK | ||
| 11. | 176-9166 | [1] | COLUMN AS (STEERING) | |
| 149-0777 | [1] | KNOB | ||
| 149-0779 | [1] | KIT-SHAFT (STEERING COLUMN) | ||
| (INCLUDES SEAL-O-RING, RETAINER RING, SHAFT PROTECTOR & GREASE) | ||||
| 176-9170 | [1] | KIT-GAS SPRING (STEERING COLUMN) | ||
| (INLUDES DOWEL PINS, SET SCREWS, COMPRESSION SPRING & GAS SPRING) | ||||
| 220-3926 | [1] | KIT-REPAIR (HORN) | ||
| (INLUDES SCREW, HORN CONTACT AS & GREASE) | ||||
| 12. | 203-6541 J | [1] | PUMP GP-METERING (HMU) | |
| 13. | 148-8340 | [4] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8639 | [1] | CONNECTOR | ||
| 14. | 5P-4116 | [5] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 16. | 7X-0578 | [4] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 17. | 105-3484 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 18. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 8T-4908 M | [5] | BOLT (M8X1.25X25-MM) | |
| 21. | 8T-6869 M | [4] | BOLT (M8X1.25X60-MM) | |
| 22. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 23. | 148-8369 | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8628 | [1] | ELBOW | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 214-7469 J | [1] | KIT-SEAL (HMU) | ||
| (INCLUDES WASHER & SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#KEBP02580375
203-6554: CONTROL GP-STEERING
203-6554 CONTROL GP-STEERING
S/N ASA1-UP; BWE1-UP
PART OF 203-4399, 291-5082 HYDRAULIC AR-AUXILIARY
S/N ASA1-UP; BWE1-UP
PART OF 203-4399, 291-5082 HYDRAULIC AR-AUXILIARY
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2T-3360 | [1] | BUTTON AS-HORN | |
| 2. | 153-7369 CY | [1] | KNOB GP-STEERING | |
| 3. | 9D-7924 | [4] | MOUNTING AS | |
| 4. | 107-6141 | [1] | COVER | |
| 5. | 270-1634 | [1] | SEAL | |
| 6. | 111-7878 | [1] | COVER | |
| 7. | 145-9291 C | [1] | STEERING WHEEL AS | |
| 8. | 134-2364 | [1] | ANGLE AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 9. | 225-6323 | [1] | PLATE AS | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 10. | 154-5212 | [1] | SUPPORT AS | |
| 6V-0352 D | SEAL (0.1-M) | |||
| 7T-1099 | [2] | LINK | ||
| 107-6011 | [1] | PLATE AS | ||
| 11. | 176-9166 | [1] | COLUMN AS | |
| 149-0777 | [1] | KNOB | ||
| 220-3926 | [1] | KIT-REPAIR (HORN) | ||
| (INCLUDES HORN CONTACT AS & SCREW) | ||||
| 149-0779 | [1] | KIT-SHAFT (STEERING COLUMN) | ||
| (INCLUDES RETAINER RING, O-RING & SHAFT PROTECTOR) | ||||
| 176-9170 | [1] | KIT-GAS SPRING (STEERING COLUMN) | ||
| (INCLUDES DOWEL PINS, GAS SPRING, COMPRESSOR SPRING, SET SCREWS & TILT LEVER) | ||||
| 12. | 265-7813 | [1] | PUMP GP-METERING (HMU)(STEERING PUMP) | |
| 13. | 148-8340 | [4] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8639 | [1] | CONNECTOR | ||
| 14. | 5P-4116 | [5] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 16. | 7X-0578 | [8] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 17. | 105-3484 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 18. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 8T-4908 M | [5] | BOLT (M8X1.25X25-MM) | |
| 21. | 8T-6869 M | [4] | BOLT (M8X1.25X60-MM) | |
| 22. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 23. | 148-8369 | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8628 | [1] | ELBOW | ||
| 24. | 217-8058 C | [1] | WIRE AS (HORN) | |
| 25. | 8T-0267 CM | [1] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02580376
178-3836: CYLINDER & MTG GP-TILT
178-3836 CYLINDER & MTG GP-TILT -CAB
S/N ASA1-UP; BWE1-UP
PART OF 212-1559 TILT AR-CAB
AN ATTACHMENT
S/N ASA1-UP; BWE1-UP
PART OF 212-1559 TILT AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9862 | [2] | LOCKNUT (3/4-10-THD) | |
| 2. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 3. | 7R-6728 | [1] | ADAPTER | |
| 4. | 7X-0564 | [2] | WASHER-HARD (20X51X3-MM THK) | |
| 5. | 148-8320 | [3] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8C-6865 | [1] | CONNECTOR | ||
| 6. | 081-3119 | [2] | SEAL-RUBBER | |
| 7. | 081-3772 | [1] | LEVER | |
| 8. | 128-1624 | [1] | SUPPORT AS | |
| 9. | 128-4119 | [1] | CYLINDER AS-TILT | |
| 10. | 128-4120 | [1] | PUMP AS-HAND (TILT CYLINDER) | |
| 11. | 147-7370 | [1] | BRACKET AS | |
| 12. | 373-2353 I | [2] | HOSE AS | |
| 13. | 167-1192 | [2] | CLIP | |
| 14. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 15. | 4J-5477 | [1] | SEAL-O-RING | |
| 16. | 7X-0370 | [1] | BOLT (3/4-10X3.5-IN) | |
| 17. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 18. | 8C-6857 | [1] | BOLT (3/4-10X2.75-IN) | |
| 19. | 8T-0288 M | [2] | BOLT (M5X0.8X12-MM) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 7X-2553 M | [4] | BOLT (M16X2X40-MM) | |
| 22. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#KEBP02580377
286-0134: DISPLAY GP-MONITOR
286-0134 DISPLAY GP-MONITOR -CD700
S/N ASA1-UP
PART OF 292-1115 GRADE CONTROL AR-SATELLITE
S/N ASA1-UP
PART OF 292-1115 GRADE CONTROL AR-SATELLITE
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 244-1716 | [1] | DISPLAY GP-MONITOR (CD700C) | ||
| 337-5123 | [1] | KIT-MAGNET (DOOR) | ||
| (INCLUDES ADHESIVE, MAGNETS & PAD-ALCOHOLS) | ||||
| 283-4426 | [1] | CARD AS-MEMORY (FLASH) | ||
| 194-8031 | [1] | ADAPTER | ||
| 8T-4171 M | [4] | BOLT (M6X1X12-MM) | ||
| 292-0311 | [1] | CASE-CARRYING | ||
| 8T-0285 M | [6] | SCREW-MACHINE (M4X0.7X12-MM) | ||
| 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | ||
| 096-6166 | [6] | WASHER-HARD (4.5X9X1-MM THK) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#KEBP02580378
223-4276: DOOR GP-CAB
223-4276 DOOR GP-CAB -SLIDING WINDOW, LH
S/N ASA1-UP; BWE1-UP
PART OF 206-7431, 254-5689 ROPS GP-ENCLOSED
Type 1
AN ATTACHMENT
S/N ASA1-UP; BWE1-UP
PART OF 206-7431, 254-5689 ROPS GP-ENCLOSED
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-5201 | [1] | BEARING | |
| 2. | 109-5008 | [1] | BUMPER-CONICAL | |
| 3. | 7W-2108 | [1] | SPRING-BYPASS VALVE | |
| 4. | 7X-2497 | [1] | HANDLE-DOOR | |
| 5. | 8T-4180 M | [4] | SCREW-MACHINE (M5X0.8X20-MM) | |
| 6. | 8T-4742 | [1] | END-YOKE ROD | |
| 7. | 8T-4747 | [2] | BRACKET | |
| 8. | 8Y-4807 J | [1] | HANDLE AS (DOOR, LH) | |
| 8Y-4501 | [1] | SPRING-HANDLE | ||
| 9. | 8Y-6386 | [1] | SEAL-HANDLE | |
| 10. | 9G-2761 | [1] | LATCH AS-DOOR | |
| 11. | 107-6117 | [1] | COVER (LH) | |
| 12. | 141-8580 | [1] | RING-RETAINING | |
| 13. | 161-9640 | [1] | COVER | |
| 14. | 161-9641 | [1] | PLATE | |
| 15. | 161-9642 | [1] | ROD AS | |
| 16. | 161-9647 | [1] | PLATE | |
| 17. | 162-2188 | [1] | DOOR AS (LH) | |
| [2] | INSERT | |||
| 107-6125 | [2] | HINGE AS | ||
| (EACH INCLUDES) | ||||
| 096-2323 | [2] | RING-RETAINING (EXTERNAL) | ||
| [1] | STRIP | |||
| 111-0200 | [1] | HANDRAIL | ||
| 115-1552 | [1] | HANDLE-PULL | ||
| 18. | 162-2190 | [1] | GLASS-CAB (DOOR) | |
| 19. | 168-2457 | [1] | LATCH AS-DOOR (HOLD OPEN) | |
| 20. | 169-3995 | [1] | SEAL | |
| 21. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 22. | 180-3871 Y | [1] | WINDOW GP-DOOR (SLIDING) | |
| 23. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 24. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 25. | 8T-4181 M | [5] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 28. | 9X-2042 M | [11] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 29. | 3E-3805 E | SEAL (420-CM) | ||
| 30. | 118-3094 M | [2] | BOSS-THREADED (M8X1.25-THD) | |
| 31. | 157-8861 | [2] | ROD-THREADED | |
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02580379
223-4276: DOOR GP-CAB
223-4276 DOOR GP-CAB -SLIDING WINDOW, LH
S/N ASA1-UP; BWE1-UP
PART OF 254-5689 ROPS GP-ENCLOSED
Type 2
AN ATTACHMENT
S/N ASA1-UP; BWE1-UP
PART OF 254-5689 ROPS GP-ENCLOSED
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your CS-563E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-5201 | [1] | BEARING | |
| 2. | 109-5008 | [1] | BUMPER-CONICAL | |
| 3. | 7W-2108 | [1] | SPRING-BYPASS VALVE | |
| 4. | 7X-2497 | [1] | HANDLE-DOOR | |
| 5. | 8T-4180 M | [4] | SCREW-MACHINE (M5X0.8X20-MM) | |
| 6. | 8T-4742 | [1] | END-YOKE ROD | |
| 7. | 8T-4747 | [2] | BRACKET | |
| 8. | 8Y-4807 J | [1] | HANDLE AS | |
| 8Y-4501 | [1] | SPRING-HANDLE | ||
| 9. | 8Y-6386 | [1] | SEAL-HANDLE | |
| 10. | 9G-2761 | [1] | LATCH AS-DOOR | |
| 11. | 107-6117 | [1] | COVER (LH) | |
| 12. | 141-8580 | [1] | RING-RETAINING | |
| 13. | 161-9640 | [1] | COVER | |
| 14. | 161-9641 | [1] | PLATE | |
| 15. | 161-9642 | [1] | ROD AS | |
| 16. | 161-9647 | [1] | PLATE | |
| 17. | 360-7448 C | [1] | DOOR AS (LH) | |
| 18. | 162-2190 | [1] | GLASS-CAB (DOOR) | |
| 19. | 168-2457 | [1] | LATCH AS-DOOR (HOLD OPEN) | |
| 20. | 169-3995 | [1] | SEAL | |
| 21. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 22. | 352-4153 CY | [1] | WINDOW GP-CAB (SLIDING) | |
| 23. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 24. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 25. | 8T-4181 M | [5] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 28. | 9X-2042 M | [11] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 29. | 3E-3805 E | SEAL (420-CM) | ||
| 30. | 118-3094 M | [2] | BOSS-THREADED (M8X1.25-THD) | |
| 31. | 157-8861 | [2] | ROD-THREADED | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONTROL GP-PROPEL
Disassembly and Assembly
Propel Control (Direction, Speed) - Disassemble
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
Propel Control (Direction, Speed) - Assemble
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
Propel Control (Direction, Speed) - Remove
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
Propel Control (Direction, Speed) - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
Control Cable (Direction, Speed) - Remove and Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems
Service Magazine
Caterpillar Parts SIS Catalog CS-563E :
Truck sale:
90,640
