229-2863 PISTON & ROD GP S/N TXG1-UP; LHX24231-UP 18:1 COMPRESSION RATIO PART OF 241-5931, 357-6482 ENGINE AR-CORE ALSO AN ATTACHMENT RM-500

BASIC ENGINE

PISTON & ROD GP

0. 229-2863 PISTON & R

HOUSING GP-FRONT

1. 353-9979 PLATE AS-F

CYLINDER BLOCK GP

2. 230-5379 PLUG GP-CY
3. 305-9196 PLUG GP-CY

CYLINDER HEAD GP

4. 230-5378 PLUG GP-CY

CRANKSHAFT GP

5. 170-1757 PULLEY GP-

BELT TIGHTENER GP

6. 172-0988 PULLEY GP-

VALVE MECHANISM GP

7. 198-9898 ROCKER ARM
8. 278-1929 ROCKER ARM
9. 278-1931 ROCKER ARM
0. INFORMATION

RECLAIMER MIXER RM-500 RECLAIMER MIXER ASW
RM-500 Reclaimer Mixer ASW00001-UP (MACHINE) POWERED BY C15 Engine KEBP0276 RM-500 ASW (2006)

BASIC ENGINE

PISTON & ROD GP

229-2863 PISTON & ROD GP

#KEBP02760100

229-2863: PISTON & ROD GP

PISTON & ROD GP

229-2863 PISTON & ROD GP
S/N TXG1-UP; LHX24231-UP
18:1 COMPRESSION RATIO
PART OF 241-5931, 357-6482 ENGINE AR-CORE
ALSO AN ATTACHMENT

i03670560 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	151-5925	[1]	BOLT (7/16-14-THD)
2.	164-4187	[1]	RING-PISTON (INTERMEDIATE)
3.	524-5565	[1]	PIN-PISTON
4.	276-4637	[1]	TUBE AS-OIL JET
5.	224-3245	[1]	ROD AS
5A.	219-4458	[2]	PIN-DOWEL
5B.	213-3217 M	[4]	BOLT (M11X1.25X84-MM)
5C.	229-6259	[1]	BEARING
6.	261-3450	[1]	BEARING-CONNECTING ROD (STANDARD)
	232-3235 AB		BEARING-CONNECTING ROD (0.64-MM US)
	232-3236 AB		BEARING-CONNECTING ROD (1.27-MM US)
7.	388-9354 C	[1]	BODY AS-PISTON
8.	250-2940 C	[2]	RETAINER-PIN
9.	247-6130 C	[1]	RING-PISTON-TOP
10.	306-4014 C	[1]	RING-PISTON (OIL)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#KEBP02760101

353-9979: PLATE AS-FRONT HOUSING

PLATE AS-FRONT HOUSING

353-9979 PLATE AS-FRONT HOUSING
S/N TXG1-UP; LHX1-UP
PART OF 185-6343 HOUSING GP-FRONT
ALSO AN ATTACHMENT

i03839613 KEBP0276

3539979 PLATE AS-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	126-1757	[9]	WASHER (10.85X19.3X1.27-MM THK)
2.	129-5427	[2]	WASHER-SPECIAL (SEALING)
3.	129-5428	[12]	STUD (BRAKE)
4.	158-8881	[1]	PLATE
5.	334-6832	[2]	STUD-SPECIAL (BRAKE)

#KEBP02760102

230-5379: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

230-5379 PLUG GP-CYLINDER BLOCK
S/N TXG1-UP; LHX1-UP
PART OF 225-1523, 352-6171, 366-2132, 366-2133, 417-9324, 422-0089 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01966610 KEBP0276

2305379 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	353-5126	[3]	PLUG AS
			(EACH INCLUDES)
	9S-8005	[1]	PLUG (3/4-16-THD)
	6V-6609	[1]	SEAL-O-RING
2.	307-2671	[1]	PLUG AS
	9S-8002	[1]	PLUG (7/16-20-THD)
	214-7566	[1]	SEAL-O-RING
3.	307-2673	[6]	PLUG AS
			(EACH INCLUDES)
	9S-8005	[1]	PLUG (3/4-16-THD)
	238-5080	[1]	SEAL-O-RING
4.	309-5131	[1]	PLUG AS
	9S-8006	[1]	PLUG (7/8-14-THD)
	238-5081	[1]	SEAL-O-RING

#KEBP02760103

305-9196: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

305-9196 PLUG GP-CYLINDER BLOCK
S/N TXG1-UP; LHX10176-UP
PART OF 223-9252 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i02680401 KEBP0276

3059196 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	6V-5065	[1]	SEAL-O-RING
2.	9S-8010	[1]	PLUG

#KEBP02760104

230-5378: PLUG GP-CYLINDER HEAD

PLUG GP-CYLINDER HEAD

230-5378 PLUG GP-CYLINDER HEAD
S/N TXG1-UP; LHX1-UP
PART OF 225-1523, 352-6171, 366-2132, 366-2133, 417-9324, 422-0089 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01925203 KEBP0276

2305378 PLUG GP-CYLINDER HEAD Parts scheme

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	353-5125	[1]	PLUG AS
	6V-3251	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
2.	353-5126	[2]	PLUG AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	9S-8005	[1]	PLUG (3/4-16-THD)
3.	183-3407	[4]	PLUG AS
			(EACH INCLUDES)
	9S-8004	[1]	PLUG (9/16-18-THD)
	214-7568	[1]	SEAL-O-RING
4.	307-2673	[1]	PLUG AS
	9S-8005	[1]	PLUG (3/4-16-THD)
	238-5080	[1]	SEAL-O-RING

#KEBP02760105

170-1757: PULLEY GP-CRANKSHAFT

PULLEY GP-CRANKSHAFT

170-1757 PULLEY GP-CRANKSHAFT
S/N TXG1-UP; LHX1-UP
PART OF 225-1523, 352-6171, 366-2132, 366-2133, 417-9324, 422-0089 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01288019 KEBP0276

1701757 PULLEY GP-CRANKSHAFT Parts scheme

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	172-4848	[1]	PULLEY (8 GROOVE)
2.	7X-0345	[4]	BOLT (5/8-11X1.75-IN)

#KEBP02760106

172-0988: PULLEY GP-IDLER

PULLEY GP-IDLER

172-0988 PULLEY GP-IDLER
S/N TXG1-UP; LHX1-UP
PART OF 225-1523, 352-6171, 366-2132, 366-2133, 417-9324, 422-0089 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01288001 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-3443	[2]	BUSHING-TERMINAL
2.	151-0862	[1]	PULLEY AS-IDLER
2A.	124-7792	[1]	PULLEY AS-IDLER (8-GROOVE)(8 GROOVE)
2B.	145-2901	[1]	COVER-DUST
2C.	144-8123	[1]	SPACER-SPECIAL (26.05MM)
2D.	144-8122 M	[1]	BOLT-SPECIAL (M10X1.5X65-MM)
2E.	6V-9027	[1]	SEAL-O-RING
3.	175-4863	[1]	SUPPORT AS
4.	7X-2544 M	[2]	BOLT (M10X1.5X140-MM)
5.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4133 M	[2]	NUT (M10X1.5-THD)
7.	8T-7934	[2]	WASHER-HARD (11X21X5-MM THK)
	M		METRIC PART

#KEBP02760107

198-9898: ROCKER ARM GP

ROCKER ARM GP

198-9898 ROCKER ARM GP
S/N LHX1-4851
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE

i01768641 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0901	[1]	SHAFT AS-ROCKER ARM
	4B-9782	[2]	BALL
2.	276-5317	[4]	NUT (3/8-24-THD)
3.	258-8721	[4]	BUTTON
4.	192-4151 BW	[2]	BUTTON (24-MM OD)
			-OR-
	4P-7371 BJ	[2]	INSERT (14.75-MM OD)
5.	196-5069 BW	[2]	SCREW-ARM ADJUSTMENT (9/16-18X2-IN)
			-OR-
	4P-4278 BJ	[2]	SCREW-UNIT INJ ADJUSTMENT
6.	196-5070 BW	[2]	NUT-JAM (9/16-18-THD)
			-OR-
	4P-4279 BJ	[2]	NUT-JAM (7/8-18-THD)
7.	232-0253	[4]	SCREW-ARM ADJUSTMENT (3/8-24X1.20-IN)
8.	203-8822	[2]	ROCKER ARM AS (EXHAUST VALVE ROCKER)
9.	203-8824	[2]	ROCKER ARM AS (INLET VALVE ROCKER)
10.	207-5248 B	[2]	ROCKER ARM AS (UNIT INJECTOR ROCKER)
11.	061-8639 BW	[2]	SEAL-O-RING
			-OR-
	032-9313 BJ	[2]	SEAL-O-RING
12.	8L-2777	[4]	SEAL-O-RING
	B		USE AS REQUIRED
	J		PARTS MARKED J MUST BE USED TOGETHER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	W		PARTS MARKED W MUST BE USED TOGETHER

#KEBP02760108

278-1929: ROCKER ARM GP

ROCKER ARM GP

278-1929 ROCKER ARM GP
S/N LHX4863-24917
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE

i02430984 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	307-8322	[1]	SHAFT AS-ROCKER ARM
	4B-9782	[2]	BALL
2.	276-5317	[4]	NUT (3/8-24-THD)
3.	192-4151	[2]	BUTTON (24-MM OD)
4.	196-5069	[2]	SCREW-ARM ADJUSTMENT (9/16-18X2-IN)
5.	196-5070	[2]	NUT-JAM (9/16-18-THD)
6.	203-8824	[2]	ROCKER ARM AS (INLET VALVE ROCKER)
6A.	203-8824	[2]	ROCKER ARM AS (EXHAUST VALVE ROCKER)
7.	274-4491	[4]	SCREW-ARM ADJUSTMENT (3/8-24X1.20-IN)
8.	258-8721	[4]	BUTTON
9.	278-1365	[2]	ROCKER ARM AS (UNIT INJECTOR ROCKER)
10.	061-8639	[2]	SEAL-O-RING
11.	8L-2777	[4]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#KEBP02760109

278-1931: ROCKER ARM GP

ROCKER ARM GP

278-1931 ROCKER ARM GP
S/N LHX4852-4862
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE

i02473411 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	307-8322	[1]	SHAFT AS-ROCKER ARM
	4B-9782	[2]	BALL
2.	276-5317	[4]	NUT (3/8-24-THD)
3.	192-4151	[2]	BUTTON
4.	196-5069	[2]	SCREW-ARM ADJUSTMENT (9/16-18X2-IN)
5.	196-5070	[2]	NUT-JAM (9/16-18-THD)
6.	203-8824	[2]	ROCKER ARM AS (INLET VALVE ROCKER)
7.	274-4491	[4]	SCREW-ARM ADJUSTMENT (3/8-24X1.20-IN)
8.	258-8721	[4]	BUTTON
9.		[2]	ROCKER ARM AS (EXHAUST VALVE ROCKER)
10.	278-1365	[2]	ROCKER ARM AS (UNIT INJECTOR ROCKER)
11.	061-8639	[2]	SEAL-O-RING
12.	8L-2777	[4]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

BASIC ENGINE

PISTON & ROD GP

Special Instruction

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}

Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Specifications

Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines

Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines

Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines

Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines

Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines

Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines

Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines

Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines

Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines

Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Information Release Memo

CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK/SHORT BLOCK OPTIONS FOR C15 ENGINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK/SHORT BLOCK OPTIONS FOR C15 ENGINE APPLICATIONS

Testing and Adjusting

Engine Crankcase Pressure (Blowby) - Test
C15 and C18 Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines

Connecting Rod Bearings - Inspect
C15 and C18 Engines for Caterpillar Built Machines

Cylinder Liner Projection - Inspect
C15 and C18 Engines for Caterpillar Built Machines

Piston Ring Groove - Inspect
C15 and C18 Engines for Caterpillar Built Machines

Disassembly and Assembly

Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines

Connecting Rod Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines

Connecting Rod Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Disassemble
C15 and C18 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Assemble
C15 and C18 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Remove
C15 and C18 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Install
C15 and C18 Engines for Caterpillar Built Machines

Service Magazine

New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog RM-500 :

229-2863 PISTON & ROD GP

196-2111 PAN GP-OIL

353-9979 PLATE AS-FRONT HOUSING

230-5379 PLUG GP-CYLINDER BLOCK

305-9196 PLUG GP-CYLINDER BLOCK

230-5378 PLUG GP-CYLINDER HEAD

170-1757 PULLEY GP-CRANKSHAFT

172-0988 PULLEY GP-IDLER

198-9898 ROCKER ARM GP

278-1929 ROCKER ARM GP

Truck sale:

Caterpillar RM-500
- stabilizers / reclaimers
BERGERAT MONNOYEUR SP. Z O.O.

527,850

Caterpillar RM500B, stabilizers / reclaimers, Construction
- stabilizers / reclaimers
BLANCHARD MACHINERY CO.

152,369

Caterpillar RM-500, stabilizers / reclaimers, Construction

427,850

Caterpillar RM500B, stabilizers / reclaimers, Construction

445,000

Caterpillar RM500B, stabilizers / reclaimers, Construction